Works matching DE "STATIC friction"

Results: 619

A Parametric Study on the Evolution of Cyclic Clay-Pile Interface Friction for Large Numbers of Cycles.

Published in:

Geotechnical & Geological Engineering, 2020, v. 38, n. 5, p. 5457, doi. 10.1007/s10706-020-01377-4

By:

Muhammed, Rawaz Dlawar;
Canou, Jean;
Dupla, Jean-Claude;
Tabbagh, Alain

Publication type:

Article

Influence of Relative Density on Static Soil-Structure Frictional Resistance of Dry and Saturated Sand.

Published in:

Geotechnical & Geological Engineering, 2014, v. 32, n. 2, p. 411, doi. 10.1007/s10706-013-9723-6

By:

Tiwari, Binod;
Al-Adhadh, Ahmed

Publication type:

Article

Effects of solid particle surface roughness on particle velocity fluctuation in multi-zone waste heat recovery heat exchanger.

Published in:

Chemical Engineering Research & Design: Transactions of the Institution of Chemical Engineers Part A, 2023, v. 194, p. 1, doi. 10.1016/j.cherd.2023.04.027

By:

Wang, Mingchao;
Zhang, Zhongliang;
Qi, Chenglu;
Sun, Peng;
Wang, Youtang;
Zheng, Bin

Publication type:

Article

On the local corrosion in a thin layer of electrolyte separating two materials: specific aspects and their contribution to pad-to-disk stiction in automobile brake system.

Published in:

Journal of Solid State Electrochemistry, 2021, v. 25, n. 3, p. 895, doi. 10.1007/s10008-020-04867-w

By:

Tigane, Rafik;
Bauwens, Denis;
Hude, Olivier;
Joiret, Suzanne;
Keddam, Michel;
Turmine, Mireille;
Vivier, Vincent

Publication type:

Article

Dynamics of frictional systems with memory.

Published in:

Continuum Mechanics & Thermodynamics, 2022, v. 34, n. 4, p. 921, doi. 10.1007/s00161-019-00803-0

By:

Metrikin, V. S.;
Igumnov, L. A.;
Metrikine, A. V.

Publication type:

Article

INFLUENCE OF PARTICLE SHAPE AND CONTACT PARAMETERS ON DEM-SIMULATED BULK DENSITY OF WHEAT.

Published in:

Biochemical Journal, 2020, v. 477, n. 19, p. 1657, doi. 10.13031/trans.13718

By:

Petingco, M. C.;
Casada, M. E.;
Maghirang, R. G.;
Fasina, O. O.;
Chen, Z.;
Ambrose, R. P. K.

Publication type:

Article

Design and Analysis of Transformable Wheel with Pivoting-Head Mechanism.

Published in:

Applied Mechanics, 2023, v. 4, n. 1, p. 70, doi. 10.3390/applmech4010005

By:

Chen, Yaowei;
Kamioka, Ayumu;
Iwase, Masami;
Inoue, Jun;
Satoh, Yasuyuki

Publication type:

Article

Stiction and Friction of Nano- and Microtextured Liquid Silicon Rubber Surface Formed by Injection Molding.

Published in:

Applied Mechanics, 2022, v. 3, n. 4, p. 1270, doi. 10.3390/applmech3040073

By:

Koplin, Christof;
Weißer, Dennis F.;
Fromm, Alexander;
Deckert, Matthias H.

Publication type:

Article

基于纤维与有机材料对水利边坡加固效果研究与分析.

Published in:

Water Conservancy Science & Techonlogy & Economy, 2025, v. 31, n. 1, p. 1, doi. 10.3969/j.issn.1006-7175.2025.01.001

By:

金星;
强超;
郑君玉;
高志发

Publication type:

Article

光栅的防护结构设计与性能测试.

Published in:

Construction Machinery & Equipment, 2023, v. 54, n. 3, p. 59

By:

陈志刚;
陈玉洁;
张卫卫;
刘志辉;
文学

Publication type:

Article

抱压式锚杆静压桩机试验研究.

Published in:

Construction Machinery & Equipment, 2022, v. 53, n. 11, p. 41

By:

吕文龙;
沈仁良

Publication type:

Article

Static Analysis of Pile Clamping Mechanism of Holding Pressure Anchor Static Pile Driver.

Published in:: Construction Machinery & Equipment, 2022, v. 53, n. 9, p. 1
Publication type:: Article

抱压式锚杆静压桩机夹桩机构的静力分析.

Published in:

Construction Machinery & Equipment, 2022, v. 53, n. 9, p. 72

By:

吕文龙;
沈仁良

Publication type:

Article

石墨/聚醚醚酮复合材料的制备及其性能研究.

Published in:

Journal of Henan University of Science & Technology, Natural Science, 2023, v. 44, n. 5, p. 8, doi. 10.15926/j.cnki.issn1672-6871.2023.05.002

By:

逄显娟;
黄素玲;
谢金梦;
赵若凡;
上官宝;
张永振

Publication type:

Article

Effect of roasting on physicochemical and functional properties of flaxseed flour.

Published in:

Cogent Engineering, 2016, v. 3, n. 1, p. N.PAG, doi. 10.1080/23311916.2016.1145566

By:

Khan, Azhar;
Saini, C.S.;
Dubey, Shashi

Publication type:

Article

Static calculation of bearing construction elements taking into account physical nonlinearity.

Published in:

Vibroengineering Procedia, 2017, v. 12, p. 124, doi. 10.21595/vp.2017.18320

By:

Zhauyt, Algazy;
Sakenova, Aizhan;
Arinova, Dinara;
Alipov, Kuanyshkali;
Sharatbekov, Tanat;
Saylanbek, Gulmira

Publication type:

Article

The dynamics of a nonautonomous oscillator with friction memory.

Published in:

Vibroengineering Procedia, 2016, v. 8, p. 356

By:

Igumnov, L. A.;
Metrikin, V. S.;
Zaytzev, M. V.

Publication type:

Article

Investigation of carbon nanotube sheet for lunar dust shielding.

Published in:

Journal of Industrial Textiles, 2024, p. 1, doi. 10.1177/15280837231224077

By:

Giri, Prakash;
Abdallah, Shaaban;
Kim, Woo Kyun;
Alverez, Noe T.;
Schulz, Mark

Publication type:

Article

P.68: Reflective Interferometric Modulator Display with Temporal Color Modulation.

Published in:

2013

By:

Ji, Zhong;
Zhu, Lei

Publication type:

Other

Particle Directional Conveyance under Longitudinal Vibration by considering the Trough Surface Texture: Numerical Simulation Based on the Discrete Element Method.

Published in:

Shock & Vibration, 2018, p. 1, doi. 10.1155/2018/8260462

By:

Chen, Huazhi;
Jiang, Shengyuan;
Liu, Rongkai;
Zhang, Weiwei

Publication type:

Article

A pedestrian dynamics model based on heuristics considering contact force information and static friction.

Published in:

Transportmetrica B: Transport Dynamics, 2019, v. 7, n. 1, p. 1117, doi. 10.1080/21680566.2019.1568926

By:

Wang, Litao;
Shen, Shifei

Publication type:

Article

Simulation and Validation of Discrete Element Parameter Calibration for Fine-Grained Iron Tailings.

Published in:

Minerals (2075-163X), 2023, v. 13, n. 1, p. 58, doi. 10.3390/min13010058

By:

Zhang, Jinxia;
Chang, Zhenjia;
Niu, Fusheng;
Chen, Yuying;
Wu, Jiahui;
Zhang, Hongmei

Publication type:

Article

A Semi-Automated DEM Parameter Calibration Technique of Powders Based on Different Bulk Responses Extracted from Auger Dosing Experiments.

Published in:

KONA: Powder & Particle Journal, 2021, n. 38, p. 235, doi. 10.14356/kona.2021010

By:

El Kassem, Bilal;
Salloum, Nizar;
Brinz, Thomas;
Heider, Yousef;
Markert, Bernd

Publication type:

Article

EXPERIMENTAL PREDICTION OF CREEP AREA AND STATIC FRICTION BETWEEN BRASS MATERIAL AND COW SKIN.

Published in:

Agricultural Engineering, Research Papers, 2017, v. 49, p. 1

By:

Subhi, K.;
Tudor, A.;
Hussein, E.;
Wahad, H.;
Chisiu, G.;
Radulescu, A. V.

Publication type:

Article

ASSESSMENT OF PHYSICAL, FRICTIONAL AND AERODYNAMIC PROPERTIES OF CHAROLI (Buchanania Lanzan Spreng) NUT AS POTENTIALS FOR DEVELOPMENT OF PROCESSING MACHINES.

Published in:

Carpathian Journal of Food Science & Technology, 2021, v. 13, n. 2, p. 174, doi. 10.34302/crpjfst/2021.13.2.16

By:

Shelare, Sagar;
Kumar, Ravinder;
Khope, Pravin

Publication type:

Article

Verbinder aus Kunstharzpressholz mit veränderter Oberfläche zur Erhöhung der Reibung in der Scherfuge.

Published in:

Bautechnik, 2020, v. 97, p. 44, doi. 10.1002/bate.201900101

By:

Aurand, Simon;
Blaß, Hans Joachim

Publication type:

Article

GENERAL ASPECTS OF THE EXTREME METEOROLOGICAL PHENOMENON: HAIL.

Published in:

Acta Technica Corviniensis - Bulletin of Engineering, 2019, v. 12, n. 2, p. 81

By:

BIRSAN, Mariana;
MUSCALU, Adriana;
VOICEA, Iulian;
PRUTEANU, Augustina

Publication type:

Article

Efecto de las condiciones de superficie en obra sobre el coeficiente de fricción estático de materiales metálicos.

Published in:

Revista Ingeniería de Construcción, 2023, v. 38, n. 2, p. 275, doi. 10.7764/RIC.00069.21

By:

Chanchí Golondrino, J. C.;
Moreno Castañeda, B.;
Restrepo Botero, M.

Publication type:

Article

Comparison of friction produced at backet-wire interface in monocrystalline ceramic brackets of 8 different brands: An In Vitro study.

Published in:

Journal of Pharmacy & Bioallied Sciences, 2024, v. 16, p. 356, doi. 10.4103/jpbs.jpbs_572_23

By:

Mahajan, Sushil;
Mapare, Sagar;
Mundada, Ram;
Karra, Arjun;
Yannawar, Vijay;
Wadekar, Kanchan

Publication type:

Article

Evaluation of frictional forces generated between three different ligation methods with four different sizes of orthodontic archwires: An In vitro study.

Published in:

Journal of Pharmacy & Bioallied Sciences, 2021, v. 13, p. 1434, doi. 10.4103/jpbs.jpbs_244_21

By:

Rathinasamy, Ranganathan;
Vannala, Venkataramana;
Mahabob, Nazargi;
Bhuvaneshwari, S;
Sam, George;
Ganapathy, Aarthi

Publication type:

Article

Evaluation of Frictional Forces Generated between Three Different Ligation Methods with Four Different Sizes of Orthodontic Archwires: An In vitro Study.

Published in:

Journal of Pharmacy & Bioallied Sciences, 2021, v. 13, p. 1434, doi. 10.4103/jpbs.jpbs_244_21

By:

Rathinasamy, Ranganathan;
Vannala, Venkataramana;
Mahabob, Nazargi;
Bhuvaneshwari, S.;
Sam, George;
Ganapathy, Aarthi

Publication type:

Article

Determination of the friction coefficients of chestnut (Castanea sativa Mill.) sawn timber.

Published in:

International Agrophysics, 2020, v. 34, n. 1, p. 65, doi. 10.31545/intagr/112270

By:

Ramón Villar-García, José;
Vidal-López, Pablo;
Corbacho, Antonio J.;
Moya, Manuel

Publication type:

Article

Some physical properties of ginkgo nuts and kernels.

Published in:

International Agrophysics, 2013, v. 27, n. 4, p. 485, doi. 10.2478/intag-2013-0019

By:

Ch'ng, P.E.;
Abdullah, M.H.R.O.;
Mathai, E.J.;
Yunus, N.A.

Publication type:

Article

Physical properties of coriander seeds at different moisture content.

Published in:

International Agrophysics, 2012, v. 26, n. 4, p. 419, doi. 10.2478/v10247-012-0059-x

By:

Balasubramanian, S.;
Singh, K. K.;
Kumar, R.

Publication type:

Article

Morphological and Mechanical Characteristics of Onion Seedlings Insight to Mechanized Transplantation.

Published in:

Indian Journal of Agricultural Research, 2024, v. 58, n. 6, p. 1235, doi. 10.18805/IJARe.A-5844

By:

Pagare, V.;
Din, M.;
Mehta, C. R.;
Nandede, B. M.;
Kumar, M.

Publication type:

Article

A novel approach for the evaluation of ice release performance of coatings using static friction measurements.

Published in:

Journal of Coatings Technology & Research, 2021, v. 18, n. 3, p. 665, doi. 10.1007/s11998-020-00431-3

By:

Martinsen, M.;
Hed, K. O.;
Diget, J. S.;
Lein, H. L.

Publication type:

Article

Wet clay adhesion to antistick coatings: effects of binder type and surface roughness.

Published in:

Journal of Coatings Technology & Research, 2020, v. 17, n. 1, p. 69, doi. 10.1007/s11998-019-00240-3

By:

Fasano, Andrea;
Madaleno, Liliana;
Davidsdottir, Svava;
Jensen, Lars S.;
Palasi, Josep;
Weinell, Claus E.;
Dam-Johansen, Kim;
Kiil, Søren

Publication type:

Article

Experimental Calibration of Parameters of Discrete Element Model for Ginkgo Nut.

Published in:

BioResources, 2024, v. 19, n. 4, p. 8154, doi. 10.15376/biores.19.4.8154-8172

By:

Minji Liu;
Jiannan Wang;
ZhaoyanYou;
Yanghua Wu;
Ni Wang;
Huanxiong Xie

Publication type:

Article

Discrete Element Contact Parameters Measurement and Calibration of Sugarcane Leaves Based on RSM-PSO.

Published in:

BioResources, 2023, v. 18, n. 3, p. 4994, doi. 10.15376/biores.18.3.4994-5012

By:

Junle Lei;
Danni Ren;
Zhaochong Liu;
Shuaiwei Wang;
Dingyuan Lei;
Jiawei Luo;
Ming Lei

Publication type:

Article

Discrete Elemental Parameter Calibration of Stacking Behavior of Sugarcane Tail Leaf Sieved Material.

Published in:

BioResources, 2023, v. 18, n. 3, p. 4834, doi. 10.15376/biores.18.3.4834-4849

By:

Junle Lei;
Zhaochong Liu;
Danni Ren;
Shuaiwei Wang;
Dingyuan Lei;
Jiawei Luo;
Ming Lei

Publication type:

Article

Discrete Element Method for Simulation and Calibration of Cotton Stalk Contact Parameters.

Published in:

BioResources, 2023, v. 18, n. 1, p. 400, doi. 10.15376/biores.18.1.400-416

By:

Jiali Li;
Yongtao Lu;
Xiangbin Peng;
Peng Jiang;
Bingcheng Zhang;
Lanyu Zhang;
Hewei Meng;
Za Kan;
Xinzhong Wang

Publication type:

Article

Measurement and Calibration of Discrete Element Simulation Parameters of Crushed Sugarcane Tail Leaves.

Published in:

BioResources, 2022, v. 17, n. 4, p. 5984, doi. 10.15376/biores.17.4.5984-5998

By:

Junle Lei;
Shuaiwei Wang;
Dingyuan Lei;
Zhaochong Liu

Publication type:

Article

Mechano-sorptive Deformation of Borate Modified Strand Board for Structural Uses.

Published in:

BioResources, 2017, v. 12, n. 3, p. 5812, doi. 10.15376/biores.12.3.5812-5825

By:

Guangyao Li;
Xiuxuan Sun;
Sunyoung Lee;
Qinglin Wu

Publication type:

Article

Analysis of Static Friction Coefficient Between Workpiece and Rubber Belt in Sanding Wood-Based Pan.

Published in:

BioResources, 2014, v. 9, n. 4, p. 7372, doi. 10.15376/biores.9.4.7372-7381

By:

Bin Luo;
Li Li;
Meijun Xu;
Hongguang Liu;
Fangru Xing

Publication type:

Article

Seismic capacity and multi-mechanism analysis for dry-stack masonry arches subjected to hinge control.

Published in:

Bulletin of Earthquake Engineering, 2020, v. 18, n. 2, p. 673, doi. 10.1007/s10518-019-00583-7

By:

Stockdale, Gabriel L.;
Sarhosis, Vasilis;
Milani, Gabriele

Publication type:

Article

NON-EQUILIBRIUM THERMODYNAMICS BEYOND LINEARITY: SLIDING FRICTION.

Published in:

AAPP Physical, Mathematical & Natural Sciences / Atti della Accademia Peloritana dei Pericolanti: Classe di Scienze Fisiche, Matematiche e Naturali, 2019, v. 97, p. 1, doi. 10.1478/AAPP.97S1A26

By:

VERHÁS, JÓZSEF

Publication type:

Article

Entropic force in a dilute solution of real ring polymer chains with different topological structures in a slit of two parallel walls with mixed boundary conditions.

Published in:

Condensed Matter Physics, 2023, v. 26, n. 4, p. 1, doi. 10.5488/CMP.26.43605

By:

Kuterba, P.;
Danel, Z.;
Janke, W.

Publication type:

Article

Frictional Aging of Single‐Asperity Nanoindentation Contacts in Quartz and Calcite.

Published in:

Geophysical Research Letters, 2024, v. 51, n. 4, p. 1, doi. 10.1029/2023GL105471

By:

Badt, Nir Z.;
Goldsby, David L.;
Pharr, George M.;
Walker, Christopher C.

Publication type:

Article

Carbonate Fault Mirrors With Extremely Low Frictional Healing Rates: A Possible Source of Aseismic Creep.

Published in:

Geophysical Research Letters, 2021, v. 48, n. 11, p. 1, doi. 10.1029/2021GL093749

By:

Park, Yohan;
Takehiro Hirose;
Jin-Han Ree

Publication type:

Article

The Pulled Spool-Which Way Does It Roll?

Published in:

Science Teacher, 2020, v. 87, n. 8, p. 16, doi. 10.1080/00368555.2020.12293526

By:

HEWITT, PAUL G.

Publication type:

Article