Works matching DE "CARBIDE cutting tools"
Results: 621
Process definition of preformed part machining for taking benefit of parallel kinematic machine tool kinematic performances.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2012, v. 58, n. 9-12, p. 869, doi. 10.1007/s00170-011-3453-9
- By:
- Publication type:
- Article
Influence of the tool corner radius on the tool wear and process forces during hard turning.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2012, v. 58, n. 9-12, p. 933, doi. 10.1007/s00170-011-3451-y
- By:
- Publication type:
- Article
Mechanisms in oxide-carbide ceramic BOK 60 grinding.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2012, v. 58, n. 9-12, p. 985, doi. 10.1007/s00170-011-3449-5
- By:
- Publication type:
- Article
Progressive tool failure in high-speed dry milling of Ti-6Al-4V alloy with coated carbide tools.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2012, v. 58, n. 5-8, p. 465, doi. 10.1007/s00170-011-3408-1
- By:
- Publication type:
- Article
Implications of the reduction of cutting fluid in drilling AISI P20 steel with carbide tools.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2012, v. 58, n. 5-8, p. 431, doi. 10.1007/s00170-011-3401-8
- By:
- Publication type:
- Article
Numerical simulation of orthogonal machining process using multilayer and single-layer coated tools.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2011, v. 54, n. 9-12, p. 899, doi. 10.1007/s00170-010-3012-9
- By:
- Publication type:
- Article
Study on finish-turning of NiCr20TiAl nickel-based alloy using AlO/TiN-coated carbide tools.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2011, v. 53, n. 1-4, p. 81, doi. 10.1007/s00170-010-2823-z
- By:
- Publication type:
- Article
Cutting performance of cemented-carbides-based self-lubricated tool embedded with different solid lubricants.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2011, v. 52, n. 5-8, p. 477, doi. 10.1007/s00170-010-2740-1
- By:
- Publication type:
- Article
On finishing of pressing die surfaces using machine hammer peening.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2011, v. 52, n. 1-4, p. 115, doi. 10.1007/s00170-010-2725-0
- By:
- Publication type:
- Article
Surface roughness prediction in turning of femoral head.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2010, v. 51, n. 1-4, p. 79, doi. 10.1007/s00170-010-2616-4
- By:
- Publication type:
- Article
Empirical models and optimal cutting parameters for cutting forces and surface roughness in hard milling of AISI H13 steel.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2010, v. 51, n. 1-4, p. 45, doi. 10.1007/s00170-010-2598-2
- By:
- Publication type:
- Article
The effect of grain size and hardness of Waspaloy on the wear of cemented carbide tools.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2010, v. 50, n. 9-12, p. 907, doi. 10.1007/s00170-010-2590-x
- By:
- Publication type:
- Article
Drilling of hybrid Al-5%SiC<sub>p</sub>-5%B<sub>4</sub>C<sub>p</sub> metal matrix composites.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2010, v. 49, n. 9-12, p. 871, doi. 10.1007/s00170-009-2453-5
- By:
- Publication type:
- Article
Experimental investigations of damage analysis in drilling of woven glass fiber-reinforced plastic composites.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2010, v. 49, n. 9-12, p. 861, doi. 10.1007/s00170-009-2440-x
- By:
- Publication type:
- Article
Cryoprocessing of cutting tool materials—a review.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2010, v. 48, n. 1-4, p. 175, doi. 10.1007/s00170-009-2263-9
- By:
- Publication type:
- Article
Investigation on diffusion wear during high-speed machining Ti-6Al-4V alloy with straight tungsten carbide tools.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2009, v. 44, n. 1/2, p. 17, doi. 10.1007/s00170-008-1803-z
- By:
- Publication type:
- Article
Some study on electrical discharge machining of ({WC+TiC+TaC/NbC}–Co) cemented carbide.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2009, v. 43, n. 11/12, p. 1177, doi. 10.1007/s00170-008-1796-7
- By:
- Publication type:
- Article
Optimisation of machining parameters of glass-fibre-reinforced plastic (GFRP) pipes by desirability function analysis using Taguchi technique.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2009, v. 43, n. 5/6, p. 581, doi. 10.1007/s00170-008-1731-y
- By:
- Publication type:
- Article
Performance analysis of cryogenically treated coated carbide inserts.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2009, v. 42, n. 3/4, p. 222, doi. 10.1007/s00170-008-1597-z
- By:
- Publication type:
- Article
Machinability aspects concerning micro-turning of PA66-GF30-reinforced polyamide.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2009, v. 41, n. 9/10, p. 839, doi. 10.1007/s00170-008-1537-y
- By:
- Publication type:
- Article
Quality improvement by using grey prediction tool compensation model for uncoated and TiAlCN-coated tungsten carbide tools in depanel process of memory modules.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2009, v. 40, n. 9/10, p. 857, doi. 10.1007/s00170-008-1410-z
- By:
- Publication type:
- Article
FEM analysis in high speed machining of aluminium alloy (Al7075-0) using polycrystalline diamond (PCD) and cemented carbide (K10) cutting tools.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2009, v. 39, n. 11/12, p. 1093, doi. 10.1007/s00170-007-1299-y
- By:
- Publication type:
- Article
Characterization of multilayer pvd nanocoatings deposited on tungsten carbide cutting tools.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2008, v. 38, n. 5/6, p. 622, doi. 10.1007/s00170-007-1059-z
- By:
- Publication type:
- Article
Prediction of tool wear using regression and ANN models in end-milling operation.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2008, v. 37, n. 1/2, p. 29, doi. 10.1007/s00170-007-0948-5
- By:
- Publication type:
- Article
White layer formation and hardening effects in hard turning of H13 tool steel with CrTiAlN and CrTiAlN/MoST-coated carbide tools.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2008, v. 36, n. 7/8, p. 650, doi. 10.1007/s00170-006-0899-2
- By:
- Publication type:
- Article
Joint identification of modular tools using a novel receptance coupling method.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2008, v. 35, n. 11/12, p. 1251, doi. 10.1007/s00170-006-0826-6
- By:
- Publication type:
- Article
The effects of microalloyed steel pre-heat treatment on microstructure and machinability.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2008, v. 35, n. 9/10, p. 1041, doi. 10.1007/s00170-007-1050-8
- By:
- Publication type:
- Article
A comparative evaluation of the turning of reinforced and unreinforced polyamide.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2007, v. 33, n. 9/10, p. 911, doi. 10.1007/s00170-006-0520-8
- By:
- Publication type:
- Article
Performance of cryogenically treated tungsten carbide tools in milling operations.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2007, v. 32, n. 7/8, p. 638, doi. 10.1007/s00170-005-0379-0
- By:
- Publication type:
- Article
Development of micropin fabrication process using tool based micromachining.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2006, v. 27, n. 9/10, p. 939, doi. 10.1007/s00170-004-2270-9
- By:
- Publication type:
- Article
Influence of machining parameters on the machinability of particulate reinforced Al/SiC-MMC.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2005, v. 25, n. 9/10, p. 850, doi. 10.1007/s00170-003-1917-2
- By:
- Publication type:
- Article
A neural-network-based methodology for the prediction of surface roughness in a turning process.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2005, v. 25, n. 1/2, p. 118, doi. 10.1007/s00170-003-1810-z
- By:
- Publication type:
- Article
A study of the cutting modes in the grooving of tungsten carbide.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2004, v. 24, n. 5/6, p. 321, doi. 10.1007/s00170-003-1565-6
- By:
- Publication type:
- Article
Technological support for the durability of metal-cutting tools by the formation of wear-resistant coatings using energy-efficient methods.
- Published in:
- Continuum Mechanics & Thermodynamics, 2024, v. 36, n. 6, p. 1515, doi. 10.1007/s00161-024-01312-5
- By:
- Publication type:
- Article
Experimental and Statistical Investigation of the Effect of Nanoparticle Minimum Quantity Lubrication (nano-MQL) Method on Cutting Performance.
- Published in:
- Gazi Journal of Engineering Sciences (GJES) / Gazi Mühendislik Bilimleri Dergisi, 2024, v. 10, n. 1, p. 102, doi. 10.30855/gmbd.0705N08
- By:
- Publication type:
- Article
Grey Relational Analysis Optimization of Input Parameters for Electrochemical Discharge Drilling of Silicon Carbide by Gunmetal Tool Electrode.
- Published in:
- Annales de Chimie Science des Matériaux, 2020, v. 44, n. 4, p. 239, doi. 10.18280/acsm.440402
- By:
- Publication type:
- Article
Effect of compacting pressure on microstructure and mechanical properties of carbide cutting tools.
- Published in:
- Powder Metallurgy, 2011, v. 54, n. 5, p. 585, doi. 10.1179/1743290110Y.0000000001
- By:
- Publication type:
- Article
Synthesis of ultrafine TiC<sub>1–X</sub> and Ti(CN) powders via planetary milling.
- Published in:
- Powder Metallurgy, 2004, v. 47, n. 1, p. 93, doi. 10.1179/003258904225015455
- By:
- Publication type:
- Article
Energy-based analysis of ultrasonically assisted turning.
- Published in:
- Shock & Vibration, 2011, v. 18, n. 1/2, p. 333, doi. 10.1155/2011/598106
- By:
- Publication type:
- Article
Investigation on Surface Roughness and Power Consumption for Sustainability Assessment in Hard Turning of HSLA Steel With SPPP‐AlTiSiN–Coated Carbide Tool Under Various Cooling‐Lubrications.
- Published in:
- Lubrication Science, 2024, v. 36, n. 8, p. 571, doi. 10.1002/ls.1717
- By:
- Publication type:
- Article
Effect of machining parameters on surface roughness in end milling of AISI 304 steel using uncoated solid carbide tools.
- Published in:
- Australian Journal of Mechanical Engineering, 2014, v. 12, n. 2, p. 223, doi. 10.7158/M12-079.2014.12.2
- By:
- Publication type:
- Article
Machining Parameters Optimization of AISI 4340.
- Published in:
- IUP Journal of Mechanical Engineering, 2019, v. 12, n. 2, p. 43
- By:
- Publication type:
- Article
Machining stainless steel.
- Published in:
- Advanced Materials & Processes, 1997, v. 152, n. 6, p. 23
- By:
- Publication type:
- Article
Erosion Behaviors and Mechanisms of Low-Carbon Steel and Alloy Tool Steel in Commonly Used Molten Aluminum Alloys.
- Published in:
- International Journal of Metalcasting, 2024, v. 18, n. 4, p. 2872, doi. 10.1007/s40962-023-01236-x
- By:
- Publication type:
- Article
THE INFLUENCE OF DRAG FINISHING ON CARBIDE END MILLS MANUFACTURED IN DIFFERENT DIAMETERS.
- Published in:
- Annals of DAAAM & Proceedings, 2023, v. 34, p. 455, doi. 10.2507/34th.daaam.proceedings.059
- By:
- Publication type:
- Article
ON THE EFFECTIVE SUBSTITUTION OF TURNING BY PERIPHERAL MILLING.
- Published in:
- Annals of DAAAM & Proceedings, 2021, v. 32, p. 16, doi. 10.2507/32nd.daaam.proceedings.003
- By:
- Publication type:
- Article
TECHNOLOGICAL ASSURANCE OF SURFACE ROUGHNESS IN POCKET MILLING.
- Published in:
- Annals of DAAAM & Proceedings, 2020, v. 31, p. 584, doi. 10.2507/31st.daaam.proceedings.080
- By:
- Publication type:
- Article
THE TOOL WEAR OBSERVATION OF MILLING TOOLS IN HIGH FEED MACHINING OF HARDENED STEELS.
- Published in:
- Annals of DAAAM & Proceedings, 2019, v. 30, p. 0753, doi. 10.2507/30th.daaam.proceedings.103
- By:
- Publication type:
- Article
MACHINING OF INCONEL 718 USING UNCOATED CUTTING TOOLS WITH DIFFERENT CUTTING EDGE QUALITY.
- Published in:
- Annals of DAAAM & Proceedings, 2016, v. 27, p. 441, doi. 10.2507/27th.daaam.proceedings.065
- By:
- Publication type:
- Article
EFFECT OF CUTTING EDGE GEOMETRY ON CUTTING TOOL LIFE WHEN DRILLING INCONEL 718.
- Published in:
- Annals of DAAAM & Proceedings, 2015, v. 26, n. 1, p. 0709, doi. 10.2507/26th.daaam.proceedings.098
- By:
- Publication type:
- Article