We found a match
Your institution may have access to this item. Find your institution then sign in to continue.
- Title
Thermal design, modeling and validation of a steam-reforming reactor for fuel cell applications.
- Authors
Gianotti Pret, Marco; Ferrero, Domenico; Lanzini, Andrea; Santarelli, Massimo
- Abstract
This work deals with the design and modeling of a fuel processor integrated in a Solid Oxide Fuel Cell (SOFC) system. The reactor performs the steam reforming of the primary fuel of the SOFC anode, and it is thermally sustained by the combustion of the lean anode exhaust stream. A computational fluid dynamic (CFD) model of the catalytic bed reactor that takes into account the steam-reforming kinetic mechanisms was implemented and validated against experimental measurements on an electrically heated reactor that is operated in conjunction with an SOFC stack. The numerical model was subsequently applied to the design and simulation of a novel reactor that is thermally integrated with the rest of the plant. The purpose of this work is to find a reactor's configuration that is suitable for full-scale applications, in which the endothermic reforming reaction is sustained by the exothermicity of other components within the fuel cell plant. The new reactor has been designed by integrating the reformer and the after-burning section of the SOFC system in a single device, in which the reactor is heated by the combustion of the anode's exhaust. The results of the simulation show an improvement of the reactor's performance with an increased CH 4 conversion, a higher H 2 yield and a higher outlet temperature if compared to the prototype reactor.
- Subjects
SOLID oxide fuel cells; THERMAL analysis; STEAM reforming; CHEMICAL reactors; FUEL processors; COMPUTATIONAL fluid dynamics
- Publication
Chemical Engineering Research & Design: Transactions of the Institution of Chemical Engineers Part A, 2015, Vol 104, p503
- ISSN
0263-8762
- Publication type
Academic Journal
- DOI
10.1016/j.cherd.2015.09.016