Works matching DE "STRAIN hardening"
Results: 2523
Mechanical and deformation behavior of layered hydrate-bearing clayey-silty sediments: different effective confining pressures and clay content analyses.
- Published in:
- Acta Geotechnica, 2025, v. 20, n. 2, p. 861, doi. 10.1007/s11440-024-02496-5
- By:
- Publication type:
- Article
Study of the effect of the process parameters on the forming limit in shear spinning processes.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3303, doi. 10.1007/s00170-025-15041-9
- By:
- Publication type:
- Article
Microstructure and Strengthening Mechanisms in a Newly Designed High Strength Low-Density Duplex Steel.
- Published in:
- Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 3, p. 815, doi. 10.1007/s11661-024-07677-1
- By:
- Publication type:
- Article
On the Changes of Residual Stress States of S550MC + 100Cr6 Cladded Steel Upon Tensile Deformation.
- Published in:
- Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 3, p. 765, doi. 10.1007/s11661-024-07663-7
- By:
- Publication type:
- Article
Analytical Model for Fiber-Reinforced Polymer-Jacketed Square Concrete Columns in Axial Compression.
- Published in:
- ACI Structural Journal, 2010, v. 107, n. 2, p. 208, doi. 10.14359/51663537
- By:
- Publication type:
- Article
Investigation of strain-hardening characteristics of cold-sprayed Al–Al<sub>2</sub>O<sub>3</sub> coatings: a combined nanoindentation and expanding cavity models approach.
- Published in:
- Surface Engineering, 2020, v. 36, n. 10, p. 1022, doi. 10.1080/02670844.2019.1620438
- By:
- Publication type:
- Article
Non‐isothermal Crystallization Kinetics, Thermal, and Rheological Behavior of Linear/Branched Polypropylene Blends.
- Published in:
- Macromolecular Symposia, 2022, v. 406, n. 1, p. 1, doi. 10.1002/masy.202200042
- By:
- Publication type:
- Article
Strain Hardening Test: Short Term Test for Estimating Service Life of High‐Density Polyethylene.
- Published in:
- Macromolecular Symposia, 2022, v. 403, n. 1, p. 1, doi. 10.1002/masy.202200056
- By:
- Publication type:
- Article
Advanced Short‐Term Approaches to Estimate the Long‐Term Mechanical Behavior of Polymers at Static Loading Conditions.
- Published in:
- Macromolecular Symposia, 2018, v. 379, n. 1, p. 1, doi. 10.1002/masy.201700007
- By:
- Publication type:
- Article
Relationship between Branched Structure and Viscoelastic Properties of Highly Branched Polyethylene Derived by Monte Carlo Molecular Simulation and the BoB‐Rheology Simulation Methods.
- Published in:
- Macromolecular Theory & Simulations, 2021, v. 30, n. 3, p. 1, doi. 10.1002/mats.202000069
- By:
- Publication type:
- Article
Using a Multiscale Modeling Approach to Correlate Reaction Conditions with Polymer Microstructure and Rheology.
- Published in:
- Macromolecular Theory & Simulations, 2021, v. 30, n. 1, p. 1, doi. 10.1002/mats.202000047
- By:
- Publication type:
- Article
Method for Extracting True Stress from TEM in situ Compression Testing.
- Published in:
- Microscopy & Microanalysis, 2019, p. 1826, doi. 10.1017/S1431927618009613
- By:
- Publication type:
- Article
Anomalous Tensile Detwinning in Twinned Metallic Nanowires.
- Published in:
- Microscopy & Microanalysis, 2019, p. 1824, doi. 10.1017/S1431927618009601
- By:
- Publication type:
- Article
Direct Observation of SRO effect of Ti-6Al Alloy Using Energy-filtered TEM and Scanning Nanobeam Electron Diffraction.
- Published in:
- 2019
- By:
- Publication type:
- Abstract
Implications of stress concentrators and work hardening in flat tensile samples subjected to milling and abrasive water jet machining.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 1, p. 343, doi. 10.1007/s00170-024-14118-1
- By:
- Publication type:
- Article
A novel assessment study of surface integrity for nickel-based superalloy milled by abrasive waterjet considering the abrasive embedding.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 3/4, p. 1603, doi. 10.1007/s00170-024-14623-3
- By:
- Publication type:
- Article
Experimental study on the effect of minimum quantity lubrication on the grinding surface/subsurface of nickel-based single-crystal superalloys.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 134, n. 11/12, p. 5375, doi. 10.1007/s00170-024-14441-7
- By:
- Publication type:
- Article
Analysis of abrasive impact wear of the Mn8/SS400 bimetal composite using a newly designed wear testing rig.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 134, n. 5/6, p. 2781, doi. 10.1007/s00170-024-14310-3
- By:
- Publication type:
- Article
Experimental study of surface residual stress and hardness of TiBw mesh reinforced titanium matrix composites in rotary ultrasonic grinding.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 9/10, p. 4807, doi. 10.1007/s00170-024-13938-5
- By:
- Publication type:
- Article
Tribological behaviour of microindented 100Cr6 steel surfaces in dry contact conditions.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 5/6, p. 2381, doi. 10.1007/s00170-024-13868-2
- By:
- Publication type:
- Article
Characterization of heterogeneous mechanical properties for thick welded joints with flow stress variation in the transverse and thickness directions.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1833, doi. 10.1007/s00170-024-13901-4
- By:
- Publication type:
- Article
Development of a low-frequency vibration–assisted turning device for nickel-based alloys.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 1/2, p. 321, doi. 10.1007/s00170-024-13705-6
- By:
- Publication type:
- Article
Research on surface integrity of TC4 titanium alloy by ultrasonic surface rolling peening.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 9/10, p. 4795, doi. 10.1007/s00170-024-13597-6
- By:
- Publication type:
- Article
Optimization of electric current-assisted sustainable burnishing process of additively manufactured Inconel 718: trade-off between production rate and fatigue life.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 3067, doi. 10.1007/s00170-024-13417-x
- By:
- Publication type:
- Article
Multi-layer solid-state ultrasonic additive manufacturing of aluminum/copper: local properties and texture.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 3/4, p. 2061, doi. 10.1007/s00170-024-13490-2
- By:
- Publication type:
- Article
Machinability investigation of 254 SMO super austenitic stainless steel in end milling under different cutting and lubri-cooling conditions.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 12, p. 6061, doi. 10.1007/s00170-024-13375-4
- By:
- Publication type:
- Article
Circular usage of waste cooking oil towards green electrical discharge machining process with lower carbon emissions.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 9/10, p. 5133, doi. 10.1007/s00170-024-13322-3
- By:
- Publication type:
- Article
Effect of cutting feed rate on machining performance and surface integrity in cutting process of Ti-6Al-4V alloy.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 5/6, p. 2791, doi. 10.1007/s00170-023-12458-y
- By:
- Publication type:
- Article
Investigation of machining property and sustainability performance of cryogenic turning of GH605 superalloy.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 5/6, p. 2165, doi. 10.1007/s00170-023-10816-4
- By:
- Publication type:
- Article
Spinning process of 2219 aluminum alloy tubes for used in hydroforming.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5479, doi. 10.1007/s00170-024-13070-4
- By:
- Publication type:
- Article
Parametric effects of single-point incremental forming on the hardness of high carbon steel sheets.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3683, doi. 10.1007/s00170-023-12527-2
- By:
- Publication type:
- Article
Theoretical and experimental research on a novel bending process for high-strength steel thin-walled tubes.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 5/6, p. 2457, doi. 10.1007/s00170-023-12448-0
- By:
- Publication type:
- Article
Investigation on the high-feed milling of M28.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 1/2, p. 127, doi. 10.1007/s00170-023-12005-9
- By:
- Publication type:
- Article
On the cutting performance and chip characteristics of WNbMoTaZr<sub>0.5</sub> refractory high entropy alloy.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 11/12, p. 4893, doi. 10.1007/s00170-023-12252-w
- By:
- Publication type:
- Article
Microstructure evolution of S-TC4 titanium alloy blade preformed by cross wedge rolling.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 9/10, p. 3937, doi. 10.1007/s00170-023-12128-z
- By:
- Publication type:
- Article
Investigation on deformation characteristic of electromagnetic punching process in AA5182 aluminum alloy sheet.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2347, doi. 10.1007/s00170-023-12037-1
- By:
- Publication type:
- Article
Effect of laser shock peening on the tensile behavior and notch sensitivity of Ni-based single-crystal superalloy.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 7/8, p. 3267, doi. 10.1007/s00170-023-10954-9
- By:
- Publication type:
- Article
The friction mechanics model within chip-tool-workpiece dual interfaces for cutting nickel-based superalloy at the cooling and lubrication conditions of the three forms oil-on-water mist in wide temperature range.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 3/4, p. 1135, doi. 10.1007/s00170-022-10630-4
- By:
- Publication type:
- Article
Study on the surface integrity of 7050 aluminum alloy with different crystal orientations during high-speed machining.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 661, doi. 10.1007/s00170-022-10717-y
- By:
- Publication type:
- Article
Phenomenological model of hardening and flow for Ti-6Al-4 V titanium alloy sheets under hot forming conditions.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 91, doi. 10.1007/s00170-022-10629-x
- By:
- Publication type:
- Article
Formability improvement in Ti–6Al–4 V sheet at room temperature by pulsating hydraulic bulging: experimental and numerical investigations.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 7/8, p. 2903, doi. 10.1007/s00170-022-10693-3
- By:
- Publication type:
- Article
Numerical simulation of the residual stress in the Mg-5Zn-3.5Sn-1Mn-0.5Ca-0.5Cu alloy with different extrusion parameters.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 1/2, p. 219, doi. 10.1007/s00170-022-10533-4
- By:
- Publication type:
- Article
Strengthening of duplex stainless steel processed by equal channel angular pressing (ECAP).
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 123, n. 5/6, p. 2261, doi. 10.1007/s00170-022-10311-2
- By:
- Publication type:
- Article
Optimization design of process parameters for cold and hot composite roll forming of the AHSS square tube using response surface methodology.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 123, n. 1/2, p. 527, doi. 10.1007/s00170-022-10119-0
- By:
- Publication type:
- Article
Surface generation on titanium alloy through powder-mixed electric discharge machining with the focus on bioimplant applications.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 122, n. 3/4, p. 1395, doi. 10.1007/s00170-022-09927-1
- By:
- Publication type:
- Article
Numerical and experimental analysis of electrohydraulic forming of Al 5052 and Al 6061 using conical die.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 122, n. 1, p. 303, doi. 10.1007/s00170-022-09373-z
- By:
- Publication type:
- Article
Bimetallic additively manufactured structure (BAMS) of Inconel 625 and austenitic stainless steel: effect of heat-treatment on microstructure and mechanical properties.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 121, n. 11/12, p. 7539, doi. 10.1007/s00170-022-09723-x
- By:
- Publication type:
- Article
Experimental study on surface integrity of Inconel 690 milled by coated carbide inserts.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 121, n. 5/6, p. 3025, doi. 10.1007/s00170-022-09456-x
- By:
- Publication type:
- Article
A novel tool to enhance the lubricant efficiency on induction heat-assisted incremental sheet forming of Ti-6Al-4 V sheets.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 11/12, p. 8239, doi. 10.1007/s00170-022-09284-z
- By:
- Publication type:
- Article
Crystal plasticity quantification of laser peening strengthening effects on AA2195-T6 friction stir welded joints.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 11/12, p. 7873, doi. 10.1007/s00170-022-09255-4
- By:
- Publication type:
- Article