Works matching IS 02683768 AND DT 2023 AND VI 126 AND IP 1/2

Results: 62

Correction to: Design and fabrication by selective laser melting of a LIDAR reflective unit using metal matrix composite material.

Published in:

2023

By:

Boschetto, Alberto;
Bottini, Luana;
Macera, Luciano

Publication type:

Correction Notice

Correction to: Forward kinematics solution for a general Stewart platform through iteration based simulation.

Published in:

2023

By:

Karmakar, Sourabh;
Turner, Cameron J.

Publication type:

Correction Notice

Numerical and experimental study to predict the forming process conditions of non-axisymmetric glass perfume bottles.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 735, doi. 10.1007/s00170-023-11191-w

By:

Biosca, Adrià;
Borrós, Salvador;
Clemente, Vicenç Pedret;
Hyre, Matthew R.;
Granada, Andrés‐Amador García

Publication type:

Article

Modeling and optimization of industrial-scale horizontal direct chill casting.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 615, doi. 10.1007/s00170-023-11187-6

By:

Ansari Dezfoli, Amir Reza

Publication type:

Article

A novel approach for automatic venting system generation on complex surfaces in injection mold design.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 787, doi. 10.1007/s00170-023-11184-9

By:

Yang, Jiong;
Xue, Shuncong;
Hou, Binkui

Publication type:

Article

In situ precipitation 3D printing of highly ordered silver cluster–silver chloride photocatalysts.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 797, doi. 10.1007/s00170-023-11177-8

By:

Chen, Guan-Chen;
Huang, Wei-Tse;
Lee, Po-Ching;
Lin, C. B.

Publication type:

Article

Evaluation of the role of hatch-spacing variation in a lack-of-fusion defect prediction criterion for laser-based powder bed fusion processes.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 659, doi. 10.1007/s00170-023-11163-0

By:

Harkin, Ryan;
Wu, Hao;
Nikam, Sagar;
Yin, Shuo;
Lupoi, Rocco;
Walls, Patrick;
McKay, Wilson;
McFadden, Shaun

Publication type:

Article

Process and materials design via statistical modeling for Inconel-625/tungsten carbide wear-resistant composite coatings fabricated by laser direct metal deposition technique.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 635, doi. 10.1007/s00170-023-11156-z

By:

Olakanmi, Eyitayo Olatunde;
Hoosain, Shaik;
Lawal, Sunday Albert;
Pityana, Sisa Lesley

Publication type:

Article

A 3D finite element analysis of thermally induced residual stress distribution in stainless steel coatings on a mild steel by laser hot wire cladding.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 759, doi. 10.1007/s00170-023-11155-0

By:

Yao, Mingpu;
Kong, Fanrong;
Tong, Wei

Publication type:

Article

Development of the production technology of a new highly effective thermal grease.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 709, doi. 10.1007/s00170-023-11149-y

By:

Roman, Shishkin

Publication type:

Article

Surface properties of molds for powder injection molding and their effect on feedstock moldability and mold adhesion.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 381, doi. 10.1007/s00170-023-11148-z

By:

Kurusu, Rafael S.;
Gholami, Mohsen;
Demarquette, Nicole R.;
Demers, Vincent

Publication type:

Article

Resolving measurement ambiguity in diffractive image microscopy for 6DOF surface measurement using designed aberration and multiple-layer perceptron.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 583, doi. 10.1007/s00170-023-11147-0

By:

Wu, Guo-Wei;
Chen, Liang-Chia

Publication type:

Article

High-cycle tension-tension fatigue performance of additively manufactured 17–4 PH stainless steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 777, doi. 10.1007/s00170-023-11146-1

By:

Lawrence, Bradley D.;
Henry, Todd C.;
Phillips, Francis;
Riddick, Jaret;
Kudzal, Andelle

Publication type:

Article

Influence of the cutting tool geometry on milling aluminum honeycomb structures.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 313, doi. 10.1007/s00170-023-11144-3

By:

Zarrouk, Tarik;
Salhi, Jamal-Eddine;
Nouari, Mohammed;
Salhi, Merzouki;
Kodad, Jalal

Publication type:

Article

Influence of aging treatments on 17–4 PH stainless steel parts realized using material extrusion additive manufacturing technologies.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 163, doi. 10.1007/s00170-023-11136-3

By:

Pellegrini, Alessandro;
Lavecchia, Fulvio;
Guerra, Maria Grazia;
Galantucci, Luigi Maria

Publication type:

Article

Adaptive milling for contours on deformed surface based on on-machine measurement and optimized parallel projection.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 443, doi. 10.1007/s00170-023-11141-6

By:

Yi, Bowen;
Li, Rui;
Li, Weidong;
Wang, Xiaosun;
Wu, Shijing;
Huang, Nuodi

Publication type:

Article

Easy dismantling and separation of friction stir-welded steel and aluminum by foaming.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 561, doi. 10.1007/s00170-023-11139-0

By:

Hangai, Yoshihiko;
Masuda, Atsuya;
Suzuki, Ryosuke;
Aoki, Yasuhiro;
Matsubara, Masaaki;
Fujii, Hidetoshi

Publication type:

Article

Double-sided self-pierce riveting: analysis of the mechanisms behind the chamfered angle position.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 325, doi. 10.1007/s00170-023-11127-4

By:

Wang, Pengyi;
Jin, Jiageng;
Wang, Yucong;
Zhang, Changsong;
Wan, Gehui;
Xiang, Nan;
Zhao, Xueni

Publication type:

Article

Determination of process window for laser peening of thin metal sheets by localized indentation analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 623, doi. 10.1007/s00170-023-11138-1

By:

Yang, Ruoyu;
Hu, Yongxiang

Publication type:

Article

Investigation on formability and mechanism in laser shock hydraulic warm free-bulging of AZ31B magnesium alloy foils.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 505, doi. 10.1007/s00170-023-11143-4

By:

Yan, Zhang;
Ma, Youjuan;
Liu, Huixia;
Wang, Xiao

Publication type:

Article

Effect of tool pin length on interfacial behaviors and mechanical properties of friction stir-welded lap joints of 430/304 stainless steels.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 593, doi. 10.1007/s00170-023-11135-4

By:

Guo, Guolin;
Shen, Yifu;
Ou, Wenmin;
Yu, Xueyong;
Cui, Chenshuo;
Xu, Zhengya;
Zhou, Sheng;
Chen, Hongming

Publication type:

Article

Effect of freezing range on reducing casting defects through 3D sand-printed mold designs.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 569, doi. 10.1007/s00170-023-11112-x

By:

Martinez, Daniel;
King, Philip;
Sama, Santosh Reddy;
Sim, Jay;
Toykoc, Hakan;
Manogharan, Guha

Publication type:

Article

Forward kinematics solution for a general Stewart platform through iteration based simulation.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 813, doi. 10.1007/s00170-023-11130-9

By:

Karmakar, Sourabh;
Turner, Cameron J.

Publication type:

Article

Machine vision-based gradient-boosted tree and support vector regression for tool life prediction in turning.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 471, doi. 10.1007/s00170-023-11137-2

By:

Bagga, Prashant J.;
Patel, Kaushik M.;
Makhesana, Mayur A.;
Şirin, Şenol;
Khanna, Navneet;
Krolczyk, Grzegorz M.;
Pala, Adarsh D.;
Chauhan, Kavan C.

Publication type:

Article

Force and vision-based system for robotic sealing monitoring.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 391, doi. 10.1007/s00170-023-11110-z

By:

Pereira, Franco Rocha;
Rodrigues, Caio Dimitrov;
Souza, Hugo da Silva e;
Neto, José Oliveira Cruz;
Rocha, Matheus Chiaramonte;
Barbosa, Gustavo Franco;
Shiki, Sidney Bruce;
Inoue, Roberto Santos

Publication type:

Article

Machining accuracy and force characteristic of diamond wire sawing and diamond wire electrical discharge sawing during rip sawing and cross sawing.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 697, doi. 10.1007/s00170-023-11132-7

By:

Qiu, Jian;
Lv, Jianzhuang

Publication type:

Article

Face gear generating grinding residual model based on the normal cutting depth iterative method.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 355, doi. 10.1007/s00170-023-11121-w

By:

Cai, Sijie;
Cai, Zhiqin;
Yao, Bin;
Shen, Zhihuang;
Liu, Jianchun;
Huang, Haipeng;
Lin, Bingjing;
Lin, Jianchun;
Huang, Haibin

Publication type:

Article

Design and fabrication by selective laser melting of a LIDAR reflective unit using metal matrix composite material.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 857, doi. 10.1007/s00170-023-11131-8

By:

Boschetto, Alberto;
Bottini, Luana;
Macera, Luciano

Publication type:

Article

Sensor fusion and the application of artificial intelligence to identify tool wear in turning operations.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 429, doi. 10.1007/s00170-023-11113-w

By:

Al-Azmi, A.;
Al-Habaibeh, Amin;
Abbas, Jabbar

Publication type:

Article

Properties evaluation of chemically treated TPU parts printed through FFF.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 131, doi. 10.1007/s00170-023-11111-y

By:

Dixit, Nidhi;
Jain, Prashant K.

Publication type:

Article

Study on tool wear mechanism under cryogenic CO<sub>2</sub>-assisted minimum quantity lubrication technology.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 543, doi. 10.1007/s00170-023-11122-9

By:

Cheng, Lin;
Qiu, Tian;
Huang, Shizhan;
Xie, Hong;
Liu, Chao;
Li, Yousheng;
Lin, Liangliang;
Xiang, Zhiyang;
Shui, Yan;
Wang, Fuzeng;
Wu, Xian;
Yan, Lan;
Jiang, Feng

Publication type:

Article

Experimental approach for development of a powder spreading metric in additive manufacturing.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 371, doi. 10.1007/s00170-023-11120-x

By:

Sehhat, M. Hossein;
Sutton, Austin T.;
Yates, Zane;
Leu, Ming C.

Publication type:

Article

Study on Support-Free Printing of Large-Flow Material Extrusion Process.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 603, doi. 10.1007/s00170-023-11119-4

By:

Wu, Huaying;
Wang, Xiao;
Li, Yuqiang

Publication type:

Article

Numerical investigation of tool parameter influence on the interlock forming during flat clinching process.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 301, doi. 10.1007/s00170-023-11118-5

By:

Wang, Zhiyong;
Han, Shanling;
Li, Zhiyong;
Li, Yong

Publication type:

Article

Cutting performance of a tool with continuous lubrication of atomized cutting fluid at the tool-chip interface.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 117, doi. 10.1007/s00170-023-11116-7

By:

Zhang, Wei;
Cao, Tongkun

Publication type:

Article

ANOVA analysis for estimating the accuracy and surface roughness of precisely drilled holes of steel 42CrMo4 QT.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 675, doi. 10.1007/s00170-023-11115-8

By:

Řehoř, Jan;
Fulemová, Jaroslava;
Kutlwašer, Jan;
Gombár, Miroslav;
Harničárová, Marta;
Kušnerová, Milena;
Vagaská, Alena;
Povolný, Michal;
Valíček, Jan;
Zatloukal, Tomáš

Publication type:

Article

Damping property of a NiTi auxetic structure fabricated through selective laser melting.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 519, doi. 10.1007/s00170-023-11106-9

By:

Nespoli, Adelaide;
Grande, Antonio Mattia;
Passaretti, Francesca;
Rigamonti, Daniela;
Sala, Giuseppe;
Bettini, Paolo

Publication type:

Article

A 3D-printable modular robotic gripper.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 845, doi. 10.1007/s00170-023-11114-9

By:

Matos, Pedro;
Neto, Pedro

Publication type:

Article

Combined effect of the interlayer temperature with travel speed on features of thin wall WAAM under two cooling approaches.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 273, doi. 10.1007/s00170-023-11105-w

By:

Teixeira, Felipe Ribeiro;
Scotti, Fernando Matos;
Jorge, Vinicius Lemes;
Scotti, Américo

Publication type:

Article

Sustainable 4D printing of magneto-electroactive shape memory polymer composites.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 35, doi. 10.1007/s00170-023-11101-0

By:

Lalegani Dezaki, Mohammadreza;
Bodaghi, Mahdi

Publication type:

Article

In-cavity pressure measurements for failure diagnosis in the injection moulding process and correlation with numerical simulation.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 291, doi. 10.1007/s00170-023-11100-1

By:

Araújo, Cátia;
Pereira, Diogo;
Dias, Diana;
Marques, Rita;
Cruz, Sílvia

Publication type:

Article

Analysis of variable frictional contacts wave springs fabricated using MultiJet fusion additive manufacturing.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 87, doi. 10.1007/s00170-023-11099-5

By:

Shah, Gul Jamil;
Haq, Muhammad Rizwan ul;
Lin, Shang-Chih;
Jeng, Jeng-Ywan

Publication type:

Article

Mechanism on the increased sheet metal formability in flexible-die forming process using elastic composites with magnetic-field-dependence as the pressure-carrying medium.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 17, doi. 10.1007/s00170-023-11097-7

By:

Xiang, Nan;
Yang, Meng-han;
Wang, Peng-yi;
Wang, Hao-ran;
Huang, Tao;
Guo, Jun-qing;
Chen, Fu-xiao

Publication type:

Article

MOSPPA: monitoring system for palletised packaging recognition and tracking.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 179, doi. 10.1007/s00170-023-11098-6

By:

Castaño-Amoros, Julio;
Fuentes, Francisco;
Gil, Pablo

Publication type:

Article

Assessment of the compressive mechanical behavior of injection molded E-glass/polypropylene by mechanical testing and X-ray computed tomography.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 209, doi. 10.1007/s00170-023-11094-w

By:

Stamopoulos, Antonios G.;
Gazza, Francesco;
Neirotti, Giuseppe

Publication type:

Article

Influence of binder concentration in zeolitic ZSM-5/bentonite 3D-printed monoliths manufactured through robocasting for catalytic applications.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 259, doi. 10.1007/s00170-023-11091-z

By:

Koltsakidis, Savvas;
Koidi, Vasiliki;
Lappas, Angelos;
Heracleous, Eleni;
Tzetzis, Dimitrios

Publication type:

Article

Numerical and experimental investigation of the ultrasonic vibration effects on the tube hydroforming process in a die with a square cross-section.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 197, doi. 10.1007/s00170-023-11081-1

By:

Eftekhari Shahri, Seyyed Ehsan;
Lakhi, Mohammad;
Taheridoustabad, Iman

Publication type:

Article

Multi-response optimization of TIG dissimilar welding of AISI 1008 mild steel and AISI 316 stainless steel using grey-based Taguchi method.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 749, doi. 10.1007/s00170-023-11080-2

By:

Ogbonna, Okwudili Simeon;
Akinlabi Akinlabi, Stephen;
Madushele, Nkosinathi;
Fatoba, Olawale Samuel;
Akinlabi, Esther Titilayo

Publication type:

Article

Effects of nonlinear behaviour of linear ball guideway on chatter frequency of lathe machine tool.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 225, doi. 10.1007/s00170-023-11079-9

By:

Hadraba, Petr;
Wang, Jiunn-Jyh;
Hadas, Zdenek

Publication type:

Article

Tribological assessment of the SiO<sub>2</sub> coating deposited by sol–gel process toward cutting tool coating.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 487, doi. 10.1007/s00170-023-11072-2

By:

Pereira, Natália Fernanda Santos;
Reis, Bárbara Cristina Mendanha;
Dos Santos, Anderson Júnior;
Houmard, Manuel;
Câmara, Marcelo Araújo;
Rodrigues, Alessandro Roger;
Rubio, Juan Carlos Campos

Publication type:

Article