Works matching DE "GASKETS"

Results: 345

Cost-effective method for growing three-dimensional cell cultures in extracellular matrix extract.

Published in:

Biotechnic & Histochemistry, 2009, v. 84, n. 1, p. 25, doi. 10.1080/10520290802646635

By:

Jacob, AI;
Waite, KA;
Eng, C

Publication type:

Article

An Aufwuchs Chamber Slide for High-Resolution Confocal Laser Scanning Microscopy and Stereo Imaging of Microbial Communities in Natural Biofilms.

Published in:

Microbial Ecology, 2004, v. 47, n. 3, p. 266, doi. 10.1007/s00248-003-1042-7

By:

Eaglesham, B. S.;
Lion, L. W.;
Ghiorse, W. C.

Publication type:

Article

Migration from the gaskets of lids into oily foods: first results on polyadipates.

Published in:

European Food Research & Technology, 2008, v. 226, n. 6, p. 1399, doi. 10.1007/s00217-007-0670-4

By:

Maurus Biedermann;
Katell Fiselier;
Giuseppe Marmiroli;
Giampietro Avanzini;
Ernst Rutschmann;
Susanne Pfenninger;
Koni Grob

Publication type:

Article

Dynamic Error of Piezoelectric Impact Accelerometers Attached to Elastic Gaskets.

Published in:

Measurement Techniques, 2016, v. 59, n. 5, p. 512, doi. 10.1007/s11018-016-0999-9

By:

Mel'nik, S.;
Sobolev, M.;
Loginov, P.

Publication type:

Article

阀门法兰-盲板螺栓联接密封性研究.

Published in:

Machine Tool & Hydraulics, 2023, v. 51, n. 19, p. 72, doi. 10.3969/j.issn.1001-3881.2023.19.011

By:

王志远;
李伦;
张毅;
高琦;
刘兴玉;
赵明举;
刘永刚

Publication type:

Article

大直径越江盾构隧道管片新型接缝双道密封垫防水性能研究.

Published in:

Railway Standard Design, 2022, v. 66, n. 8, p. 109, doi. 10.13238/j.issn.1004-2954.202105240001

By:

鲁志鹏;
马天宇;
谢宏明;
张忆;
王士民;
何川

Publication type:

Article

High-temperature aged performance of waterproof gasket used in shield tunnel.

Published in:

Hazard Control in Tunnelling & Underground Engineering, 2022, v. 4, n. 4, p. 52, doi. 10.19952/j.cnki.2096-5052.2022.04.07

By:

YU Wei;
LIN Zanquan;
ZHU Binbin;
WANG Yuanye;
DING Wenqi;
QIAO Yafei;
ZHANG Xiaodong;
GONG Chenjie

Publication type:

Article

Integration of machine learning to increase steam turbine condenser vacuum and efficiency through gasket resealing and higher heat extraction into the atmosphere.

Published in:: International Journal of Energy Research, 2022, v. 46, n. 3, p. 3189, doi. 10.1002/er.7375
Publication type:: Article

A novel study on the power transformer losses in relation to CO<sub>2</sub> capturing technology.

Published in:

International Journal of Energy Research, 2008, v. 32, n. 12, p. 1151, doi. 10.1002/er.1452

By:

Takami, Kourosh Mousavi;
Mahmoudi, Jafar

Publication type:

Article

Investigation of null-matrix alloy gaskets for a diamond-anvil-cell on high pressure neutron diffraction experiments.

Published in:

High Pressure Research, 2022, v. 42, n. 4, p. 303, doi. 10.1080/08957959.2022.2144289

By:

Machida, Shinichi;
Nakano, Satoshi

Publication type:

Article

Optimisation of toroidal ZTA anvils and gaskets; towards improved load and pressure performance.

Published in:

High Pressure Research, 2021, v. 41, n. 3, p. 306, doi. 10.1080/08957959.2021.1971214

By:

Funnell, N. P.;
Bull, C. L.;
Ridley, C. J.

Publication type:

Article

Hydrostaticity in high pressure experiments: some general observations and guidelines for high pressure experimenters.

Published in:

High Pressure Research, 2021, v. 41, n. 2, p. 155, doi. 10.1080/08957959.2021.1903457

By:

Takemura, K.

Publication type:

Article

Optimized design of a semimetal gasket operating in flange-bolted joints.

Published in:

Open Engineering, 2021, v. 11, n. 1, p. 56, doi. 10.1515/eng-2021-0004

By:

Jaszak, Przemysław

Publication type:

Article

O-RING ATTACHMENT SYSTEM: REVISITED.

Published in:

2017

By:

Kaur, Manpreet;
Lahori, Manesh

Publication type:

Product Review

News and product update.

Published in:: 2006
Publication type:: Product Review

Modello di tenuta della flangia bullonata, senza guarnizione, mediante l'analogia della meccanica della frattura di una fessura parzialmente aperta.

Published in:

Fracture & Structural Integrity, 2010, n. 11, p. 10, doi. 10.3221/igf-esis.11.02

By:

Beghini, M.;
Bertini, L.;
Santus, C.;
Cagnarini, C.;
Romanello, P.

Publication type:

Article

EMC/ESD PRODUCTS.

Published in:: 2010
Publication type:: Product Review

EMC/ESD PRODUCT SHOWCASE.

Published in:: 2010
Publication type:: Product Review

EMC PRODUCTS.

Published in:: 2009
Publication type:: Product Review

Seam Aperture Leakage In Aerospace Enclosures.

Published in:

EE: Evaluation Engineering, 2009, v. 48, n. 3, p. 64

By:

Brewer, Ron

Publication type:

Article

EMC PRODUCTS.

Published in:: 2008
Publication type:: Product Review

EMC PRODUCT SHOWCASE.

Published in:: 2007
Publication type:: Product Review

LITERATURE MARKETPLACE.

Published in:: 2005
Publication type:: Product Review

Selecting Conductive Form-in-Place Gaskets.

Published in:

EE: Evaluation Engineering, 2004, v. 43, n. 1, p. 40

By:

Thibeau, Rich

Publication type:

Article

Introduction to static seals.

Published in:

2017

By:

Van Rensselar, Jeanna

Publication type:

Proceeding

Nonlinear deformation-wave processes in various rank coal specimens loaded to failure under varied temperature.

Published in:

Journal of Mining Science, 2015, v. 51, n. 4, p. 641, doi. 10.1134/S1062739115040003

By:

Oparin, V.;
Kiryaeva, T.;
Usol'tseva, O.;
Tsoi, P.;
Semenov, V.

Publication type:

Article

An analytical model for the rotational behavior of concrete segmental joints with gaskets.

Published in:

Advances in Structural Engineering, 2019, v. 22, n. 13, p. 2866, doi. 10.1177/1369433219852566

By:

Yang, Fan;
Cao, Shengrong;
Li, Qingbin

Publication type:

Article

Increasing the Quantity and Quality of GeNose 19 Medical Device Gaskets Using Piercing Tools.

Published in:

International Journal on Advanced Science, Engineering & Information Technology, 2024, v. 14, n. 1, p. 99

By:

Khoryanton, Ampala;
Nugroho, Wahyu Isti;
Sugiono, Friska Ayu Fitrianti;
Al Hassan, Rafii Labib

Publication type:

Article

CONSIDERATIONS REGARDING THE APPLICATIONS OF ADDITIVE MANUFACTURING FOR THE REALIZATION OF SEALING GASKETS USED IN PRECISION MECHANICS.

Published in:

International Journal of Mechatronics & Applied Mechanics, 2023, n. 14, p. 179

By:

Dinu, Elena;
Spânu, Alina;
Stănescu, Vlad-Andrei;
Moraru, Edgar;
Besnea, Daniel;
Constantin, Victor-Florin;
Rizescu, Ciprian;
Panait, Iolanda

Publication type:

Article

Vacuum-Tight Connections for Obtaining Ultrahigh Vacuum in Vacuum Systems of Accelerators with Wide-Aperture Chambers.

Published in:

Instruments & Experimental Techniques, 2019, v. 62, n. 3, p. 436, doi. 10.1134/S0020441219030011

By:

Anashin, V. V.;
Krasnov, A. A.;
Semenov, A. M.;
Sharafeeva, S. R.

Publication type:

Article

Determination of the thickness of a gasket in a diamond anvil high-pressure cell.

Published in:

Instruments & Experimental Techniques, 2012, v. 55, n. 1, p. 116, doi. 10.1134/S0020441211060042

By:

Dzhavadov, L.;
Elkin, F.

Publication type:

Article

Measuring the Thickness of a Metal Gasket Squeezed between the Anvils of a High-Pressure Cell while Preparing It for an Experiment.

Published in:

Instruments & Experimental Techniques, 2003, v. 46, n. 5, p. 721, doi. 10.1023/A:1026022628773

By:

Timofeev, Yu. A.;
Utyuzh, A. N.

Publication type:

Article

A Device for Sealing Pump Lamps in Solid-State Lasers.

Published in:

Instruments & Experimental Techniques, 2003, v. 46, n. 4, p. 558, doi. 10.1023/A:1025106804606

By:

Artem'ev, V. V.;
Arshinov, K. I.;
Knyazev, A. E.;
Yasnov, V. V.

Publication type:

Article

A STUDY ON THE TECHNOLOGICAL PARAMETERS' INFLUENCE ON THE PROPERTIES, POLISHING AND MICROSTRUCTURE OF CORUNDUM CERAMIC DISCS FOR WATER TAPS.

Published in:

Journal of Chemical Technology & Metallurgy, 2015, v. 50, n. 4, p. 525

By:

Djambazov, Stoyan;
Yoleva, Albena;
Hristov, Vasil;
Ivanov, Nicolay

Publication type:

Article

Partially Air‐Filled Skin‐Attachable Deformable Gasket with Negative Poisson's Ratio for Highly‐Efficient Stretchable Thermoelectric Generators (Adv. Energy Mater. 40/2023).

Published in:

Advanced Energy Materials, 2023, v. 13, n. 40, p. 1, doi. 10.1002/aenm.202370163

By:

Choi, Hyekyoung;
Min, Bok‐Ki;
Joo, Sung‐Jae;
Kim, Bong‐Seo;
Lee, Kyoungho;
Kang, Hyelin;
Sim, Yeon Hyang;
Yun, Min Ju;
Lee, Dong Yoon;
Cha, Seung I.

Publication type:

Article

Partially Air‐Filled Skin‐Attachable Deformable Gasket with Negative Poisson's Ratio for Highly‐Efficient Stretchable Thermoelectric Generators.

Published in:

Advanced Energy Materials, 2023, v. 13, n. 40, p. 1, doi. 10.1002/aenm.202301252

By:

Choi, Hyekyoung;
Min, Bok‐Ki;
Joo, Sung‐Jae;
Kim, Bong‐Seo;
Lee, Kyoungho;
Kang, Hyelin;
Sim, Yeon Hyang;
Yun, Min Ju;
Lee, Dong Yoon;
Cha, Seung I.

Publication type:

Article

Sealing against EMI and the environment.

Published in:

EE: Evaluation Engineering, 2016, v. 55, n. 9, p. 22

By:

Lecklider, Tom

Publication type:

Article

Thermo‐oxidative aging of acrylonitrile‐butadiene rubber gaskets with real geometry used in plate heat exchangers.

Published in:

Journal of Applied Polymer Science, 2023, v. 140, n. 5, p. 1, doi. 10.1002/app.53419

By:

de Souza, Elias Luiz;
de Sousa Zanzi, Mateus;
de Paiva, Kleber Vieira;
Oliveira, Jorge Luiz Goes;
de Oliveira Barra, Guilherme Mariz;
Dutra, Gabriel Benedet

Publication type:

Article

Service lifetime prediction of nitrile butadiene rubber gaskets used in plate heat exchangers.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 28, p. 1, doi. 10.1002/app.52523

By:

Zanzi, Mateus Sousa;
de Souza, Elias Luiz;
Dutra, Gabriel Benedet;
Paiva, Kleber Vieira;
Oliveira, Jorge Luiz Goes;
Cunha, Tiago Vieira;
Monteiro, André Sampaio

Publication type:

Article

Mechanical, flame‐retarding, and creep‐recovery proprieties of ethylene–propylene–diene monomer enhanced with nano‐hydroxide for undersea tunnel sealing gasket.

Published in:

Journal of Applied Polymer Science, 2021, v. 138, n. 10, p. 1, doi. 10.1002/app.49946

By:

Wang, Ze‐Nian;
Shen, Shui‐Long;
Zhou, Annan;
Lyu, Hai‐Min

Publication type:

Article

On Dimension of Fractal Functions on Product of the Sierpiński Gaskets and Associated Measures.

Published in:

Results in Mathematics / Resultate der Mathematik, 2024, v. 79, n. 2, p. 1, doi. 10.1007/s00025-023-02108-w

By:

Lal, Rattan;
Selmi, Bilel;
Verma, Saurabh

Publication type:

Article

Cylinder Head Bolts Tightening Strategies Parameters Finalization by Taguchi Method for Multi Cylinder Engines.

Published in:

International Review of Mechanical Engineering, 2018, v. 12, n. 4, p. 310, doi. 10.15866/ireme.v12i4.14404

By:

Marathe, Abhijeet V.;
Venkatachalam, G.;
Marathe, Neelkanth V.

Publication type:

Article

Numerical and Experimental Investigation of Structural Gasketing Approach for Gearbox Flange.

Published in:

International Review of Mechanical Engineering, 2017, v. 11, n. 7, p. 520, doi. 10.15866/ireme.v11i7.13197

By:

Kharat, A. H.;
Gadewar, S. P.;
Gawande, S. H.

Publication type:

Article

Ultrasonic welding of polyamide sealing gaskets using infrared radiation.

Published in:

Welding International, 2016, v. 30, n. 2, p. 150, doi. 10.1080/09507116.2015.1036535

By:

Volkov, S.S.;
Shestel, L.A.;
Sokolov, V.A.

Publication type:

Article

Access Innovation.

Published in:

2021

By:

SALMONSEN, MARY

Publication type:

Product Review

Adaptive model of engine vibration signal for diagnostics of mechanical defects.

Published in:

Mechanika, 2013, v. 19, n. 3, p. 301, doi. 10.5755/j01.mech.19.3.4658

By:

Komorska, I.

Publication type:

Article

The Use of DWT Analysys and PNN Neural Networks in Diagnostics of Gasket under Engine Head Damage.

Published in:

Mechanika, 2013, p. 58

By:

Czech, P.

Publication type:

Article

Analytical chemistry.

Published in:

Chemistry & Industry, 2004, n. 7, p. 27

By:

McCreedy, Tom

Publication type:

Article

Stress distribution and performance of threaded bolts in gasketed flange joints.

Published in:

Materialwissenschaft und Werkstoffechnik, 2021, v. 52, n. 9, p. 982, doi. 10.1002/mawe.202000233

By:

Rino Nelson, N.;
Siva Prasad, N.;
Sekhar, A.S.

Publication type:

Article

Mechanical characteristic analysis of a separable stator fabricated by fine-blanking process with numerical and experimental methods.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 9/10, p. 2435, doi. 10.1007/s00170-020-06414-3

By:

Liu, Yanxiong;
Xiong, Yue;
Hua, Lin;
Yang, Lin;
Zeng, Weijun

Publication type:

Article