Works matching IS 02683768 AND DT 2023 AND VI 127 AND IP 1/2

Results: 62

Research status and development trend of cutting surface integrity of aerospace alloy materials.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 45, doi. 10.1007/s00170-023-11558-z

By:

Liu, Jie;
Chen, Guangjun;
Zhao, Lixiang;
Yu, Zhiwei;
Jia, Xiongfei

Publication type:

Article

Experimental and numerical investigation on temperature field and joint tensile failure for CF/PPS-Al alloy interlocking induction welding.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 795, doi. 10.1007/s00170-023-11554-3

By:

Qin, Xuda;
Wang, Chenyue;
Li, Hao;
Meng, Xianming;
Yu, Tian;
Liu, Haitao

Publication type:

Article

Study on magnetic pulse crimping process for joining large-diameter aluminum alloy tube/magnesium alloy shaft.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 527, doi. 10.1007/s00170-023-11555-2

By:

Chen, Chang;
Han, Zichuan;
Cui, Junjia;
Li, Guangyao;
Jiang, Hao

Publication type:

Article

Correction to: Surface quality investigation in surfactant‑based EDM of Inconel 617 using deep cryogenically treated electrodes.

Published in:

2023

By:

Ishfaq, Kashif;
Sana, Muhammad;
Waseem, Muhammad Umair;
Anwar, Saqib;
Alfaify, Abdullah Yahia;
Zia, Abdul Wasy

Publication type:

Correction Notice

The effect of chip formation on the cutting force and tool wear in high-speed milling Inconel 718.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 335, doi. 10.1007/s00170-023-11551-6

By:

Zhang, Guoqing;
Zhang, Jingjie;
Fan, Guanghui;
Xu, Chonghai;
Du, Jin

Publication type:

Article

Correction to: Speed and torque control of pneumatic motors using controlled pulsating flow.

Published in:

2023

By:

Aziz, Mohamed A.;
Benini, Ernesto;
Elsayed, Mostafa E. A.;
Khalifa, Mohamed A.;
Gaheen, Osama A.

Publication type:

Correction Notice

Tolerance analysis by static analogy on 2D assemblies with fits and fasteners.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 507, doi. 10.1007/s00170-023-11536-5

By:

Armillotta, Antonio

Publication type:

Article

Potential of the KOBO extrusion process for nonferrous metals in the form of solids and chips.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 733, doi. 10.1007/s00170-023-11596-7

By:

Bochniak, Włodzimierz;
Ostachowski, Paweł;
Korbel, Andrzej;
Łagoda, Marek

Publication type:

Article

A novel flushing technique to improve micro-EDM dressing process stability: assessment through analyzing debris evacuation.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 775, doi. 10.1007/s00170-023-11594-9

By:

Shah, Md Shamim;
Gupta, Deepa;
Saha, Probir;
Assam, Ashwani;
Sarkar, Chiranjit

Publication type:

Article

Effect of porosity on the quality of 3D printed structures.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 899, doi. 10.1007/s00170-023-11592-x

By:

Jhunjhunwala, Pranav;
Gupta, Ankit

Publication type:

Article

Surface quality investigation in surfactant-based EDM of Inconel 617 using deep cryogenically treated electrodes.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 861, doi. 10.1007/s00170-023-11588-7

By:

Ishfaq, Kashif;
Sana, Muhammad;
Waseem, Muhammad Umair;
Anwar, Saqib;
Alfaify, Abdullah Yahia;
Zia, Abdul Wasy

Publication type:

Article

Qualify a NIR camera to detect thermal deviation during aluminum WAAM.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 625, doi. 10.1007/s00170-023-11587-8

By:

Dellarre, Anthony;
Béraud, Nicolas;
Tardif, Nicolas;
Vignat, Frédéric;
Villeneuve, François;
Limousin, Maxime

Publication type:

Article

Laser-powder bed fusion molds without post-processing for micro-injection molding of mini/micro-products.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 677, doi. 10.1007/s00170-023-11585-w

By:

Surace, Rossella;
Errico, Vito;
Valori, Marcello;
Fassi, Irene;
Campanelli, Sabina Luisa

Publication type:

Article

Dimensional and geometrical deviations of an assembly with a lattice structure manufactured by a material extrusion process: numerical and experimental results.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 689, doi. 10.1007/s00170-023-11579-8

By:

Polini, Wilma;
Corrado, Andrea

Publication type:

Article

Influence of the hydraulic press system on advanced high-strength steel formability.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 615, doi. 10.1007/s00170-023-11578-9

By:

de Lima, Edimar;
do Nascimento Cruz, Murilo;
Filho, Ravilson Antonio Chemin;
Nikhare, Chetan P.;
Marcondes, Paulo Victor Prestes

Publication type:

Article

A methodology for multipass gas metal arc welding of shipbuilding steel plates with different thicknesses.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 751, doi. 10.1007/s00170-023-11575-y

By:

Dias, João Marcos Souza;
dos Santos Paes, Luiz Eduardo;
Santos, Arthur Gustavo Moreira;
Borba, Tadeu Messias Donizete;
da Paixão Carvalho, Leonardo;
Vilarinho, Louriel Oliveira

Publication type:

Article

Shape memory performance assessment of FDM 3D printed PLA-TPU composites by Box-Behnken response surface methodology.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 935, doi. 10.1007/s00170-023-11571-2

By:

Rahmatabadi, Davood;
Soltanmohammadi, Kianoosh;
Pahlavani, Mostafa;
Aberoumand, Mohammad;
Soleyman, Elyas;
Ghasemi, Ismaeil;
Baniassadi, Majid;
Abrinia, Karen;
Bodaghi, Mahdi;
Baghani, Mostafa

Publication type:

Article

Using cutting temperature and chip characteristics with neural network BP and LSTM method to predicting tool life.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 881, doi. 10.1007/s00170-023-11570-3

By:

Chen, Shao-Hsien;
Lin, Yu-Yu

Publication type:

Article

Laser beam remelting of stainless steel plate for cladding and comparison with conventional CMT process.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 911, doi. 10.1007/s00170-023-11567-y

By:

Bunaziv, Ivan;
Ren, Xiaobo;
Hagen, Anette Brocks;
Hovig, Even Wilberg;
Jevremovic, Ivana;
Gulbrandsen-Dahl, Sverre

Publication type:

Article

A mechanical model of cutting force in end surface grinding of zirconia ceramics using rotary ultrasonic machining with longitudinal-torsional coupled vibration.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 651, doi. 10.1007/s00170-023-11565-0

By:

Bie, Wenbo;
Chen, Fan;
Zhao, Bo;
Xie, Shuangxi

Publication type:

Article

Speed and torque control of pneumatic motors using controlled pulsating flow.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 635, doi. 10.1007/s00170-023-11562-3

By:

Aziz, Mohamed A.;
Benini, Ernesto;
Elsayed, Mostafa E. A.;
Khalifa, Mohamed A.;
Gaheen, Osama A.

Publication type:

Article

Wire arc additive manufacturing of thin and thick walls made of duplex stainless steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 381, doi. 10.1007/s00170-023-11560-5

By:

Queguineur, Antoine;
Asadi, Reza;
Ostolaza, Marta;
Valente, Emilie Hørdum;
Nadimpalli, Venkata Karthik;
Mohanty, Gaurav;
Hascoët, Jean-Yves;
Ituarte, Iñigo Flores

Publication type:

Article

A sensorless method for predicting force-induced deformation and surface waviness in robotic milling.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 831, doi. 10.1007/s00170-023-11559-y

By:

Deng, Kenan;
Gao, Dong;
Zhao, Chang;
Lu, Yong

Publication type:

Article

Theoretical and experimental analysis of the temperature rise of a ball screw.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 703, doi. 10.1007/s00170-023-11550-7

By:

Qiu, Ya-Lan;
Zhou, Chang-Guang;
Ou, Yi;
Feng, Fu-Tian

Publication type:

Article

Wall-slip characteristics of viscoelastic abrasive medium in abrasive flow machining process.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 253, doi. 10.1007/s00170-023-11552-5

By:

Fan, Wulin;
Sun, Yuli;
Su, Qinghuai;
Zhao, Jianshe;
Yang, Fanxuan

Publication type:

Article

Groove bottom material removal mechanism and machinability evaluation for longitudinal ultrasonic vibration–assisted milling of Al-50wt% Si alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 365, doi. 10.1007/s00170-023-11548-1

By:

Jing, Lu;
Niu, Qiulin;
Yue, Wenhui;
Rong, Jie;
Gao, Hang;
Tang, Siwen

Publication type:

Article

Research advances in fatigue behaviour of clinched joints.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 1, doi. 10.1007/s00170-023-11547-2

By:

Liu, Fulong;
Chen, Wei;
Deng, Chengjiang;
Guo, Jinlong;
Zhang, Xiaotao;
Men, Yutao;
Dong, Limin

Publication type:

Article

Highly-efficient electrochemical rounding process of sharp corner improved by a tube electrode insulation method.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 295, doi. 10.1007/s00170-023-11545-4

By:

Sun, Yan;
Zhang, Yaxiong;
Ma, Ning;
Chen, Yang;
You, Yiqiang;
Li, Wei;
Liu, Luteng

Publication type:

Article

Improving liquation cracks and mechanical properties of 6005A aluminum alloy MIG welded joints via a hybrid milling-friction stir processing tool.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 419, doi. 10.1007/s00170-023-11539-2

By:

Wu, Laijun;
Yang, Biao;
Han, Xiaohui;
Dong, Yang;
Tan, Caiwang;
Chen, Bo;
Zhou, Li;
Song, Xiaoguo;
Feng, Jicai

Publication type:

Article

Experimental study on thermal deformation suppression and cooling structure optimization of double pendulum angle milling head.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 279, doi. 10.1007/s00170-023-11549-0

By:

Li, Zhaolong;
Wang, Qinghai;
Zhu, Bo;
Wang, Baodong;
Zhu, Wenming;
Du, Junming;
Sun, Benchao

Publication type:

Article

Path planning and pose correction of robot laser cleaning process for specific surfaces of parts.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 349, doi. 10.1007/s00170-023-11535-6

By:

Pan, Zhigui;
Liu, Defu;
Li, Shudan;
Deng, Zixin;
Liu, Jian;
Chen, Tao

Publication type:

Article

Investigations into effect of tool rake angle on nanocutting process for Zr-based amorphous alloy by molecular dynamics simulation.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 211, doi. 10.1007/s00170-023-11533-8

By:

Cui, Xiaoqing;
Liu, Yin;
Sun, Xingwei;
Gong, Yadong;
Dong, Zhixu;
Yang, Heran;
Yuan, Zewei;
Liu, Weijun

Publication type:

Article

Effect of dispersion performance of polishing slurry on the polishing quality of glass-ceramics in bonnet polishing.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 107, doi. 10.1007/s00170-023-11532-9

By:

Wu, Ziwei;
Shen, Jianyun;
Wu, Xian;
Peng, Yunfeng;
Lin, Shaolong;
Huang, Linbin;
Huang, Xuepeng;
Zhu, Laifa

Publication type:

Article

Optimization of the femtosecond laser trepan drilling strategy on IN792 for improving hole geometrical characteristics and machining efficiency.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 93, doi. 10.1007/s00170-023-11531-w

By:

Zhang, Fengyun;
Sun, Shufeng;
Wang, Xi;
Wang, Jin;
Pang, Yong;
Shao, Jing;
Zhan, Jian

Publication type:

Article

Effect of drilling parameters on the hole surface integrity of low alloy steel for nuclear power during BTA deep hole drilling.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 565, doi. 10.1007/s00170-023-11530-x

By:

Li, Binghao;
Huang, Chuanzhen;
Tang, Zhengyi;
Chen, Zhen;
Liu, Hanlian;
Chen, Zengtao;
Niu, Jiahui;
Wang, Zhen

Publication type:

Article

A hybrid approach of case- and rule-based reasoning to assembly sequence planning.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 221, doi. 10.1007/s00170-023-11525-8

By:

Shi, Xiaolin;
Tian, Xitian;
Gu, Jianguo;
Wang, Gangfeng;
Zhao, Dongping;
Ma, Liping

Publication type:

Article

A new Lean tool for efficiency evaluation in SMED projects.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 431, doi. 10.1007/s00170-023-11508-9

By:

Braglia, Marcello;
Di Paco, Francesco;
Marrazzini, Leonardo

Publication type:

Article

Boundary construction method of collision avoidance for conventional cutters.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 65, doi. 10.1007/s00170-023-11419-9

By:

Guo, Xiangyu;
Wang, Rui;
Zhong, Shisheng;
Ge, Yuhao;
Yue, Lingyu

Publication type:

Article

Investigation on tool wear mechanisms and machining tribology of hardened DC53 steel through modified CBN tooling geometry in hard turning.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 547, doi. 10.1007/s00170-023-11528-5

By:

Hassan, Sana;
Khan, Sarmad Ali;
Naveed, Rakhshanda;
Saleem, Muhammad Qaiser;
Mufti, Nadeem Ahmad;
Farooq, Muhammad Umar

Publication type:

Article

A novel approach for surface defect detection of lithium battery based on improved K-nearest neighbor and Euclidean clustering segmentation.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 971, doi. 10.1007/s00170-023-11507-w

By:

Liu, Xinhua;
Wu, Lequn;
Guo, Xiaoqiang;
Andriukaitis, Darius;
Królczyk, Grzegorz;
Li, Zhixiong

Publication type:

Article

Directed energy deposition-arc of thin-walled aerobat shell with structures of internal ribs and overhanging gaps.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 305, doi. 10.1007/s00170-023-11450-w

By:

Yu, Runzhen;
Yu, Shengfu;
Yu, Zhenyu;
Zheng, Bo

Publication type:

Article

Integrated hydrobulging of prolate ellipsoids from preforms with multiple thicknesses.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 401, doi. 10.1007/s00170-023-11412-2

By:

Zhang, Jian;
Tang, Yinhui;
Zhan, Ming;
Wang, Fang;
Zhao, Xilu

Publication type:

Article

Mechanical characterization of thermoplastic elastomers based on olefin processed through material extrusion.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 323, doi. 10.1007/s00170-023-11523-w

By:

Adrover-Monserrat, Bàrbara;
Llumà, Jordi;
Jerez-Mesa, Ramón;
Travieso-Rodriguez, J. Antonio

Publication type:

Article

A benchmark of mechanical properties and operational parameters of different steel filler metals for wire arc additive manufacturing.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 599, doi. 10.1007/s00170-023-11520-z

By:

Nunes, Rafael;
Vandermeiren, Nelis;
Verlinde, Wim;
Boruah, Dibakor;
Motte, Robin;
De Waele, Wim

Publication type:

Article

Study of distortion on milled thin-wall aluminum parts influenced by initial residual stress and toolpath strategy.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 237, doi. 10.1007/s00170-023-11519-6

By:

Zheng, Jun-Yuan;
Voyle, Robert;
Tang, Hon Ping;
Mannion, Anthony

Publication type:

Article

The recognition method for the fractal and the dynamic on the tool flank of a high-energy-efficiency milling cutter.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 951, doi. 10.1007/s00170-023-11516-9

By:

Jiang, Bin;
Ji, Simin;
Zhao, Peiyi;
Fan, Lili

Publication type:

Article

Parameter optimization for PETG/ABS bilayer tensile specimens in material extrusion 3D printing through orthogonal method.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 447, doi. 10.1007/s00170-023-11515-w

By:

Chen, Zhixin;
Gong, Ke;
Huang, Cheng;
Hu, Sihan;
Xu, Han;
Fuenmayor, Evert;
Cao, Zhi;
Major, Ian

Publication type:

Article

A novel approach of shot peening process parameters prediction with missing surface integrity data based on imputation method.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 81, doi. 10.1007/s00170-023-11514-x

By:

Li, Yang;
Wei, Peitang;
Zhao, Xinhao;
Zhu, Rupeng;
Wu, Jizhan;
Liu, Huaiju

Publication type:

Article

Effect of processing parameters on the properties of two-component injection molded recycled polypropylene/ethylene propylene diene monomer automotive parts.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 845, doi. 10.1007/s00170-023-11512-z

By:

Al Menen, Busra;
Ekinci, Aysun;
Oksuz, Mustafa;
Ates, Murat;
Aydin, Ismail

Publication type:

Article

Research on the joining of three-layer sheets by flat bottom riveting process.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 459, doi. 10.1007/s00170-023-11410-4

By:

Chen, Chao;
Ouyang, Xiao

Publication type:

Article