Works matching DE "CHIPPERS (Landscape equipment)"

Results: 36

Fatal and Nonfatal Occupational Injuries Involving Wood Chippers -- United States, 1992-2002.

Published in:

MMWR: Morbidity & Mortality Weekly Report, 2004, v. 53, n. 48, p. 1130

By:

Struttmann, T. W.

Publication type:

Article

Bookbinding in Eighteenth-Century Nuremberg: Reconstructing an Edge Plough from the Hausbücher der Nürnberger Zwölfbrüderstiftungen.

Published in:

Journal 18, 2024, n. 18, p. 1

By:

Siebel-Achenbach, Ellen

Publication type:

Article

SUPPORT AND DIAGNOSTIC SYSTEM FOR DRUM TYPE CHEEPER MACHINES.

Published in:

Annals of DAAAM & Proceedings, 2012, v. 23, n. 1, p. 0657

By:

ZARINS, arcis;
TORIMS, oms;
MARIS, umanis;
ANDRIS, amans

Publication type:

Article

COMPUTER AND EXPERIMENTAL SIMULATION OF BIOMASS PRODUCTION USING DRUM CHIPPER.

Published in:

International Journal of Simulation Modelling (IJSIMM), 2013, v. 12, n. 1, p. 39, doi. 10.2507/IJSIMM12(1)4.223

By:

Krajnc, M.;
Dolsak, B.

Publication type:

Article

Development and application of a noise‐hazard scheme for road maintainers.

Published in:

American Journal of Industrial Medicine, 2020, v. 63, n. 5, p. 429, doi. 10.1002/ajim.23091

By:

Cavallari, Jennifer M.;
Garza, Jennifer L.;
DiFrancesco, Jackie;
Dugan, Alicia G.;
Walker, Erica D.

Publication type:

Article

A Laboratory Wood Chipper for Chipping Under Realistic Conditions.

Published in:

Experimental Mechanics, 2011, v. 51, n. 8, p. 1309, doi. 10.1007/s11340-010-9452-1

By:

Hellström, L.;
Gradin, P.;
Gulliksson, M.;
Carlberg, T.

Publication type:

Article

Fuel Consumption Test Results for a Self-Adaptive, Maintenance-Free Wood Chipper Drive Control System.

Published in:

Applied Sciences (2076-3417), 2020, v. 10, n. 8, p. 2727, doi. 10.3390/app10082727

By:

Warguła, Łukasz;
Krawiec, Piotr;
Waluś, Konrad Jan;
Kukla, Mateusz

Publication type:

Article

Impact of Compressed Natural Gas (CNG) Fuel Systems in Small Engine Wood Chippers on Exhaust Emissions and Fuel Consumption.

Published in:

Energies (19961073), 2020, v. 13, n. 24, p. 6709, doi. 10.3390/en13246709

By:

Warguła, Łukasz;
Kukla, Mateusz;
Lijewski, Piotr;
Dobrzyński, Michał;
Markiewicz, Filip

Publication type:

Article

Reduction in Operating Costs and Environmental Impact Consisting in the Modernization of the Low-Power Cylindrical Wood Chipper Power Unit by Using Alternative Fuel.

Published in:

Energies (19961073), 2020, v. 13, n. 11, p. 2995, doi. 10.3390/en13112995

By:

Warguła, Łukasz;
Kukla, Mateusz;
Krawiec, Piotr;
Wieczorek, Bartosz

Publication type:

Article

New drum-chipping technology for a more uniform size distribution of wood chips.

Published in:

Holzforschung: International Journal of the Biology, Chemistry, Physics, & Technology of Wood, 2020, v. 74, n. 2, p. 116, doi. 10.1515/hf-2018-0279

By:

Gard Timmerfors, Jessica;
Sjölund, Torbjörn;
Jönsson, Leif J.

Publication type:

Article

A model to predict productivity of different chipping operations.

Published in:

Southern Forests: A Journal of Forest Science, 2013, v. 75, n. 3, p. 129, doi. 10.2989/20702620.2013.816233

By:

Ghaffariyan, Mohammad R;
Spinelli, Raffaele;
Brown, Mark

Publication type:

Article

Biomass harvesting in Eucalyptus plantations in Western Australia.

Published in:

Southern Forests: A Journal of Forest Science, 2011, v. 73, n. 3/4, p. 149, doi. 10.2989/20702620.2011.639491

By:

Ghaffariyan, M R;
Brown, M;
Acuna, M;
Sessions, J;
Kuehmaier, M;
Wiedemann, J

Publication type:

Article

Determination Size Distribution of Shredded Vineyard Pruning Residues According to Variety.

Published in:

COMU Journal of Agriculture Faculty / ÇOMÜ Ziraat Fakültesi Dergisi, 2024, v. 12, n. 1, p. 140, doi. 10.33202/comuagri.1430164

By:

Öngören, Nurgül;
Sessiz, Abdullah

Publication type:

Article

Development of a Rice-Straw Disc Chipper.

Published in:

Journal of Soil Sciences & Agricultural Engineering, 2016, v. 7, n. 10, p. 705

By:

Mohamed, A. H. A.

Publication type:

Article

Top-down and bottom-up control of litter decomposers in streams.

Published in:

Freshwater Biology, 2014, v. 59, n. 10, p. 2172, doi. 10.1111/fwb.12420

By:

Gonçalves, Ana Lúcia;
Chauvet, Eric;
Bärlocher, Felix;
Graça, Manuel A. S.;
Canhoto, Cristina

Publication type:

Article

Selection of chipper engine size based on business scale and optimised cost of chipping and transportation.

Published in:

Journal of Forest Research, 2017, v. 22, n. 5, p. -1, doi. 10.1080/13416979.2017.1368168

By:

Yoshida, Mika;
Sakai, Hideo

Publication type:

Article

Importance of capital cost reduction of chippers and their required productivity.

Published in:

Journal of Forest Research, 2014, v. 19, n. 4, p. 361, doi. 10.1007/s10310-013-0426-x

By:

Yoshida, Mika;
Sakai, Hideo

Publication type:

Article

Understanding of colonization and breakdown of leaves by invertebrates in a tropical stream is enhanced by using biomass as well as count data.

Published in:

Hydrobiologia, 2014, v. 740, n. 1, p. 79, doi. 10.1007/s10750-014-1939-9

By:

Tonin, Alan;
Hepp, Luiz;
Restello, Rozane;
Gonçalves, José

Publication type:

Article

Vegetative Regeneration Capacities of Five Ornamental Plant Invaders After Shredding.

Published in:

Environmental Management, 2015, v. 55, n. 2, p. 423, doi. 10.1007/s00267-014-0398-4

By:

Monty, Arnaud;
Eugène, Marie;
Mahy, Grégory

Publication type:

Article

Analysis of Operating Conditions for Vibration of a Self-Propelled Monorail Branch Chipper.

Published in:

Agriculture; Basel, 2023, v. 13, n. 1, p. 101, doi. 10.3390/agriculture13010101

By:

Gong, Yanchen;
Ren, Longlong;
Han, Xiang;
Gao, Ang;
Jing, Shuaijie;
Feng, Chunliang;
Song, Yuepeng

Publication type:

Article

Safety Improvements on Wood Chippers Currently in Use: A Study on Feasibility in the Italian Context.

Published in:

Agriculture; Basel, 2017, v. 7, n. 12, p. 98, doi. 10.3390/agriculture7120098

By:

Bagagiolo, Giorgia;
Laurendi, Vincenzo;
Cavallo, Eugenio

Publication type:

Article

Innovative Solution for Reducing the Run-Down Time of the Chipper Disc Using a Brake Clamp Device.

Published in:

Agriculture; Basel, 2017, v. 7, n. 8, p. 71, doi. 10.3390/agriculture7080071

By:

Colantoni, Andrea;
Mazzocchi, Francesco;
Laurendi, Vincenzo;
Grigolato, Stefano;
Monarca, Francesca;
Monarca, Danilo;
Cecchini, Massimo

Publication type:

Article

Adaptation and Performance Evaluation of a Tractor Operated Wood Chipper Shredder.

Published in:

Pakistan Journal of Agricultural Research, 2019, v. 32, n. 1, p. 197, doi. 10.17582/journal.pjar/2019/32.1.197.204

By:

Shahid, Liaqat Ali;
Amjad, Nadeem;
Siddhu, Muhammad Abdul Hanan

Publication type:

Article

Performance and energy efficiency of alternative comminution principles: Chipping versus grinding.

Published in:

Scandinavian Journal of Forest Research, 2012, v. 27, n. 4, p. 393, doi. 10.1080/02827581.2011.644577

By:

Spinelli, Raffaele;
Cavallo, Eugenio;
Facello, Alessio;
Magagnotti, Natascia;
Nati, Carla;
Paletto, Giuseppe

Publication type:

Article

Mobile Chipper Design with FEM System Application.

Published in:

Journal of Research & Applications in Agricultural Engineering, 2023, v. 68, n. 1, p. 11, doi. 10.53502/GLKA1971

By:

Dzieniszewski, Grzegorz;
Nowak, Dawid;
Kuboń, Maciej;
Furyk-Grabowska, Karolina

Publication type:

Article

Failure Analysis of a Commercial Brush Chipper Hood.

Published in:

Journal of Failure Analysis & Prevention, 2011, v. 11, n. 6, p. 595, doi. 10.1007/s11668-011-9486-4

By:

Norfleet, David;
Stevenson, Michael;
Wilkinson, John;
Kenner, Matthew;
Brickman, Dennis

Publication type:

Article

Effect of the Cutting Speed on the Surface Quality of Black Spruce Cants Produced by a Chipper-Canter.

Published in:

Forest Products Journal, 2013, v. 63, n. 1/2, p. 39, doi. 10.13073/FPJ-D-13-00016

By:

Hernández, Roger E.;
Kuljich, Svetka;
Naffeti, Oussema;
Koubaa, Ahmed

Publication type:

Article

The Effect of Raw Material, Cut Length, and Chip Discharge on the Performance of an Industrial Chipper.

Published in:

Forest Products Journal, 2012, v. 62, n. 7/8, p. 584, doi. 10.13073/FPJ-D-12-00083.1

By:

Spinelli, Raffaele;
Magagnotti, Natascia

Publication type:

Article

DELIMBING HYBRID POPLAR PRIOR TO PROCESSING WITH A FLAIL/CHIPPER.

Published in:

Forest Products Journal, 2002, v. 52, n. 4, p. 85

By:

Hartsough, Bruce R.;
Spinelli, Raffaele;
Pottle, Steve J.

Publication type:

Article

The Effect of Knife Wear and Sharpening Mode on Chipper Productivity and Delays.

Published in:

Forests (19994907), 2024, v. 15, n. 7, p. 1101, doi. 10.3390/f15071101

By:

Mihelič, Matevž;
Vusić, Dinko;
Ursić, Branko;
Zadro, Antonio;
Spinelli, Raffaele

Publication type:

Article

Value Retention, Service Life, Use Intensity and Long-Term Productivity of Wood Chippers as Obtained from Contractor Records.

Published in:

Forests (19994907), 2017, v. 8, n. 12, p. 503, doi. 10.3390/f8120503

By:

Spinelli, Raffaele;
Magagnotti, Natascia;
Eliasson, Lars

Publication type:

Article

Cast Your Nets to the Right Side: Faith, Virtue, and the Morality of Food Choices.

Published in:

Christian Scholar's Review, 2020, v. 49, n. 2, p. 127

By:

McGowan, Michael

Publication type:

Article

Patterns of Knife Edge Recession in an Industrial Chipper-Canter.

Published in:

Forest Products Journal, 2015, v. 65, n. 7, p. 358, doi. 10.13073/FPJ-D-14-00057

By:

Ghosh, Shyamal C.;
Heidari, Majid;
Hernández, Roger E.;
Blais, Carl

Publication type:

Article

The carbon dioxide emission balance and ability to chip wood by 10 kW machines used in urban areas in terms of increasing interest in using wood biomass resources for personal use.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 4, p. 401, doi. 10.12913/22998624/196263

By:

Warguła, Łukasz;
Nati, Carla;
Wieczorek, Bartosz;
Bembenek, Michał

Publication type:

Article

Evaluation of wood cutting forces in dry and wet conditions by small-scale chipping tests applying different analysis methods.

Published in:

Wood Material Science & Engineering, 2019, v. 14, n. 3, p. 185, doi. 10.1080/17480272.2018.1458749

By:

Pichler, Philip;
Springer, Sebastian;
Leitner, Martin

Publication type:

Article

Effects of commercial thinning, log position in the stem, and cutting width on the surface quality of cants produced by a chipper-canter.

Published in:

Wood Material Science & Engineering, 2018, v. 13, n. 1, p. 28, doi. 10.1080/17480272.2016.1232308

By:

Cáceres, Claudia B.;
Hernández, Roger E.;
Kuljich, Svetka;
Koubaa, Ahmed

Publication type:

Article