Works matching IS 02683768 AND DT 2023 AND VI 128 AND IP 5/6

Results: 60

Machine learning models for online detection of wear and friction behaviour of biomedical graded stainless steel 316L under lubricating conditions.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2671, doi. 10.1007/s00170-023-12108-3

By:

Korkmaz, Mehmet Erdi;
Gupta, Munish Kumar;
Singh, Gurminder;
Kuntoğlu, Mustafa;
Patange, Abhishek;
Demirsoz, Recep;
Ross, Nimel Sworna;
Prasad, Brijesh

Publication type:

Article

A novel synchronous scanning strategy in laser powder bed fusion and effect on mechanical properties of industrial gears.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2459, doi. 10.1007/s00170-023-12109-2

By:

Çalışkan, Cemal İrfan

Publication type:

Article

Development and characterization of Ni60 alloy and SiC ceramic reinforced metal matrix composite coating on Ti-6Al-4V using laser cladding with coaxial powder feeding system.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2705, doi. 10.1007/s00170-023-12103-8

By:

Wang, Huan;
Shin, Ki-Hoon;
Kim, Hong Seok

Publication type:

Article

Friction welding parameter for AA6063 using ANFIS prediction.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2589, doi. 10.1007/s00170-023-12106-5

By:

Kunhirunbawon, Siridech;
Suwichien, Narisara;
Jantarasricha, Tanakorn

Publication type:

Article

Modified Fusing-and-Filling Generative Adversarial Network–based few-shot image generation for GMAW defect detection using multi-sensor monitoring system.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2753, doi. 10.1007/s00170-023-12096-4

By:

Zhu, Kanghong;
Chen, Weiguang;
Hou, Zhen;
Wang, Qingzhao;
Chen, Huabin

Publication type:

Article

Laser welding for 30Cr3 ultra-high-strength steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2639, doi. 10.1007/s00170-023-12092-8

By:

Feng, Jiecai;
Liu, Shulei;
Zhu, Lijian;
Xia, Ling;
Jiang, Meng;
Liu, Hongfei;
Tian, Yingzhong;
Zou, Xingli

Publication type:

Article

Effect of interference and form defect on the cohesion of the shrink-fit assembly.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2407, doi. 10.1007/s00170-023-12099-1

By:

Bedlaoui, Allal;
Boutoutaou, Hamid

Publication type:

Article

Fatigue analysis of additively manufactured short carbon fiber-reinforced PETG Components.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2377, doi. 10.1007/s00170-023-12107-4

By:

Rajeshirke, Mithila;
Alkunte, Suhas;
Huseynov, Orkhan;
Fidan, Ismail

Publication type:

Article

Experiments and analysis for accurate controlling of an ultra-microvolume adhesive droplet in dispensing.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2271, doi. 10.1007/s00170-023-12097-3

By:

Liu, Huifang;
Zhao, Dingrui;
Chen, Xi;
Chang, Yunlong;
Yu, Xingfu;
Li, An

Publication type:

Article

Microstructural damage during electrical discharge machining of a high silicon aluminum alloy for space applications.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2311, doi. 10.1007/s00170-023-12084-8

By:

Bédard, Frédéric;
Loucif, Abdelhalim;
Jahazi, Mohammad;
Songmene, Victor

Publication type:

Article

Modeling and simulation of material removal characteristics in magnetorheological shear thickening polishing.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2319, doi. 10.1007/s00170-023-12093-7

By:

Ma, Zhen;
Tian, Yebing;
Qian, Cheng;
Ahmad, Shadab;
Fan, Zenghua;
Sun, Zhiguang

Publication type:

Article

Numerical analysis of face sheet/core debonding failure in the plastic forming of aluminum foam sandwich panel.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2285, doi. 10.1007/s00170-023-12087-5

By:

Zhang, Xi;
Cai, Zhong-yi;
Gao, Jia-xin;
Wang, Ming-wei

Publication type:

Article

Size effect of laser shock sheet bulk microforging.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2719, doi. 10.1007/s00170-023-12094-6

By:

Hou, Xin;
Ma, Youjuan;
Wang, Xiao;
Shen, Wenkai;
Cui, Maomao;
Liu, Huixia

Publication type:

Article

Tribological and machining characteristics of milling SiCp/Al MMC composites under sustainable cooling conditions.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2613, doi. 10.1007/s00170-023-12083-9

By:

Laghari, Rashid Ali;
He, Ning;
Jamil, Muhammad;
Gupta, Munish Kumar

Publication type:

Article

A monocular-based tracking framework for industrial augmented reality applications.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2571, doi. 10.1007/s00170-023-12082-w

By:

Yang, Xu;
Cai, Junqi;
Li, Kunbo;
Fan, Xiumin;
Cao, Hengling

Publication type:

Article

Numerical simulation optimization of a magnetic system structure for magnetic field hybrid wire-arc DED.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2251, doi. 10.1007/s00170-023-12091-9

By:

Li, Yiwen;
Miao, Junyan;
Zhang, Siyu;
Zhao, Honglei;
Chang, Chenhe;
Chang, Yunlong

Publication type:

Article

A multi-objective modeling and optimization method for high efficiency, low energy, and economy.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2483, doi. 10.1007/s00170-023-12088-4

By:

Jiang, Wenxiang;
Lv, Lishu;
Xiao, Yao;
Fu, Xiaojing;
Deng, Zhaohui;
Yue, Wenhui

Publication type:

Article

Study on formability and deformation behavior of friction stir welding AA2024-7075 joint.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2689, doi. 10.1007/s00170-023-12081-x

By:

Xu, Wenbin;
Zhang, Jiaheng;
Pang, Qiu;
Hu, Zhi-li

Publication type:

Article

The effect of the diode laser beam power on the behaviour of the ZrC powder pre-coat and the 145Cr6 steel substrate during laser processing.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2105, doi. 10.1007/s00170-023-12064-y

By:

Bartkowski, Dariusz;
Bartkowska, Aneta;
Jurči, Peter;
Kusý, Martin;
Przestacki, Damian;
Ulbrich, Dariusz

Publication type:

Article

Modified shaving die for shaving thick sheet metal.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2469, doi. 10.1007/s00170-023-12075-9

By:

Sontamino, Arkarapon;
Thipprakmas, Sutasn

Publication type:

Article

Decision tree predictive model for dimensional control of side flange bearing housings.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2147, doi. 10.1007/s00170-023-12071-z

By:

Soares, Rafael G.;
Dalpra, Gabriella C. B. C.;
Silva, Alisson M.

Publication type:

Article

Improvement of fatigue performance by applying tandem GMAW in lap joints with gaps.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2123, doi. 10.1007/s00170-023-12057-x

By:

Kim, Dong-Yoon;
Kim, Gwang-Gook;
Yu, Jiyoung;
Kim, Dongcheol;
Kim, Young-Min;
Park, Junhong

Publication type:

Article

Aluminium deep drawing with additive manufacturing polymer punches: analysis of performance in small batch production.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2175, doi. 10.1007/s00170-023-12066-w

By:

Giorleo, Luca;
Ceretti, Elisabetta

Publication type:

Article

Effect of layer-by-layer laser remelting process on the microstructure and performance of selective laser melting 316L stainless steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2221, doi. 10.1007/s00170-023-12078-6

By:

Chen, Xuehui;
Wen, Kai;
Mu, Weihao;
Zhang, Yuxi;
Huang, Shan;
Liu, Wei

Publication type:

Article

Optimized design of indexable insert drill based on radial cutting force balance.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2029, doi. 10.1007/s00170-023-12063-z

By:

Jiang, Aisheng;
Liu, Zhanqiang;
Wang, Shequan;
Wen, Juan;
Li, Yi;
Zhao, Jinfu

Publication type:

Article

X-ray observation study of the influence of binder deposition on sintering process of aluminum binder jetting.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 1981, doi. 10.1007/s00170-023-12058-w

By:

Yamaguchi, Daichi;
Oya, Naoki

Publication type:

Article

Improving surface and dimensional quality with an additive manufacturing-based hybrid technique.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 1957, doi. 10.1007/s00170-023-12055-z

By:

Mertkan, İsmail Ata;
Tezel, Tuğçe;
Kovan, Volkan

Publication type:

Article

Friction stir welding of aluminum to titanium: quest for optimum tool-offset, deformation of titanium, and mechanism of joint formation.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 1943, doi. 10.1007/s00170-023-12065-x

By:

Kar, Amlan;
Kailas, Satish V.;
Suwas, Satyam

Publication type:

Article

Determination method of stable grasping parameters for irregular sheet sorting.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2075, doi. 10.1007/s00170-023-12052-2

By:

Zhang, Sen;
Zhang, Yansong

Publication type:

Article

Susceptibility of adiabatic shear band formation in AZ31B magnesium alloy during high strain rate impact.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2161, doi. 10.1007/s00170-023-12049-x

By:

Tetteh, Francis;
Duntu, Solomon Hanson;
Boakye-Yiadom, Solomon

Publication type:

Article

Infrared in-line monitoring of flaws in steel welded joints: a preliminary approach with SMAW and GMAW processes.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2655, doi. 10.1007/s00170-023-12044-2

By:

Santoro, Luca;
Sesana, Raffaella;
Molica Nardo, Rosario;
Curá, Francesca

Publication type:

Article

Research on surface integrity of Inconel 718 with various ultrasonic ball-end milling times.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2187, doi. 10.1007/s00170-023-12042-4

By:

Yin, Xiaoming;
Yang, Shenliang;
Li, Xun;
Zhang, Deyuan

Publication type:

Article

Study on the removal mechanism in multi-abrasive micro-grinding of nickel-based superalloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2199, doi. 10.1007/s00170-023-12040-6

By:

Chen, Minghui;
Cai, Ming;
Gong, Yadong;
Zhu, Tao;
Gong, Qiang;
Liu, Yu

Publication type:

Article

A thermal error modeling method for CNC lathes based on thermal distortion decoupling and nonlinear programming.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2599, doi. 10.1007/s00170-023-12038-0

By:

Du, Hongyang;
Jiang, Gedong;
Tao, Tao;
Hou, Ruisheng;
Yan, Zongzhuo;
Mei, Xuesong

Publication type:

Article

On-line evolutionary identification technology for milling chatter of thin walled parts based on the incremental-sparse K-means and the online sequential extreme learning machine.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2001, doi. 10.1007/s00170-023-12030-8

By:

Wang, Zhixue;
Yue, Caixu;
Liu, Xianli;
Li, Maoyue;
Meng, Boyang;
Yong, Liying

Publication type:

Article

Prediction of the fatigue curve of high-strength steel resistance spot welding joints by finite element analysis and machine learning.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2763, doi. 10.1007/s00170-023-11993-y

By:

Yu, Zhengxiao;
Ma, Ninshu;
Murakawa, Hidekazu;
Watanabe, Goro;
Liu, Mingyao;
Ma, Yunwu

Publication type:

Article

Investigation on deformation characteristic of electromagnetic punching process in AA5182 aluminum alloy sheet.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2347, doi. 10.1007/s00170-023-12037-1

By:

Duan, Liming;
Hong, Zhibo;
Dong, Dongying;
Cui, Junjia;
Li, Guangyao;
Jiang, Hao

Publication type:

Article

Pre-deformation effect on the hot deformation behavior and microstructure of AA6011 tube: experimentation and modelling.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2395, doi. 10.1007/s00170-023-12036-2

By:

Bao, Zhennan;
Qu, Shuguang;
Liang, Jiayu;
Yang, Song;
Zheng, Kailun;
Fu, Kunning;
He, Zhubin

Publication type:

Article

Milling performance of cryogenic cooled titanium alloy thin-walled parts based on cantilever sheet.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2261, doi. 10.1007/s00170-023-11987-w

By:

Wang, Fengbiao;
Wang, Yongqing

Publication type:

Article

A novel method to minimize the five-axis CNC machining error around singular points based on closed-loop inverse kinematics.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2237, doi. 10.1007/s00170-023-11991-0

By:

Lu, Zehong;
Huo, Guanying;
Jiang, Xin

Publication type:

Article

Analysis of manufacturing and material parameters in 3D-printed polylactic acid (PLA) parts filled with glass powder: mechanical, economic, and environmental assessment.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 1965, doi. 10.1007/s00170-023-12023-7

By:

Castanon-Jano, Laura;
Palomera-Obregon, Paula;
Blanco-Fernandez, Elena;
Indacoechea-Vega, Irune

Publication type:

Article

Investigating the impact of yield criteria and process parameters on fracture height of cylindrical cups in the deep drawing process of SPCC sheet steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2059, doi. 10.1007/s00170-023-12022-8

By:

Luyen, The-Thanh;
Mac, Thi-Bich;
Banh, Tien-Long;
Nguyen, Duc-Toan

Publication type:

Article

Correspondence measure: a review for the digital twin standardization.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 1907, doi. 10.1007/s00170-023-12019-3

By:

Khan, Tarique Hasan;
Noh, Chiho;
Han, Soonhung

Publication type:

Article

Improving surface integrity by optimizing slide diamond burnishing parameters after hard turning of 42CrMo4 steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2087, doi. 10.1007/s00170-023-12008-6

By:

Zaghal, Jawad;
Molnár, Viktor;
Benke, Márton

Publication type:

Article

Characterization of cold metal transfer and conventional short-circuit gas metal arc welding processes for depositing tungsten carbide-reinforced metal matrix composite overlays.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2551, doi. 10.1007/s00170-023-11955-4

By:

Karimi, Mohammad Reza;
Wang, Sheng-Hui;
Jelovica, Jasmin

Publication type:

Article

NSGA-III-based multi-objective approach for reconfigurable manufacturing system design considering single-spindle and multi-spindle modular reconfigurable machines.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2499, doi. 10.1007/s00170-023-11847-7

By:

Ameer, Muhammad;
Dahane, Mohammed

Publication type:

Article

Evaluation of milling performance of 50-μm D-shaped carbide tool, polycrystalline diamond-coated carbide tool, and polycrystalline diamond tool.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 1991, doi. 10.1007/s00170-023-11929-6

By:

Jiang, Jin Xin;
Jiang, Chen;
Gao, Rui;
Hao, Yu

Publication type:

Article

A 3D coupled thermo-mechanical model of laser-assisted machining of Ti-6Al-4V: forces, temperature, and tool wear analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2739, doi. 10.1007/s00170-023-11978-x

By:

Divse, Vishwas;
Dubey, Amit;
Thomas, Vimal;
Joshi, Suhas;
Marla, Deepak

Publication type:

Article

Research on pitting control technology of titanium alloy cascade trepanning electrochemical machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2781, doi. 10.1007/s00170-023-11969-y

By:

Jia, Jianli;
Xu, Jiang;
Pang, Yanhaotian;
Xu, Tianci;
Li, Shengchen;
Hao, Yajing

Publication type:

Article

On the potential of low-cost instrumentation for digitalization of legacy machine tools.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 1929, doi. 10.1007/s00170-023-11946-5

By:

Durigan, Paulo de Tarso;
Shiki, Sidney Bruce;
Barbosa, Gustavo Franco;
Antonialli, Armando Ítalo Sette

Publication type:

Article