Works matching DE "VICKERS hardness"
Results: 1295
بررسی اثر پارامترهای جوشکاری اغتشاشی اصطکاکی بر خواص مکانیکی ورقهای مسی تحت گاز هلیم
- Published in:
- Journal of Applied & Computational Sciences in Mechanics, 2024, v. 36, n. 4, p. 75, doi. 10.22067/jacsm.2024.85831.1226
- By:
- Publication type:
- Article
Evaluation of magnetic field annealing effect on Fe-25Cr-15Co-3Mo-0.3Ti alloy by first-order reversal curve analysis.
- Published in:
- Journal of Materials Science, 2025, v. 60, n. 6, p. 3148, doi. 10.1007/s10853-025-10615-0
- By:
- Publication type:
- Article
Ultrasonic vibration-assisted scribing of sapphire: effects of ultrasonic vibration and tool geometry.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3559, doi. 10.1007/s00170-025-15071-3
- By:
- Publication type:
- Article
Effect of Nb Addition on Compact Microstructure and Mechanical Properties of Gray Cast Iron for Cylinder Liner.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 1, p. 307, doi. 10.1007/s40962-024-01292-x
- By:
- Publication type:
- Article
Effects of mixing of europium oxide in resin composites on the fluorescence characteristics and mechanical properties.
- Published in:
- BDJ Open, 2025, v. 11, n. 1, p. 1, doi. 10.1038/s41405-025-00304-0
- By:
- Publication type:
- Article
Color Alterations, Flexural Strength, and Microhardness of 3D-Printed Resins Treated in Different Coloring Agents.
- Published in:
- International Journal of Prosthodontics, 2025, v. 38, n. 1, p. 111, doi. 10.11607/ijp.9043
- By:
- Publication type:
- Article
DUREZA SUPERFICIAL Y RESISTENCIA A LA COMPRESIÓN DE MATERIALES DE RESTAURACIÓN PARA DIENTES POSTERIORES.
- Published in:
- Odontología Pediátrica, 2024, v. 23, n. 2, p. 6
- By:
- Publication type:
- Article
Biomimetic and protective effects of bioactive toothpastes on eroded enamel surfaces.
- Published in:
- Brazilian Oral Research, 2024, v. 38, p. 1, doi. 10.1590/1807-3107bor-2024.vol38.0139
- By:
- Publication type:
- Article
Short curing time bulk fill composite systems: volumetric shrinkage, degree of conversion and Vickers hardness.
- Published in:
- Brazilian Oral Research, 2024, v. 38, p. 1, doi. 10.1590/1807-3107bor-2024.vol38.0030
- By:
- Publication type:
- Article
Comparative Evaluation of Microhardness of Hydrophilic Sealant and Flowable Composite on Permanent Molars-in vitro Study.
- Published in:
- Journal of Pioneering Medical Sciences, 2024, v. 13, n. 7, p. 192, doi. 10.47310/jpms2024130729
- By:
- Publication type:
- Article
Third harmonic shear horizontal waves for material degradation monitoring.
- Published in:
- Structural Health Monitoring, 2021, v. 20, n. 2, p. 475, doi. 10.1177/1475921720936983
- By:
- Publication type:
- Article
Investigating the impact of post-curing cycles on surface hardness and color stability in 3D printed resin crowns.
- Published in:
- Odontology, 2025, v. 113, n. 1, p. 156, doi. 10.1007/s10266-024-00956-8
- By:
- Publication type:
- Article
Influence of light exposure techniques on in vitro pulp temperature rise during bulk fill composite Class I restorations.
- Published in:
- Odontology, 2024, v. 112, n. 2, p. 479, doi. 10.1007/s10266-023-00867-0
- By:
- Publication type:
- Article
Temperature changes and hardness of resin-based composites light-cured with laser diode or light-emitting diode curing lights.
- Published in:
- Odontology, 2023, v. 111, n. 2, p. 387, doi. 10.1007/s10266-022-00745-1
- By:
- Publication type:
- Article
Effect of CeO<sub>2</sub> on high-temperature wear resistance of WC/Fe-based coatings.
- Published in:
- Surface Engineering, 2021, v. 37, n. 8, p. 982, doi. 10.1080/02670844.2020.1848008
- By:
- Publication type:
- Article
Enhancement of wear resistance by sand blasting-assisted rapid plasma nitriding for 304 austenitic stainless steel.
- Published in:
- Surface Engineering, 2020, v. 36, n. 5, p. 524, doi. 10.1080/02670844.2019.1641953
- By:
- Publication type:
- Article
Tribological properties of electrodeposited Ni–ZrO<sub>2</sub> nanocomposite coatings on copperplate of crystallizer.
- Published in:
- Surface Engineering, 2019, v. 35, n. 10, p. 919, doi. 10.1080/02670844.2018.1482675
- By:
- Publication type:
- Article
Elastic anisotropy of coatings by AFM analysis of microindentations.
- Published in:
- Surface Engineering, 2014, v. 30, n. 1, p. 41, doi. 10.1179/1743294413Y.0000000188
- By:
- Publication type:
- Article
Centrosymmetric crystal structure and third order nonlinear optical properties of [2(C<sub>10</sub>H<sub>20</sub>O<sub>5</sub>) NH<sub>4</sub>] [Cd (SCN)<sub>3</sub>]: CCTC single crystal for optical application.
- Published in:
- Optical & Quantum Electronics, 2023, v. 55, n. 12, p. 1, doi. 10.1007/s11082-023-05432-1
- By:
- Publication type:
- Article
Centrosymmetric structure of novel barium (II)-dibenzo-15-crown-5-ether-zinc (II)-tetra-thiocyanate single crystal for nonlinear optical application.
- Published in:
- Optical & Quantum Electronics, 2023, v. 55, n. 11, p. 1, doi. 10.1007/s11082-023-05173-1
- By:
- Publication type:
- Article
Study of microstructure evolution in the aluminum‒magnesium alloy AlMg6 after explosive welding and heat treatment.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 134, n. 9/10, p. 4451, doi. 10.1007/s00170-024-14404-y
- By:
- Publication type:
- Article
Characterisation results for oxide ceramic functionally graded with cemented carbide sintered by PECS.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 134, n. 3/4, p. 1365, doi. 10.1007/s00170-024-14229-9
- By:
- Publication type:
- Article
Study of the hardfacing process using self-shielding flux-cored wire with an exothermic addition with a combined oxidizer of the Al-(CuO/Fe<sub>2</sub>O<sub>3</sub>) system.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 134, n. 1/2, p. 309, doi. 10.1007/s00170-024-14115-4
- By:
- Publication type:
- Article
Influence of copper interlayer on the mechanical performance of friction stir welded AA2024.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 11/12, p. 5811, doi. 10.1007/s00170-024-14106-5
- By:
- Publication type:
- Article
Optimum heating time for warm forming of AA7075 aluminum alloy in T6 condition.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 11/12, p. 6005, doi. 10.1007/s00170-024-14084-8
- By:
- Publication type:
- Article
Study of the effect of laser beam welding on joint of Nimonic 80A superalloy: an experimental approach.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 11/12, p. 5501, doi. 10.1007/s00170-024-14081-x
- By:
- Publication type:
- Article
A comparative study of the thermal and mechanical cutting influence on the cut-edge hardness of structural steels S355 and S1100.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5951, doi. 10.1007/s00170-023-12937-2
- By:
- Publication type:
- Article
Densification, microstructure, and nanomechanical evaluation of pulsed electric sintered zirconia-silicon nitride reinforced Ti-6Al-4 V alloy.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 7/8, p. 3649, doi. 10.1007/s00170-023-12873-1
- By:
- Publication type:
- Article
Influence of the material manufacturing process on micromilling Ti6Al4V alloy.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 1/2, p. 23, doi. 10.1007/s00170-023-12215-1
- By:
- Publication type:
- Article
Intergranular corrosion and mechanical property evolution in AA2024 alloy through heat treatment.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 7/8, p. 3273, doi. 10.1007/s00170-023-12161-y
- By:
- Publication type:
- Article
Effect of high-density pulsed electric current on the formability of aluminum alloy.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 3/4, p. 1505, doi. 10.1007/s00170-023-11841-z
- By:
- Publication type:
- Article
Comparative study of corrosion susceptibility and microstructural effects on AA7075-T6 aluminum alloys under different heat treatments.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 9/10, p. 4123, doi. 10.1007/s00170-023-11731-4
- By:
- Publication type:
- Article
Influence of cusp magnetic field on the evolution of metallurgical and mechanical properties in GTAW of SS 304.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 11/12, p. 5199, doi. 10.1007/s00170-023-11441-x
- By:
- Publication type:
- Article
The influence of NbB inoculation on dendritic spacing and grain size of an aluminum 2017 alloy at different cooling rates.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 11/12, p. 5681, doi. 10.1007/s00170-023-11104-x
- By:
- Publication type:
- Article
Densification and wear behavior of Cu-TiC composites via spark plasma sintering in situ degassing.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 123, n. 7/8, p. 2415, doi. 10.1007/s00170-022-10346-5
- By:
- Publication type:
- Article
Densification and wear behavior of Cu-TiC composites via spark plasma sintering in situ degassing.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 123, n. 5/6, p. 2415, doi. 10.1007/s00170-022-10346-5
- By:
- Publication type:
- Article
Analysis of three-roller continuous and synchronous calibration process of straightness and ovality for large thin-walled pipes considering the weld.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 121, n. 9/10, p. 5957, doi. 10.1007/s00170-022-09656-5
- By:
- Publication type:
- Article
Preparation and forming mechanism of ultrathin-walled Ni-Cu alloy tubes with submicrometer structures by ball spinning.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 121, n. 7/8, p. 5427, doi. 10.1007/s00170-022-09738-4
- By:
- Publication type:
- Article
The microstructures and mechanical properties of underwater bobbin tool friction stir–welded 6082-T6 aluminum alloy.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 121, n. 1/2, p. 1443, doi. 10.1007/s00170-022-09311-z
- By:
- Publication type:
- Article
Microstructural and mechanical evaluations of SAW by manufactured granular basic bonded Cr, Mo, and Cr–Mo active fluxes on ST37 low carbon steel.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 9/10, p. 6335, doi. 10.1007/s00170-021-08238-1
- By:
- Publication type:
- Article
A novel approach to enhance mechanical properties during recycling of aluminum alloy scrap through friction stir consolidation.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 1989, doi. 10.1007/s00170-021-08346-y
- By:
- Publication type:
- Article
Component repair using additive manufacturing: experiments and thermal modeling.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 1/2, p. 719, doi. 10.1007/s00170-021-08265-y
- By:
- Publication type:
- Article
Investigation and process optimization for magnetic abrasive finishing additive manufacturing samples with different forming angles.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2355, doi. 10.1007/s00170-021-08083-2
- By:
- Publication type:
- Article
A characterization of laser cleaning painting layer from steel surface based on thermodynamic model.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1989, doi. 10.1007/s00170-021-07566-6
- By:
- Publication type:
- Article
Microstructure, hardness, and wear resistance of AZ91 magnesium alloy produced by friction stir processing with air-cooling.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 3/4, p. 1309, doi. 10.1007/s00170-021-07474-9
- By:
- Publication type:
- Article
Effects of CeO2 addition on microstructure and properties of ceramics reinforced Fe-based coatings by laser cladding.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2581, doi. 10.1007/s00170-021-07297-8
- By:
- Publication type:
- Article
Geometric influence of the laser-based powder bed fusion process in Ti6AL4V and AlSi10Mg.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 9/10, p. 3165, doi. 10.1007/s00170-021-07089-0
- By:
- Publication type:
- Article
Study on the geometrical dimensions and mechanical properties of Ti-6Al-4V alloy blade by laser metal deposition.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 3/4, p. 695, doi. 10.1007/s00170-021-06669-4
- By:
- Publication type:
- Article
The effects of geometry and laser power on the porosity and melt pool formation in additively manufactured 316L stainless steel.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 5/6, p. 1457, doi. 10.1007/s00170-020-06196-8
- By:
- Publication type:
- Article
Effect of pulsed electric current on electrically assisted indentation for surface texturing.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 1/2, p. 283, doi. 10.1007/s00170-020-06102-2
- By:
- Publication type:
- Article