Works matching IS 02683768 AND DT 2025 AND VI 136 AND IP 7/8

Results: 51

Correction to: Study on material removal mechanism and surface formation characteristics of reaction‑bonded silicon carbide by electrical discharge grinding technology.

Published in:

2025

By:

Deng, Shibo;
Dai, Longzhou;
Wu, Mingtao

Publication type:

Correction Notice

Live digital twin with virtual reality for accessible and immersive manufacturing education.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3577, doi. 10.1007/s00170-025-15078-w

By:

Yang, Sheng;
Mirahmadi, Sayed Amirhossein;
Zhu, Enshen;
Solanki, Bhavesh

Publication type:

Article

Retraction Note: Research on the overall architecture of Internet of Things middleware for intelligent industrial parks.

Published in:

2025

By:

Zhang, Li;
Yuan, Huiqun;
Chang, Sheng-Hung;
Lam, Anthony

Publication type:

Correction Notice

Hybrid incremental forming processes: a review.

Published in:

2025

By:

Liao, Juan;
Huang, Youchun;
Lu, Xinyang;
Jiang, Yongtao;
Hussain, Ghulam

Publication type:

Literature Review

Erosion in the contact periphery in the initiation zone due to erosion of abrasive water jet.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3641, doi. 10.1007/s00170-025-15074-0

By:

Ravasio, Chiara;
Conconi, Simone;
Stehle, Daniel;
Pude, Frank;
Poloprudský, Jakub;
Šiška, Filip;
Chlupová, Alice;
Hloch, Sergej

Publication type:

Article

Investigation on the design and heat transfer performance of dry-grinding heat pipes grinding wheels.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3669, doi. 10.1007/s00170-025-15073-1

By:

He, Yongjie;
Yao, Jun;
Zhang, Xiaofeng;
Yuan, Dazhong;
Zhang, Xinhao;
Li, Kailun;
Wang, Dianzheng;
Du, Baorui

Publication type:

Article

Research on digital twin model for milling parameter optimization of thin-walled parts.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3803, doi. 10.1007/s00170-025-15072-2

By:

Song, Jianxin;
Jin, Hongyu;
Wang, Xiaopeng;
Hu, Tengfei;
Han, Zhenyu;
Fu, Hongya

Publication type:

Article

Ultrasonic vibration-assisted scribing of sapphire: effects of ultrasonic vibration and tool geometry.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3559, doi. 10.1007/s00170-025-15071-3

By:

Ansary, Shah Rumman;
Kabir, Sarower;
Nnokwe, Cynthia;
He, Rui;
Cong, Weilong

Publication type:

Article

Correction to: A state‑of‑the‑art review on sustainability evaluation of machining processes involving the effects of advanced cooling technologies.

Published in:

2025

By:

Jamil, Muhammad;
He, Ning;
Wei, Zhao;
Mushtaq, Ray Tahir;
Khan, Aqib Mashood;
Hegab, Hussien;
Gupta, Munish Kumar;
Khanna, Navneet

Publication type:

Correction Notice

Enhancing the hard turning performance of AISI 02 steel with CuO nanocutting fluids.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3753, doi. 10.1007/s00170-025-15063-3

By:

Bacha, Mohamed;
Elbah, Mohamed;
Laouici, Hamdi;
Yallese, Mohamed Athmane;
Sassi, Hacene

Publication type:

Article

Numerical assessment of tool geometry for improving productivity in milling stainless steel 316 L.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3451, doi. 10.1007/s00170-025-15061-5

By:

Malekan, Mohammad;
Madsen, Karoline L.;
Airao, Jay;
Ilvig, Charlotte F.;
Aghababaei, Ramin

Publication type:

Article

Research on the key technologies and applications of finite element simulation for drilling.

Published in:

2025

By:

Qiao, Qingrui;
Li, Guohe;
Huang, Ruifang;
Pu, Junjie;
Zhao, Xutao

Publication type:

Literature Review

Reduction in barreling of hollow cylinder by ram pulsation in upsetting.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3421, doi. 10.1007/s00170-025-15059-z

By:

Matsumoto, Ryo;
Monda, Yuya;
Utsunomiya, Hiroshi

Publication type:

Article

Post-processing treatment of Wire Arc Additive Manufactured NiTi shape memory alloy using laser shock peening process: a study on tensile behavior and fractography analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3315, doi. 10.1007/s00170-025-15058-0

By:

Thangamani, Geethapriyan;
Tamang, Santosh Kumar;
Patel, Md Saad;
Narayanan, Jinoop Arackal;
Pallagani, Jeevankumar;
Rose, Poly;
Gianchandani, Pardeep Kumar;
Thirugnanasambandam, Arunkumar;
Anand, Palani Iyamperumal

Publication type:

Article

Dynamic and dimensional evaluation of robot applications in the drilling process in Al–Mg-Si 6351 T6 aluminum alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3709, doi. 10.1007/s00170-025-15054-4

By:

Santos, Diego Barbosa Pratis;
Maia, Luís Henrique Andrade;
Martins, Paulo Sérgio;
Ba, Elhadji Cheikh Talibouya;
Vieira, Vitor Ferreira;
Shigaki, Yukio;
Fernandes, Gustavo Henrique Nazareno;
Santos, Sandro Cardoso

Publication type:

Article

Error analysis of blade milling considering surface features and deformation.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3775, doi. 10.1007/s00170-025-15053-5

By:

Wu, Shi;
Wang, Chunfeng;
Liu, Xianli;
Wang, Yupeng;
Zhang, Yong

Publication type:

Article

Rolling torque of vibratory thru-feed rolling process for involute splined shaft.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3491, doi. 10.1007/s00170-025-15052-6

By:

Liu, Dazhou;
Ren, Hengwang;
Cao, Yangfeng;
Wang, Yongfei;
Zhao, Shengdun

Publication type:

Article

New point envelope forming technology of cylindrical parts with thin wall and large height.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3621, doi. 10.1007/s00170-025-15050-8

By:

Zhuang, Wuhao;
Deng, Zushen;
Tian, Duanyang;
Han, Xinghui;
Zheng, Fangyan;
Hua, Lin

Publication type:

Article

Dynamic performance by mathematical modeling and trajectory tracking control in an FPGA-based architecture for an XYZ Cartesian system.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3431, doi. 10.1007/s00170-025-15049-1

By:

García-López, Margarita Carmina;
Vargas-Treviño, María Aurora;
López-Gómez, Jesús;
Vergara-Limón, Sergio;
Palomino-Merino, Amparo Dora;
Pintor-Michiman, Juan Francisco;
Carreón-Díaz-de-León, Carlos Leopoldo

Publication type:

Article

Control of temperature distribution of a thermal bed divided into resistive elements for FDM 3D printers.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3607, doi. 10.1007/s00170-025-15048-2

By:

Santos, Emerson Costa;
Munõz, Segundo Nilo Mestanza

Publication type:

Article

A new approach to modelling the instantaneous cutting power in trochoidal machining and its practical application.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3655, doi. 10.1007/s00170-025-15046-4

By:

Deng, Qi;
Wang, Jisong;
Gai, Jingbo;
Hong, Chunsheng;
Chang, Zhiyong;
Zhou, Yimeng

Publication type:

Article

Cutting of rolled metal with a stress concentrator marked by the elastic deformation of the press.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3791, doi. 10.1007/s00170-025-15043-7

By:

Karnaukh, Sergii G.;
Markov, Oleg E.;
Aliiev, Igramotdin S.;
Stankov, Vitalii U.

Publication type:

Article

Study of the effect of the process parameters on the forming limit in shear spinning processes.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3303, doi. 10.1007/s00170-025-15041-9

By:

Elizalde, Sergio;
Coyoy, Pablo;
Casas, Casimir;
Puigjaner, Blanca;
Cabello, Daniel;
Cabrera, Jose Maria

Publication type:

Article

An experimental approach for dimensional tolerance analysis using 3D printed parts.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3691, doi. 10.1007/s00170-025-15040-w

By:

Armillotta, Antonio

Publication type:

Article

A comprehensive experimental investigation on the correlation between chip formation, machined surface integrity, and particle emissions during high-speed milling of TC4 titanium alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3285, doi. 10.1007/s00170-025-15039-3

By:

Ullah, Irfan;
Akinlabi, Esther Titilayo;
Kouam, Jules;
Songmene, Victor

Publication type:

Article

Data-driven optimisation of process parameters for reducing developed surface area ratio in laser powder bed fusion.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3821, doi. 10.1007/s00170-025-15038-4

By:

Qin, Yuchu;
Shi, Peizhi;
Lou, Shan;
See, Tian Long;
Jamal, Mikdam;
Zeng, Wenhan;
Blunt, Liam;
Scott, Paul J.;
Jiang, Xiangqian

Publication type:

Article

Improving WE43/SiC surface nanocomposite properties: a study on post-friction stir processing heat treatment.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3151, doi. 10.1007/s00170-025-15037-5

By:

Kang, Amardeep Singh;
Kumar, Abhinav;
Gouadria, Soumaya;
Kanabar, Bhavesh;
Beemkumar, Nagappan;
Kedia, Ankit;
Singla, Shivali;
Singh, Ravinder Pal

Publication type:

Article

Tube wrinkle state estimation in bending machine using servo signal analysis and random forests.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3329, doi. 10.1007/s00170-025-15036-6

By:

Wu, Tian-Yau;
Hung, Yu-Chuan

Publication type:

Article

Optimization of wire-cut EDM parameters using artificial neural network and genetic algorithm for enhancing surface finish and material removal rate of charging handlebar machining from mild steel AISI 1020.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3505, doi. 10.1007/s00170-025-15034-8

By:

Chanie, Sewale Enyew;
Bogale, Teshome Mulatie;
Siyoum, Yitayal Belew

Publication type:

Article

A generative pre-trained transformer industrial bot to improve operators' working experience in a small Industry 5.0 factory.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3525, doi. 10.1007/s00170-025-15033-9

By:

Kiangala, Kahiomba Sonia;
Wang, Zenghui

Publication type:

Article

A metal 3D-printed non-assembly mandrel for profile bending.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3249, doi. 10.1007/s00170-025-15030-y

By:

Kotzian, Tobias;
Frohn-Sörensen, Peter;
Nebeling, Daniel;
Engel, Bernd

Publication type:

Article

Tool wear monitoring for robotic milling based on multi-dimensional stacked sparse autoencoders and bidirectional LSTM networks with singularity features.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3543, doi. 10.1007/s00170-025-15026-8

By:

Zhou, Chang'an;
Zhang, Kaixing;
Xu, Jiawei;
Guo, Kai;
Liu, Xin;
Hu, Bingyin;
Wang, Gang

Publication type:

Article

Investigation of electron tunneling in ultra-precision machine tool for measuring the distance of tool and workpiece.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3239, doi. 10.1007/s00170-025-15024-w

By:

Yoo, Handeul;
Maeng, Sangjin

Publication type:

Article

Advanced hybrid laminates: elastomer integration for optimized mechanical properties.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3177, doi. 10.1007/s00170-025-15023-x

By:

Raimondi, Luca;
Bernardi, Federico

Publication type:

Article

Cold working technologies for increasing the fatigue life of metal structural components with fastener holes—review and perspectives.

Published in:

2025

By:

Duncheva, Galya;
Maximov, Jordan

Publication type:

Literature Review

Rubber mandrel and internal pressure effects on thin-walled tube bending: a comparative study.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3197, doi. 10.1007/s00170-025-15019-7

By:

Sayar, Majid Askari;
Gerdooei, Mahdi;
Eipakchi, Hamidreza;
Nosrati, Hasan Ghafourian

Publication type:

Article

Fast and high precision control approach: polyline analysis and optimal NURBS interpolation for CNC machine tools.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3591, doi. 10.1007/s00170-025-15018-8

By:

Kelekçi, Ethem;
Kizir, Selcuk

Publication type:

Article

Study of the conductive ink wash-out during overmolding.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3407, doi. 10.1007/s00170-025-15016-w

By:

Pascual Cuenca, Enric;
Sánchez-Soto, Miguel;
Fontdecaba Baig, Enric;
De la Cruz, Lucia G.

Publication type:

Article

Multi-objective optimization for shrinkage, mechanical, and shape-memory behavior in 4D printed polymer composites.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3345, doi. 10.1007/s00170-025-15012-0

By:

Dixit, Garima;
Pandey, Pulak Mohan

Publication type:

Article

Synthesis of micro-micro titanium composite powder with the electrostatic adsorption process.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3215, doi. 10.1007/s00170-025-15003-1

By:

Ali, Mubasher;
Lin, Feng;
Tan, Yuanfu;
Su, Zhou;
Liao, Wei-Hsin;
Wong, Hay

Publication type:

Article

Modeling of tensile properties and failure of friction stir welded dissimilar aluminum alloys coupled with process-induced defects.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3263, doi. 10.1007/s00170-025-15001-3

By:

Prodkornburee, Tanapat;
Uthaisangsuk, Vitoon

Publication type:

Article

A new ontology-based approach to automatic information extraction from speech for production disturbance management.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3735, doi. 10.1007/s00170-025-15000-4

By:

Macioł, Andrzej;
Macioł, Piotr;
Gumienny, Grzegorz;
Wrzała, Konrad

Publication type:

Article

Effect of plug shape on forming square tube by expansion drawing.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3367, doi. 10.1007/s00170-024-14986-7

By:

Kato, Yusuke;
Zhang, Shiliang;
Kuboki, Takashi;
Akiyama, Masayoshi;
Kajikawa, Shohei

Publication type:

Article

Application of drill bit coatings for fiber/metal stack drilling in aircraft manufacturing: a comprehensive review.

Published in:

2025

By:

Jebaratnam, Joy Mathavan

Publication type:

Literature Review

Modeling of spindle speed and feed rate considering the kinematic behavior of CNC lathe in face turning.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3387, doi. 10.1007/s00170-024-14978-7

By:

Gassara, Bassem;
Sai, Wassila Bouzid

Publication type:

Article

Chatter stability prediction methods in the machining processes: a review.

Published in:

2025

By:

Qin, Zengxiu;
Jiang, Shanglei;
Yin, Shuqiang;
Sun, Yuwen;
Wang, Mingliang

Publication type:

Literature Review

Correction to: Cost‑effective AIoT‑based hazard detection using 2D camera in manufacturing environments.

Published in:

2025

By:

Kang, Hyun‑Chul;
Lim, Sang‑Kyu;
Lee, Yongkwi;
Kim, Min‑Gi;
Son, Ji‑Yeon

Publication type:

Correction Notice

Improved GMAW process simulation modelling by considering arc root conduction zone and transistorized power source.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3131, doi. 10.1007/s00170-024-14968-9

By:

Chaouch, Saad;
Merazi, Sayah;
Terfa, Hani;
Belgacem, Leila;
Mourad, Hasni

Publication type:

Article

Predicting cutting tool life: models, modelling, and monitoring.

Published in:

2025

By:

Khadka, Sujan;
Rahman Rashid, Rizwan Abdul;
Stephens, Guy;
Papageorgiou, Angelo;
Navarro-Devia, John;
Hägglund, Sören;
Palanisamy, Suresh

Publication type:

Literature Review

Precise path following and trajectory tracking in cable-driven parallel robots through model predictive control with embedded reference dynamics.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3465, doi. 10.1007/s00170-024-14960-3

By:

Bettega, Jason;
Richiedei, Dario;
Trevisani, Alberto

Publication type:

Article