Works matching IS 02683768 AND DT 2024 AND VI 133 AND IP 7/8

Results: 64

Correction to: Numerical control machining step error calculation based on hybrid particle swarm optimization method.

Published in:

2024

By:

Li, Peng‑Fei;
Liu, Wei;
Zhang, Zi‑Yu;
Kang, Jia;
Zhang, Jia‑Ping

Publication type:

Correction Notice

Correction to: Application of ML methods to predict residual stresses and strains after wire drawing process.

Published in:

2024

By:

Demin, Dmitriy;
Grebenkin, Ilya

Publication type:

Correction Notice

Correction to: Numerical simulation and experimental study on axial compression electromagnetic bulging of aluminum alloy tube.

Published in:

2024

By:

Dahao, Wang;
Zhenyu, Zhu;
Fei, Pan;
Xiaoming, Sun;
Xiaohui, Cui;
Jinxiu, Fang

Publication type:

Correction Notice

Correction to: Scanning strategies for the 316L part with lattice structures fabricated by selective laser melting.

Published in:

2024

By:

Huang, Renkai;
Wu, Yunshu;
Huang, Linqing;
Pan, Chunrong;
Sun, Yuchun;
Tian, Sukun;
Wang, Dongsheng;
Yang, Youwen

Publication type:

Correction Notice

Enhancement of wire electrochemical micromachining of 40CrNiMoA with electrolyte ultrasonic assistance.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3715, doi. 10.1007/s00170-024-14012-w

By:

Zhang, Hongqiao;
Han, Zhao;
Fang, Xiaolong

Publication type:

Article

Enhancing the bending strength of PEEK biomedical material welding parts using continuous drive friction welding with progressively increased welding area method.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3619, doi. 10.1007/s00170-024-14011-x

By:

Kuo, Chil-Chyuan;
Liang, Hua-Xhin;
Huang, Song-Hua

Publication type:

Article

Intensity-dependent absorption signature for in situ process characterization in laser processing of 316L.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3497, doi. 10.1007/s00170-024-14008-6

By:

Wittemer, Moritz;
Wudy, Katrin

Publication type:

Article

Finite element analysis of sintering deformation in aluminum finned heatsink printed by binder jetting.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3901, doi. 10.1007/s00170-024-14010-y

By:

Oya, Naoki;
Sato, Tatsuya;
Yamaguchi, Daichi;
Shinagawa, Kazunari

Publication type:

Article

Real-time chatter detection during turning operation using wavelet scattering network.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3699, doi. 10.1007/s00170-024-14006-8

By:

Sharma, Sanjay;
Gupta, Vijay Kumar;
Rahman, Mustafizur;
Saleh, Tanveer

Publication type:

Article

Research on hydro-pressing of aluminum alloy double-cavity profile components.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3859, doi. 10.1007/s00170-024-14004-w

By:

Han, Cong;
Wang, Yejie;
Zhuang, Yongpeng

Publication type:

Article

Thermal-fluid coupling model of crater formation in electrical discharge machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3435, doi. 10.1007/s00170-024-13999-6

By:

Xie, Baocheng;
Hou, Jinting;
Dong, Boxiong;
Xu, Chenhao;
Yao, Rongzheng;
Zhang, Yuan

Publication type:

Article

Numerical simulation and experimental study on axial compression electromagnetic bulging of aluminum alloy tube.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3477, doi. 10.1007/s00170-024-13997-8

By:

Dahao, Wang;
Zhenyu, Zhu;
Fei, Pan;
Xiaoming, Sun;
Xiaohui, Cui;
Jinxiu, Fang

Publication type:

Article

Influence of ultrasonic impact characteristics on stress distribution of LMD deposition layer.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3785, doi. 10.1007/s00170-024-13995-w

By:

Wei, Xu;
Zhang, Laiqi;
Li, Xianlong

Publication type:

Article

Dynamic resistance signal–based wear monitoring of resistance spot welding electrodes.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3267, doi. 10.1007/s00170-024-13993-y

By:

Zhao, Dawei;
Vdonin, Nikita;
Slobodyan, Mikhail;
Butsykin, Sergey;
Kiselev, Alexey;
Gordynets, Anton;
Wang, Yuanxun

Publication type:

Article

Retrieval of CAD part models complying with design specification using a relational design rule-embedded BOM.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3283, doi. 10.1007/s00170-024-13990-1

By:

Kwon, Omin;
Yeo, Changmo;
Mun, Duhwan

Publication type:

Article

Strategy and computational examination of surface grinding machine with predictive diagnostic performance system during operation.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3209, doi. 10.1007/s00170-024-13987-w

By:

Chan, Tzu-Chi;
Ullah, Aman;
Dutta, Arindam

Publication type:

Article

Ti-6Al-4V alloy printing — correlations between experimental and numerical modelling melt pool data.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3603, doi. 10.1007/s00170-024-13979-w

By:

Bagasol, Axieh Joy I.;
Parivendhan, Gowthaman;
Ivankovic, Alojz;
Dowling, Denis P.

Publication type:

Article

Effect of cooling strategies on Inconel 625 components produced by wire arc additive manufacturing.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3631, doi. 10.1007/s00170-024-13978-x

By:

Carvalho, Gustavo H.S.F.L.;
Silvestri, Alessia Teresa;
Campatelli, Gianni;
Squillace, Antonino

Publication type:

Article

On the infiltration of cellular solids by sheet molding compound: process simulation and experimental validation.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3745, doi. 10.1007/s00170-024-13977-y

By:

Bernardi, Federico;
Sensini, Alberto;
Raimondi, Luca;
Donati, Lorenzo

Publication type:

Article

An innovative methodology in narrow gap GTAW for alternating magnetic field with synchronous swing of filler wire and arc.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3913, doi. 10.1007/s00170-024-13968-z

By:

Sun, Qi;
Liu, Yibo;
Ren, Huisheng;
Liu, Chengyin;
Zhang, Qinghua;
Tang, Xiaojun;
Qian, Xinjun;
Sun, Qingjie

Publication type:

Article

A new approach of preheating and powder sintering in electron beam powder bed fusion.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3769, doi. 10.1007/s00170-024-13966-1

By:

Böhm, Jonas;
Breuning, Christoph;
Markl, Matthias;
Körner, Carolin

Publication type:

Article

An experimental study of multi-sensor tool wear monitoring and its application to predictive maintenance.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3415, doi. 10.1007/s00170-024-13959-0

By:

Herrera-Granados, German;
Misaka, Takashi;
Herwan, Jonny;
Komoto, Hitoshi;
Furukawa, Yoshiyuki

Publication type:

Article

Integrated production-maintenance strategy considering energy consumption and recycling constraints in dry machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3335, doi. 10.1007/s00170-024-13954-5

By:

Guendouli, El Mehdi;
Mifdal, Lahcen;
Dellagi, Sofiene;
Kibbou, El Mehdi;
Moufki, Abdelhadi

Publication type:

Article

Scanning strategies for the 316L part with lattice structures fabricated by selective laser melting.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3165, doi. 10.1007/s00170-024-13952-7

By:

Huang, Renkai;
Wu, Yunshu;
Huang, Linqing;
Pan, Chunrong;
Sun, Yuchun;
Tian, Sukun;
Wang, Dongsheng;
Yang, Youwen

Publication type:

Article

Application of ML methods to predict residual stresses and strains after wire drawing process.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3461, doi. 10.1007/s00170-024-13949-2

By:

Demin, Dmitriy;
Grebenkin, Ilya

Publication type:

Article

Modeling and experimental study of surface generation in ultrasonic vibration-assisted grinding of Ti-6Al-4V micro-channels.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3801, doi. 10.1007/s00170-024-13946-5

By:

Zhao, Jing;
Zhang, Quanli;
Zhang, Yinwu;
Zhu, Yandan;
Zeng, Zhaoqi;
Yang, Changyong;
Chen, Yan

Publication type:

Article

Tool wear prediction based on a fusion model of data-driven and physical models in the milling process.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3673, doi. 10.1007/s00170-024-13945-6

By:

Fan, Chang;
Zhang, Zhao;
Zhang, Dinghua;
Luo, Ming

Publication type:

Article

Cathode design and gap multi-physical field coupling simulation analysis for ECM of shaped grid holes.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3999, doi. 10.1007/s00170-024-13943-8

By:

Wang, Yajun;
Jia, Jianli;
Song, Mei;
Hao, Yajing

Publication type:

Article

A vibration-resistant detection method of weld position and gap for seam tracking of Z-weave GMAW.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3319, doi. 10.1007/s00170-024-13942-9

By:

Gao, Jiapeng;
Hong, Bo;
Jia, Aiting;
Zheng, Yi

Publication type:

Article

Robust design method and intelligent system for trimming die of complex automotive panel.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3549, doi. 10.1007/s00170-024-13940-x

By:

Zhang, Xilei;
Deng, Guochao;
Zhang, Zhibing;
Liu, Yuqi;
Tao, Jikun;
Wang, Zhen

Publication type:

Article

Energetic materials in 3D: an in-depth exploration of additive manufacturing techniques.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3059, doi. 10.1007/s00170-024-13937-6

By:

Zong, Hu-zeng;
Wang, Su-wei;
Ren, Hao;
Hao, Ga-zi;
Xiao, Lei;
Jiang, Wei

Publication type:

Article

Exploring the probe offset window for dynamic support friction stir welding of Al/Ti dissimilar alloys.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3973, doi. 10.1007/s00170-024-13936-7

By:

Zuo, Yingying;
Liu, Huijie;
Li, Dongrui;
Gao, Yisong;
Li, Xuanmo

Publication type:

Article

Chatter monitoring method of Ti-6Al-4V thin-walled parts based on MAML optimized transfer learning.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3647, doi. 10.1007/s00170-024-13932-x

By:

Wang, Xinzheng;
Liu, Linyan;
Huang, Lei;
Qi, Zhixiang;
Tang, Xiongqiu;
Tang, Daqin;
Wang, Zhenhua

Publication type:

Article

Material removal mechanism of brittle-ductile transition in milling SiC ceramic and experimental verification.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3583, doi. 10.1007/s00170-024-13931-y

By:

Qiu, Jian;
Ge, Renpeng;
Han, Tingchao

Publication type:

Article

An optimal localization of blank part in NC machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3757, doi. 10.1007/s00170-024-13927-8

By:

Lu, Beibei;
Liang, Dan;
Yin, Zhixue;
Lan, Ziqi

Publication type:

Article

Effects of discharge current and discharge duration on the crater morphology in single-pulse arc machining of Ti6Al4V.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3367, doi. 10.1007/s00170-024-13926-9

By:

Han, Jianqing;
Zhou, Yongqiang;
Li, Zhen;
Chen, Yimiao;
Zhang, Qinhe

Publication type:

Article

Investigation on the micro-cutting mechanism of aluminum matrix composites with ultrasound elliptical vibration.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3727, doi. 10.1007/s00170-024-13924-x

By:

Zhang, Ping;
Wang, Shunxiang;
Zhang, Songting;
Yue, Xiujie

Publication type:

Article

A natural bare-hand interface-enabled interactive AR assembly guidance.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3193, doi. 10.1007/s00170-024-13922-z

By:

Fang, Wei;
Teng, Zhan;
Zhang, Qiankun;
Wu, Zhaowei

Publication type:

Article

Pre-control of grinding surface quality by data-driven: a review.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3081, doi. 10.1007/s00170-024-13921-0

By:

Fu, Xiaojing;
Lv, Lishu;
Chen, Bing;
Deng, Zhaohui;
Wu, Mingtao

Publication type:

Article

Modeling and experimental study on grinding morphology of combinatorial bionic structured grinding wheels.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3301, doi. 10.1007/s00170-024-13920-1

By:

Yu, Haiyue;
Sun, Kaixin;
Jiao, Anyuan;
Zhang, Junqiu;
Han, Zhiwu

Publication type:

Article

A novel interpolator designed for laser scanning welding of hairpin windings in electric vehicle motors.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3225, doi. 10.1007/s00170-024-13917-w

By:

Zhu, Tieshuang;
Zhang, Chengrui;
Yin, Yisheng

Publication type:

Article

Process parameters optimization of differential heating push-bending for small bending radius tube based on orthogonal experiments.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3399, doi. 10.1007/s00170-024-13916-x

By:

Peng, Mingliang;
Xu, Xuefeng;
Fan, Yubin;
Xiao, Jie;
Wei, Liming;
Xie, Jun;
Yang, Dong

Publication type:

Article

The effect of blanking clearances on side profiles of blanked parts in micro blanking.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3957, doi. 10.1007/s00170-024-13912-1

By:

Yang, Junfeng;
Yu, Zuyuan;
Liu, Yunhao;
Zheng, Jipeng

Publication type:

Article

Investigation on high-speed dry milling stability of high strength steel by compound Simpson prediction method.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3251, doi. 10.1007/s00170-024-13911-2

By:

Tu, Gan;
Yan, Chunping;
Song, Lei;
Xiang, Minghong;
Yang, Mao

Publication type:

Article

Research on the precision forming cathode design method of electrochemical machining all-metal screw drill stator.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3663, doi. 10.1007/s00170-024-13910-3

By:

Tang, Lin;
Wang, Yi;
Zhang, Jingjing;
Zhang, Jun;
Cao, Tong;
Deng, Wen

Publication type:

Article

Optimization of multi-directional forging parameters of large-scale Mg-Gd-Y-Zn-Zr alloy forged part guided by finite element simulation.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3569, doi. 10.1007/s00170-024-13905-0

By:

Li, Jiyu;
Zeng, Jian;
Wang, Fulin;
Zhao, Chaoyu;
Zhou, Haitao;
Wang, Fenghua;
Dong, Shuai;
Jin, Li;
Dong, Jie

Publication type:

Article

Study on material removal mechanism and surface formation characteristics of reaction-bonded silicon carbide by electrical discharge grinding technology.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3355, doi. 10.1007/s00170-024-13904-1

By:

Deng, Shibo;
Dai, Longzhou;
Wu, Mingtao

Publication type:

Article

Influence of laser beam process parameters on the bending ability of Ti-6Al-4V titanium alloy sheets.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3445, doi. 10.1007/s00170-024-13903-2

By:

Naqvi, Syed Mesum Raza;
Haidry, Azhar Ali;
Xie, Deqiao;
Ahmad, Shahzad;
Liu, Yang;
Chen, Ya;
Jiao, Chen;
Jamil, Muhammad;
Yan, Chongjing;
Shen, Lida

Publication type:

Article

A new surface roughness measurement method based on QR-SVM.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3987, doi. 10.1007/s00170-024-13898-w

By:

Yu, Xiaofeng;
Li, Zhengminqing;
Sheng, Wei;
Zhang, Chuanmei

Publication type:

Article

A novel powder addition method for preparing polylactic acid (PLA)-based composite with fused filament fabrication.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3513, doi. 10.1007/s00170-024-13897-x

By:

Pratama, Juan;
Suyitno;
Badranaya, Muhammad I.;
Adib, Adam Z.;
Wijaya, Rahman;
Sandi, Aris;
Salim, Urip A.;
Saptoadi, Harwin;
Arifvianto, Budi;
Mahardika, Muslim

Publication type:

Article