Probabilistic considerations for growth and detection of cracks from rivet holes in a lap joint.
- Published in:
- Aeronautical Journal, 2013, v. 117, n. 1193, p. 727, doi. 10.1017/S0001924000008393
- By:
- Publication type:
- Article
Works matching DE "LAP joints"
Results: 651
1
2
A coupled stress and energy failure model for crack initiation in arbitrarily shaped adhesive lap joints.
- Published in:
- PAMM: Proceedings in Applied Mathematics & Mechanics, 2016, v. 16, n. 1, p. 175, doi. 10.1002/pamm.201610076
- By:
- Publication type:
- Article
3
On the evaluation of a critical distance approach for failure load prediction of adhesively bonded dissimilar materials.
- Published in:
- Continuum Mechanics & Thermodynamics, 2020, v. 32, n. 6, p. 1647, doi. 10.1007/s00161-020-00871-7
- By:
- Publication type:
- Article
4
Research of Fretting Fatigue Characteristics of a Fiber Metal Laminate – A Steel Single-Lap Joint.
- Published in:
- Strength of Materials, 2021, v. 53, n. 4, p. 582, doi. 10.1007/s11223-021-00320-z
- By:
- Publication type:
- Article
5
Refined Mathematical Model of the Stress State of Adhesive Lap Joint: Experimental Determination of the Adhesive Layer Strength Criterion.
- Published in:
- Strength of Materials, 2020, v. 52, n. 5, p. 779, doi. 10.1007/s11223-020-00231-5
- By:
- Publication type:
- Article
6
Correction to: Weldablity of the lap joint between a 5182 aluminum alloy and a DP1180 two-phase steel sheet.
- Published in:
- 2020
- By:
- Publication type:
- Correction Notice
7
Weldablity of the Lap Joint between a 5182 Aluminum Alloy and a DP1180 Two-Phase Steel Sheet.
- Published in:
- Strength of Materials, 2020, v. 52, n. 4, p. 573, doi. 10.1007/s11223-020-00209-3
- By:
- Publication type:
- Article
8
Application of the Point Stress Criterion to Assess the Bond Strength of a Single-Lap Joint.
- Published in:
- Strength of Materials, 2014, v. 46, n. 4, p. 518, doi. 10.1007/s11223-014-9577-z
- By:
- Publication type:
- Article
9
Simulation study of experimental loading system for large scale plate frame axial compression load.
- Published in:
- Experimental Technology & Management, 2023, v. 40, n. 6, p. 109, doi. 10.16791/j.cnki.sjg.2023.06.017
- By:
- Publication type:
- Article
10
Dissimilar Laser Beam Welding of Titanium to Stainless Steel Using Pure Niobium as Filler Material in Lap Joint Configuration.
- Published in:
- Photonics, 2023, v. 10, n. 9, p. 1063, doi. 10.3390/photonics10091063
- By:
- Publication type:
- Article
11
RESISTANCE AND STIFFNESS OF BLIND BOLT LAP JOINTS IN COLD-FORMED STEEL STRUCTURES.
- Published in:
- Technical Transactions / Czasopismo Techniczne, 2016, v. 2-B, p. 197, doi. 10.4467/2353737XCT.16.169.5780
- By:
- Publication type:
- Article
12
Synthesis and formulation of modified milk protein and its study as an adhesive for wood binding.
- Published in:
- Journal of Polymer Engineering, 2025, v. 45, n. 2, p. 176, doi. 10.1515/polyeng-2024-0167
- By:
- Publication type:
- Article
13
Experimental Investigation on the Post-fire Behavior of Fillet Welds in the Welded Connections.
- Published in:
- Fire Technology, 2022, v. 58, n. 4, p. 1995, doi. 10.1007/s10694-022-01238-x
- By:
- Publication type:
- Article
14
Creep Modeling of Transverse Welded Lap Joints Exposed to Fire Temperatures.
- Published in:
- Fire Technology, 2022, v. 58, n. 1, p. 457, doi. 10.1007/s10694-021-01152-8
- By:
- Publication type:
- Article
15
Effect of Creep on Shear Tab Connections under Fire Temperatures.
- Published in:
- Fire Technology, 2021, v. 57, n. 5, p. 2515, doi. 10.1007/s10694-021-01127-9
- By:
- Publication type:
- Article
16
Mechanical Characterization of Friction-Stir-Welded Aluminum AA7010 Alloy with TiC Nanofiber.
- Published in:
- Advances in Materials Science & Engineering, 2023, v. 2023, p. 1, doi. 10.1155/2023/1466963
- By:
- Publication type:
- Article
17
Experimental investigations ANN and GEP modeling of failure load for AA7075-T6/CFRP adhesive bond.
- Published in:
- Neural Computing & Applications, 2023, v. 35, n. 28, p. 20923, doi. 10.1007/s00521-023-08796-3
- By:
- Publication type:
- Article
18
A 19th-Century Timber Buoy from Portsmouth Harbour.
- Published in:
- International Journal of Nautical Archaeology, 2022, v. 51, n. 2, p. 403, doi. 10.1080/10572414.2022.2122674
- By:
- Publication type:
- Article
19
Ultrasonic welding of lap joints of PEI plates with PEI/CF-fabric prepregs.
- Published in:
- Fracture & Structural Integrity, 2024, n. 68, p. 390, doi. 10.3221/IGF-ESIS.68.26
- By:
- Publication type:
- Article
20
Effect of nylon fabric reinforcement on the mechanical performance of adhesive joints made between glass and GFRP.
- Published in:
- Fracture & Structural Integrity, 2022, n. 59, p. 89, doi. 10.3221/IGF-ESIS.59.07
- By:
- Publication type:
- Article
21
Unified methodology for characterisation of global fatigue damage evolution in adhesively bonded joints.
- Published in:
- Fracture & Structural Integrity, 2020, n. 53, p. 26, doi. 10.3221/IGF-ESIS.53.03
- By:
- Publication type:
- Article
22
Experimental and numerical analysis of epoxy based adhesive failure on mono- and bi-material single lap joints under different displacement rates.
- Published in:
- Fracture & Structural Integrity, 2020, n. 52, p. 9, doi. 10.3221/IGF-ESIS.52.02
- By:
- Publication type:
- Article
23
Using a cohesive zone modeling to predict the compressive and tensile behavior on the failure load of single lap bonded joint.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 112, doi. 10.3221/IGF-ESIS.50.11
- By:
- Publication type:
- Article
24
Innovative geometric design improves the resistance of simple metal / metal lap joint.
- Published in:
- Fracture & Structural Integrity, 2019, n. 48, p. 491, doi. 10.3221/IGF-ESIS.48.47
- By:
- Publication type:
- Article
25
Development of hybrid friction stir welding and adhesive bonding single lap joints in aluminium alloys.
- Published in:
- Fracture & Structural Integrity, 2019, n. 48, p. 269, doi. 10.3221/IGF-ESIS.48.28
- By:
- Publication type:
- Article
26
Experimental characterization and numerical modelling analyses of nano-adhesive-bonded joints.
- Published in:
- Fracture & Structural Integrity, 2018, v. 12, p. 94, doi. 10.3221/IGF-ESIS.44.08
- By:
- Publication type:
- Article
27
Finite Element Analysis of Strap Lap Bonding Joints for Wood Powder/Polyethylene Composites with Combined Surface Treatment.
- Published in:
- BioResources, 2020, v. 15, n. 2, p. 3112, doi. 10.15376/biores.15.2.3112-3124
- By:
- Publication type:
- Article
28
The Lap Joint Shear Strength of Wood Materials Bonded by Cellulose Fiber-Reinforced Polyvinyl Acetate.
- Published in:
- BioResources, 2014, v. 9, n. 1, p. 1179, doi. 10.15376/biores.9.1.1179-1188
- By:
- Publication type:
- Article
29
Optimization and Simulation Research of Tensile Properties of Wood Lap Joint.
- Published in:
- BioResources, 2013, v. 8, n. 1, p. 1409, doi. 10.15376/biores.8.1.1409-1419
- By:
- Publication type:
- Article
30
Electrical and Superconducting Properties in Lap Joints for YBCO Tapes.
- Published in:
- Journal of Superconductivity & Novel Magnetism, 2013, v. 26, n. 5, p. 2089, doi. 10.1007/s10948-012-1905-6
- By:
- Publication type:
- Article
31
Mechanical properties and failure analysis of refill friction stir spot-welded 5052/2A12 joints.
- Published in:
- Materials Science & Technology, 2022, v. 38, n. 18, p. 1573, doi. 10.1080/02670836.2022.2093001
- By:
- Publication type:
- Article
32
Effect of dwell time on mechanical and metallurgical behavior of dissimilar FSSWed Cu-S355 JR lap joints.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2025, v. 138, n. 3, p. 873, doi. 10.1007/s00170-025-15565-0
- By:
- Publication type:
- Article
33
A comprehensive experimental study of the potential use of 3D printable thermoplastic polymers as structural adhesives.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 11, p. 6073, doi. 10.1007/s00170-025-15532-9
- By:
- Publication type:
- Article
34
Experimental and numerical study on fusion zone in the laser welding process of AA6061-T6 overlap joint: using smoothed particle hydrodynamics (SPH).
- Published in:
- International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1527, doi. 10.1007/s00170-024-14934-5
- By:
- Publication type:
- Article
35
Formation mechanism of pore defects and surface ripples under different process parameters via laser powder bed fusion by numerical simulation and experimental verification.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 1/2, p. 883, doi. 10.1007/s00170-024-14516-5
- By:
- Publication type:
- Article
36
Microscopic and Mechanical Properties Characterization of Laser Beam Welded 5754 to 6063 Aluminum Alloys.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 3/4, p. 1869, doi. 10.1007/s00170-024-13471-5
- By:
- Publication type:
- Article
37
Effect of a novel pin tool with large diameter disc on the microstructure and mechanical properties of Al/Mg dissimilar friction stir lap joint.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5251, doi. 10.1007/s00170-024-12970-9
- By:
- Publication type:
- Article
38
Improvement of electrical and mechanical properties of laser welded lap joints via dimensional optimization.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 3/4, p. 1843, doi. 10.1007/s00170-023-12786-z
- By:
- Publication type:
- Article
39
Influence of process parameters on joint characteristics in friction stir welding of Al/Cu dissimilar materials for lithium-ion battery.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 3/4, p. 1151, doi. 10.1007/s00170-023-12699-x
- By:
- Publication type:
- Article
40
Joining of polymer to metal using material extrusion additive manufacturing.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3303, doi. 10.1007/s00170-023-12409-7
- By:
- Publication type:
- Article
41
Improvement of fatigue performance by applying tandem GMAW in lap joints with gaps.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2123, doi. 10.1007/s00170-023-12057-x
- By:
- Publication type:
- Article
42
The role of filler wire and scanning strategy in laser welding of difficult-to-weld aluminum alloys.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 1/2, p. 763, doi. 10.1007/s00170-023-11932-x
- By:
- Publication type:
- Article
43
Friction stir spot welding of aluminum and steel sheets using a consumable sheet.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 1/2, p. 221, doi. 10.1007/s00170-023-11863-7
- By:
- Publication type:
- Article
44
Influences of various parameters on shear stiffness of bolted joints subjected to shear load.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 11/12, p. 5139, doi. 10.1007/s00170-023-11783-6
- By:
- Publication type:
- Article
45
Experimental and numerical investigation on temperature field and joint tensile failure for CF/PPS-Al alloy interlocking induction welding.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 795, doi. 10.1007/s00170-023-11554-3
- By:
- Publication type:
- Article
46
Effect of tool pin length on interfacial behaviors and mechanical properties of friction stir-welded lap joints of 430/304 stainless steels.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 593, doi. 10.1007/s00170-023-11135-4
- By:
- Publication type:
- Article
47
Effects of curvature direction on friction stir welding lap joint of aluminum alloy "S" curved surface.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 9/10, p. 4693, doi. 10.1007/s00170-023-11043-7
- By:
- Publication type:
- Article
48
Effect of different rivet structures on the interface and properties of Al and Mg welded-riveted hybrid joining.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 5/6, p. 2277, doi. 10.1007/s00170-022-10735-w
- By:
- Publication type:
- Article
49
Effects of double pulse welding on microstructure, texture, and fatigue behavior of DP590 steel resistance spot weld.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 3/4, p. 1271, doi. 10.1007/s00170-022-10704-3
- By:
- Publication type:
- Article
50
Effects of adherends' misalignment on the strength of single-lap joints under 3-point and 4-point bending tests.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 123, n. 11/12, p. 3819, doi. 10.1007/s00170-022-10434-6
- By:
- Publication type:
- Article