Works matching DE "MICROSTRUCTURE"

Results: 5000

Micro-texture-mediated dynamic hetero-deformation enabling high strength-ductility in a dilute Mg-Al-Ca-Mn alloy.

Published in:

2025

By:

Wang, Si-Qing;
Wang, Tong;
Wang, Shi-Chao;
Chen, Jia-Rui;
Jia, Hai-Long;
Zha, Min;
Wang, Hui-Yuan

Publication type:

Report

Achieving strength-ductility synergistic improvement in Mg alloy via non-uniform precipitate-induced nanoscale-microzone heterostructure.

Published in:

2025

By:

Li, Zehua;
Zhang, Jinghuai;
Sun, Bin;
Liu, Shujuan;
Qiu, Xin;
Liu, Liyuan;
Zhi, Gejie;
He, Yuying;
Yang, Qiang;
Gu, Hao;
Wu, Ruizhi

Publication type:

Report

Effect of Sinter Temperature and Thermochemical Coating on Mechanical Properties of Ti6Al4V Produced by Powder Metallurgy.

Published in:

Journal of Molecular & Engineering Materials, 2025, v. 13, n. 3, p. 1, doi. 10.1142/S2251237325500054

By:

Kinaci, Bahadir Furkan;
Erden, Mehmet Akif;
Çuğ, Harun;
Özarpa, Cevat;
Çiçek, Bünyamin

Publication type:

Article

Formulation of Low‐Fat Mozzarella Cheese Using Aloe Vera Mucilage as a Potential Fat Replacer: Part 2—Characterization of the Microstructure and Rheological Properties of Low‐Fat Mozzarella Cheese.

Published in:

European Journal of Lipid Science & Technology, 2025, v. 127, n. 5, p. 1, doi. 10.1002/ejlt.70019

By:

Akhtar, Aqsa;
Araki, Tetsuya;
Kamata, Tatsuki;
Nei, Daisuke;
Khalid, Nauman

Publication type:

Article

Flow Softening and Microstructure Evolution of Austenitic Stainless Steel during Hot Compression.

Published in:

Physics of Metals & Metallography, 2025, v. 126, n. 1, p. 68, doi. 10.1134/S0031918X24602117

By:

Jian Huang;
Pang, Zong Xu;
Zhang, Jian Ping;
Wang, Yong;
Zhong, Li Li;
Zhao, Bao Chun

Publication type:

Article

The Effect of Tungsten on the Temperature, Combustion Rate, and Structure of a TiC–NiCr-Based Material Synthesized in the SHS Mode.

Published in:

Physics of Metals & Metallography, 2025, v. 126, n. 1, p. 42, doi. 10.1134/S0031918X24601082

By:

Antipov, M. S.;
Ivanov, A. S.;
Sivakova, A. O.;
Bazhin, P. M.

Publication type:

Article

Evolution of Microstructure and Phase Composition of Single Crystals of Nickel-Based Superalloy in the Process of High-Temperature Creep.

Published in:

Physics of Metals & Metallography, 2025, v. 126, n. 1, p. 35, doi. 10.1134/S0031918X24602592

By:

Svetlov, I. L.;
Petrushin, N. V.;
Zaitsev, D. V.;
Epishin, A. I.;
Elyutin, E. S.;
Raevskikh, A. N.

Publication type:

Article

Influence of MgF2/MgO Mass Ratios on the Microstructure and Corrosion Properties of Micro-arc Oxidation Coatings on Magnesium Alloys.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2025, v. 77, n. 6, p. 4557, doi. 10.1007/s11837-025-07354-7

By:

Wang, Yujie;
Zhang, Qingxia;
Zhang, Peng;
Du, Yunhui;
Liu, Kun;
He, Pengfei;
Li, Changqing

Publication type:

Article

Study on Integrated Hot Processing Map of Ti-3Mo-6Cr-3Al-3Sn Titanium Alloy Based on Different Flow Instability Criteria.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2025, v. 77, n. 6, p. 4733, doi. 10.1007/s11837-025-07349-4

By:

Liu, Xuejia;
Zhang, Haoyu;
Zhang, Yanxiang;
Wang, Yang;
Fang, Feng

Publication type:

Article

Microstructural Evolution and Mechanical Properties of Al0.7CoCrFeNiCu High-Entropy Alloy During Annealing.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2025, v. 77, n. 6, p. 4545, doi. 10.1007/s11837-025-07327-w

By:

Jiang, Kai;
Chen, Xu;
Liu, Ye;
Zhang, Lin;
He, Shuang;
Li, Qihan;
Luo, Yicheng;
Gorbatov, Oleg I.;
Du, Peinan;
Qu, Xuanhui

Publication type:

Article

Accelerated Correlation of Microstructure–Mechanical Property Relationships in Laser Clad Steels.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2025, v. 77, n. 6, p. 4081, doi. 10.1007/s11837-025-07322-1

By:

Schmalbach, Kevin M.;
Hintsala, Eric D.;
Bhowmick, Sanjit;
Stauffer, Douglas D.

Publication type:

Article

Two-Month In Vitro Degradation of 3D-Printed Biodegradable FeMnC Alloys for Biomedical Applications.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2025, v. 77, n. 6, p. 4414, doi. 10.1007/s11837-025-07274-6

By:

Cherqaoui, Abdelhakim;
Cao, Quang Nguyen;
Paternoster, Carlo;
Gélinas, Simon;
Bieda, Magdalena;
Jarzębska, Anna;
Blais, Carl;
Mantovani, Diego

Publication type:

Article

Exploring the Potential of ATUM-SEM for Enhanced Characterization of Human Trabecular Bone in Biomaterials Research.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2025, v. 77, n. 6, p. 4273, doi. 10.1007/s11837-025-07212-6

By:

Vistoso, Valeria;
Ferté, Tom;
Buccino, Federica;
Vergani, Laura;
Ersen, Ovidiu;
Carradó, Adele

Publication type:

Article

High Strength and High Damping of AA6061/Zn Multilayer Composites Processed by Accumulative Roll Bonding.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 10, p. 1, doi. 10.1002/adem.202500532

By:

Chen, Junlan;
Sun, Yan;
Jiang, Yuankai;
Sun, Meng;
Zhang, Tao;
Hao, Ting;
Jiang, Weibin;
Wang, Xianping;
Fang, Qianfeng

Publication type:

Article

Tailoring the Microstructure and Mechanical Properties of Ti1.5NbZrV0.4Mo0.6 High Entropy Alloy via C and Si Doping.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 10, p. 1, doi. 10.1002/adem.202403037

By:

Chen, Yao;
Yu, Jiaqi;
Hao, Shirui;
Wang, Qi;
Qin, Gang;
Chen, Ruirun

Publication type:

Article

Synergistic Effect of Surface Microstructure and Ag3PO4 on Antimicrobial Performance of Polypropylene‐Based Composites.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 10, p. 1, doi. 10.1002/adem.202402995

By:

He, Jiayi;
Li, Zihan;
Wang, Qilong;
Pei, Yameng;
Cai, Changmin;
Chen, Anfu;
Huang, Lijia

Publication type:

Article

High‐Entropy Ti, Zr, Hf, Ta Multiphase Diboride with Deformation Resistance up to 2000 °C.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 10, p. 1, doi. 10.1002/adem.202402723

By:

Badica, Petre;
Grigoroscuta, Mihai Alexandru;
Kuncser, Andrei Cristian;
Vasylkiv, Oleg

Publication type:

Article

Enhancing Workability Through Adjusting Element Content: A Study on the Hot Deformation Behavior of a Modified Titanium Alloy.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 10, p. 1, doi. 10.1002/adem.202402364

By:

Liu, Ying‐Ying;
Yang, Qi‐Hao;
Tian, Wan‐Tao;
He, Tao;
Cui, Lin‐Lin;
Liu, Xiao‐Fei;
Liu, Shi‐Feng;
Wang, Kuai‐She

Publication type:

Article

Effect of sea salt on the interaction between simulated corium and concrete.

Published in:

Journal of Nuclear Science & Technology, 2025, v. 62, n. 6, p. 573, doi. 10.1080/00223131.2025.2456565

By:

Sudo, Ayako;
Sato, Takumi;
Takano, Masahide

Publication type:

Article

A generative diffusion-based AI-model to scrutinise the microstructural degradation of isothermally aged Cu-SAC305 interfaces.

Published in:

NPJ Materials Degradation, 2025, v. 9, n. 1, p. 1, doi. 10.1038/s41529-025-00603-9

By:

Cui, Charlotte;
Chamasemani, Fereshteh Falah;
Reisinger, Michael;
Imrich, Peter;
Hartner, Walter;
Robl, Werner;
Brunner, Roland

Publication type:

Article

Study on the Surface Properties of Ti2AlNb Laser Additive Cladding Layer Under Ultrasonic Micro-forging.

Published in:

Metallurgical & Materials Transactions. Part B, 2025, v. 56, n. 3, p. 2768, doi. 10.1007/s11663-025-03522-x

By:

Gao, Guofu;
Wang, Guangmiao;
Pan, Xianrong;
Wei, Chenyang;
Xiang, Yunfei;
Xiang, Daohui

Publication type:

Article

Microstructure Clones.

Published in:

Experimental Mechanics, 2025, v. 65, n. 5, p. 729, doi. 10.1007/s11340-025-01158-1

By:

Fitzgerald, K.M.;
Gilliland, W.;
Lim, H.;
Ruggles, T.;
Aragon, N.;
Carroll, J.D.

Publication type:

Article

Ti-6Al-4V 積層造形熱処理材におけるα′ 相の分解と引張特性.

Published in:

Journal of the Japan Society of Powder & Powder Metallurgy / Funtai Oyobi Fummatsu Yakin, 2025, v. 72, n. 4, p. 79, doi. 10.2497/jjspm.25-00001

By:

阿南伶永大;
刈屋翔太;
Shufeng LI;
Yafeng YANG;
梅田純子;
近藤勝義

Publication type:

Article

Retraction Note: Microstructure, electrical conductivity, and wear behavior of aluminum-carbon nanotubes and biosynthesized silver nanoparticles composites.

Published in:

2025

By:

Nwoji, Clifford Ugochukwu;
Aigbodion, Victor Sunday;
John, John Akpan

Publication type:

Correction Notice

Retraction Note: Unveiling interrupted rolling strategy as post-processing impact on dual phase mechanical characteristics and microstructure Mg-8%Li/bagasse nanoparticle composite.

Published in:

2025

By:

Ezzat, Abdelrahman Osama;
Aigbodion, Victor Sunday;
Al-Lohedan, Hamad A.;
Ozoude, Chinemerem Jerry

Publication type:

Correction Notice

Analysis of a Coated Fastener that Failed by Liquid Metal Embrittlement.

Published in:

Journal of Failure Analysis & Prevention, 2025, v. 25, n. 2, p. 583, doi. 10.1007/s11668-025-02146-2

By:

Newton, Jesse R.;
Tartaglia, John M.

Publication type:

Article

MICROSTRUCTURE CHARACTERISATION OF THE LASER-HYBRID-WELDED ALUMINIUM ALLOY EN AW-5454-D.

Published in:

Materials & Technologies / Materiali in Tehnologije, 2025, v. 59, n. 2, p. 163, doi. 10.17222/mit.2024.1384

By:

Balant, Matjaž;
Donik, Črtomir;
Vuherer, Tomaž;
Rudolf, Rebeka

Publication type:

Article

Interface and strain energy driven variant selection in lamellar Ti–Al alloys.

Published in:

Discover Nano, 2025, v. 20, n. 1, p. 1, doi. 10.1186/s11671-025-04258-y

By:

Zhang, Zan;
Zhuo, Jicheng;
Niu, Kunning;
Zhang, Haiwei;
Sang, Peng;
Wang, Shenglong;
Li, Yongsheng

Publication type:

Article

On a fourth-order Allen-Cahn type equation with degenerate mobility.

Published in:

Discrete & Continuous Dynamical Systems - Series S, 2025, v. 18, n. 7, p. 1, doi. 10.3934/dcdss.2025029

By:

Shi, Wei;
Li, Lu;
Yang, Xin-Guang;
Miranville, Alain

Publication type:

Article

Understanding the Role of Quartz Powder Content and Fineness on the Micro-Structure and Mechanical Performance of UHPC.

Published in:

Buildings (2075-5309), 2025, v. 15, n. 9, p. 1513, doi. 10.3390/buildings15091513

By:

Xu, Jianguang;
Li, Yongsheng;
Huang, Yue;
Yuan, Guojian;
Cao, Zhonglu;
Zhang, Wei;
Zheng, Heping;
Zang, Yun;
Mao, Xingtai;
Li, Mengmeng

Publication type:

Article

Improving Tribological Performance of Poly(phenylene sulfide) by Incorporating PTFE Fillers: The Influence of Filler Type and Concentrations.

Published in:

Polymers (20734360), 2025, v. 17, n. 9, p. 1222, doi. 10.3390/polym17091222

By:

Li, Junpeng;
Li, Jixiang;
Xiang, Jianbo;
Gong, Xiaoxi;
Xie, Peng;
Chen, Yang;
Liang, Mei;
Zou, Huawei;
Zhou, Shengtai

Publication type:

Article

A Study on the Effect of Different Cementitious Materials on the Mechanical Properties and Microscopic Characteristics of Alkali-Activated Green Ultra-High Performance Concrete (GUHPC).

Published in:

Materials (1996-1944), 2025, v. 18, n. 9, p. 2163, doi. 10.3390/ma18092163

By:

Liao, Zhiling;
Xue, Wanwen;
Liao, Lin;
Hao, Ruiqing;
Shen, Litao;
Cui, Dongxia

Publication type:

Article

Effects of Solid–Solution Temperature on Microstructures and Mechanical Properties of 2200 MPa Grade Secondary Hardening Steel.

Published in:

Materials (1996-1944), 2025, v. 18, n. 9, p. 2126, doi. 10.3390/ma18092126

By:

Yang, Cheng;
Li, Yong;
Han, Shun;
Pang, Xuedong;
Geng, Ruming;
Li, Xinyang;
Wang, Chunxu

Publication type:

Article

Grain Growth Kinetics of a Nickel-Based Superalloy Under Electric Pulse Treatment.

Published in:

Materials (1996-1944), 2025, v. 18, n. 9, p. 2019, doi. 10.3390/ma18092019

By:

Xiang, Zhiyu;
Li, Hongwei;
Zhang, Xin;
Gao, Pengfei;
Zhan, Mei

Publication type:

Article

Enamel-like Polymer-Infiltrated Ceramic Materials for Dental Applications.

Published in:

Journal of Dental Research, 2025, v. 104, n. 6, p. 629, doi. 10.1177/00220345251313998

By:

Zhou, X.;
Liu, S.;
Chen, J.;
Zhu, L.;
Tong, X.;
Chen, Z.;
Li, Y.;
Lin, J.;
Wen, C.;
Ma, J.

Publication type:

Article

Investigation of Microstructural, Mechanical and Tribological Properties of NiTi/nB4C Metal Matrix Composites Produced by Spark Plasma Sintering.

Published in:

Science of Sintering, 2025, v. 57, n. 1, p. 53, doi. 10.2298/SOS240502023Y

By:

Yilmaz, Taha Alper;
Tasci, Ufuk;
Tanis, Naci Arda;
Gokmese, Hakan;
Kocak, Muharrem;
Bostan, Bulent

Publication type:

Article

Composition and microstructure of Yuan Dynasty Jun glazed stoneware from Yanjialiang site, Inner Mongolia, China.

Published in:

npj Heritage Science, 2025, v. 13, n. 1, p. 1, doi. 10.1038/s40494-025-01711-0

By:

Shi, Ke;
Yong, Mei;
Dong, Lijun

Publication type:

Article

Microstructure and Mechanical Properties of Nb-Reinforced Bulk Metallic Glass Composites Prepared by Laser Powder Bed Fusion.

Published in:

Strength of Materials, 2025, v. 57, n. 1, p. 168, doi. 10.1007/s11223-025-00755-8

By:

Ge, Y. Q.;
Yin, Y.;
Chang, Z. X.;
Xu, H. J.;
Bi, W. H.

Publication type:

Article

The petrology of the Ozerki meteorite constrained by electron backscatter diffraction and X‐ray computed tomography.

Published in:

Meteoritics & Planetary Science, 2025, v. 60, n. 5, p. 1095, doi. 10.1111/maps.14344

By:

Macente, Alice;
Daly, Luke;
Griffin, Sammy;
Gritsevich, Maria;
Moilanen, Jarmo;
Einsle, Josh Franz;
Trimby, Patrick;
Mulcahy, Chris;
Moffat, Jonathan;
Ruzicka, Alexander M.

Publication type:

Article

Effect of Service Exposure on Creep Crack Growth Nature of P91 Steel.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 6, p. 1964, doi. 10.1007/s11661-025-07776-7

By:

Singh, Chandra Veer;
Bagui, Sumanta;
Siefert, John;
Tarafder, Soumitra

Publication type:

Article

Phase Evolution and Mechanical Behavior of a Novel Ti–6.3Cu–2.2Fe−2.1Al Alloy Processed by Wire-Arc Directed Energy Deposition.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 6, p. 1957, doi. 10.1007/s11661-025-07766-9

By:

Klein, Martin;
Staufer, Ella;
Zhang, Duyao;
Edtmaier, Christian;
Horky, Jelena;
Schmitz-Niederau, Martin;
Qiu, Dong;
Easton, Mark;
Klein, Thomas

Publication type:

Article

Identification of Viscoelastic Properties of Epoxy Composites with Magnesium Oxide and Boron Carbide Additives.

Published in:

Mechanics of Composite Materials, 2025, v. 61, n. 2, p. 257, doi. 10.1007/s11029-025-10274-x

By:

Belyak, O. A.;
Suvorova, T. V.;
Manturov, D. S.;
Ananko, A. M.

Publication type:

Article

Study on the Effect of Y on the Morphology and Dispersion of TiB2 Particles in TiB2/Al Composites.

Published in:

Physica Status Solidi. A: Applications & Materials Science, 2025, v. 222, n. 9, p. 1, doi. 10.1002/pssa.202400876

By:

Deng, Yungang;
Xu, Pian;
Lu, Baiping;
Lu, Gang;
Zhang, Lei;
Yan, Yuping

Publication type:

Article

A Mechanically Robust In-Situ Solidified Polymer Electrolyte for SiOx-Based Anodes Toward High-Energy Lithium Batteries.

Published in:

Nano-Micro Letters, 2025, v. 17, n. 1, p. 1, doi. 10.1007/s40820-025-01759-4

By:

Luo, Cizhen;
Zhang, Huanrui;
Sun, Chenghao;
Chen, Xing;
Zhang, Wenjun;
Mu, Pengzhou;
Xu, Gaojie;
Wu, Rongxian;
Lv, Zhaolin;
Zhou, Xinhong;
Cui, Guanglei

Publication type:

Article

Microstructural, Electrochemical, and Mechanical Assessment of Additive Manufactured Titanium Grade 23 for Dental Implants Application.

Published in:

In Vivo, 2025, v. 39, n. 3, p. 1751, doi. 10.21873/invivo.13978

By:

TESCHKE, MIRKO;
GRAFE, LORENZ;
STAMMKÖTTER, SEBASTIAN;
TENKAMP, JOCHEN;
WALTHER, FRANK

Publication type:

Article

Toughness-drop in AISI 316L pipe after service exposure at 720 °C for 100,700 hours.

Published in:

Tecnologia em Metalurgia, Materiais e Mineração, 2024, v. 21, p. 1, doi. 10.4322/2176-1523.20243080

By:

Pereira de Moraes, Flavio;
Machado Amaral, Emanuelle;
Beneduce Neto, Flávio;
Fernando Padilha, Angelo

Publication type:

Article

Effects of biostimulation treatment methods on mechanical properties and microstructure characteristics of biocemented soil.

Published in:

Acta Geotechnica, 2025, v. 20, n. 5, p. 2163, doi. 10.1007/s11440-025-02548-4

By:

Fan, Wenjun;
Xiao, Yang;
Cao, Baofeng;
Wu, Shifan;
Cui, Hao;
Chu, Jian;
Liu, Hanlong

Publication type:

Article

Optimize the Corrosion and Mechanical Performance of Additive‐Manufactured Nano‐Size WC‐Reinforced Stainless Steel Matrix Composites by Heat Treatments.

Published in:

Materials & Corrosion / Werkstoffe und Korrosion, 2025, v. 76, n. 5, p. 620, doi. 10.1002/maco.202414705

By:

Zhou, Yiqi;
Xu, Xiaochang;
Wang, Shuoyang;
Kong, Decheng;
Zhang, Fan;
Li, Lili;
Liu, Tingting;
Li, Xiaogang;
Qu, Xuanhui;
Yan, Yu;
Dong, Chaofang

Publication type:

Article

Microstructure and Electrochemical Corrosion Behavior of Vacuum‐Cladded FeNiCoCrMoBSi High‐Entropy Alloy Coating.

Published in:

Materials & Corrosion / Werkstoffe und Korrosion, 2025, v. 76, n. 5, p. 661, doi. 10.1002/maco.202414520

By:

Xie, Fang;
Zhai, Changsheng;
Zhang, Xi;
Jiang, Sainan;
Zhang, Xin;
Zheng, Hongxing;
Hua, Xijin

Publication type:

Article

Effect of Severe Plastic Deformation and Aging States on Microstructure and Mechanical Properties of 2024 Aluminum Alloy.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 9, p. 1, doi. 10.1002/adem.202402728

By:

Demirtas, Muhammet;
Yanar, Harun;
Uzun, Muhammet;
Ustalar, Melih;
Zhang, Zhenjun;
Dai, Renjie;
Jin, Jiewen;
Purcek, Gencaga

Publication type:

Article