Works matching IS 02683768 AND DT 2023 AND VI 129 AND IP 7/8

Results: 61

Correction to: Submerged arc welding process: a numerical investigation of temperatures, displacements, and residual stresses in ASTM A516‑Gr70 corner joined samples.

Published in:

2023

By:

Conte, Romina;
Rodríguez Izquierdo, David;
Gagliardi, Francesco

Publication type:

Correction Notice

Comprehensive influence of ultrasonic vibration–assisted technology on material removal mechanism under the excitation of regenerative vibration in precision grinding process.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3645, doi. 10.1007/s00170-023-12571-y

By:

Chen, Yong;
Chen, Xun;
Hu, Zhongwei;
Duan, Nian

Publication type:

Article

Investigation of 300M ultra-high-strength steel deposited by wire-based gas metal arc additive manufacturing.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3751, doi. 10.1007/s00170-023-12566-9

By:

Wang, Jun;
Diao, Chenglei;
Taylor, Mark;
Wang, Chong;
Pickering, Ed;
Ding, Jialuo;
Pimentel, Misael;
Williams, Stewart

Publication type:

Article

A simple method for improving the tensile strength of fused filament fabrication part.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3513, doi. 10.1007/s00170-023-12565-w

By:

Kuo, Chil-Chyuan;
Xie, Zong-Ying;
Ke, Jun-Zhan;
Chen, Wei-Han;
Huang, Song-Hua

Publication type:

Article

Wire electrochemical contour evolution machining of gear involute artifact with horizontal electrode.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3577, doi. 10.1007/s00170-023-12559-8

By:

Wu, Xiaotong;
Ling, Siying;
Li, Chenxin;
Liu, Yong

Publication type:

Article

Welding characteristics of ultrasonic-assisted laser-MIG hybrid welding for AA6082-T6 aluminum alloy plate with different vibration modes.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3673, doi. 10.1007/s00170-023-12556-x

By:

Yang, Zhibin;
Zhao, Han;
Du, Lingzhi;
Wang, Xing

Publication type:

Article

Optimized infill density through topological optimization increases strength of additively manufactured porous polylactic acid.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3739, doi. 10.1007/s00170-023-12554-z

By:

Rilling, Samuel;
Ríos, Ignacio;
Gómez, Álvaro;
Valenzuela, Marian;
Oñate, Angelo;
Tuninetti, Víctor

Publication type:

Article

Estimating the cost of functional requirements for tolerance allocation on mechanical assemblies.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3695, doi. 10.1007/s00170-023-12551-2

By:

Armillotta, Antonio

Publication type:

Article

Numerical simulation and experimental research on submerged arc welding of stainless steel composite plate.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3627, doi. 10.1007/s00170-023-12550-3

By:

Yingying, Feng;
Enqiang, Xu;
Junfu, Zhou;
Xiaoqian, Sun;
An, Luo Zong

Publication type:

Article

Improving the thermo-physical behavior of Li2O-Al2O3-P2O5-SiO2 glass–ceramic system by triple-step heat treatment processes.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3447, doi. 10.1007/s00170-023-12547-y

By:

Nnakwo, Kingsley C.;
Amadi, Felix E.;
Aigbodion, Victor S.;
Ezeanyanwu, Johnson N.;
Nwogbu, Celestine C.;
Agbo, Alfred O.;
Okigbo, Emmanuel N.;
Daniel-Mkpume, Cynthia C.

Publication type:

Article

Enhancing dimensional accuracy in 3D printing: a novel software algorithm for real-time quality assessment.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3435, doi. 10.1007/s00170-023-12543-2

By:

Bowoto, Oluwole K.;
Zahedi, S. Abolfazl;
Chong, Seng

Publication type:

Article

Efficiency improvement of automated production line by conversion of subroutine configuration.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3537, doi. 10.1007/s00170-023-12542-3

By:

Chen, Po-Tuan;
Cheng, Yu-Lin

Publication type:

Article

In-process thermal imaging to detect internal features and defects in fused filament fabrication.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3475, doi. 10.1007/s00170-023-12535-2

By:

AbouelNour, Youssef;
Gupta, Nikhil

Publication type:

Article

Dissimilar interface and joint strength of SS 304 and titanium friction stir spot welds: a numerical and experimental analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3485, doi. 10.1007/s00170-023-12524-5

By:

Mishra, Neeraj K.;
Churasiya, Yogesh K.;
Shrivastava, Amber

Publication type:

Article

Data-driven analysis of temperature effects on interfacial bonding of carbon nanotube yarn composites.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3321, doi. 10.1007/s00170-023-12523-6

By:

De Leon, Ana V.;
Vanli, O. Arda;
Sweat, Rebekah D.

Publication type:

Article

Process parameters effect and porosity reduction on AlSi10Mg parts manufactured by selective laser melting.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3341, doi. 10.1007/s00170-023-12521-8

By:

Rios, July Andrea Taborda;
Zambrano-Robledo, Patricia;
Taborda, Juan Daniel Trejos;
Espinoza, Johan Andrés Gómez;
Isaza, Catalina Jaramillo;
Juárez-Hernández, Arturo

Publication type:

Article

Influence of control parameters on accuracy and reliability of the jet-dispensing process.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3713, doi. 10.1007/s00170-023-12537-0

By:

Nguyen, Duy-Khanh;
Fang, Te-Hua;
Fan, Yu-Cheng;
Huang, Ching-Chien;
Lin, Chu-Xun

Publication type:

Article

Integrating robotic wire arc additive manufacturing and machining: hybrid WAAM machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3247, doi. 10.1007/s00170-023-12517-4

By:

Li, Benquan;
Nagaraja, Kishore M.;
Zhang, Runyu;
Malik, Arif;
Lu, Hongbing;
Li, Wei

Publication type:

Article

Hybrid multi-response optimization and analysis of UFSW process using entropy measurement: effect of tool deviation on mechanical properties of an optimum joint.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3723, doi. 10.1007/s00170-023-12518-3

By:

Boukraa, Moustafa;
Chekifi, Tawfiq;
Madani, Tahar;
Aissani, Mouloud;
Benmalak, Toufik;
Settar, Abdelhakim;
Lebaal, Nadir

Publication type:

Article

Understanding the machining characteristics of Al6082 hybrid metal matrix composites milled under cryogenic cooling conditions.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3387, doi. 10.1007/s00170-023-12534-3

By:

Sivalingam, Vinothkumar;
Zhou, Qian;
Manickajothi, Ganesh;
Ross, Nimel Sworna;
Sun, Jie;
Gupta, Munish Kumar;
Korkmaz, Mehmet Erdi;
Nagamalai, Thangapandian

Publication type:

Article

High surface integrity machining of typical aviation difficult-to-machine material blade.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 2861, doi. 10.1007/s00170-023-12533-4

By:

Wu, Dongbo;
Liu, Shibo;
Wang, Hui

Publication type:

Article

Dynamic performance test for five-axis machine tools based on Scone trajectory using R-test device.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3549, doi. 10.1007/s00170-023-12532-5

By:

Osei, Seth;
Wang, Wei;
Yu, Jiahao;
Ding, Qicheng

Publication type:

Article

Material identification method for helical milling of CFRP/Ti stacks based on torque-speed model.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3659, doi. 10.1007/s00170-023-12531-6

By:

Yan, Chao;
Kang, Renke;
Meng, Fantong;
Dong, Zhigang;
Bao, Yan;
Yang, Guolin

Publication type:

Article

Electrochemical dissolution behavior and electrochemical jet machining characteristics of titanium alloy in high concentration salt solution.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3595, doi. 10.1007/s00170-023-12530-7

By:

Liu, Yang;
Ouyang, Pengfei;
Zhang, Zhaoyang;
Wang, Yufeng;
Zhu, Hao;
Xu, Kun

Publication type:

Article

Aerodynamic behavior and acoustic signature of propellers fabricated by additive manufacturing.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3403, doi. 10.1007/s00170-023-12529-0

By:

Chavez-Tolentino, Cesar;
Li, Xinrong;
Siller, Hector R.;
Sadat, Hamid

Publication type:

Article

Parametric effects of single-point incremental forming on the hardness of high carbon steel sheets.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3683, doi. 10.1007/s00170-023-12527-2

By:

Harfoush, Asmaa;
Haapala, Karl R.;
Ghamarian, Iman

Publication type:

Article

Influence of feed and cutting-edge radius on tool wear, surface roughness, and electric current in milling of VP20TS steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3609, doi. 10.1007/s00170-023-12526-3

By:

Barbosa, Marcos Guilherme Carvalho Braulio;
Hassui, Amauri;
de Oliveira, Patrick Abreu;
Borges, Wênio Fhará Alencar

Publication type:

Article

Design of intelligent manufacturing IoT sensing system for polymer process monitoring.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 2933, doi. 10.1007/s00170-023-12510-x

By:

Wang, Zhi-Hao;
Li, Yi-Ting;
Wu, Yu-Chan

Publication type:

Article

Anisotropic modeling of material behavior for additively manufactured parts made by material extrusion.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3453, doi. 10.1007/s00170-023-12508-5

By:

Molazadeh, Saba;
Diba, Fereydoon;
Hosseini, Ali

Publication type:

Article

Fast and accurate reduced-order modeling of a MOOSE-based additive manufacturing model with operator learning.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3123, doi. 10.1007/s00170-023-12471-1

By:

Yaseen, Mahmoud;
Yushu, Dewen;
German, Peter;
Wu, Xu

Publication type:

Article

Parametric study and response optimization for the wire + arc additive manufacturing of 316LSi via pulsed GMAW.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3073, doi. 10.1007/s00170-023-12470-2

By:

de Sousa Figueiredo, Guilherme Gadelha;
de Mello Picchi, Ivan Bezerra;
Lima dos Santos, Mathews;
López, Edwar Andrés Torres;
Oliveira, João Pedro;
de Abreu Santos, Tiago Felipe

Publication type:

Article

Microstructural evolution and mechanical properties of rapidly solidified thin-strip continuous cast AA5182 Al-Mg alloy under varying heat inputs in friction stir welding.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 2921, doi. 10.1007/s00170-023-12505-8

By:

Pouraliakbar, Hesam;
Aval, Hamed Jamshidi;
Howells, Andrew;
Gallerneault, Mark;
Fallah, Vahid

Publication type:

Article

Effect of spatial moving structure and topology optimization of the CNC turning machine tools.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 2969, doi. 10.1007/s00170-023-12500-z

By:

Chan, Tzu-Chi;
Reddy, Sabbella Veera Venkata Satyanarayana;
Ullah, Aman;
Roy, Bedanta

Publication type:

Article

A new configuration approach to support the technical bid solutions for complex ETO products under uncertainties.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3413, doi. 10.1007/s00170-023-12472-0

By:

Zhang, Haizhu;
Li, Rong;
Qin, Shengfeng;
Wang, Jian;
Zhu, Lifei

Publication type:

Article

Linking alloy thermo-physical behavior to laser process parameters for density optimization in LPBF.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3171, doi. 10.1007/s00170-023-12501-y

By:

Zhao, Rong;
Shmatok, Andrii;
Fischer, Ralf D.;
Prorok, Barton C.

Publication type:

Article

Joining of cemented carbides WC–Co and tool steel X153CrMoV12 with capacitor discharge welding process.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3155, doi. 10.1007/s00170-023-12494-8

By:

Stocks, Nicolas;
Kolaříková, Marie;
Chotěborský, Rostislav;
Vronka, Marek;
Kolařík, Ladislav

Publication type:

Article

A new automatic method for demoulding plastic parts using an intelligent robotic system.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3109, doi. 10.1007/s00170-023-12466-y

By:

Sánchez-Martínez, Daniel;
Jara, Carlos A.;
Gomez-Donoso, Francisco

Publication type:

Article

Enhancing mechanical properties of PLA and PP composites through ionic zeolite with copper nanoparticle reinforcement: microstructural and micromechanical characterization.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3375, doi. 10.1007/s00170-023-12499-3

By:

Oñate, Angelo;
Sáez-Llanos, Thyare;
Jaramillo, Andrés;
Vargas-Silva, Gustavo;
Meléndrez, Manuel;
Medina, Carlos

Publication type:

Article

Process parameter optimisation for selective laser melting of AlSi10Mg-316L multi-materials using machine learning method.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3093, doi. 10.1007/s00170-023-12489-5

By:

Miao, Huan;
Yusof, Farazila;
Karim, Mohd Sayuti Ab;
Badruddin, Irfan Anjum;
Hussien, Mohamed;
Kamangar, Sarfaraz;
Zhang, Hao

Publication type:

Article

Study on the heat input regulation mechanism of compound excitation device and its influence on arc shape and penetration behavior in GTAW.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3269, doi. 10.1007/s00170-023-12479-7

By:

Zhou, Wei;
Yue, Jianfeng;
Zhong, Pu;
Chen, Haojie;
Zhou, Hao

Publication type:

Article

Effects of internal coolant circulation-based cooling schemes on tool wear in turning SUS304 stainless steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3141, doi. 10.1007/s00170-023-12474-y

By:

Radchenko, Ilia;
Takahashi, Wataru;
Takahashi, Hidebumi;
Sasahara, Hiroyuki

Publication type:

Article

Multi-objective optimization of a cast-preform shape for a magnesium alloy forging application.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3221, doi. 10.1007/s00170-023-12478-8

By:

Kodippili, Tharindu;
Azqadan, Erfan;
Jahed, Hamid;
Lambert, Stephan;
Arami, Arash

Publication type:

Article

Studying the effects of coatings on the thermal protection of cutting tools during turning via a nonlinear inverse heat conduction problem.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3009, doi. 10.1007/s00170-023-12473-z

By:

Corrêa Ferreira, Diego;
Viana Avelar Dutra, Fernando;
Gustavo Dourado da Silva, Rodrigo;
Metrevelle Marcondes de Lima e Silva, Sandro;
Roberto Ferreira, João

Publication type:

Article

The machinability of titanium alloy thin-wall parts in cooling minimum quantity lubrication (CMQL) environments.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 2875, doi. 10.1007/s00170-023-12465-z

By:

Wu, Ge;
Mao, Xuanyu;
Pan, Wencheng;
Li, Guangxian;
Ding, Songlin

Publication type:

Article

A real-time intelligent method to identify mechanistic cutting force coefficients in 3-axis ball-end milling process using stochastic gradient decent: the mechanistic network.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 2949, doi. 10.1007/s00170-023-12460-4

By:

Forootan, Mahmoodreza;
Akbari, Javad;
Ghorbani, Mohammad

Publication type:

Article

Research on the characteristics of multi-channel discharge in wire electrical discharge machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3063, doi. 10.1007/s00170-023-12461-3

By:

Pan, Hongwei;
Liu, Zhidong;
Deng, Cong

Publication type:

Article

Intelligent surface roughness measurement using deep learning and computer vision: a promising approach for manufacturing quality control.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3261, doi. 10.1007/s00170-023-12457-z

By:

EL Ghadoui, Mohamed;
Mouchtachi, Ahmed;
Majdoul, Radouane

Publication type:

Article

Reference cage architecture for autonomous docking of mobile robots in automotive production systems.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3497, doi. 10.1007/s00170-023-12456-0

By:

Yilmaz, Abdurrahman;
Vit, Aycan Deniz;
Savci, Ismail Hakki;
Ocakli, Hakan;
Temeltas, Hakan

Publication type:

Article

A monitoring method for surface roughness of γ-TiAl alloy based on deep learning of time–frequency diagram.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 2989, doi. 10.1007/s00170-023-12453-3

By:

Wu, Yongxian;
Liu, Linyan;
Huang, Lei;
Wang, Zhenhua

Publication type:

Article

Calculation method for instantaneous shear energy efficiency and volume-energy ratio of milling cutter under multiple factors.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 2897, doi. 10.1007/s00170-023-12449-z

By:

Fan, Lili;
Jiang, Bin;
Zhao, Peiyi;
Wang, Bin

Publication type:

Article