Works matching DE "ALLOYS"

Results: 5000

Microstructure and Tribological Behavior of NiCoCrTi0.5Nb0.5 –xSiO2 High-Entropy Alloy Based Composite Coatings.

Published in:

Physics of Metals & Metallography, 2025, v. 126, n. 2, p. 200, doi. 10.1134/S0031918X24600544

By:

Zhang, Y.;
Hou, W. T.;
Yu, J. C.;
Fan, B. W.

Publication type:

Article

Effect of electromagnetic stirring method on flow characteristics of A356 aluminum alloy melt.

Published in:

International Journal of Lightweight Materials & Manufacture, 2025, v. 8, n. 3, p. 321, doi. 10.1016/j.ijlmm.2024.12.004

By:

ZeWen Li;
Hao Chen;
Zheng Liu

Publication type:

Article

Pulse current coupled hydrogen used to suppress the variant selection behavior of titanium alloy in the aging treatment.

Published in:

Journal of Materials Science, 2025, v. 60, n. 21, p. 8934, doi. 10.1007/s10853-025-10958-8

By:

Ma, Rui;
Li, Biqian;
Zhou, Mengcheng;
Zhang, Xinfang

Publication type:

Article

Evolution of structure and properties of iron–carbon alloys produced by aluminothermy at differentiation of fractional composition of charge materials.

Published in:

Metallurgist, 2025, v. 68, n. 11, p. 1743, doi. 10.1007/s11015-025-01888-6

By:

Barsukova, N. V.;
Popov, A. V.;
Komarov, O. N.

Publication type:

Article

Impact of laser hardening on surface properties of billets from structural materials.

Published in:

Metallurgist, 2025, v. 68, n. 11, p. 1725, doi. 10.1007/s11015-025-01886-8

By:

Naprimerova, E. D.;
Yu. Pashkeev, K.;
Yurasova, E. V.;
Litvinyuk, K. S.;
Trofimova, S. N.;
Samodurova, M. N.

Publication type:

Article

Thermophysical Property Measurements of Liquid Nickel-Based Alloys by an Electrostatic Levitator.

Published in:

International Journal of Microgravity Science & Application, 2025, v. 42, n. 1, p. 1, doi. 10.15011/jasma.42.420101

By:

WATANABE, Yuki;
KOYAMA, Chihiro;
ISHIKAWA, Takehiko;
PARADIS, P. F.

Publication type:

Article

On the Work-Hardening Behavior and Tensile Properties of a TWIP Steel when Cu or Al is Introduced into the Alloy Composition.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 7, p. 2665, doi. 10.1007/s11661-025-07812-6

By:

Druker, A. V.;
Giordana, M. F.;
De Vincentis, N.;
Sklate Boja, M. F.;
Malarría, J.

Publication type:

Article

Phase Transformation Pathways and Mechanical Behavior of Heat-Treated Direct Metal Laser Sintered Additively Manufactured Ti6Al4V Alloy.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 7, p. 2705, doi. 10.1007/s11661-025-07801-9

By:

Mahto, Bishnu Prasad;
Tripathi, Abhishek;
Rao, A. G.;
Kumar, Rajiv;
Rai, R. K.;
Mishra, M. K.

Publication type:

Article

In Situ Observation of Gravity and Size Effects on Thermo-Solutal Convection During Directional Solidification.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 7, p. 2307, doi. 10.1007/s11661-025-07789-2

By:

Wang, Di;
Wang, Jingzhe;
Chen, Bowen;
Ma, Dexin;
Deng, Wenkai;
Zhao, Yunxing;
Xu, Weitai;
Liu, Yong;
Huang, Zaiwang

Publication type:

Article

Effect of Stress State on Plastic Behavior, Deformation Mechanism, and Texture Evolution of an Mg–Gd–Y Alloy.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 7, p. 2329, doi. 10.1007/s11661-025-07783-8

By:

Wu, Pengfei;
Lou, Yanshan

Publication type:

Article

γ-TiAl合金的加工特性及能场辅助技术研究进展.

Published in:

China Mechanical Engineering, 2025, v. 36, n. 4, p. 636, doi. 10.3969/j.issn.l004-132X.2025.04.001

By:

范滔;
姚倡锋;
谭靓

Publication type:

Article

Effects of Cr Doping on the Physical Properties of Ga1−xCrxAs Alloys: An Ab Initio Study.

Published in:

Physica Status Solidi (B), 2025, v. 262, n. 6, p. 1, doi. 10.1002/pssb.202400644

By:

Biskri, Zine Elabidine;
Moderres, Mourad;
Rached, Habib;
Caid, Messaoud;
Rached, Djamel;
Rached, Youcef;
Mahmoud, Nada Talal;
Al‐Qaisi, Samah

Publication type:

Article

利用压缩实验研究铀钼合金热变形行为.

Published in:

Atomic Energy Science & Technology, 2025, v. 59, n. 4, p. 884, doi. 10.7538/yzk.2024.youxian.0584

By:

胡秉坤;
李明阳;
何亚斌;
杜艳华

Publication type:

Article

Microstructure and oxidation behaviour of Mo–Si–B–Hf alloys at 800 °C and 1100 °C.

Published in:

Materials Science & Technology, 2025, v. 41, n. 10, p. 710, doi. 10.1177/02670836241266451

By:

Sun, Shuo;
Lin, Xiaohui;
Gao, Xuanqiao;
Li, Yanchao;
Liang, Jing;
Zai, Wei;
Zhang, Wen

Publication type:

Article

Measuring the Marginal Gap of Pre-Cemented All-Metal Single Crowns: A Systematic Review of In Vitro Studies.

Published in:

Dentistry Journal, 2025, v. 13, n. 5, p. 204, doi. 10.3390/dj13050204

By:

Dudley, James;
Farook, Taseef Hasan

Publication type:

Article

Influence of Heat Transfer on Stress Components in Metallic Plates Weakened by Multi-Curved Holes.

Published in:

Axioms (2075-1680), 2025, v. 14, n. 5, p. 369, doi. 10.3390/axioms14050369

By:

Alharbi, Faizah M.;
Alhendi, Nafeesa G.

Publication type:

Article

Nanoporous CuAuPtPd Quasi-High-Entropy Alloy Prism Arrays for Sustainable Electrochemical Nitrogen Reduction.

Published in:

Metals (2075-4701), 2025, v. 15, n. 5, p. 568, doi. 10.3390/met15050568

By:

Hou, Shuping;
Meng, Ziying;
Zhao, Weimin;
Wang, Zhifeng

Publication type:

Article

Impact of Melt Refining on Secondary Al-Si Alloys' Microstructure and Tensile Mechanical Performance.

Published in:

Metals (2075-4701), 2025, v. 15, n. 5, p. 556, doi. 10.3390/met15050556

By:

Gu, Wei;
Jin, Huixin;
Wang, Xue;
Jiang, Jiajun

Publication type:

Article

Influence of Si Content on Microstructure and Mechanical Properties of CoCrFeNi High-Entropy Alloys.

Published in:

Metals (2075-4701), 2025, v. 15, n. 5, p. 538, doi. 10.3390/met15050538

By:

Zhou, Yajun;
Zhao, Ruifeng;
Ren, Bo;
Jiang, Aiyun;
Liu, Zhongxia;
Liu, Jianxiu

Publication type:

Article

Optimising Additive Manufacturing of NiTi and NiMnGa Shape Memory Alloys: A Review.

Published in:

Metals (2075-4701), 2025, v. 15, n. 5, p. 488, doi. 10.3390/met15050488

By:

Ramezannejad, Ali;
East, Daniel;
Murphy, Anthony Bruce;
Lu, Guoxing;
Yang, Kun Vanna

Publication type:

Article

Quantitative Microstructure of Multiphase Al-Zn-Si-(Mg) Coatings and Their Effects on Sacrificial Protection for Steel.

Published in:

Metals (2075-4701), 2025, v. 15, n. 5, p. 476, doi. 10.3390/met15050476

By:

Adinolfi Colpaert Sartori, Guilherme;
Remy, Blandine;
Machado Amorim, Tiago;
Volovitch, Polina

Publication type:

Article

DETERMINATION OF THE CRITICAL EFFECTIVE STRAIN OF AA1050-O ALLOY TO PREDICT NECKING UNDER COLD PLASTIC DEFORMATION.

Published in:

MM Science Journal, 2025, p. 8245, doi. 10.17973/MMSJ.2025_06_2025003

By:

MARTIN MACKO;
LAI DANG GIANG;
TRAN DUC HOAN;
NGUYEN VAN CHINH;
TO THANH LOAN;
TRAN DINH DUNG

Publication type:

Article

Highlights on the Role of Fe, Sr, and Solidification Time on Porosity Formation in Al–Si Cast Alloys.

Published in:

International Journal of Metalcasting, 2025, v. 19, n. 3, p. 1803, doi. 10.1007/s40962-024-01409-2

By:

Samuel, E.;
Samuel, A. M.;
Doty, H. W.;
Valtierra, S.;
Samuel, F. H.

Publication type:

Article

Study on the Precipitation Strengthening Mechanism of Mg–10Zn–5Al–0.2Sc Alloy.

Published in:

International Journal of Metalcasting, 2025, v. 19, n. 3, p. 1579, doi. 10.1007/s40962-024-01406-5

By:

Jiang, A. X.;
You, Z. Y.;
Jin, S. S.;
Zhang, Y. G.;
Zhang, M. J.;
Wang, K. Y.

Publication type:

Article

Study on Stress–Strain and Hot Tearing of Liquid Film Between Single Grains of High-Silicon Aluminum Alloy.

Published in:

International Journal of Metalcasting, 2025, v. 19, n. 3, p. 1378, doi. 10.1007/s40962-024-01379-5

By:

Zhou, Zhujie;
Fang, Xiaogang;
Ma, Zhili;
Zhang, Kaixuan;
Yu, Junchao;
Chen, Yiqing

Publication type:

Article

Microstructure Evolution and Corresponding Mechanism of Al–Si–Mg–Cu Alloy with Addition of Mn/Mn+Cr.

Published in:

International Journal of Metalcasting, 2025, v. 19, n. 3, p. 1339, doi. 10.1007/s40962-024-01377-7

By:

Qian, Dongling;
Yang, Yitao

Publication type:

Article

Revealing the Role of Minor Zn and Zr Element Addition in Hot Tearing Susceptibility of Mg–Gd–Y Alloy.

Published in:

International Journal of Metalcasting, 2025, v. 19, n. 3, p. 1481, doi. 10.1007/s40962-024-01344-2

By:

Li, Bingcheng;
Zhang, Jing;
Dong, Quan;
Ye, Fawang

Publication type:

Article

A comprehensive evaluation of tool wear progression and built-up layer formation in sustainable dry machining of AZ61 magnesium alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 138, n. 7, p. 3021, doi. 10.1007/s00170-025-15607-7

By:

Alshibi, Assem;
Pervaiz, Salman;
Khan, Aqib Mashood;
Khan, Ahmar;
Jamil, Muhammad

Publication type:

Article

Microscopic Mechanisms of Plastic Deformation in Ti3Pt.

Published in:

Journal of Materials Science & Engineering (1673-2812), 2025, v. 43, n. 2, p. 187, doi. 10.14136/j.cnki.issn1673-2812.2025.02.003

By:

QI Xu;
YU Qian

Publication type:

Article

超声旋转微锻造增材件数值模拟.

Published in:

Journal of Northeastern University (Natural Science), 2025, v. 46, n. 2, p. 57, doi. 10.12068/j.issn.1005-3026.2025.20240039

By:

任朝晖;
贾昌烨;
武志伦;
王云贺

Publication type:

Article

Insight into Various Casting Material Selections in Rapid Investment Casting for Making EDM Electrodes.

Published in:

Micromachines, 2025, v. 16, n. 5, p. 595, doi. 10.3390/mi16050595

By:

Nguyen, Thanh Tan;
Nguyen, Van-Thuc;
Tran, Van Tron;
Le, Anh Thi;
Nguyen, Thanh Duy;
Huynh, Quoc Dung;
Ho, Minh Tri;
Dang, Minh Phung;
Le, Hieu Giang;
Nguyen, Van Thanh Tien

Publication type:

Article

Design and Contact Performance Analysis of 3D-Printed Alloy Metal Inertial Micro Switch.

Published in:

Micromachines, 2025, v. 16, n. 5, p. 560, doi. 10.3390/mi16050560

By:

Li, Jinghao;
Li, Zhipeng;
Chen, Hejuan

Publication type:

Article

The Influence of Grain Structure on Mechanical Properties of LPBF AlSi10Mg Alloy Obtained via Conventional and KOBO Extrusion Process.

Published in:

Symmetry (20738994), 2025, v. 17, n. 5, p. 709, doi. 10.3390/sym17050709

By:

Snopiński, Przemysław;
Ostachowski, Paweł;
Matus, Krzysztof;
Żaba, Krzysztof

Publication type:

Article

Simulation Study on the Impact of Melt Track Overlap Rate on the Forming Result During the Selective Laser Melting of Ti-6Al-4V Alloy.

Published in:

Materials (1996-1944), 2025, v. 18, n. 10, p. 2314, doi. 10.3390/ma18102314

By:

Liu, Chen;
Huang, Weidong;
Wang, Hui;
Lin, Zebin;
Lai, Zhiyuan

Publication type:

Article

Study on the Sealing Performance of a Composite Plugging System Comprising Cement and Sn58Bi Alloy for Wellbore Applications.

Published in:

Materials (1996-1944), 2025, v. 18, n. 10, p. 2301, doi. 10.3390/ma18102301

By:

Zha, Chunqing;
Zhang, Zhengyang;
Wang, Wei;
Liu, Gonghui;
Li, Jun;
Liu, Wei

Publication type:

Article

Effect of Cu/Li Ratio on Mechanical Properties and Corrosion Behavior of Sc-Containing Al-Cu-Li Alloys.

Published in:

Materials (1996-1944), 2025, v. 18, n. 10, p. 2254, doi. 10.3390/ma18102254

By:

Li, Changlin;
Li, Xiwu;
Zhang, Yongan;
Wen, Kai;
Yan, Lizhen;
Li, Ying;
Li, Yanan;
Yu, Mingyang;
Gao, Guanjun;
Yan, Hongwei;
Li, Zhihui;
Xiong, Baiqing

Publication type:

Article

Influence of Cu Content on Precipitation Behavior and Mechanical Properties Under Aging Treatment of Al-Cu-Li Alloys.

Published in:

Materials (1996-1944), 2025, v. 18, n. 10, p. 2172, doi. 10.3390/ma18102172

By:

Chen, Pengcheng;
Li, Xiwu;
Lin, Haitao;
Wen, Kai;
Li, Ying;
Wang, Shuyan;
Xun, Chenyang;
Li, Changlin;
Yan, Lizhen;
Zhang, Yongan;
Xiong, Baiqing

Publication type:

Article

The Anisotropic Osteoinductive Capacity of a Nickel–Titanium Alloy Fabricated Through Laser Powder Bed Fusion.

Published in:

International Journal of Molecular Sciences, 2025, v. 26, n. 10, p. 4640, doi. 10.3390/ijms26104640

By:

Sun, Yu;
Yu, Zhenglei;
Liu, Qingping;
Ren, Luquan;
Zhao, Xin;
Wang, Jincheng

Publication type:

Article

In‐Depth Discussion on Electrocatalytic Barrier with Electron Structure of High‐Entropy Alloy Predicted by Transfer Learning and Neural Networks.

Published in:

Advanced Functional Materials, 2025, v. 35, n. 22, p. 1, doi. 10.1002/adfm.202423732

By:

Li, Chen;
Zhang, Rui;
Ma, Peijie;
Zheng, Kun

Publication type:

Article

Processing—microstructure—functional properties correlation for NiTi-based pseudoelastic shape memory alloy.

Published in:

Journal of Materials Science, 2025, v. 60, n. 20, p. 8515, doi. 10.1007/s10853-025-10894-7

By:

Arohi, Adya Charan;
Nayak, Priyadarshini;
Punyamanthula, Kranti Kumar;
Ramesh, Surla;
Tarafder, Soumitra;
Frenzel, Jan;
Sen, Indrani

Publication type:

Article

Evaluation of Orthodontic Mini-Implants' Stability Based on Insertion and Removal Torques: An Experimental Study.

Published in:

Bioengineering (Basel), 2025, v. 12, n. 5, p. 549, doi. 10.3390/bioengineering12050549

By:

Sousa-Santos, Primavera;
Sousa-Santos, Sofia;
Oliveira, Ana Catarina;
Queirós, Cíntia;
Mendes, Joana;
Aroso, Carlos;
Mendes, José Manuel

Publication type:

Article

Peculiarities of Atomic Migration in the Near-Surface Layers of the 2099 Al-Cu-Li Alloy during Ultrasonic Impact Treatment.

Published in:

Metallophysics & Advanced Technologies / Metallofizika i Novejsie Tehnologii, 2025, v. 47, n. 4, p. 405, doi. 10.15407/mfint.47.04.0405

By:

Filatov, O. V.;
Mazanko, V. F.;
Bogdanov, S. Ye.;
Mordyuk, B. M.;
Bogdanov, Ye. I.;
Vorona, S. P.;
Kaczmarek, L.;
Klich, M.

Publication type:

Article

Competition between the Formation and Decomposition of a Solid Solution in Al–Cu Alloys under High-Pressure Torsion.

Published in:

JETP Letters, 2025, v. 121, n. 8, p. 619, doi. 10.1134/S0021364025605822

By:

Straumal, B. B.;
Kogtenkova, O. A.;
Gornakova, A. S.;
Khorosheva, M. A.;
Straumal, P. B.;
Prokofiev, P. A.;
Bradai, D.;
Kilmametov, A. R.

Publication type:

Article

Enhanced iron impurity removal in low iron Al-Si alloys by Mn addition.

Published in:

High Temperatures - High Pressures, 2025, v. 54, n. 2, p. 187, doi. 10.32908/hthp.v54.1905

By:

HARAZEEN, ABDULLAH;
LATTANZI, LUCIA;
MATSUSHITA, TAISHI;
JARFORS, ANDERS E. W.

Publication type:

Article

Structure evolution during the heating processes of Fe-based amorphous alloys induced by low power laser treatment.

Published in:

High Temperatures - High Pressures, 2025, v. 54, n. 2, p. 113, doi. 10.32908/hthp.v54.1927

By:

SHTABLAVYI, IHOR;
NYKYRUY, YULIA;
KULYK, YURI;
KOVALSKYI, OLEH;
PLEVACHUK, YURIY;
MUDRY, STEPAN

Publication type:

Article

Functional Biomaterials: Scaffolds for Innovative Treatments.

Published in:

Journal of Functional Biomaterials, 2025, v. 16, n. 5, p. 154, doi. 10.3390/jfb16050154

By:

Scheau, Cristian;
Didilescu, Andreea Cristiana;
Caruntu, Constantin

Publication type:

Article

Evaluating Machine Learning Models for Predicting Hardness of AlCoCrCuFeNi High-Entropy Alloys.

Published in:

Crystals (2073-4352), 2025, v. 15, n. 5, p. 404, doi. 10.3390/cryst15050404

By:

Paturi, Uma Maheshwera Reddy;
Ishtiaq, Muhammad;
Lakshmi Narayana, Pasupuleti;
Maurya, Anoop Kumar;
Choi, Seong-Woo;
Reddy, Nagireddy Gari Subba

Publication type:

Article

Strong Polar Optical Phonon Screening and Softening Enhance the Thermoelectric Performance of Zintl Compounds.

Published in:

Advanced Energy Materials, 2025, v. 15, n. 20, p. 1, doi. 10.1002/aenm.202405024

By:

Guo, Muchun;
Liu, Ming;
Yuan, Donglin;
Chen, Hong;
Sun, Chenyue;
Zhang, Qinyong;
Zhu, Yuke;
Guo, Fengkai;
Yu, Yuan;
Sui, Jiehe

Publication type:

Article

On the Plasticity of Bimodal Structures in Titanium Alloys.

Published in:

Materials Transactions, 2025, v. 66, n. 5, p. 479, doi. 10.2320/matertrans.MT-MC2024019

By:

Banerjee, Arunima;
Zhao, Zhuowen;
Balachandran, Shanoob;
Eisenlohr, Philip;
Banerjee, Dipankar

Publication type:

Article

Comparing Initial Wound Healing and Osteogenesis of Porous Tantalum Trabecular Metal and Titanium Alloy Materials.

Published in:

Journal of Oral Implantology, 2019, v. 45, n. 3, p. 173, doi. 10.1563/aaid-joi-D-17-00258

By:

Bencharit, Sompop;
Morelli, Thiago;
Barros, Silvana;
Seagroves, Jackson T.;
Kim, Steven;
Yu, Ning;
Byrd, Kevin;
Brenes, Christian;
Offenbacher, Steven

Publication type:

Article