Works matching DE "METAL cutting"

Results: 1915

Studying Heat-Affected Zone, Surface Roughness and Material Removal Rate in NPMEDM Process for Inconel 718 Using Nano Silicon Carbide Powder.

Published in:

Tikrit Journal of Engineering Sciences, 2025, v. 32, n. 1, p. 1, doi. 10.25130/tjes.32.1.11

By:

Ghulam, Dunia A.;
Ibrahim, Abbas F.

Publication type:

Article

Machining gray cast iron with internally cooled tools: performance, wear, and sustainability assessment.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 138, n. 5, p. 2605, doi. 10.1007/s00170-025-15610-y

By:

Peixoto, Augusto César Santos;
Fernandes, Gustavo Henrique Nazareno;
Martins, Paulo Sérgio;
Barbosa, Lucas Melo Queiroz;
França, Pedro Henrique Pires;
da Silva, Márcio Bacci;
Costa, Éder Silva;
Baldin, Vitor;
da Silva Jr., Washington Martins;
Machado, Álisson Rocha

Publication type:

Article

Machinability and Surface Morphology of TiB<sub>2</sub> Reinforced Al 7075 MMC During EDM with Cryogenic Treated Cu Electrode.

Published in:

Experimental Techniques, 2025, v. 49, n. 3, p. 509, doi. 10.1007/s40799-024-00767-0

By:

Pradhan, R. C.;
Das, D.;
Sahoo, B. P.;
Samal, C.

Publication type:

Article

The role of Kaizen in the effectiveness of Amhara metal industry and machine technology development enterprise in Ethiopia, as perceived by the employees.

Published in:

PLoS ONE, 2025, v. 20, n. 5, p. 1, doi. 10.1371/journal.pone.0322697

By:

Gebremeskel, Melaku Mengistu

Publication type:

Article

Increasing the positioning accuracy of the operative member in a three-axis metal cutting machine tool: Differential geometric model of volumetric errors.

Published in:

Measurement Techniques, 2025, v. 67, n. 11, p. 803, doi. 10.1007/s11018-025-02401-w

By:

Grigoriev, Sergey N.;
Masterenko, Dmitriy A.;
Pimushkin, Yaroslav I.;
Stebulyanin, Mikhail M.

Publication type:

Article

Surface Roughness Determination With the Help of Artificial Neural Networks as Enabler of Metal Machining Process Controlling System.

Published in:

International Journal of Computers, Communications & Control, 2025, v. 20, n. 2, p. 1, doi. 10.15837/ijccc.2025.2.7028

By:

Avram, Florin Timotei;
Țarcă, Dan-Ioan;
Noje, Dan;
Vesselenyi, Tiberiu;
Țarcă, Radu

Publication type:

Article

소프트웨어 기반 NC 기술 동향 및 발전 방향.

Published in:

Journal of the Korea Institute of Information & Communication Engineering, 2025, v. 29, n. 4, p. 548, doi. 10.6109/jkiice.2025.29.4.548

By:

한성화

Publication type:

Article

TiN–AlN nanomultilayer films for microdrilling and machining.

Published in:

Surface Engineering, 2005, v. 21, n. 4, p. 307, doi. 10.1179/174329405X55285

By:

Yao, S. H.;
Su, Y. L.;
Kao, W. H.;
Cheng, K. W.

Publication type:

Article

Surface Engineering Abstracts.

Published in:: Surface Engineering, 2004, v. 20, n. 2, p. 145, doi. 10.1179/sur.2004.20.2.145
Publication type:: Article

BOSCH REXROTH LAUNCHES 'FULLY OPEN' CNC.

Published in:: Computing & Control Engineering, 2004, v. 15, n. 1, p. 3
Publication type:: Article

Machining damage of monocrystalline silicon by specific crystallographic plane cutting of wire electrical discharge machining.

Published in:

Journal of Materials Science: Materials in Electronics, 2017, v. 28, n. 12, p. 8437, doi. 10.1007/s10854-017-6562-x

By:

Ge, Mengxing;
Liu, Zhidong;
Chen, Haoran;
Shen, Lida;
Qiu, Mingbo;
Tian, Zongjun

Publication type:

Article

Application of point tracking in the field of metal forming for machine and process characterisation and monitoring.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 11, p. 5941, doi. 10.1007/s00170-025-15513-y

By:

Martinitz, Lukas;
Bauer, Anna;
Holzer, Katja;
Volk, Wolfram;
Hartmann, Christoph

Publication type:

Article

Ultrasonic-driven adaptive control of robotic plasma arc cutting for bevel applications.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3783, doi. 10.1007/s00170-025-15331-2

By:

Mohamed, Aasim;
Loukas, Charalampos;
Vasilev, Momchil;
Sweeney, Nina;
Dobie, Gordon;
Macleod, Charles

Publication type:

Article

Investigation on the chip formation of high-speed cutting in WC-15Co tungsten carbide with PCD tool.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 5, p. 2809, doi. 10.1007/s00170-025-15302-7

By:

Xin, Yun;
Kong, Feng;
Zhao, Wei;
Shi, Weiqi;
Khan, Aqib Mashood

Publication type:

Article

Performance of cutting fluids with nanoparticles in the Ti5553 alloy turning process using high-speed cutting.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 10, p. 4623, doi. 10.1007/s00170-025-15126-5

By:

dos Santos, Rodrigo Gonçalves;
de Paiva Jr., José Mário Fernandes;
Torres, Ricardo Diego;
Amorim, Fred Lacerda

Publication type:

Article

Mathematical model of the heat generated and the mass eroded in the EDM process.

Published in:

2025

By:

Lira, Valdemir Martins;
Antunes, Renato Altobelli;
Arantes, Jeverson Teodoro

Publication type:

Literature Review

Cutting of rolled metal with a stress concentrator marked by the elastic deformation of the press.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3791, doi. 10.1007/s00170-025-15043-7

By:

Karnaukh, Sergii G.;
Markov, Oleg E.;
Aliiev, Igramotdin S.;
Stankov, Vitalii U.

Publication type:

Article

Study of cutting force predictability, signal complexity of different end milling CWE stages with different modelling methods.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1163, doi. 10.1007/s00170-024-14877-x

By:

Xie, Hui;
Li, Guangxian;
Longstaff, Andrew P.;
Fletcher, Simon;
Ding, Songlin;
Pan, Wencheng

Publication type:

Article

Electrical discharge machining of hybrid metal matrix composites: a comprehensive review.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 2, p. 447, doi. 10.1007/s00170-024-14805-z

By:

Sah, Satesh;
Sardar, Santanu;
Guha, Ashim;
Das, Debdulal

Publication type:

Article

Implications of stress concentrators and work hardening in flat tensile samples subjected to milling and abrasive water jet machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 1, p. 343, doi. 10.1007/s00170-024-14118-1

By:

Buglioni, Luciano;
Krahmer, Daniel Martínez;
Sánchez Egea, Antonio;
Simoncelli, Alejandro

Publication type:

Article

Sustainable green cutting fluid for interpreting optimization of process variables while machining on various CNC manufacturing systems—an experimental approach for exploring.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 1, p. 329, doi. 10.1007/s00170-024-14028-2

By:

Ramena, Durga Venkata Prasad;
Vikram, Kothapalli Arun;
Chebolu, Rohinikumar;
Barmavatu, Praveen;
Sikarwar, Vineet Singh;
Giri, Jayant;
Sathish, Thanakondi

Publication type:

Article

Investigating the tribological properties under severe contact conditions using an extreme pressure tribo-device.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 9/10, p. 4731, doi. 10.1007/s00170-024-14787-y

By:

Bejjani, Roland;
Al Fleety, Al Hussein

Publication type:

Article

Optimization of machining efficiency and side quality in irregular sheet metal parts milling based on improved multi-objective seagull optimization algorithm.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 5/6, p. 2755, doi. 10.1007/s00170-024-14540-5

By:

Chen, Xiaohui;
Shen, Dezhan;
Ou, Chengyi;
Ma, Junyan;
Lu, Juan;
Liao, Xiaoping

Publication type:

Article

Large-scale investigation of dry orthogonal cutting experiments Ti6Al4V and Ck45.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 5/6, p. 2871, doi. 10.1007/s00170-024-14597-2

By:

Klippel, Hagen;
Süssmaier, Stefan;
Zhang, Nanyuan;
Kuffa, Michal;
Wegener, Konrad

Publication type:

Article

New plunge milling cutter and two-dimensional cavity process based on dislocation chip-separation principle.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 3/4, p. 1551, doi. 10.1007/s00170-024-14609-1

By:

Guo, Minglong;
Wang, Zhibin;
Wei, Zhaocheng;
Zhang, Zhihong;
He, Shaolin

Publication type:

Article

Positioning error compensation method for industrial robots based on stacked ensemble learning.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 1/2, p. 267, doi. 10.1007/s00170-024-14453-3

By:

Chen, Qizhi;
Zhang, Chengrui;
Ma, Wei;
Yang, Chen

Publication type:

Article

Configuration of tool wear and its mechanism in sustainable machining of titanium alloys with energy signals.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 134, n. 7/8, p. 3561, doi. 10.1007/s00170-024-14336-7

By:

Vashishtha, Govind;
Chauhan, Sumika;
Gupta, Munish Kumar;
Korkmaz, Mehmet Erdi;
Ross, Nimel Sworna;
Zimroz, Radoslaw;
Krolczyk, Grzegorz M.

Publication type:

Article

Study on wear mechanism of milling cutter and hole-making quality in ball helical milling process.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 134, n. 5/6, p. 2417, doi. 10.1007/s00170-024-14272-6

By:

Wang, Haiyan;
Lu, Yao;
Yu, Wanchun;
Tian, Gan

Publication type:

Article

Eco-friendly grinding: exploring the potential of volatile corrosion inhibitors.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 134, n. 1/2, p. 795, doi. 10.1007/s00170-024-14167-6

By:

Moretti, Guilherme Bressan;
Machado, Felipe de Carvalho;
Winckler, Leonardo;
Ribeiro, Fernando Sabino Fonteque;
Talon, Anthony Gaspar;
Sanchez, Luiz Eduardo de Angelo;
Bianchi, Eduardo Carlos;
Lopes, José Claudio

Publication type:

Article

Vacuum-oxygen-low recycling process of aluminium composites manufactured from steel machining chips.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 9/10, p. 5277, doi. 10.1007/s00170-024-13354-9

By:

Mwema, Fredrick M.;
Wambua, Job M.;
Bodunrin, Michael O.;
Jen, Tien-Chien;
Akinlabi, Esther T.

Publication type:

Article

Correction to: Closed-loop quality control system for laser chemical machining in metal micro-production.

Published in:

2024

By:

Zhang, P.;
von Freyberg, A.;
Fischer, A.

Publication type:

Correction Notice

The study of different flow fields at the corner during the electrochemical machining of internal gear.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 3811, doi. 10.1007/s00170-024-13257-9

By:

Li, Junfei;
Tan, Shuaizhe;
Liu, Guixian;
Su, Guokang;
Zhang, Yongjun

Publication type:

Article

Machining mechanism of metal glass cutting based on ultrasonic vibration tool path.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 5/6, p. 2967, doi. 10.1007/s00170-023-12818-8

By:

Gu, Guquan;
Wu, Shujing;
Wang, Dazhong;
Zhang, Buxin;
Li, Changhe;
Liang, Zhiqiang

Publication type:

Article

Study on the influence of ultrasonic-assisted cutting on the surface quality of CFRP.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 5/6, p. 1989, doi. 10.1007/s00170-022-10524-5

By:

Wang, Xiaobo;
Song, Chaosheng;
Tong, Jinglin;
Li, Lulu;
Wu, Mingqiang;
Zhao, Bo

Publication type:

Article

Biodegradable cutting fluids for sustainable manufacturing: a review of machining mechanisms and performance.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 3/4, p. 955, doi. 10.1007/s00170-024-13132-7

By:

Gan, Chin Ket;
Liew, Pay Jun;
Leong, Kin Yuen;
Yan, Jiwang

Publication type:

Article

A review of sustainable hybrid lubrication (Cryo-MQL) techniques in machining processes.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 1, p. 151, doi. 10.1007/s00170-024-13135-4

By:

Yaqoob, Saima;
Ghani, Jaharah A.;
Juri, Afifah Z.;
Muhamad, Shalina Sheik;
Haron, Che Hassan Che;
Jouini, Nabil

Publication type:

Article

Evaluation of constitutive models used in orthogonal cutting simulation based on coupled Eulerian–Lagrangian formulation.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 1, p. 183, doi. 10.1007/s00170-024-13104-x

By:

Zhu, Baoyi;
Xiong, Liangshan;
Chen, Yuhai

Publication type:

Article

A comparative study of the thermal and mechanical cutting influence on the cut-edge hardness of structural steels S355 and S1100.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5951, doi. 10.1007/s00170-023-12937-2

By:

Diekhoff, Paul;
Sun, Jiamin;
Nitschke-Pagel, Thomas;
Dilger, Klaus

Publication type:

Article

Machining of titanium metal matrix composites: a short review.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 3/4, p. 1003, doi. 10.1007/s00170-023-12820-0

By:

Chen, Tao;
Zhao, Biao;
Lin, Chunchao;
Ding, Wenfeng;
Guo, Guoqiang

Publication type:

Article

The formation mechanism of discontinuously segmented chip in high-speed cutting of Ti-6Al-4 V.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 3/4, p. 1477, doi. 10.1007/s00170-023-12817-9

By:

Ye, Guigen;
Li, Xinjian;
Zhang, Peng;
Xue, Shifeng;
Zhang, Yi;
Huang, Xiaoguang

Publication type:

Article

A comprehensive review of studying the influence of laser cutting parameters on surface and kerf quality of metals.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 3/4, p. 1039, doi. 10.1007/s00170-023-12768-1

By:

Alsaadawy, Muhammad;
Dewidar, Montasser;
Said, Ahmed;
Maher, Ibrahem;
Shehabeldeen, Taher A.

Publication type:

Article

Selecting a cutting method for workpieces before stamping using synergetic fracture criteria and a deformability limit determination technique for separating processes.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 11/12, p. 5447, doi. 10.1007/s00170-023-12627-z

By:

Karnaukh, Sergii G.;
Markov, Oleg E.;
Shapoval, Alexander A.;
Hrudkina, Natalia S.

Publication type:

Article

Adiabatic shear behavior and cutting force prediction modeling of FV520B steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 9/10, p. 4239, doi. 10.1007/s00170-023-12570-z

By:

Yang, Longyun;
Duan, Chunzheng;
Wang, Yang;
Wei, Zhaocheng;
Wang, Minjie

Publication type:

Article

AWJ machining of high-volume fraction SiC<sub>p</sub>/Al composites.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 1/2, p. 941, doi. 10.1007/s00170-023-12229-9

By:

Liu, Xin;
Yao, Longxu;
Li, Hui;
Wang, Bing;
Zhao, Changxi;
Zheng, Liyan;
Liao, Yinghao;
Wang, Dian

Publication type:

Article

Evaluation of cutting edge K-form factor in milling of 316L stainless steel: a study based on FEM.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 11/12, p. 5223, doi. 10.1007/s00170-023-12098-2

By:

Lv, Dejin;
Yu, Xin;
Wang, Yongguo

Publication type:

Article

Reliability analysis of regenerative chatter stability in turning tool systems by modified control variate method.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 9/10, p. 4535, doi. 10.1007/s00170-023-12228-w

By:

En, Xi-Nong;
Zhang, Yi-Min;
Huang, Xian-Zhen

Publication type:

Article

A GND simulation model for micro-deformation mechanism analyses in high-speed cutting Inconel718.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 7/8, p. 2931, doi. 10.1007/s00170-023-12026-4

By:

Fan, Yihang;
Wang, Bing;
Hao, Zhaopeng;
Cui, Gangwei

Publication type:

Article

Modified shaving die for shaving thick sheet metal.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2469, doi. 10.1007/s00170-023-12075-9

By:

Sontamino, Arkarapon;
Thipprakmas, Sutasn

Publication type:

Article

A 3D coupled thermo-mechanical model of laser-assisted machining of Ti-6Al-4V: forces, temperature, and tool wear analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2739, doi. 10.1007/s00170-023-11978-x

By:

Divse, Vishwas;
Dubey, Amit;
Thomas, Vimal;
Joshi, Suhas;
Marla, Deepak

Publication type:

Article

Investigations into the effect of cutting speed on nano-cutting of metallic glass by using molecular dynamics simulation analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 11/12, p. 5253, doi. 10.1007/s00170-023-11884-2

By:

Liu, Yin;
Cui, Xiaoqing;
Sun, Xingwei;
Yang, Heran;
Dong, Zhixu;
Gong, Yadong;
Yuan, Zewei;
Pan, Fei;
Zhao, Hongxun;
Liu, Weijun

Publication type:

Article