Works matching Calorimeters

Results: 5000

Compare the flammability of two extruded polystyrene foams with micro-scale combustion calorimeter and cone calorimeter tests.

Published in:

Journal of Thermal Analysis & Calorimetry, 2017, v. 127, n. 3, p. 2359, doi. 10.1007/s10973-016-5754-6

By:

Xu, Qiang;
Jin, Cong;
Jiang, Yong

Publication type:

Article

Combined Thermal Runaway Investigation of Coin Cells with an Accelerating Rate Calorimeter and a Tian-Calvet Calorimeter.

Published in:

Batteries, 2022, v. 8, n. 2, p. 15, doi. 10.3390/batteries8020015

By:

Zhao, Wenjiao;
Rohde, Magnus;
Mohsin, Ijaz Ul;
Ziebert, Carlos;
Du, Yong;
Seifert, Hans J.

Publication type:

Article

Accelerating rate calorimeter studies of water-induced thermal hazards of fireworks tip mixture.

Published in:

Journal of Thermal Analysis & Calorimetry, 2013, v. 112, n. 3, p. 1335, doi. 10.1007/s10973-012-2716-5

By:

Sridhar, Vethathiri;
Surianarayanan, Mahadevan;
Sivapirakasam, Suthangathan;
Mandal, Asit

Publication type:

Article

Effects of the type of calorimeter and the use of plasticizers and hydrophobizers on the measured hydration heat development of FGD gypsum.

Published in:

Journal of Thermal Analysis & Calorimetry, 2008, v. 91, n. 3, p. 791, doi. 10.1007/s10973-007-8709-0

By:

Tydlitát, V.;
Tesárek, P.;
Černý, R.

Publication type:

Article

Towards classification of calorimeters.

Published in:

Journal of Thermal Analysis & Calorimetry, 2008, v. 91, n. 2, p. 663, doi. 10.1007/s10973-007-8431-y

By:

Zielenkiewicz, W.

Publication type:

Article

The rapid mass calorimeter: A route to high throughput fire testing.

Published in:

Fire & Materials, 2017, v. 41, n. 7, p. 834, doi. 10.1002/fam.2420

By:

Rabe, Sebastian;
Schartel, Bernhard

Publication type:

Article

Effects of variations in incident heat flux when using cone calorimeter test data for prediction of full-scale heat release rates of polyurethane foam.

Published in:

Fire & Materials, 2016, v. 40, n. 1, p. 89, doi. 10.1002/fam.2271

By:

Robson, Luke D.;
Torvi, David A.;
Obach, Matthew R.;
Weckman, Elizabeth J.

Publication type:

Article

Diagnostics of Powerful Electron Beams Using Total‐Absorption Calorimeters.

Published in:

Journal of Applied Mechanics & Technical Physics, 2003, v. 44, n. 6, p. 753, doi. 10.1023/A:1026242500472

By:

Stepovik, A. P.;
Khmel'nitskii, D. V.

Publication type:

Article

Performance and Calibration of the ATLAS Tile Calorimeter.

Published in:

Instruments (2410-390X), 2022, v. 6, n. 3, p. N.PAG, doi. 10.3390/instruments6030025

By:

Davidek, Tomas

Publication type:

Article

Evaluating Models for Predicting Full-Scale Fire Behaviour of Polyurethane Foam Using Cone Calorimeter Data.

Published in:

Fire Technology, 2014, v. 50, n. 3, p. 693, doi. 10.1007/s10694-011-0239-4

By:

Ezinwa, John;
Robson, Luke;
Obach, Matthew;
Torvi, David;
Weckman, Elizabeth

Publication type:

Article

Preliminary conceptual design about the CEPC calorimeters.

Published in:

International Journal of Modern Physics A: Particles & Fields; Gravitation; Cosmology; Nuclear Physics, 2016, v. 31, n. 33, p. -1, doi. 10.1142/S0217751X16440267

By:

Yang, Haijun

Publication type:

Article

Influence of physical properties on polymer flammability in the cone calorimeter.

Published in:

Polymers for Advanced Technologies, 2011, v. 22, n. 7, p. 1100, doi. 10.1002/pat.1943

By:

Patel, Parina;
Hull, T. Richard;
Stec, Anna A.;
Lyon, Richard E.

Publication type:

Article

Combining cone calorimeter and PCFC to determine the mode of action of flame-retardant additives.

Published in:

Polymers for Advanced Technologies, 2011, v. 22, n. 7, p. 1091, doi. 10.1002/pat.1989

By:

Sonnier, R.;
Ferry, L.;
Longuet, C.;
Laoutid, F.;
Friederich, B.;
Laachachi, A.;
Lopez‐Cuesta, J‐M.

Publication type:

Article

Analysis of the Calibration Constant of a Heat Conduction Calorimeter.

Published in:

Instrumentation Science & Technology, 2006, v. 34, n. 4, p. 379, doi. 10.1080/10739140600642525

By:

Heng, Zhang;
Yuwen, Liu;
Cunxin, Wang

Publication type:

Article

Thermo-fluid-coupled analysis and simulation of calorimeter of Experimental Advanced Superconducting Tokamak neutral beam injection system on the thermal inertia principle.

Published in:

Advances in Mechanical Engineering (Sage Publications Inc.), 2017, v. 9, n. 4, p. 1, doi. 10.1177/1687814017699093

By:

Tao, Ling;
Hu, Chundong;
Xie, Yuanlai

Publication type:

Article

THE MELT/SHRINK EFFECT OF LOW DENSITY THERMOPLASTICS INSULATES: Cone Calorimeter Tests.

Published in:

Thermal Science, 2017, v. 21, n. 5, p. 2177, doi. 10.2298/TSCI150304058X

By:

Qiang XU;
Cong JIN;
Jordan HRISTOV;
Greg GRIFFIN;
Yong JIANG

Publication type:

Article

ELECTROMAGNETIC CALORIMETER FOR SHMS SPECTROMETER AT JLAB HALL C.

Published in:

Electronic Journal of Natural Sciences, 2010, v. 14, n. 1, p. 22

By:

Mkrtchyan, H. G.;
V. Tadevosyan;
A. R. Asaturyan;
A. H. Mkrtchyan

Publication type:

Article

Deriving blower capacity and hood design factors considering the fluid and thermal characteristics of a large-scale calorimeter.

Published in:

Journal of Thermal Analysis & Calorimetry, 2024, v. 149, n. 14, p. 7393, doi. 10.1007/s10973-024-13291-5

By:

Park, Jung Wook;
Kim, Sung Chan;
Kim, Jung Yong;
You, Woo Jun

Publication type:

Article

A review on cone calorimeter for assessment of flame-retarded polymer composites.

Published in:

Journal of Thermal Analysis & Calorimetry, 2022, v. 147, n. 19, p. 10209, doi. 10.1007/s10973-022-11279-7

By:

Quan, Yufeng;
Zhang, Zhuoran;
Tanchak, Rachel N.;
Wang, Qingsheng

Publication type:

Article

Precise temperature controlling algorithm for metrological adiabatic calorimeters based on proportional-integration (α) thermal energy.

Published in:

Journal of Thermal Analysis & Calorimetry, 2022, v. 147, n. 5, p. 3721, doi. 10.1007/s10973-021-10806-2

By:

El Matarawy, A.;
El-Dien, Eman Mohy

Publication type:

Article

The performance evaluation of a low-temperature adiabatic calorimeter with melting parameters and purity measurement of the benzene.

Published in:

Journal of Thermal Analysis & Calorimetry, 2022, v. 147, n. 2, p. 1633, doi. 10.1007/s10973-020-10511-6

By:

Yao, Kai;
Liu, Yunchuan;
Wang, Xuerong;
Zhou, Yanping;
Wang, Qianqian;
Ma, Yandong;
Meng, Xiangyan;
Sun, Yan;
Zheng, Suping

Publication type:

Article

A novel understanding of combustion behavior of coals by cone calorimeter.

Published in:

Journal of Thermal Analysis & Calorimetry, 2021, v. 143, n. 1, p. 139, doi. 10.1007/s10973-019-09250-0

By:

Liu, Chuan;
Fu, Libi;
Yang, Jian;
Zhang, Su;
Shi, Yongqian;
Yang, Fuqiang;
Yang, Ye;
Zhuang, Yanzhen;
Ye, Yating;
Wang, Liancong

Publication type:

Article

Assessing the fire risk of electrical cables using a cone calorimeter.

Published in:

Journal of Thermal Analysis & Calorimetry, 2019, v. 135, n. 6, p. 3069, doi. 10.1007/s10973-018-7556-5

By:

Martinka, Jozef;
Rantuch, Peter;
Sulová, Janka;
Martinka, Filip

Publication type:

Article

Discuss the heat release capacity of polymer derived from microscale combustion calorimeter.

Published in:

Journal of Thermal Analysis & Calorimetry, 2018, v. 133, n. 1, p. 649, doi. 10.1007/s10973-017-6866-3

By:

Xu, Qiang;
Jin, Cong;
Majlingova, Andrea;
Restas, Agoston

Publication type:

Article

Determination of solid/liquid fraction of three aluminium binary alloys using a new single-pan scanning calorimeter.

Published in:

Journal of Thermal Analysis & Calorimetry, 2017, v. 130, n. 3, p. 1847, doi. 10.1007/s10973-017-6663-z

By:

Savas, Sinan;
Dong, Hongbiao

Publication type:

Article

Experimental review of oxygen content at mixing layer in cone calorimeter.

Published in:

Journal of Thermal Analysis & Calorimetry, 2017, v. 129, n. 2, p. 639, doi. 10.1007/s10973-017-6290-8

By:

Alonso, Alain;
Puente, Eduardo;
Lázaro, Pedro;
Lázaro, David;
Alvear, Daniel

Publication type:

Article

An isoperibolic combustion calorimeter developed to measure the enthalpy of combustion of organic compounds.

Published in:

Journal of Thermal Analysis & Calorimetry, 2017, v. 127, n. 3, p. 2307, doi. 10.1007/s10973-016-5758-2

By:

Mentado-Morales, Juan;
Hernández-Sánchez, Elizabeth;
Regalado-Méndez, Alejandro;
Peralta-Reyes, Ever

Publication type:

Article

Evaluation of the hazard of heat generation by oxidation of materials using a differential-type adiabatic calorimeter.

Published in:

Journal of Thermal Analysis & Calorimetry, 2016, v. 123, n. 3, p. 1851, doi. 10.1007/s10973-015-4954-9

By:

Sato, Yoshihiko

Publication type:

Article

Design and functionality of a high-sensitivity bomb calorimeter specialized for reactive metallic foils.

Published in:

Journal of Thermal Analysis & Calorimetry, 2015, v. 122, n. 2, p. 787, doi. 10.1007/s10973-015-4805-8

By:

Overdeep, Kyle;
Weihs, Timothy

Publication type:

Article

Numerical simulation of wood crib fire behavior in a confined space using cone calorimeter data.

Published in:

Journal of Thermal Analysis & Calorimetry, 2015, v. 119, n. 3, p. 2291, doi. 10.1007/s10973-014-4291-4

By:

Zhang, Shaogang;
Ni, Xiaomin;
Zhao, Mei;
Feng, Junjie;
Zhang, Ruifang

Publication type:

Article

Design and construction of an quasi-adiabatic dissolution calorimeter with a novel dosing apparatus and a low heat capacity.

Published in:

Journal of Thermal Analysis & Calorimetry, 2014, v. 117, n. 2, p. 901, doi. 10.1007/s10973-014-3829-9

By:

Horvat, Gordan;
Požar, Josip;
Dojnović, Zvonimir;
Grgec, Dragutin;
Blažeka, Saša

Publication type:

Article

Treated and untreated foam core particleboards with intumescent veneer: Comparative analysis using a cone calorimeter.

Published in:

Journal of Thermal Analysis & Calorimetry, 2013, v. 114, n. 3, p. 979, doi. 10.1007/s10973-013-3331-9

By:

Dietenberger, Mark A.;
Shalbafan, Ali;
Welling, Johannes;
Boardman, Charles

Publication type:

Article

Using cone calorimeter data for the prediction of upward flame spread rate.

Published in:

Journal of Thermal Analysis & Calorimetry, 2013, v. 112, n. 3, p. 1601, doi. 10.1007/s10973-012-2735-2

By:

Tsai, Kuang-Chung

Publication type:

Article

An isothermal heat flow calorimeter for large-volume applications.

Published in:

Journal of Thermal Analysis & Calorimetry, 2012, v. 110, n. 2, p. 1021, doi. 10.1007/s10973-011-1907-9

By:

Tydlitát, Vratislav;
Zákoutský, Jan;
Černý, Robert

Publication type:

Article

Estimating the fire behavior of wood flooring using a cone calorimeter.

Published in:

Journal of Thermal Analysis & Calorimetry, 2012, v. 110, n. 2, p. 677, doi. 10.1007/s10973-011-1902-1

By:

Kim, Junhyun;
Lee, Jeong-Hun;
Kim, Sumin

Publication type:

Article

Adsorption micro calorimeter.

Published in:

Journal of Thermal Analysis & Calorimetry, 2009, v. 97, n. 2, p. 711, doi. 10.1007/s10973-009-0345-4

By:

García-Cuello, V.;
Moreno-Pirajan, J. C.;
Giraldo-Gutiérrez, L.;
Sapag, K.;
Zgrablich, G.

Publication type:

Article

New French reference calorimeter for gas calorific value measurements.

Published in:

Journal of Thermal Analysis & Calorimetry, 2009, v. 97, n. 2, p. 673, doi. 10.1007/s10973-008-9701-z

By:

Haloua, F.;
Hay, B.;
Filtz, J. -R.

Publication type:

Article

Numerical model of a large-scale oxygen consumption fire calorimeter.

Published in:

Journal of Thermal Analysis & Calorimetry, 2008, v. 93, n. 3, p. 1013, doi. 10.1007/s10973-007-8696-1

By:

Kim, S. C.;
Bundy, M.

Publication type:

Article

Introduction of a calibration-free reaction calorimeter that combines the benefits of DSCS and reaction calorimeters.

Published in:

Journal of Thermal Analysis & Calorimetry, 2008, v. 93, n. 1, p. 219, doi. 10.1007/s10973-007-8925-7

By:

Nilsson, H.;
Hess, U.

Publication type:

Article

A versatile and high-precision solution—reaction isoperibol calorimeter.

Published in:

Journal of Thermal Analysis & Calorimetry, 2008, v. 91, n. 2, p. 659, doi. 10.1007/s10973-007-7613-y

By:

Vargas, E. F.;
Moreno, J. C.;
Forero, J.;
Parra, D. F.

Publication type:

Article

Injection effect on the sensitivity in an isothermal titration calorimeter.

Published in:

Journal of Thermal Analysis & Calorimetry, 2006, v. 85, n. 2, p. 477, doi. 10.1007/s10973-005-7182-x

By:

de Rivera, M. Rodríguez;
Socorro, F.

Publication type:

Article

Use of the modified controlled atmosphere cone calorimeter for the assessment of fire effluents generated by burning wood under different ventilation conditions.

Published in:

Fire & Materials, 2022, v. 46, n. 6, p. 943, doi. 10.1002/fam.3042

By:

Knez, F.;
Uršič, M.;
Knez, N.;
Peeters, K.;
Franko, M.;
Zidar, P.

Publication type:

Article

The effect of oxygen concentration on selected industrial products in the open controlled atmosphere cone calorimeter.

Published in:

Fire & Materials, 2022, v. 46, n. 4, p. 617, doi. 10.1002/fam.3006

By:

Barton, John;
Rios, Oriol;
Runefors, Marcus;
van Hees, Patrick

Publication type:

Article

Assessing the combustibility of claddings: A comparative study of the modified cone calorimeter method and cylindrical furnace test.

Published in:

Fire & Materials, 2022, v. 46, n. 2, p. 450, doi. 10.1002/fam.2981

By:

Nguyen, Kate;
Kim, Nam Kyeun;
Bhattacharyya, Debes;
Mouritz, Adrian

Publication type:

Article

Emulation of condensed fuel flames with gaseous fuels supplied through a porous copper calorimeter.

Published in:

Fire & Materials, 2020, v. 44, n. 7, p. 935, doi. 10.1002/fam.2896

By:

Auth, Eric;
Quintiere, James G.;
Sunderland, Peter B.

Publication type:

Article

An exercise in obtaining flame radiation fraction from the cone calorimeter.

Published in:

Fire & Materials, 2016, v. 40, n. 6, p. 861, doi. 10.1002/fam.2350

By:

Quintiere, James G.;
Lyon, Richard E.;
Crowley, Sean B.

Publication type:

Article

Apparatus for the vertical orientation cone calorimeter testing of flexible polyurethane foams.

Published in:

Fire & Materials, 2016, v. 40, n. 1, p. 158, doi. 10.1002/fam.2277

By:

Galaska, Mary L.;
Morgan, Alexander B.;
Schenck, Kathleen A.;
Stalter, John G.

Publication type:

Article

Pilot spark energy in the cone calorimeter: a source of measurement uncertainties.

Published in:

Fire & Materials, 2014, v. 38, n. 7, p. 760, doi. 10.1002/fam.2213

By:

Ochoterena, Raúl;
Försth, Michael

Publication type:

Article

Thermal and chemical analysis of flammability and combustibility of fir wood in cone calorimeter coupled to FTIR apparatus.

Published in:

Fire & Materials, 2014, v. 38, n. 3, p. 418, doi. 10.1002/fam.2192

By:

Batiot, Benjamin;
Luche, Jocelyn;
Rogaume, Thomas

Publication type:

Article

The calculation of the heat release rate by oxygen consumption in a controlled-atmosphere cone calorimeter.

Published in:

Fire & Materials, 2014, v. 38, n. 2, p. 204, doi. 10.1002/fam.2175

By:

Werrel, Martin;
Deubel, Jan H.;
Krüger, Simone;
Hofmann, Anja;
Krause, Ulrich

Publication type:

Article