Works matching IS 00222461 AND DT 2008 AND VI 43 AND IP 13

Results: 38

New type of low-dielectric composites based on o-cresol novolac epoxy resin and mesoporous silicas: fabrication and performances.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4455, doi. 10.1007/s10853-008-2655-5

By:

Lin, Jingjing;
Wang, Xiaodong

Publication type:

Article

Adiabatic shear failure of high reinforcement content aluminum matrix composites.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4483, doi. 10.1007/s10853-008-2652-8

By:

Wu, G.;
Zhu, D.;
Chen, G.;
Jiang, L.;
Zhang, Q.

Publication type:

Article

Studies on ac response of zinc oxide pellets.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4534, doi. 10.1007/s10853-008-2642-x

By:

Sahay, P.;
Tewari, S.;
Nath, R.;
Jha, S.;
Shamsuddin, M.

Publication type:

Article

Tensile strength improvement of an Mg–12Gd–3Y (wt%) alloy processed by hot extrusion and free forging.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4493, doi. 10.1007/s10853-008-2650-x

By:

Lin, Li;
Chen, Lijia;
Liu, Zheng

Publication type:

Article

Preparation of pH-responsive silver nanoparticles by RAFT polymerization.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4625, doi. 10.1007/s10853-008-2671-5

By:

Sun, Youyi;
Liu, Yaqing;
Zhao, Guizhe;
Zhou, Xing;
Gao, Jiangang;
Zhang, Qijin

Publication type:

Article

Effects of fiber surface treatments on mechanical properties of epoxy composites reinforced with glass fabric.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4666, doi. 10.1007/s10853-008-2679-x

By:

Sever, Kutlay;
Sarikanat, Mehmet;
Seki, Yoldas;
Cecen, Volkan;
Tavman, Ismail

Publication type:

Article

Fabrication of short carbon fiber preforms coated with pyrocarbon/SiC for liquid metal infiltration.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4618, doi. 10.1007/s10853-008-2664-4

By:

Ouyang, Haibo;
Li, Hejun;
Qi, Lehua;
Li, Zhengjia;
Fang, Ting;
Wei, Jianfeng

Publication type:

Article

Electrical conductivity enhancement of a polymer using butyl glycidyl ether (BGE)–lithium hexafluorophosphate (LiPF6) complex.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4607, doi. 10.1007/s10853-008-2677-z

By:

Jana, Soumen;
Zhong, Wei-Hong

Publication type:

Article

Assessment of θ-projection concept and fracture cavitation.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4592, doi. 10.1007/s10853-008-2666-2

By:

Baldan, A.;
Tascioglu, E.

Publication type:

Article

Marangoni convection and weld shape variations in He–CO2 shielded gas tungsten arc welding on SUS304 stainless steel.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4583, doi. 10.1007/s10853-008-2681-3

By:

Lu, Shanping;
Fujii, Hidetoshi;
Nogi, Kiyoshi

Publication type:

Article

Tribological properties of MoS2 and carbon fiber reinforced polyimide composites.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4567, doi. 10.1007/s10853-008-2699-6

By:

Zhang, X.;
Pei, X.;
Wang, Q.

Publication type:

Article

Structural and textural characterization of a novel spatially coherent crystalline nanocomposite obtained from a melt of KBr, RbCl, RbBr, KI, RbI, and KCl salts.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4573, doi. 10.1007/s10853-008-2686-y

By:

Cordero-Borboa, A.;
Mijangos, R.;
Flores-Morales, L.

Publication type:

Article

The effect of molybdenum on the microstructure and creep behavior of Ti–24Al–17Nb– xMo alloys and Ti–24Al–17Nb– xMo SiC-fiber composites.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4411, doi. 10.1007/s10853-008-2582-5

By:

Quast, J.;
Boehlert, C.

Publication type:

Article

Texture simulation of aluminum rod during equal channel angular pressing.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4561, doi. 10.1007/s10853-008-2638-6

By:

Hoseini, Majid;
Meratian, Mahmood;
Li, Hualong;
Szpunar, Jerzy

Publication type:

Article

High energy impact techniques application for surface grain refinement in AZ91D magnesium alloy.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4658, doi. 10.1007/s10853-008-2668-0

By:

Hou, Li-feng;
Wei, Ying-hui;
Liu, Bao-sheng;
Xu, Bing-she

Publication type:

Article

Effect of homogenization on recrystallization in a twin-roll cast Al–Fe–Si alloy.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4652, doi. 10.1007/s10853-008-2663-5

By:

Birol, Yücel

Publication type:

Article

Synthesis of eucryptite spheres.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4644, doi. 10.1007/s10853-008-2658-2

By:

Kenfack, Flaurance;
Vieth, Siegfried

Publication type:

Article

Photographing impact of plasma-sprayed particles on rough substrates.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4631, doi. 10.1007/s10853-008-2669-z

By:

McDonald, André;
Chandra, Sanjeev;
Moreau, Christian

Publication type:

Article

Effect of UV exposure on the microstructure and mechanical properties of long fiber thermoplastic (LFT) composites.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4423, doi. 10.1007/s10853-007-2444-6

By:

Goel, A.;
Chawla, K.;
Vaidya, U.;
Koopman, M.;
Dean, D.

Publication type:

Article

Polyacrylonitrile/vapor grown carbon nanofiber composite films.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4363, doi. 10.1007/s10853-008-2556-7

By:

Guo, Huina;
Rasheed, Asif;
Minus, Marilyn;
Kumar, Satish

Publication type:

Article

Characterization of long fiber thermoplastic/metal laminates.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4391, doi. 10.1007/s10853-007-2437-5

By:

Kulkarni, R.;
Chawla, K.;
Vaidya, U.;
Koopman, M.;
Eberhardt, A.

Publication type:

Article

Polymer-bioceramic composites for tissue engineering scaffolds.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4433, doi. 10.1007/s10853-008-2552-y

By:

Mohamad Yunos, Darmawati;
Bretcanu, Oana;
Boccaccini, Aldo

Publication type:

Article

Energy dissipation in carbon nanotube composites: a review.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4370, doi. 10.1007/s10853-007-2440-x

By:

Suhr, Jonghwan;
Koratkar, Nikhil

Publication type:

Article

Damage evolution and energy absorption of E-glass/polypropylene laminates subjected to ballistic impact.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4399, doi. 10.1007/s10853-008-2595-0

By:

Deka, L.;
Bartus, S.;
Vaidya, U.

Publication type:

Article

Indentation mechanics and fracture behavior of metal/ceramic nanolaminate composites.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4383, doi. 10.1007/s10853-008-2450-3

By:

Chawla, N.;
Singh, D.;
Shen, Y.-L.;
Tang, G.;
Chawla, K.

Publication type:

Article

Effect of the processing method on the mechanical properties and morphology of compatibilized PA6/LDPE blends.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4443, doi. 10.1007/s10853-008-2661-7

By:

Agrawal, Pankaj;
Araújo, Edcleide;
Mélo, Tomás

Publication type:

Article

Preparation of micro-spherical ZrO2: Pr3+ phosphors by ultrasonic assisted CVS.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4527, doi. 10.1007/s10853-008-2644-8

By:

Ramos-Brito, Francisco;
García-Hipólito, Manuel;
Alejo-Armenta, Castulo;
Camarillo, Enrique;
Hernández, José;
Murrieta, Héctor;
Falcony, Ciro

Publication type:

Article

Production and mechanical properties of metallic glass-reinforced Al-based metal matrix composites.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4518, doi. 10.1007/s10853-008-2647-5

By:

Scudino, S.;
Surreddi, K.;
Sager, S.;
Sakaliyska, M.;
Kim, J.;
Löser, W.;
Eckert, J.

Publication type:

Article

Determination of Young’s moduli of 3C (110) single-crystal and (111) polycrystalline silicon carbide from operating frequencies.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4512, doi. 10.1007/s10853-008-2648-4

By:

Chang, Wenteng;
Zorman, Christian

Publication type:

Article

SiOC ceramic foams synthesized from electron beam irradiated methylsilicone resin.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4466, doi. 10.1007/s10853-008-2654-6

By:

Rocha, R.;
Moura, E.;
Bressiani, A.;
Bressiani, J.

Publication type:

Article

The effect of graphite addition on the mechanical and tribological properties of pitch-based granular carbon composites.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4541, doi. 10.1007/s10853-008-2641-y

By:

Méndez, A.;
Santamaría, R.;
Granda, M.;
Menéndez, R.

Publication type:

Article

Retardation of grain growth and cavitation by an electric field during superplastic deformation of ultrafine-grained 3Y-TZP at 1,450–1,600 °C.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4475, doi. 10.1007/s10853-008-2653-7

By:

Yang, Di;
Conrad, Hans

Publication type:

Article

High-cycle fatigue of hybrid carbon nanotube/glass fiber/polymer composites.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4487, doi. 10.1007/s10853-008-2651-9

By:

Grimmer, Christopher;
Dharan, C.

Publication type:

Article

Effect of the addition of t-ZrO2 on the material properties of β-TCP/PCL composites.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4450, doi. 10.1007/s10853-008-2656-4

By:

Song, Ho-Yeon;
Quang, Do;
Min, Young-Ki;
Lee, Byong-Taek

Publication type:

Article

Preface to special section on composite materials.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4353, doi. 10.1007/s10853-008-2608-z

By:

Chawla, N.;
Boehlert, C.;
Chawla, K.;
Lara-Curzio, E.

Publication type:

Article

Solid-state spun fibers and yarns from 1-mm long carbon nanotube forests synthesized by water-assisted chemical vapor deposition.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4356, doi. 10.1007/s10853-008-2558-5

By:

Zhang, Shanju;
Zhu, Lingbo;
Minus, Marilyn;
Chae, Han;
Jagannathan, Sudhakar;
Wong, Ching-Ping;
Kowalik, Janusz;
Roberson, Luke;
Kumar, Satish

Publication type:

Article

Effect of extrusion ratio on microstructure and mechanical properties of microwave-sintered magnesium and Mg/Y2O3 nanocomposite.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4503, doi. 10.1007/s10853-008-2649-3

By:

Tun, K.;
Gupta, M.

Publication type:

Article

Modification of alumina scale formation on FeCrAlY alloys by minor additions of group IVa elements.

Published in:

Journal of Materials Science, 2008, v. 43, n. 13, p. 4550, doi. 10.1007/s10853-008-2639-5

By:

Naumenko, D.;
Kochubey, V.;
Niewolak, L.;
Dymiati, A.;
Mayer, J.;
Singheiser, L.;
Quadakkers, W.

Publication type:

Article

Works matching IS 00222461 AND DT 2008 AND VI 43 AND IP 13

New type of low-dielectric composites based on o-cresol novolac epoxy resin and mesoporous silicas: fabrication and performances.

Adiabatic shear failure of high reinforcement content aluminum matrix composites.

Studies on ac response of zinc oxide pellets.

Tensile strength improvement of an Mg–12Gd–3Y (wt%) alloy processed by hot extrusion and free forging.

Preparation of pH-responsive silver nanoparticles by RAFT polymerization.

Effects of fiber surface treatments on mechanical properties of epoxy composites reinforced with glass fabric.

Fabrication of short carbon fiber preforms coated with pyrocarbon/SiC for liquid metal infiltration.

Electrical conductivity enhancement of a polymer using butyl glycidyl ether (BGE)–lithium hexafluorophosphate (LiPF<sub>6</sub>) complex.

Assessment of θ-projection concept and fracture cavitation.

Marangoni convection and weld shape variations in He–CO<sub>2</sub> shielded gas tungsten arc welding on SUS304 stainless steel.

Tribological properties of MoS<sub>2</sub> and carbon fiber reinforced polyimide composites.

Structural and textural characterization of a novel spatially coherent crystalline nanocomposite obtained from a melt of KBr, RbCl, RbBr, KI, RbI, and KCl salts.

The effect of molybdenum on the microstructure and creep behavior of Ti–24Al–17Nb– xMo alloys and Ti–24Al–17Nb– xMo SiC-fiber composites.

Texture simulation of aluminum rod during equal channel angular pressing.

High energy impact techniques application for surface grain refinement in AZ91D magnesium alloy.

Effect of homogenization on recrystallization in a twin-roll cast Al–Fe–Si alloy.

Synthesis of eucryptite spheres.

Photographing impact of plasma-sprayed particles on rough substrates.

Effect of UV exposure on the microstructure and mechanical properties of long fiber thermoplastic (LFT) composites.

Polyacrylonitrile/vapor grown carbon nanofiber composite films.

Characterization of long fiber thermoplastic/metal laminates.

Polymer-bioceramic composites for tissue engineering scaffolds.

Energy dissipation in carbon nanotube composites: a review.

Damage evolution and energy absorption of E-glass/polypropylene laminates subjected to ballistic impact.

Indentation mechanics and fracture behavior of metal/ceramic nanolaminate composites.

Effect of the processing method on the mechanical properties and morphology of compatibilized PA6/LDPE blends.

Preparation of micro-spherical ZrO<sub>2</sub>: Pr<sup>3+</sup> phosphors by ultrasonic assisted CVS.

Production and mechanical properties of metallic glass-reinforced Al-based metal matrix composites.

Determination of Young’s moduli of 3C (110) single-crystal and (111) polycrystalline silicon carbide from operating frequencies.

SiOC ceramic foams synthesized from electron beam irradiated methylsilicone resin.

The effect of graphite addition on the mechanical and tribological properties of pitch-based granular carbon composites.

Retardation of grain growth and cavitation by an electric field during superplastic deformation of ultrafine-grained 3Y-TZP at 1,450–1,600 °C.

High-cycle fatigue of hybrid carbon nanotube/glass fiber/polymer composites.

Effect of the addition of t-ZrO<sub>2</sub> on the material properties of β-TCP/PCL composites.

Preface to special section on composite materials.

Solid-state spun fibers and yarns from 1-mm long carbon nanotube forests synthesized by water-assisted chemical vapor deposition.

Effect of extrusion ratio on microstructure and mechanical properties of microwave-sintered magnesium and Mg/Y<sub>2</sub>O<sub>3</sub> nanocomposite.

Modification of alumina scale formation on FeCrAlY alloys by minor additions of group IVa elements.