Works matching IS 02683768 AND DT 2023 AND VI 127 AND IP 7/8

Results: 62

Correction to: Cu donor material assisted friction stir welding of AA2024 and AA6061 dissimilar alloys: Effect on downward force, temperature profile, and mechanical properties.

Published in:

2023

By:

Bhukya, Srinivasa Naik;
Wu, Zhenhua;
Elmustafa, Abdelmageed;
Al‑Allaq, Aiman;
Ojha, Manish;
Mohammed, Yousuf

Publication type:

Correction Notice

Correction to: A review on theories/methods to obtain surface topography and analysis of corresponding affecting factors in the milling process.

Published in:

2023

By:

Sun, Yuwen;
Liu, Yang;
Zheng, Meng;
Xu, Jinting;
Guo, Qiang

Publication type:

Correction Notice

Performance assessment of ultrathin sapphire wafer polishing with layer stacked clamping (LSC) method.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3761, doi. 10.1007/s00170-023-11781-8

By:

Chen, Zhixiang;
Han, Shunkai;
Feng, Ming;
Chen, Hongyu;
Zhang, Xianglei

Publication type:

Article

Comparative evaluation of AC and DC TIG-welded 5083 aluminium plates of different thickness.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3789, doi. 10.1007/s00170-023-11779-2

By:

Bendikiene, Regita;
Sertvytis, Rolandas;
Ciuplys, Antanas

Publication type:

Article

Cu donor material assisted friction stir welding of AA2024 and AA6061 dissimilar alloys: Effect on downward force, temperature profile, and mechanical properties.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3839, doi. 10.1007/s00170-023-11778-3

By:

Bhukya, Srinivasa Naik;
Wu, Zhenhua;
Elmustafa, Abdelmageed;
Al-Allaq, Aiman;
Ojha, Manish;
Mohammed, Yousuf

Publication type:

Article

Post-processing of a nine-axis and five-linkage turn-milling compound machine tool.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3935, doi. 10.1007/s00170-023-11777-4

By:

Wei, Wei;
Tang, Qingchun;
Zhang, Chenyang;
Wang, Taizi;
Pan, Yingguang;
Wang, Yutao

Publication type:

Article

Process chain for the mass production of polymeric microfluidic chips.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3665, doi. 10.1007/s00170-023-11773-8

By:

Lu, Yanjun;
Liu, Bo;
Zhang, Zili;
Guo, Mingrong;
Wang, Jianjian;
Wang, Chunjin

Publication type:

Article

Surface modification of aluminum alloy by wire electrical discharge machining with SiC nanofluid dielectric.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3525, doi. 10.1007/s00170-023-11771-w

By:

Guo, Cuixia;
Wang, Xing;
Xie, Wenling;
Lai, Sheng

Publication type:

Article

High-accuracy DLP 3D printing of closed microfluidic channels based on a mask option strategy.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 4001, doi. 10.1007/s00170-023-11769-4

By:

Yu, Zhengdong;
Li, Xiangqin;
Zuo, Tongxing;
Wang, Qianglong;
Wang, Huan;
Liu, Zhenyu

Publication type:

Article

Significant step towards efficient electrical discharge machining titanium alloys.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3905, doi. 10.1007/s00170-023-11767-6

By:

Zhou, Ming;
Hu, Tianshang;
Mu, Xin;
Zhao, Meng;
JianweiYang;
Ye, Qing;
Xu, Pei;
Yang, Lei;
Xin, Fangqing

Publication type:

Article

Investigation of the impact of the short fiber reinforcements on the thermal and mechanical properties of polymer-based composites manufactured by material extrusion.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3801, doi. 10.1007/s00170-023-11758-7

By:

Ahmadifar, Mohammad;
Shirinbayan, Mohammadali;
Benfriha, Khaled

Publication type:

Article

Energy analysis of the extrusion process through a streamlined Gaussian die.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3715, doi. 10.1007/s00170-023-11757-8

By:

Zhang, Shun Hu;
Zhang, Yi;
Liu, Xin Ying

Publication type:

Article

Offline fast modification of position loop gains for five-axis machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3951, doi. 10.1007/s00170-023-11756-9

By:

Lyu, Dun;
Ye, Xinxin;
Zhang, Huijie;
Liu, Hui

Publication type:

Article

Digital twin for energy-efficient integrated process planning and scheduling.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3819, doi. 10.1007/s00170-023-11755-w

By:

Sun, Mengke;
Cai, Zongyan;
Yang, Caoyuan;
Zhang, Haonan

Publication type:

Article

Deep learning-based sustainable subsurface anomaly detection in Barker-coded thermal wave imaging.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3625, doi. 10.1007/s00170-023-11753-y

By:

Parvez, Muzammil;
Mohammad, Ali Baig;
Ghali, Venkata Subba Rao;
Yadav, Gampa Chandra Sekhar;
Vesala, Gopi Tilak;
Lakshmi, Atala Vijaya;
Alagarsamy, Aravindhan;
Palanisamy, Sivasubramanian;
Kechagias, John;
Santulli, Carlo

Publication type:

Article

Microstructure evolution, hardness response, and corrosion resistance of Inconel 625 weld overlay obtained by the ESSC process after post-welding heat treatments.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3357, doi. 10.1007/s00170-023-11752-z

By:

Lourenço, Manuel J. C.;
Jorge, Jorge C. F.;
de Souza, Luís Felipe G.;
Mendes, Matheus C.;
Farneze, Humberto N.;
Araújo, Leonardo S.

Publication type:

Article

Effects of silicon concentration on the magnetic and structural properties of nanostructured Fe-Si alloy synthesized by ball mill process.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3655, doi. 10.1007/s00170-023-11748-9

By:

Ouadah, M'hamed;
Younes, Abderrahmane

Publication type:

Article

Assessment of turning AISI 316L stainless steel under MWCNT-reinforced nanofluid-assisted MQL and optimization of process parameters by NSGA-II and TOPSIS.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3855, doi. 10.1007/s00170-023-11747-w

By:

Oussama, Benkhelifa;
Yapan, Yusuf Furkan;
Uysal, Alper;
Abdelhakim, Cherfia;
Mourad, Nouioua

Publication type:

Article

A comprehensive study of the flexural behaviour and damage evolution of composite laminates using a progressive failure model.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3869, doi. 10.1007/s00170-023-11746-x

By:

El Idrissi, Hamza;
Seddouki, Abbass

Publication type:

Article

Process monitoring of the AISI D6 steel turning using artificial neural networks.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3569, doi. 10.1007/s00170-023-11745-y

By:

Rubin, Victor Hugo Serafim;
da Silva, Leonardo Rosa Ribeiro;
Okada, Kenji Fabiano Ávila;
de Souza, Felipe Chagas Rodrigues;
Pimenov, Danil Yurievich;
Gravalos, Marcio Tadeu;
Machado, Alisson Rocha

Publication type:

Article

Oxide film thickness and composite mechanical properties of an ultrasonic-assisted ELID cast-iron-bonded grinding wheel.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3891, doi. 10.1007/s00170-023-11744-z

By:

Ji, Bin;
Wu, Huaichao;
Yang, Lv;
Liu, Chong;
Cao, Gang;
Sun, Haibo

Publication type:

Article

New linkage control methods based on the trajectory distribution of galvanometer and mechanical servo system for large-range high-feedrate laser processing.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3397, doi. 10.1007/s00170-023-11743-0

By:

Wang, Xintian;
Mei, Xuesong;
Liu, Bin;
Sun, Zheng;
Dong, Zhuobo

Publication type:

Article

Formation mechanism of CFRP pipe concave drilling defects.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3557, doi. 10.1007/s00170-023-11741-2

By:

Qiu, Xinyi;
Li, Pengnan;
Tang, Lingyan;
Li, Changping;
Xiang, Lintao;
Li, Shujian;
Tang, Siwen;
Ko, Tae Jo

Publication type:

Article

Investigation on cutting damage mechanism of carbon fiber reinforced polymer based on macro/microscopic simulation.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3585, doi. 10.1007/s00170-023-11739-w

By:

Zhu, Zhaoju;
Kang, Rongqing;
Huang, Jianwei;
Zhu, Yunqi;
Sun, Xinhui

Publication type:

Article

Prediction model of part topography in curved surface inkjet 3D printing.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3371, doi. 10.1007/s00170-023-11736-z

By:

Ping, Bu;
Huang, Jin;
Meng, Fanbo

Publication type:

Article

Influence mechanisms of tool geometry parameters on surface quality and subsurface damage in polycrystalline NiFeCr superalloys.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3637, doi. 10.1007/s00170-023-11730-5

By:

Jiang, Junqiang;
Sun, Lihui;
Ma, Hongwei;
Liu, Shengyong

Publication type:

Article

Tool wear mechanisms of PCD micro end mill in machining of additive manufactured titanium alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3269, doi. 10.1007/s00170-023-11729-y

By:

Chen, Zhongwei;
Wu, Xian;
Ke, Wenchang;
Shen, Jianyun;
Jiang, Feng;
Zhu, Laifa;
Fang, Congfu

Publication type:

Article

Semantic segmentation of end mill wear area based on transfer learning with small dataset.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3599, doi. 10.1007/s00170-023-11725-2

By:

Chen, Chang;
Lin, Chen;
Meng, Zhen;
Ni, Jing;
Sun, Jiteng;
Li, Zuji

Publication type:

Article

Effect of surface topography of fiber laser dressed resin-bond diamond wheel on its grinding performance.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3427, doi. 10.1007/s00170-023-11724-3

By:

Luo, Fengrong;
Ren, Yinghui;
Chen, Genyu;
Zhou, Wei;
Hu, Bang;
Wang, Yanyi;
Li, Mingquan

Publication type:

Article

A review on theories/methods to obtain surface topography and analysis of corresponding affecting factors in the milling process.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3097, doi. 10.1007/s00170-023-11723-4

By:

Sun, Yuwen;
Liu, Yang;
Zheng, Meng;
Xu, Jinting;
Guo, Qiang

Publication type:

Article

Surface polishing of additively manufactured Ti6Al4V titanium alloy by using a nanosecond pulse laser.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3463, doi. 10.1007/s00170-023-11722-5

By:

Jaritngam, Pakin;
Saetang, Viboon;
Qi, Huan;
Dumkum, Chaiya

Publication type:

Article

Optimizing process parameters of a material extrusion–based overprinting technique for the fabrication of tensile specimens.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3513, doi. 10.1007/s00170-023-11720-7

By:

Gong, Ke;
Liu, Handai;
Xu, Han;
Coyne, Joseph;
Cao, Zhi;
Fuenmayor, Evert;
Major, Ian

Publication type:

Article

A novel deflection control method for the asymmetric thin-walled component by optimizing the feed rate of the finishing process.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3385, doi. 10.1007/s00170-023-11718-1

By:

Zhang, Zhongxi;
Wang, Longhao;
Wang, Shuaiqin;
Zhang, Dinghua;
Jiang, Aituan

Publication type:

Article

Prediction of residual stress, surface roughness, and grain refinement of 42CrMo steel subjected to shot peening by combining finite element method and artificial neural network.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3441, doi. 10.1007/s00170-023-11716-3

By:

Huang, Haiquan;
Wang, Senhui;
Wang, Cheng;
Li, Kun;
Zhou, Yijun;
Wang, Xiaogui

Publication type:

Article

Influence of uncertain parameters on machining distortion of thin-walled parts.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3773, doi. 10.1007/s00170-023-11713-6

By:

Li, Xiaoyue;
Qi, Hao;
Tao, Qiang;
Li, Liang

Publication type:

Article

Recent research progress of foam metals welding: a review.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3135, doi. 10.1007/s00170-023-11709-2

By:

Feng, Mengnan;
Ren, Liang;
Wang, Ziyao;
Meng, Dequan;
Wang, Shuo;
Wang, Peng

Publication type:

Article

Influence of extrusion method on the microstructure and mechanical properties of formed magnesium alloy tubes.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3979, doi. 10.1007/s00170-023-11708-3

By:

Zhao, Hui;
Hu, Hong-jun;
Liang, Peng-cheng

Publication type:

Article

Positioning of a conical cutter for centrifugal blade finish machining based on the best uniform approximation (BUA) method.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3209, doi. 10.1007/s00170-023-11706-5

By:

Dong, Lei

Publication type:

Article

Bayesian diagnostic learning for a costly composite manufacturing: critical role of dataset size and auxiliary in situ measurements.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3729, doi. 10.1007/s00170-023-11705-6

By:

Crawford, Bryn;
Ramezankhani, Milad;
Milani, Abbas S.

Publication type:

Article

The effect of process parameters on the stability and efficiency in the laser powder bed fusion of Ti-6Al-4 V based on the interval powder layer thickness.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3537, doi. 10.1007/s00170-023-11704-7

By:

Wang, Peng;
Chen, Dongju;
Tang, Yuhang;
Fan, Jinwei;
Li, Gang

Publication type:

Article

Effects of energy density on the mechanical properties, residual stress, and fatigue damage of Fe-Cr alloy fabricated by laser-directed energy deposition.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3965, doi. 10.1007/s00170-023-11703-8

By:

Yue, Haitao;
Lv, Ning;
Guo, Chenguang;
Zhao, Lijuan;
Jiang, Yihan;
Dai, Weibing;
Li, Qiang;
Zhang, Jianzhuo

Publication type:

Article

Research solution for automatic hole quality analysis when drilling fiber-reinforced composites.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3315, doi. 10.1007/s00170-023-11696-4

By:

Hrechuk, Andrii;
Hörndahl, Mikael;
Schultheiss, Fredrik

Publication type:

Article

Establishing Equal-Channel Angular Pressing (ECAP) for sheet metals by using backpressure: manufacturing of high-strength aluminum AA5083 sheets.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3481, doi. 10.1007/s00170-023-11692-8

By:

Gruber, Maximilian;
Illgen, Christian;
Lichte, Felix;
Hartmann, Christoph;
Frint, Philipp;
Wagner, Martin F.-X.;
Volk, Wolfram

Publication type:

Article

Morphology and wettability analysis of square micropillar structure prepared by laser-belt machining on Inconel 718 alloy surface.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3919, doi. 10.1007/s00170-023-11687-5

By:

Huang, Yun;
Huang, Jianchao;
Xiao, Guijian;
Lin, Ouchuan;
Liu, Shuai;
Liu, Zhenyang;
Wu, Chongjun

Publication type:

Article

Theoretical and experimental investigations of tool wear in ultrasonic vibration–assisted turning of 304 austenitic stainless steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3157, doi. 10.1007/s00170-023-11686-6

By:

Xu, Yingshuai;
Zhang, Jie;
Zhang, Qinjian;
Huang, Shufeng;
Wu, Yihan;
He, Jing

Publication type:

Article

Exploring the mechanics of adhesion in metal cutting.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3337, doi. 10.1007/s00170-023-11681-x

By:

Svenningsson, Inge;
Tatar, Kourosh

Publication type:

Article

A simulation method for the optimization of cooling water slot structure in slab continuous casting mold combined with submerged entry nozzle.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3221, doi. 10.1007/s00170-023-11671-z

By:

Om, Sang Chol;
Kim, Dong Gil;
Pak, Chung Il;
Kim, Hak Yong;
Kim, Il Un

Publication type:

Article

In situ embedment of type K sheathed thermocouples with directed energy deposition.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3611, doi. 10.1007/s00170-023-11624-6

By:

Nuñez III, Luis;
Sabharwall, Piyush;
van Rooyen, Isabella J.

Publication type:

Article

Advanced 3D additive manufacturing techniques for revolutionizing the next-generation rocket engine nozzle fabrication.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3747, doi. 10.1007/s00170-023-11669-7

By:

Thomas, Daniel J.

Publication type:

Article

Impact damage prediction of CFRP laminates with rubber protective layer using back-propagation neural networks.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3281, doi. 10.1007/s00170-023-11647-z

By:

Li, Ximing;
Liu, Ping;
Cheng, Hui;
Li, Yuan;
Liu, Chinan;
Zhang, Kaifu

Publication type:

Article