Works matching DE "CRACKING of welded joints"
Results: 178
Stress cracking behaviour of dissimilar friction stir weldment in chloride solution: dissolution assisted or hydrogen induced?
- Published in:
- Corrosion Engineering, Science & Technology, 2006, v. 41, n. 1, p. 45, doi. 10.1179/174327806X93965
- By:
- Publication type:
- Article
Influence of short glass fibres and weldlines on the mechanical properties of injection-moulded acrylonitrile–styrene–acrylate copolymer.
- Published in:
- Journal of Materials Science, 1998, v. 33, n. 12, p. 2985, doi. 10.1023/A:1004362915713
- By:
- Publication type:
- Article
Macro-crack initiation life for orthotropic steel decks considering weld heterogeneity and random traffic loading.
- Published in:
- Structure & Infrastructure Engineering: Maintenance, Management, Life-Cycle Design & Performance, 2017, v. 13, n. 12, p. 1639, doi. 10.1080/15732479.2017.1315733
- By:
- Publication type:
- Article
HOT CRACKING T-JOINT WELDABILITY TEST OF PRECIPITATION HARDENABLE AL ALLOYS.
- Published in:
- Annals of DAAAM & Proceedings, 2011, p. 633
- By:
- Publication type:
- Article
Crack Detection in Single-Crystalline Silicon Wafer Using Laser Generated Lamb Wave.
- Published in:
- Advances in Materials Science & Engineering, 2013, p. 1, doi. 10.1155/2013/950791
- By:
- Publication type:
- Article
SIMULATION OF FATIGUE CRACK GROWTH IN RICTION STIR WELDED JOINTS IN 2024-T351 AL ALLOY.
- Published in:
- Suranaree Journal of Science & Technology, 2009, v. 16, n. 1, p. 35
- By:
- Publication type:
- Article
Experimental Study of FSW T-joints of EN-AW 6082-T6 and Their Behaviour Under Static Loads.
- Published in:
- Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2014, v. 39, n. 12, p. 9083, doi. 10.1007/s13369-014-1465-0
- By:
- Publication type:
- Article
Comment.
- Published in:
- Insight: Non-Destructive Testing & Condition Monitoring, 2014, v. 56, n. 5, p. 234
- By:
- Publication type:
- Article
Comment.
- Published in:
- Insight: Non-Destructive Testing & Condition Monitoring, 2011, v. 53, n. 10, p. 526
- Publication type:
- Article
Optimisation of ultrasonic inspection to detect small transverse re-heat cracks on hydroprocessing reactors.
- Published in:
- Insight: Non-Destructive Testing & Condition Monitoring, 2010, v. 52, n. 1, p. 23, doi. 10.1784/insi.2010.52.1.23
- By:
- Publication type:
- Article
Review Type IV cracking in ferritic power plant steels.
- Published in:
- Materials Science & Technology, 2006, v. 22, n. 12, p. 1387, doi. 10.1179/174328406X148778
- By:
- Publication type:
- Article
Microstructural evolution and solidification cracking susceptibility of Fe-18Mn-0.6C- xAl steel welds.
- Published in:
- Journal of Materials Science, 2015, v. 50, n. 1, p. 279, doi. 10.1007/s10853-014-8586-4
- By:
- Publication type:
- Article
An Investigation of the Growth of Multi-site Fatigue Cracks.
- Published in:
- International Journal of Fracture, 2007, v. 145, n. 4, p. 329, doi. 10.1007/s10704-007-9126-x
- By:
- Publication type:
- Article
Crack tip fields at a ductile single crystal-rigid material interface.
- Published in:
- International Journal of Fracture, 2003, v. 122, n. 3/4, p. 131, doi. 10.1023/B:FRAC.0000005775.10890.43
- By:
- Publication type:
- Article
Mechanisms of fatigue-crack propagation in ductile and brittle solids.
- Published in:
- International Journal of Fracture, 1999, v. 100, n. 1, p. 55, doi. 10.1023/A:1018655917051
- By:
- Publication type:
- Article
A Finite Element Calculation of Stress Intensity Factors of Cruciform and Butt Welded Joints for Some Geometrical Parameters.
- Published in:
- Jordan Journal of Mechanical & Industrial Engineering, 2010, v. 4, n. 5, p. 236
- By:
- Publication type:
- Article
Optimizing the Vacuum Heat-Treatment of Hot-Work Tool Steels by Linear Elastic Fracture Mechanics.
- Published in:
- Materials & Manufacturing Processes, 2006, v. 21, n. 8, p. 819, doi. 10.1080/10426910600727981
- By:
- Publication type:
- Article
Effects of weaving laser on scanning laser-MAG hybrid welding characteristics of high-strength steel.
- Published in:
- Science & Technology of Welding & Joining, 2017, v. 22, n. 2, p. 104, doi. 10.1080/13621718.2016.1199126
- By:
- Publication type:
- Article
Electron beam weldability of a group IAB iron meteorite.
- Published in:
- Science & Technology of Welding & Joining, 2014, v. 19, n. 4, p. 295, doi. 10.1179/1362171813Y.0000000188
- By:
- Publication type:
- Article
Effect of severe plastic deformation on hot cracking of wrought aluminium alloy in pulsed laser welding.
- Published in:
- Science & Technology of Welding & Joining, 2013, v. 18, n. 6, p. 473, doi. 10.1179/1362171813Y.0000000125
- By:
- Publication type:
- Article
Liquid film formation and cracking during friction stir welding.
- Published in:
- Science & Technology of Welding & Joining, 2011, v. 16, n. 4, p. 295, doi. 10.1179/1362171811Y.0000000005
- By:
- Publication type:
- Article
Advances in friction welding process: a review.
- Published in:
- Science & Technology of Welding & Joining, 2010, v. 15, n. 7, p. 534, doi. 10.1179/136217110X12785889550064
- By:
- Publication type:
- Article
Keyhole stability in disc laser welding of AZ31B and AZ61A magnesium alloys and weld metal properties.
- Published in:
- Science & Technology of Welding & Joining, 2010, v. 15, n. 7, p. 559, doi. 10.1179/136217110X12720264008592
- By:
- Publication type:
- Article
Effect of post-weld heat treatment on joint properties of friction welded joint between brass and low carbon steel.
- Published in:
- Science & Technology of Welding & Joining, 2010, v. 15, n. 7, p. 590, doi. 10.1179/136217110X12813393169615
- By:
- Publication type:
- Article
Control of weld composition when arc welding high strength aluminium alloys using multiple filler wires.
- Published in:
- Science & Technology of Welding & Joining, 2010, v. 15, n. 6, p. 491, doi. 10.1179/136217110X12785889549660
- By:
- Publication type:
- Article
Fatigue crack growth under a constant amplitude loading of Al-6061-T6 welds obtained by modified indirect electric arc technique.
- Published in:
- Science & Technology of Welding & Joining, 2010, v. 15, n. 6, p. 514, doi. 10.1179/136217110X12785889549589
- By:
- Publication type:
- Article
EARLY DETECTION OF AGEING IN SOLDER JOINTS THROUGH LASER PROBE THERMAL ANALYSIS OF THE PELTIER EFFECT.
- Published in:
- Quality & Reliability Engineering International, 1994, v. 10, n. 4, p. 289, doi. 10.1002/qre.4680100407
- By:
- Publication type:
- Article
Size Estimation of Fatigue Crack Appearing at Bolt Joints of Aluminum Alloy Plates by Synchronized SAW Measurement.
- Published in:
- Experimental Mechanics, 2011, v. 51, n. 6, p. 869, doi. 10.1007/s11340-010-9383-x
- By:
- Publication type:
- Article
Evaluation of Residual Stresses Induced by Robotized Hammer Peening by the Contour Method.
- Published in:
- Experimental Mechanics, 2009, v. 49, n. 6, p. 775, doi. 10.1007/s11340-008-9205-6
- By:
- Publication type:
- Article
CRACK GROWTH OF STRUCTURAL ADHESIVE JOINTS IN HUMID ENVIRONMENTS.
- Published in:
- Journal of Adhesion, 2004, v. 80, n. 3, p. 169, doi. 10.1080/00218460490279233
- By:
- Publication type:
- Article
Cracking threshold of the welded joints subjected to high-cyclic loading.
- Published in:
- Mechanika, 2009, v. 76, n. 2, p. 5
- By:
- Publication type:
- Article
Crack Development in a Low-Stress PBGA Package due to Continuous Recrystallization Leading to Formation of Orientations with [001] Parallel to the Interface.
- Published in:
- Journal of Electronic Materials, 2010, v. 39, n. 12, p. 2669, doi. 10.1007/s11664-010-1380-4
- By:
- Publication type:
- Article
Effect of Ag Content on Solidification Cracking Susceptibility of Sn-Ag-Cu Solder Joints.
- Published in:
- Journal of Electronic Materials, 2010, v. 39, n. 8, p. 1298, doi. 10.1007/s11664-010-1175-7
- By:
- Publication type:
- Article
XFEM simulation of fatigue crack growth in a welded joint of a pressure vessel with a reinforcement ring.
- Published in:
- Archive of Applied Mechanics, 2019, v. 89, n. 5, p. 919, doi. 10.1007/s00419-018-1435-1
- By:
- Publication type:
- Article
Bearing capacity of straight-seam large-diameter pipes with a surface defect.
- Published in:
- Chemical & Petroleum Engineering, 2005, v. 41, n. 1/2, p. 48, doi. 10.1007/s10556-005-0059-9
- By:
- Publication type:
- Article
Fatigue Crack Growth and Control of 14MnNbq Welding Plates Used for Bridges.
- Published in:
- Journal of Engineering Mechanics, 2012, v. 138, n. 1, p. 30, doi. 10.1061/(ASCE)EM.1943-7889.0000295
- By:
- Publication type:
- Article
Fracture Analysis of Shear Deformable Bi-Material Interface.
- Published in:
- Journal of Engineering Mechanics, 2006, v. 132, n. 3, p. 306, doi. 10.1061/(ASCE)0733-9399(2006)132:3(306)
- By:
- Publication type:
- Article
2D weight function for quarter‐elliptical cracks in lug attachments.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2018, v. 41, n. 12, p. 2557, doi. 10.1111/ffe.12855
- By:
- Publication type:
- Article
A conservative approach for mode I‐II fatigue analysis under residual stresses: The RSIF proportionality conjecture.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2018, v. 41, n. 11, p. 2350, doi. 10.1111/ffe.12843
- By:
- Publication type:
- Article
Fatigue crack initiation assessment of welded joints accounting for residual stress.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2018, v. 41, n. 8, p. 1823, doi. 10.1111/ffe.12824
- By:
- Publication type:
- Article
Creep crack growth properties of P91 and P22 welded joints.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2017, v. 40, n. 8, p. 1267, doi. 10.1111/ffe.12628
- By:
- Publication type:
- Article
A modified loading method for separating the effect of residual stress on fatigue crack growth rate of welded joints.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2017, v. 40, n. 8, p. 1227, doi. 10.1111/ffe.12617
- By:
- Publication type:
- Article
Fatigue strength assessment of laser stake-welded T-joints subjected to reversed bending.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2016, v. 39, n. 10, p. 1272, doi. 10.1111/ffe.12442
- By:
- Publication type:
- Article
The multiaxial weld root fatigue of butt welded joints subjected to uniaxial loading.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2016, v. 39, n. 10, p. 1281, doi. 10.1111/ffe.12444
- By:
- Publication type:
- Article
On the fatigue behaviour of quenched and tempered at 300 and 600 °C SAE 1045 steel in an environment of sugar cane juice.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2016, v. 39, n. 10, p. 1299, doi. 10.1111/ffe.12454
- By:
- Publication type:
- Article
A structural stress-based critical plane method for multiaxial fatigue life estimation in welded joints.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2016, v. 39, n. 3, p. 372, doi. 10.1111/ffe.12369
- By:
- Publication type:
- Article
Plastic collapse load prediction and failure assessment diagram analysis of cracked circular hollow section T-joint and Y-joint.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2014, v. 37, n. 3, p. 314, doi. 10.1111/ffe.12115
- By:
- Publication type:
- Article
Consideration of the residual stress distributions in fatigue crack growth calculations for assessing welded steel joints.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2013, v. 36, n. 12, p. 1352, doi. 10.1111/ffe.12060
- By:
- Publication type:
- Article
FATIGUE CRACK PROPAGATION BEHAVIOR ACCORDING TOFIBER ARRAYING DIRECTION FOR LOAD DIRECTION INWOVEN CFRP COMPOSITE.
- Published in:
- International Journal of Modern Physics B: Condensed Matter Physics; Statistical Physics; Applied Physics, 2010, v. 24, n. 15/16, p. 2615, doi. 10.1142/S0217979210065350
- By:
- Publication type:
- Article
A CRACK GROWTH MODEL BASED ON FATIGUE DAMAGE ACCUMULATION.
- Published in:
- International Journal of Modern Physics B: Condensed Matter Physics; Statistical Physics; Applied Physics, 2010, v. 24, n. 15/16, p. 2774, doi. 10.1142/S0217979210065611
- By:
- Publication type:
- Article