Works matching DE "SCREWS"

Results: 3091

An Experimental and Analysis Comparison of Solid Wood Bridle Joints with Various Fastener and Retrofit Methods.

Published in:

Engineering, Technology & Applied Science Research, 2025, v. 15, n. 2, p. 22209, doi. 10.48084/etasr.10375

By:

Sulendra, Ketut;
Turu'allo, Gidion;
Siregar, Atur

Publication type:

Article

Correction: Osseointegration potential of boron-coated titanium alloy pedicle screw in rabbit spine model.

Published in:

2025

By:

Ozer, Hidir;
Hekimoğlu, Mehdi;
Kulac, Ibrahim;
Eren, Ozgur Can;
Arici, Yeliz Kasko;
Çelik, Haydar;
Ozer, Ali Fahir

Publication type:

Correction Notice

Effects of Intersection Angle on the Nail-holding Performances of Pinus massoniana and Cunninghamia lanceolata Dimension Lumber.

Published in:

BioResources, 2025, v. 20, n. 2, p. 3576, doi. 10.15376/biores.20.2.3576-3586

By:

Xiaoxue Xu;
De Li;
Shoulu Yang;
Longxu Wu;
Qingqing Yang;
Haiyuan Yang;
Xuehang Yang;
Qiaoyan Zhang;
Liping Yu;
Zhigang Wu

Publication type:

Article

MATHEMATICAL DESCRIPTON OF WINDING HELICOID SECTION CONSTRUCTION BASED ON THE PREDEFINED STRUCTURAL PARAMETERS.

Published in:

Eastern-European Journal of Enterprise Technologies, 2025, v. 2, n. 1(134), p. 6, doi. 10.15587/1729-4061.2025.324542

By:

Nesvidomin, Andrii;
Pylypaka, Serhii;
Volina, Tetiana;
Ruzhilo, Zinovii;
Kozlova, Olena;
Shuliak, Ivan;
Pylypaka, Taras;
Kremets, Yaroslav;
Nalobina, Olena;
Rebrii, Alla

Publication type:

Article

Evaluation of Process Parameters for Continuous Manufacturing of Quetiapine Fumarate Immediate Release Tablets Using Twin Screw Wet Granulation.

Published in:

Pharmaceutical Research, 2025, v. 42, n. 4, p. 685, doi. 10.1007/s11095-025-03859-7

By:

Naguboyina, Tejaswini;
Lakkala, Preethi;
Munnangi, Siva Ram;
Vemula, Sateesh Kumar;
Repka, Michael

Publication type:

Article

A novel technique for retrieval of cement-retained crown from an implant abutment and converting it into a combination prostheses.

Published in:

Asian Journal of Oral Health & Allied Sciences, 2024, v. 14, n. 1, p. 1, doi. 10.25259/AJOHAS_21_2023

By:

Sahni, Sakshi;
Chopra, Devendra;
Gaur, Abhishek;
Misra, Sumit Kumar

Publication type:

Article

木-混凝土组合梁抗弯承载力.

Published in:

Science Technology & Engineering, 2025, v. 25, n. 11, p. 4698, doi. 10.12404/j.issn.1671-1815.2404151

By:

朱英超;
孙微微;
吴博;
陈顺超;
强明礼

Publication type:

Article

Assessing Local Residence Time Distributions in Screw Extruders Through A New In-line Measurement Instrument.

Published in:

Polymer Engineering & Science, 2006, v. 46, n. 4, p. 510, doi. 10.1002/pen.20495

By:

Xian-ming Zhang;
Zhong-bin Xu;
Lian-fang Feng;
Xiao-bo Song;
Guo-hua Hu

Publication type:

Article

An Axisymmetric Model for Thread Forming in Polycarbonate and Polypropylene Screw and Boss Fasteners.

Published in:

Polymer Engineering & Science, 2004, v. 44, n. 8, p. 1498, doi. 10.1002/pen.20146

By:

Ellwood, Kevin R. J.;
Fesko, Don;
Bauer, David R.

Publication type:

Article

A Study of Residence Time Distribution on Co-Rotating Twin-Screw Extruders. Part II: Experimental Validation.

Published in:

Polymer Engineering & Science, 2003, v. 43, n. 12, p. 1849, doi. 10.1002/pen.10157

By:

Poulesquen, A.;
Vergenes, B.;
Cassagnau, P.;
Michel, A.;
Carneiro, O. S.;
Covas, J. A.

Publication type:

Article

A Study of Residence Time Distribution on Co-Rotating Twin-Screw Extruders. Part I: Theoritical Modeling.

Published in:

Polymer Engineering & Science, 2003, v. 43, n. 12, p. 1841, doi. 10.1002/pen.10156

By:

Poulesquen, A.;
Vergenes, B.

Publication type:

Article

Behavior of Fully Filled Regions in a Non-Intermeshing Twin-Screw Extruder.

Published in:

Polymer Engineering & Science, 2003, v. 43, n. 8, p. 1466, doi. 10.1002/pen.10124

By:

Mudalamane, Rajath;
Bigio, David I.;
Tomayko, David C.;
Meissel, Marcel

Publication type:

Article

Steady and Transient Flow of a Non-Newtonian Chemically Reactive Fluid in a Twin-Screw Extruder.

Published in:

Polymer Engineering & Science, 2002, v. 42, n. 11, p. 2120, doi. 10.1002/pen.11102

By:

Zhu, W.;
Jaluria, Y.

Publication type:

Article

Transient Compositional Effects From Feeders in a Starved Flow Modular Co-Rotating Twin-Screw Extruder.

Published in:

Polymer Engineering & Science, 2002, v. 42, n. 11, p. 2084, doi. 10.1002/pen.11099

By:

Eung Kyu Kim;
White, James L.

Publication type:

Article

The Effects of Kneading Block Design and Operating Conditions on Distributive Mixing in Twin Screw Extruders.

Published in:

Polymer Engineering & Science, 2000, v. 40, n. 5, p. 1095, doi. 10.1002/pen.11237

By:

Shearer, Gifford;
Tzoganakis, Costas

Publication type:

Article

Modeling of the Plasticating Process in a Single-Screw Extruder: A Fast-Track Approach.

Published in:

Polymer Engineering & Science, 2000, v. 40, n. 5, p. 1074, doi. 10.1002/pen.11235

By:

Lai, Eugene;
Wenyu, Ding

Publication type:

Article

Isothermal Transient Startup of a Starved Flow Modular Co-Rotating Twin Screw Extruder.

Published in:

Polymer Engineering & Science, 2000, v. 40, n. 3, p. 543, doi. 10.1002/pen.11185

By:

Eung Kyu Kim;
White, James L.

Publication type:

Article

Mean Residence Time Analysis for Twin Screw Extruders.

Published in:

Polymer Engineering & Science, 2000, v. 40, n. 1, p. 227, doi. 10.1002/pen.11155

By:

Gao, Jun;
Walsh, Gregory C.

Publication type:

Article

A Global Computer Software for Polymer Flows in Corotating Twin Screw Extruders.

Published in:

Polymer Engineering & Science, 1998, v. 38, n. 11, p. 1781, doi. 10.1002/pen.10348

By:

Vergnes, B.;
Valle, G. Delia

Publication type:

Article

The Effect of a New Type of Pin Mixing Section on the Performance of a Single-Screw Extruder.

Published in:

Polymer Engineering & Science, 1998, v. 38, n. 10, p. 1623, doi. 10.1002/pen.10332

By:

Yao, W. G.;
Takahashi, K.

Publication type:

Article

Numerical study of twin-screw extruders by three-dimensional flow analysis-development of analysis technique and evaluation of mixing performance for full flight screws.

Published in:

Polymer Engineering & Science, 1996, v. 36, n. 16, p. 2142, doi. 10.1002/pen.10611

By:

Kajiwara, Toshihisa;
Nagashima, Yuki;
Nakano, Yoshio;
Funatsu, Kazumori

Publication type:

Article

Surface properties and biocompatibility studies on bone plate by magnetorheological finishing.

Published in:

Surface Engineering, 2022, v. 38, n. 7-9, p. 797, doi. 10.1080/02670844.2022.2154006

By:

Singh Rajput, Atul;
Das, Manas;
Kapil, Sajan

Publication type:

Article

Mechanical properties of hybrid joints in timber structures.

Published in:

Journal of Wood Science, 2022, v. 68, n. 1, p. 1, doi. 10.1186/s10086-022-02043-4

By:

Imakawa, Kosuke;
Ochiai, Yo;
Aoki, Kenji;
Hori, Naruhito;
Takemura, Akio;
Yamaguchi, Tetsuo

Publication type:

Article

Experimental investigations into the mechanical performance of glulam dowel-type connections with either bolts or screws as fasteners.

Published in:

Journal of Wood Science, 2021, v. 67, n. 1, p. 1, doi. 10.1186/s10086-021-02002-5

By:

Li, Zheng;
Feng, Wei;
Ou, Jiajia;
Liang, Feng;
He, Minjuan

Publication type:

Article

Experimental and numerical study on the screw connection strength of bamboo-oriented strand board compared with wood-oriented strand board.

Published in:

Journal of Wood Science, 2021, v. 67, n. 1, p. 1, doi. 10.1186/s10086-021-01999-z

By:

Zhang, Kaiting;
Wang, Fuli;
Xu, Runmin;
Fan, Xinhui;
Yan, Bin;
Li, Chuangye;
Liu, Shengquan;
Guo, Yong;
Chen, Yuxia

Publication type:

Article

Prediction of withdrawal resistance for a screw in hybrid cross-laminated timber.

Published in:

Journal of Wood Science, 2020, v. 66, n. 1, p. N.PAG, doi. 10.1186/s10086-020-01926-8

By:

Pang, Sung-Jun;
Ahn, Kyung-Sun;
Kang, Seog Goo;
Oh, Jung-Kwon

Publication type:

Article

Screw-nail withdrawal and bonding strength of paulownia ( Paulownia tomentosa Steud.) wood.

Published in:

Journal of Wood Science, 2014, v. 60, n. 3, p. 201, doi. 10.1007/s10086-014-1391-5

By:

Akyildiz, Mehmet

Publication type:

Article

Experimental and Numerical Analysis of Single Screw Extrusion Process for Thermoplastic PBX Based on PVT Properties.

Published in:

Propellants, Explosives, Pyrotechnics, 2022, v. 47, n. 11, p. 1, doi. 10.1002/prep.202200093

By:

Bu, Yufan;
Chen, Chunyan;
Jiang, Fan;
Wang, Xiaofeng;
Che, Defu;
Nan, Hai

Publication type:

Article

Bimodal Use of Chiral α‐Trifluoromethylalanine in Aib Foldamers: Study of the Position Impact Towards the Helical Screw‐Sense Preference.

Published in:

Chemistry - A European Journal, 2024, v. 30, n. 27, p. 1, doi. 10.1002/chem.202400540

By:

Picois, Nathan;
Bodero, Lizeth;
Milbeo, Pierre;
Brigaud, Thierry;
Chaume, Grégory

Publication type:

Article

Predictive maintenance system for screw compressors using machine learning: a comparative study.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3695, doi. 10.1007/s00170-025-15328-x

By:

Daoudi, Nawal;
Zaki, Smail;
Aboussaleh, Mohamed

Publication type:

Article

Effect of geometric design of injection screws on the plasticization of recycled acrylonitrile butadiene styrene resins.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 3, p. 1705, doi. 10.1007/s00170-025-15280-w

By:

Wu, Yu-Jhih;
Huang, Ming-Shyan

Publication type:

Article

An injection molding method for optical lenses with high-quality consistency by regulating the closing behavior of non-return valve.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 11, p. 5489, doi. 10.1007/s00170-024-14786-z

By:

Ma, Yitao;
Li, Jing;
Jiao, Xiaolong;
Jin, Biao;
Ye, Liyong;
Yang, Weimin;
Xie, Pengcheng

Publication type:

Article

Innovative high-strength screw connections for additive manufactured thermoplastic components.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 9/10, p. 4669, doi. 10.1007/s00170-024-14746-7

By:

Fürst, Thomas;
Göhlich, Dietmar

Publication type:

Article

Evaluation of the effects of extrusion parameters on the swelling of extruded filament in an innovative 3D printer containing a vertical co-rotating twin-screw extrusion unit.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 134, n. 5/6, p. 2217, doi. 10.1007/s00170-024-14233-z

By:

Silva, Dávila Moreira Lopes;
Barbosa, Patrícia Alves;
Chinelatto, Marcelo Aparecido;
de Castro Silveira, Zilda

Publication type:

Article

Analysis of pipe fitting sealing torque with SolidWorks simulations.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 134, n. 5/6, p. 2291, doi. 10.1007/s00170-024-14091-9

By:

Toygar, M. Evren;
Kirdiş, Selin

Publication type:

Article

Prediction and compensation of position error based on deformation analysis of ball screw under complex loads.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 134, n. 3/4, p. 1729, doi. 10.1007/s00170-024-14239-7

By:

Wang, Tianxiang;
Chen, Guangyu;
Sun, Jianhong;
Huang, Yitao;
Zhang, Song

Publication type:

Article

Research on dynamic characteristics of turning process system based on finite element generalized dynamics space.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 9/10, p. 4683, doi. 10.1007/s00170-024-13309-0

By:

Fu, Xiangfu;
Li, Kangnan;
Zheng, Minli;
Wang, Chenglong;
Chen, Enyi

Publication type:

Article

Modeling and prediction of full-term thermal error in linear axis of machine tools based on MSTGCN-A.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 9/10, p. 4805, doi. 10.1007/s00170-024-13021-z

By:

Zhao, Zhiyang;
Huang, Nuodi;
Shen, Yijun;
Jia, Guangjie;
Zhang, Xu;
Zhu, Limin

Publication type:

Article

A proposal of models for thermal compensation in machine tools based on a formulation for in-series heat transfer.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 5/6, p. 2635, doi. 10.1007/s00170-023-12810-2

By:

Zoppellari, Alexandre B.;
Coelho, Reginaldo T.

Publication type:

Article

Robotic grasping and assembly of screws based on visual servoing using point features.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 9/10, p. 3979, doi. 10.1007/s00170-023-12562-z

By:

Hao, Tiantian;
Xu, De

Publication type:

Article

Time-varying thermoelastic coupling analysis of heat source of ball screw feed drive system.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 1/2, p. 923, doi. 10.1007/s00170-023-12352-7

By:

Wu, Huayang;
Li, Jiejing;
Liu, Haixu;
Zuo, Dunwen

Publication type:

Article

Vibration wear mechanism and its control method for large-pitch screw turning tool.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 5/6, p. 2637, doi. 10.1007/s00170-023-11640-6

By:

Fu, Xiangfu;
Li, Kangnan;
Zheng, Minli;
Chen, Enyi;
Wang, Chenglong

Publication type:

Article

Application of machine learning for fleet-based condition monitoring of ball screw drives in machine tools.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 3/4, p. 1143, doi. 10.1007/s00170-023-11524-9

By:

Denkena, Berend;
Dittrich, Marc-André;
Noske, Hendrik;
Lange, Dirk;
Benjamins, Carolin;
Lindauer, Marius

Publication type:

Article

Theoretical and experimental analysis of the temperature rise of a ball screw.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 703, doi. 10.1007/s00170-023-11550-7

By:

Qiu, Ya-Lan;
Zhou, Chang-Guang;
Ou, Yi;
Feng, Fu-Tian

Publication type:

Article

Analysis of self-tapping screw joints in fibre glass reinforced PEI polymer used in the automotive industry.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 11/12, p. 5163, doi. 10.1007/s00170-023-11422-0

By:

Cumbicus, Wilmer E.;
Estrems, Manuel;
Arizmendi, Miguel;
Jiménez, Amaya

Publication type:

Article

A CFD model with free surface tracking: predicting fill level and residence time in a starve-fed single-screw extruder.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 7/8, p. 3579, doi. 10.1007/s00170-023-11329-w

By:

Olofsson, Erik Holmen;
Roland, Michael;
Spangenberg, Jon;
Jokil, Ninna Halberg;
Hattel, Jesper Henri

Publication type:

Article

Local corner smoothing algorithm for screw motor high-precision machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 5/6, p. 2117, doi. 10.1007/s00170-023-11228-0

By:

Yu, Dao-Yang;
Ding, Zhi;
Tian, Xiao-Qing;
Huang, Xiao-Yong

Publication type:

Article

A SVM-based design method for cutting edge profile stability of large-pitch thread turning tool considering vibration.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 9/10, p. 4529, doi. 10.1007/s00170-023-10985-2

By:

Fu, Xiangfu;
Li, Kangnan;
Li, Zhe;
Wang, Xiurui

Publication type:

Article

Surface modeling and load distribution analysis of ball screw formed by whirling milling.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 3/4, p. 1603, doi. 10.1007/s00170-022-10634-0

By:

Lv, Lei;
Lu, Changhou;
Chen, Shujiang

Publication type:

Article

Fatigue life prediction of the preload double-nut ball screw under mixed lubrication.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 11/12, p. 4385, doi. 10.1007/s00170-022-09904-8

By:

Zhao, Jiajia;
Jiang, Hongkui;
Xu, Xiangrong;
Li, Yanfeng;
Qi, Baobao;
Yu, Hanwen

Publication type:

Article