Works matching IS 02683768 AND DT 2025 AND VI 136 AND IP 3

Results: 55

Formulation, characterization, mechanism, and application of vegetable oil-based nano-cutting fluids.

Published in:

2025

By:

Wang, Wei;
Lin, Hualin;
Zhou, Mingan;
Xie, Haijiang;
Dai, Bin;
Han, Sheng

Publication type:

Literature Review

Theoretical and experimental approach with inverse problems for the thermal characterization of parts printed by FDM.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1741, doi. 10.1007/s00170-024-14969-8

By:

de Camargo, Jose Carlos;
da Silva Neto, Antonio Jose;
Knupp, Diego Campos;
da Silva Abreu, Luiz Alberto;
de Andrade, Gabriel Marques

Publication type:

Article

Research of steel strips microstructure and properties after symmetric and asymmetric cold rolling.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1649, doi. 10.1007/s00170-024-14962-1

By:

Kozhevnikov, Aleksandr Vyacheslavovich;
Skripalenko, Mikhail Mikhailovich;
Rogachev, Stanislav Olegovich;
Sundeev, Roman Vyacheslavovich;
Kozhevnikova, Irina Aleksandrovna;
Skripalenko, Mikhail Nikolaevich;
Romantsev, Boris Alekseevich;
Danilin, Andrei Vladimirovich

Publication type:

Article

SVR-MTS prediction approach for shrinkage defects.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1633, doi. 10.1007/s00170-024-14958-x

By:

Hernández-Briones, Miguel A.;
Reséndiz-Flores, Edgar O.;
Serrano-Toledo, José L.

Publication type:

Article

Characterization and optimization of cutting depth in passive-compliant robotic belt grinding.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1659, doi. 10.1007/s00170-024-14957-y

By:

Torres-Izu, Ramon;
Aginaga, Jokin;
Mata, Sara;
Barrenetxea, David;
Inziarte, Ibai

Publication type:

Article

A case study for qualification of a structural additively manufactured one-off component.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1587, doi. 10.1007/s00170-024-14954-1

By:

E. Burns, Devin;
R. Burke, Eric

Publication type:

Article

Prediction of surface roughness of tempered steel AISI 1060 under effective cooling using super learner machine learning.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1421, doi. 10.1007/s00170-024-14952-3

By:

Ziyad, Firi;
Alemayehu, Habtamu;
Wogaso, Desalegn;
Dadi, Firomsa

Publication type:

Article

Innovative defect detection in surface-modified gears using time–frequency domain analysis and deep learning models.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1577, doi. 10.1007/s00170-024-14949-y

By:

Huang, Shu-Hsien;
Wu, Ting-En;
Lai, Chia-Hung

Publication type:

Article

Flow rate-dependent interlayer adhesion in FDM: a thermal and mechanical analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1703, doi. 10.1007/s00170-024-14943-4

By:

Lambiase, Francesco;
Pace, Francesco;
Andreucci, Elena;
Paoletti, Alfonso

Publication type:

Article

High performance particle-reinforced epoxy composites with industrial grade graphite, GNPs and hBN: a comparative study.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1379, doi. 10.1007/s00170-024-14941-6

By:

Vesco, Silvia;
Salvi, Daniel;
Almonti, Daniele

Publication type:

Article

Active compliance control of grinding process for stripping enameled copper wire.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1671, doi. 10.1007/s00170-024-14940-7

By:

Choi, Sung-Jin;
Oh, Jun-young;
Sim, Beomsik;
Lee, Wonkyun

Publication type:

Article

Real-time advanced ultrasonic imaging of assemblies of glass and SiC mirrors of the extremely large telescope.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1455, doi. 10.1007/s00170-024-14939-0

By:

Ducousso, Mathieu;
Boujon, Eric;
Reverdy, Frédéric;
Bannouf, Souad;
Puel, Benoit;
Lonné, Sebastien;
Guggenheim, Alexandra;
Mallet, Florent;
Tonnellier, Xavier;
Mercier-Nallet, Hugo;
Lamour, Claire;
Frapolli, Camille

Publication type:

Article

Mechanical strength investigation of gyroid design parameters in titanium fixed partial denture frameworks manufactured by additive manufacturing.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1617, doi. 10.1007/s00170-024-14938-1

By:

Çalışkan, Cemal İrfan;
Khan, Hamaid Mahmood;
Koca, Aliihsan;
Şahin, Meryem;
Tarakçı, Gürkan;
Sivri, Burak

Publication type:

Article

Efficient weld bead recognition for robotic grinding using laser vision and machine learning.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1327, doi. 10.1007/s00170-024-14937-2

By:

Chung, Chunhui;
Chang, Kai-Bo;
Kuo, Jia-Wei

Publication type:

Article

Microstructural and wear investigation of FeCrC and FeCrC-NbB hardfacing alloys deposited with FCAW-S.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1241, doi. 10.1007/s00170-024-14936-3

By:

Cunha, Mateus Codognotto;
Oliveira, Higor Ribeiro;
Oliveira, Alex;
da Cruz Costa de Souza, Marcelo;
Arias, Ariel Rodriguez;
Fagundes, José Gedael

Publication type:

Article

Experimental and numerical study on fusion zone in the laser welding process of AA6061-T6 overlap joint: using smoothed particle hydrodynamics (SPH).

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1527, doi. 10.1007/s00170-024-14934-5

By:

El Kinani, Radouane;
Fraser, Kirk;
Dehghan, Shayan;
Barka, Noureddine;
El Ouafi, Abderrazak;
Nadeau, François

Publication type:

Article

Development of a pellet extruder for blending different materials and study on the properties of eco-friendly flame retardant materials printed using a large-scale 3D printer.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1339, doi. 10.1007/s00170-024-14931-8

By:

Jung, Min-Su;
Ha, Jeong-Ung;
Park, Jong-kyu

Publication type:

Article

Integration of FDM process-structure relationship in topology optimization formulation.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1483, doi. 10.1007/s00170-024-14929-2

By:

Mehir, Youcef;
Benaouali, Abdelkader;
Benabid, Yacine

Publication type:

Article

Artificial neural network-based flow length prediction system under different machine settings for micro-injection moulding.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1281, doi. 10.1007/s00170-024-14928-3

By:

Liparoti, Sara;
Di Pasquale, Valentina;
Volpe, Valentina;
Adinolfi, Francesco;
Pantani, Roberto

Publication type:

Article

Evaluating mixing methods for FFF-printed PLA-HA composites: Towards high-performance composites and advancements in additive manufacturing.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1267, doi. 10.1007/s00170-024-14927-4

By:

Sardar, Muhammad Zaryyab;
Gide, Kunal Manoj;
Stuart, Alexander;
Rostobaya, Violetta;
Zarrabinia, Kian;
Beheshti, Ali;
Bagheri, Shaghayegh

Publication type:

Article

Experimental investigations on solid and metal-cored creep-resistant wires deposited under GMA and PTA-based wire arc additive manufacturing (WAAM).

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1207, doi. 10.1007/s00170-024-14926-5

By:

Iqbal, Hambal;
Pardal, Goncalo;
Suder, Wojciech;
Ascari, Alessandro;
Fortunato, Alessandro;
Liverani, Erica;
Williams, Stewart;
Neto, Leonor

Publication type:

Article

Impact of cross-helix texture scaling on grinding performance using resin-bonded CBN laser-textured wheels.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1757, doi. 10.1007/s00170-024-14925-6

By:

Ćwikła, Michał;
Dziedzic, Robert;
Kołodziej, Marek;
Reiner, Jacek

Publication type:

Article

Influence of shielding gas flow rate on residual stresses in GMAW weld beads using L<sub>CR</sub> waves.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1191, doi. 10.1007/s00170-024-14924-7

By:

Grzybowski, Igor Felipe;
de Almeida, Diego Tolotti;
Scheuer, Cristiano José;
Junior, Paulo Pereira;
dos Santos Junior, Auteliano Antunes;
Buenos, Alexandre Aparecido

Publication type:

Article

Multilabel artificial intelligence model for online monitoring of electrical discharge turning by audio-based signals.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1467, doi. 10.1007/s00170-024-14923-8

By:

Soleymani, Mehdi;
Khoshnevisan, Mohammad;
Hadad, Mohammadjafar;
Afshari, Behzad Mohasel

Publication type:

Article

A novel calibration method for robotic arm tool center point without a physical tool apex.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1501, doi. 10.1007/s00170-024-14906-9

By:

Huang, Cheng-Kai;
Zhan, Hao-Yun

Publication type:

Article

Chatter detection in turning using axis drive motor current.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1035, doi. 10.1007/s00170-024-14921-w

By:

Jasiewicz, Marcin;
Miądlicki, Karol;
Powałka, Bartosz

Publication type:

Article

Multiphysics modelling of wire-based directed energy deposition process with experimental validation.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 925, doi. 10.1007/s00170-024-14905-w

By:

Nagaraja, Kishore Mysore;
Budde, Laura;
Schwarz, Nick;
Hermsdorf, Jörg;
Qian, Dong;
Li, Wei

Publication type:

Article

Self-pierce Riveting and Riv-bonding of densified superwood to aluminum for structural applications.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1231, doi. 10.1007/s00170-024-14904-x

By:

Hartsfield, Matt;
Luo, Alan A.

Publication type:

Article

Frequency domain signal analysis based index for expulsion quantification in resistance spot welding.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1149, doi. 10.1007/s00170-024-14922-9

By:

Antal, Gabriel;
Razza, Valentino;
De Maddis, Manuela

Publication type:

Article

Automated inspection of the tip condition of a welding tungsten electrode.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1773, doi. 10.1007/s00170-024-14911-y

By:

Trebuľa, Marek;
Čierny, Lukáš;
Dekan, Martin;
Kovaríková, Zuzana;
Prištiak, Ján;
Nagy, František;
Duchoň, František

Publication type:

Article

Single-composition functionally graded Ti-6Al-4 V for mimicking composite material fiber reinforcement through post-heating laser scanning.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1297, doi. 10.1007/s00170-024-14902-z

By:

Tanrikulu, Ahmet Alptug;
Ganesh-Ram, Aditya;
Hekmatjou, Hamidreza;
Durlov, Sadman Hafiz;
Salehin, Md Najmus;
Amerinatanzi, Amirhesam

Publication type:

Article

Design and fabrication of an affordable, high-performance life-size humanoid robotic hand with integrated nanocomposite strain sensors.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1363, doi. 10.1007/s00170-024-14918-5

By:

Attaoui, Ahmed;
Naifar, Slim;
Bradai, Sonia;
Ben Atitallah, Bilel;
Kanoun, Olfa

Publication type:

Article

A submodeling approach for efficient prediction of local temperature profiles in component-scale additive manufacturing.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1561, doi. 10.1007/s00170-024-14913-w

By:

Frölich, Felix;
Hof, Lukas;
Zimmerling, Clemens;
Wittemann, Florian;
Kärger, Luise

Publication type:

Article

Optimisation of process parameters in Arburg Plastic Freeforming for enhanced part density and geometric accuracy.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1111, doi. 10.1007/s00170-024-14912-x

By:

Profili, Andrea;
Buonamici, Francesco;
Caporali, Stefano;
Volpe, Yary;
Governi, Lapo

Publication type:

Article

Industrial workspace detection of a robotic arm using combined 2D and 3D vision processing.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1317, doi. 10.1007/s00170-024-14901-0

By:

Schorr, Logan;
Cobilean, Victor;
Mavikumbure, Harindra S.;
Manic, Milos;
Hadimani, Ravi L.

Publication type:

Article

Design of experiment and analysis of deformation for compression test of lattices using digital image correlation.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1131, doi. 10.1007/s00170-024-14900-1

By:

Vaziri Sereshk, Mohammad Reza;
Faierson, Eric J.;
Nelson, Benjamin D.

Publication type:

Article

Pulsed laser directed energy deposition of super duplex stainless steel: engineering microstructure and improving mechanical properties.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 983, doi. 10.1007/s00170-024-14899-5

By:

Sayyar, Navid;
Tucho, Wakshum Mekonnen;
Hansen, Vidar

Publication type:

Article

Configuration control of thin-walled stepped aluminum alloy parts by subregional magnetorheological flexible-die forming.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1597, doi. 10.1007/s00170-024-14893-x

By:

Wang, Pengyi;
Zuo, Peng;
Wan, Gehui;
Yuan, Binxian;
Jin, Yichun;
Xiang, Nan;
Wang, Zhongjin

Publication type:

Article

Evaluation of the Mechanical property heterogeneity in laser-directed energy deposited Ti-6Al-4V alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 937, doi. 10.1007/s00170-024-14892-y

By:

Alqawasmi, Laith;
Bijjala, Surya T.;
Khraishi, Tariq;
Kumar, Pankaj

Publication type:

Article

Research on intelligent analogy design method of cylindrical gear metal powder injection molding process based on knowledge-driven.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1681, doi. 10.1007/s00170-024-14891-z

By:

Kong, Yan;
Yin, Zhiqin;
Zhang, Xilei;
Zhang, Zhibing;
Liu, Yuqi

Publication type:

Article

Cognitive intelligent task allocation for human-automation symbiosis in Industry 5.0 manufacturing systems via non-cooperative game theory: a bi-level optimization approach.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1717, doi. 10.1007/s00170-024-14890-0

By:

Wang, Shu;
Jiao, Roger J.

Publication type:

Article

Design, modeling, and experimental study of annealed 3D-printed cantilever beam force sensors.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1025, doi. 10.1007/s00170-024-14888-8

By:

Marr, Kira;
Utter, Brent

Publication type:

Article

A high-speed camera-based measurement system for monitoring and controlling the induced jet break-up fabrication of advanced ceramic breeder pebbles.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1253, doi. 10.1007/s00170-024-14887-9

By:

Zhang, Miao;
Leys, Oliver;
Vogelbacher, Markus;
Knitter, Regina;
Matthes, Jörg

Publication type:

Article

Impact of composite patch stiffness, adhesive type, and material on the fatigue life of repaired aluminum alloy 6061-T61 plates.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1409, doi. 10.1007/s00170-024-14886-w

By:

Bahram, Kaddour;
Chaib, Mohammed;
Slimane, Abdelkader;
Bouchouicha, Benattou

Publication type:

Article

Nonlinear tolerancing: variation simulation for multi-station assembly with compliant parts.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 961, doi. 10.1007/s00170-024-14884-y

By:

Lupuleac, Sergey;
Shinder, Julia;
Petukhova, Margarita;
Zaitseva, Nadezhda;
Churilova, Maria

Publication type:

Article

Mitigating voids in AM: re-melt and parameter adjustment strategies.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1545, doi. 10.1007/s00170-024-14882-0

By:

Cummings, Christine M.;
Corbin, David J.;
Reutzel, Edward W.;
Keist, Jayme S.;
Overdorff, Ryan;
Nassar, Abdalla R.

Publication type:

Article

Data-driven analysis of bonding strength in laser-structured metal-GFRP hybrid joints via groove morphology.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1095, doi. 10.1007/s00170-024-14881-1

By:

Choi, Jun Young;
Kim, Geun Young;
Kim, Do Hoi;
Yoon, Narae;
Han, Amy Kyungwon;
Ahn, Sung-Hoon

Publication type:

Article

Formability of sheet metal formed using rubber pad die with lateral forming force mechanism.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1009, doi. 10.1007/s00170-024-14879-9

By:

Huang, Hao-Lun;
Kuo, Chun-Chih

Publication type:

Article

Investigation on hybrid processing of picosecond laser and micro milling of the 340 GHz folded waveguide.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1439, doi. 10.1007/s00170-024-14878-w

By:

Hao, Xiuqing;
Hu, Zhiwen;
Pan, Pan;
Li, Shangshang;
Wan, Yafang;
Wei, Chengfeng;
Qiu, Zhenyu;
Li, Liang;
He, Ning

Publication type:

Article

Precision turning for robust optimization in the manufacture of femoral heads for hip arthroplasty.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1053, doi. 10.1007/s00170-024-14831-x

By:

Alvim, Aline Cunha;
Streitenberger, Simone Carneiro;
Ferreira, João Roberto;
de Freitas Gomes, José Henrique;
Markopoulos, Angelos P.

Publication type:

Article