Works matching DE "TANGENTIAL force"

Results: 636

DEM simulation of effects of particle size distribution on meso-mechanical properties of slip zone soil.

Published in:

Mechanics of Advanced Materials & Structures, 2025, v. 32, n. 7, p. 1467, doi. 10.1080/15376494.2024.2364070

By:

Yubao, Song;
Zhibin, Liu;
Zechuang, Li;
Shouheng, Jiang

Publication type:

Article

In-Situ Optical Scratch Analysis and Correlation Between Tangential Force and Scratch Behavior of Thermoplastic Injection Molded Plates.

Published in:

Macromolecular Symposia, 2017, v. 373, n. 1, p. n/a, doi. 10.1002/masy.201600125

By:

Szilágyi, Csongor;
Seeger, Philipp;
Moneke, Martin;
Stengler, Ralph

Publication type:

Article

An Investigation into the Surface Skidding Response of PBX 9501 and PBX 9502.

Published in:

Propellants, Explosives, Pyrotechnics, 2022, v. 47, n. 7, p. 1, doi. 10.1002/prep.202200010

By:

Watkins, Scott A.;
Lee, Ryan J.;
Hewitt, Austin T.;
Mankowski, John;
Brinkman, J.;
Dickens, James;
Neuber, Andreas A.

Publication type:

Article

Insights into theoretical and practical characteristics of capacitive flexible tactile sensor based on spherical surface plate.

Published in:

Journal of Materials Science: Materials in Electronics, 2021, v. 32, n. 13, p. 17182, doi. 10.1007/s10854-021-06181-1

By:

Gao, Yong Hui;
Bi, Yu Qing;
Lang, Ji Hui;
Zhang, Qi

Publication type:

Article

Study on ultrasonic vibration-assisted grinding characteristics of high volume fraction SiCp/Al composites.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 138, n. 2, p. 385, doi. 10.1007/s00170-025-15546-3

By:

Yao, Xuebin;
Yu, Wei;
Peng, Jianhao;
Ding, Wenfeng;
Zhao, Biao

Publication type:

Article

Modeling and experimental investigation on sawing force in ultrasonic vibration–assisted diamond wire sawing mono-Si considering material removal mode.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 138, n. 2, p. 471, doi. 10.1007/s00170-025-15542-7

By:

Li, Honghao;
Gao, Yufei;
Cheng, Dameng;
Yang, Chunfeng

Publication type:

Article

Novel processing of micro-channels in micro-grinding with automated laser-assistance.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 138, n. 1, p. 17, doi. 10.1007/s00170-024-14510-x

By:

Sahu, Ashish Kumar;
Iqbal, Faiz;
Jha, Sunil

Publication type:

Article

Modeling of ultrasonic grinding force considering empty cutting and material softening effect.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 3, p. 1203, doi. 10.1007/s00170-025-15259-7

By:

Chen, Haifeng;
Li, Jiabin;
Liao, Dongri;
Deng, Mingming;
Zhou, Changjiang

Publication type:

Article

Wear behavior and material removal mechanism during ultrasonic vibration-assisted grinding γ-TiAl materials using a single CBN grain.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 3, p. 1581, doi. 10.1007/s00170-025-15253-z

By:

Wang, Xiaowei;
Song, Jiahao;
Xiao, Hong;
Liang, Zhongwei;
Qin, Xiaojie;
Chen, Tao;
Ding, Wenfeng;
Zhao, Biao

Publication type:

Article

Grinding force modeling in ultrasonic-assisted face grinding of ZrO2 ceramics and influence of grinding wheel wear on its accuracy.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 7/8, p. 3847, doi. 10.1007/s00170-024-14718-x

By:

Zhou, Zongchen;
Ding, Kai;
Su, Honghua;
Zhuang, Bailiang;
Li, Qilin;
Lei, Weining;
Cao, Zhongliang;
Han, Xiao

Publication type:

Article

Theoretical investigation of anisotropic material removal mechanism in robotic belt grinding single crystal superalloy process.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 7/8, p. 3487, doi. 10.1007/s00170-024-14573-w

By:

Liu, Mingjun;
Gong, Yadong;
Zhang, Weijian;
Zu, Xinpeng;
Jin, Liya;
Sun, Yao;
Li, Hongliang;
Zhao, Jibin

Publication type:

Article

Development and characterization of a rotary ultrasonic grinding tool with large cup wheel for SiCp/Al composites.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 11/12, p. 5949, doi. 10.1007/s00170-024-14072-y

By:

Qin, Huibin;
Qiu, Junyu;
Feng, Yi;
Bai, Xuri

Publication type:

Article

AAC theory for ultrasonic vibration-assisted grinding.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1609, doi. 10.1007/s00170-024-13795-2

By:

Hu, Zhongwei;
Chen, Yue;
Lai, Zhiyuan;
Zhang, Yuqiang;
Yu, Yiqing;
Jin, Jianfeng;
Peng, Qing;
Xu, Xipeng

Publication type:

Article

Prediction and analysis of grinding force on grinding heads based on grain measurement statistics and single-grain grinding simulation.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 1/2, p. 513, doi. 10.1007/s00170-024-13370-9

By:

Li, Baichun;
Li, Xiaokun;
Hou, Shenghui;
Yang, Shangru;
Li, Zhi;
Qian, Junze;
He, Zhenpeng

Publication type:

Article

Experimental study of the removal characteristics of C/SiC with different fiber structure arrangements for two-dimensional ultrasound-assisted grinding.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 3467, doi. 10.1007/s00170-024-13138-1

By:

Wang, Yashuai;
Li, Jiangtao

Publication type:

Article

Modeling of grinding force in longitudinal ultrasonic vibration–assisted grinding alumina ceramics and experimental evaluation.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 5/6, p. 2325, doi. 10.1007/s00170-023-11590-z

By:

Zhao, Mingli;
Xue, Boxi;
Li, Bohan;
Zhu, Junming;
WenbinSong;
Nie, Lixin

Publication type:

Article

Study on high-shear and low-pressure grinding using a new BAAT with soft-hard combined substrate for single-crystal silicon.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 1, p. 467, doi. 10.1007/s00170-024-13141-6

By:

Tian, Yebing;
Zhang, Guoyu;
Liu, Bing;
Ahmad, Shadab;
Liu, Shuang;
Zhao, Shuangchen

Publication type:

Article

Effect of milling type and cooling mode on cutting characteristics during CFRP milling using a PCD burr end mill.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 5/6, p. 2735, doi. 10.1007/s00170-023-12488-6

By:

Zhang, Lifeng;
Zhang, Xiaoguang

Publication type:

Article

Longitudinal-torsional coupled rotary ultrasonic machining end surface grinding of SiCf/SiC composites: a mechanical model of cutting force.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 3/4, p. 1227, doi. 10.1007/s00170-023-12360-7

By:

Bie, Wenbo;
Chen, Fan;
Wang, Xiaobo;
Chen, Shaopeng;
Fu, Zongxia;
Zhao, Bo

Publication type:

Article

Multi-objective analysis and optimization of energy aspects during dry and MQL turning of unreinforced polypropylene (PP): an approach based on ANOVA, ANN, MOWCA, and MOALO.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 11/12, p. 4933, doi. 10.1007/s00170-023-12205-3

By:

Hamdi, Amine;
Yapan, Yusuf Furkan;
Uysal, Alper;
Abderazek, Hammoudi

Publication type:

Article

Theoretical and experimental study of cutting forces under tool flank interference in ultra-precision diamond milling.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 3/4, p. 1661, doi. 10.1007/s00170-023-11986-x

By:

Liu, Tongke;
Peng, Wei;
Xiong, Zhiwen;
Zhang, Shaojian

Publication type:

Article

Preparation and performance of grinding wheel with orderly arranged abrasive particles based on laser processing technology.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 9/10, p. 4519, doi. 10.1007/s00170-023-11540-9

By:

Li, Kangwei;
Zhang, Mingjun;
Zhang, Jian;
Mao, Cong;
Dai, Longzhou;
Zhang, Yun;
Zhang, Yan;
Bi, Zhuming;
Tang, Kun;
Hu, Yongle

Publication type:

Article

Grinding force assessment in tangential ultrasonic vibration-assisted grinding gear: Analytical model and experimental verification.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 11/12, p. 5457, doi. 10.1007/s00170-023-11444-8

By:

Bie, Wenbo;
Zhao, Bo;
Gao, Guofu;
Chen, Fan;
Chen, Huitao

Publication type:

Article

A novel wheel-type vibration-magnetorheological compound finishing method.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 9/10, p. 4213, doi. 10.1007/s00170-023-11034-8

By:

Gu, Yan;
Fu, Bin;
Lin, Jieqiong;
Chen, Xiuyuan;
Zhou, Weidong;
Yu, Bingjin;
Zhao, Huibo;
Li, Zhen;
Xu, Zisu

Publication type:

Article

Geometric-kinematic model for reinforced concrete core drilling.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 7/8, p. 3149, doi. 10.1007/s00170-022-10787-y

By:

Marra, Lucas;
Fabbro, Stefan;
Kuffa, Michal;
Wegener, Konrad

Publication type:

Article

Investigation of material removal mechanisms of laser-structured Si3N4 via single diamond grit scratching.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 5/6, p. 2759, doi. 10.1007/s00170-022-10793-0

By:

Paknejad, Masih;
Azarhoushang, Bahman;
Zahedi, Ali;
Khakrangin, Mehdi;
Kadivar, Mohammad Ali

Publication type:

Article

Analytical modeling of abrasive grain-workpiece cutting coefficient and experimental investigation on tangential ultrasonic vibration-assisted forming grinding gear.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 299, doi. 10.1007/s00170-022-10660-y

By:

Bie, Wenbo;
Zhao, Bo;
Gao, Guofu;
Chen, Fan;
Chen, Shaopeng

Publication type:

Article

Study on grinding force of high volume fraction SiCp/Al2024 composites.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 11/12, p. 3813, doi. 10.1007/s00170-021-07881-y

By:

Guo, Guangyan;
Gao, Qi;
Wang, Quanzhao;
Pan, Shichao

Publication type:

Article

Theoretical modeling and experimental study on grinding force of straight groove structured grinding wheel.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 10, p. 3407, doi. 10.1007/s00170-022-10747-6

By:

Yi, Jun;
Yi, Tao;
Deng, Hui;
Chen, Bing;
Zhou, Wei

Publication type:

Article

Characteristics of high-shear and low-pressure grinding for Inconel718 alloy with a novel super elastic composite abrasive tool.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 123, n. 1/2, p. 345, doi. 10.1007/s00170-022-10179-2

By:

Gu, Zhiqiang;
Tian, Yebing;
Han, Jinguo;
Wei, Chengwei;
Babbar, Atul;
Liu, Bing

Publication type:

Article

A 2.5D C/C composite cutting force prediction model based on brittle fracture mechanism.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 123, n. 1/2, p. 199, doi. 10.1007/s00170-022-10088-4

By:

Zhang, Qianrui;
Tao, Yue;
Luo, Ming;
Ge, Jia;
Shan, Chenwei

Publication type:

Article

Predictive model for cutting forces and specific cutting energy in ultrasonic-assisted grinding process: a mechanistic approach.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 122, n. 7/8, p. 2953, doi. 10.1007/s00170-022-10068-8

By:

Singh, Aswani Kumar;
Sharma, Varun;
Pandey, Pulak M.

Publication type:

Article

Characteristics of grinding force and Kevlar deformation of novel body-armor-like abrasive tool.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 122, n. 3/4, p. 2019, doi. 10.1007/s00170-022-10033-5

By:

Tian, Yebing;
Tian, Chengjin;
Han, Jinguo;
Babbar, Atul;
Liu, Bing

Publication type:

Article

Thermo-mechanical coupling during belt grinding and corresponding surface integrity of titanium alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 121, n. 9/10, p. 6599, doi. 10.1007/s00170-022-09783-z

By:

Liu, Ying;
Xu, Jiayu;
Xiao, Guijian;
Zhou, Kun;
Liu, Gang

Publication type:

Article

Study on the influence of fiber cutting angle on cutting force in ultrasonic assisted cutting CFRP disk.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 121, n. 5/6, p. 3989, doi. 10.1007/s00170-022-09494-5

By:

Wang, Xiaobo;
Song, Chaosheng;
Li, Lulu;
Jiao, Feng

Publication type:

Article

Grinding performance integrated experimental evaluation on alumina ceramics with leaf-vein bionic grinding wheel.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 121, n. 3/4, p. 2525, doi. 10.1007/s00170-022-09502-8

By:

Li, Chao;
Duan, Jia;
Zhang, Xiaohong;
Shi, Zhaoyao;
Yuchi, Guangzhi;
Zhang, Songhui;
Li, Wei;
Wen, Dongdong;
Luo, Shi

Publication type:

Article

Experimental study on ultrasonic vibration-assisted grinding of hardened steel using white corundum wheel.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 121, n. 3/4, p. 2243, doi. 10.1007/s00170-022-09473-w

By:

Huang, Qiang;
Zhao, Biao;
Cao, Yang;
Ding, Wenfeng;
Fu, Yucan;
Pu, Changlan;
Tang, Menglan;
Deng, Mingming;
Liu, Guoliang

Publication type:

Article

Evaluation of: MOSSA, MOALO, MOVO and MOGWO algorithms in green machining to enhance the turning performances of X210Cr12 steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 3/4, p. 2135, doi. 10.1007/s00170-022-08897-8

By:

Nouioua, Mourad;
Laouissi, Aissa;
Brahami, Riad;
Blaoui, Mohamed Mossaab;
Hammoudi, Abderazek;
Yallese, Mohamed Athmane

Publication type:

Article

Analytical simulation of grinding forces based on the micro-mechanisms of cutting between grain-workpiece.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 7/8, p. 4781, doi. 10.1007/s00170-021-08280-z

By:

Adibi, Hamed;
Jamaati, Farzad;
Rahimi, Abdolreza

Publication type:

Article

Mechanistic modeling of cutting forces in high-speed microturning of titanium alloy with consideration of nose radius.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2393, doi. 10.1007/s00170-021-08437-w

By:

Aslantas, Kubilay;
Ülker, Şükrü;
Şahan, Ömer;
Pimenov, Danil Yu;
Giasin, Khaled

Publication type:

Article

A turning simulation environment for geometric error estimation of thin-walled parts.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 1/2, p. 789, doi. 10.1007/s00170-021-08298-3

By:

Manikandan, Hareendran;
Bera, Tufan Chandra

Publication type:

Article

Influence of texture shape and arrangement on nanofluid minimum quantity lubrication turning.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 1/2, p. 631, doi. 10.1007/s00170-021-08235-4

By:

Wang, Xiaoming;
Li, Changhe;
Zhang, Yanbin;
Said, Zafar;
Debnath, Sujan;
Sharma, Shubham;
Yang, Min;
Gao, Teng

Publication type:

Article

Experimental and analytical study of ultrasonic elliptical vibration cutting of micro-pyramid reflective mold based on guided wave transmission.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 1/2, p. 237, doi. 10.1007/s00170-021-07872-z

By:

Jiang, Tao;
Yang, Jintao;
Pi, Jun;
Luo, Wenyu;
Zhang, Jun

Publication type:

Article

Novel performance assessment of interrupted grinding process using aluminum oxide wheel with resinoid bond.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 9/10, p. 2701, doi. 10.1007/s00170-021-07757-1

By:

Ribeiro, Fernando Sabino Fonteque;
Lopes, José Claudio;
Rodriguez, Rafael Lemes;
de Angelo Sanchez, Luiz Eduardo;
de Mello, Hamilton José;
de Aguiar, Paulo Roberto;
Bianchi, Eduardo Carlos

Publication type:

Article

Multi-response optimization using artificial neural network-based GWO algorithm for high machining performance with minimum quantity lubrication.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3765, doi. 10.1007/s00170-021-07745-5

By:

Nouioua, Mourad;
Laouissi, Aissa;
Yallese, Mohamed Athmane;
Khettabi, Riad;
Belhadi, Salim

Publication type:

Article

Advances in precision manufacturing towards eco-friendly grinding process by applying MQL with cold air compared with cooled wheel cleaning jet.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 11/12, p. 3329, doi. 10.1007/s00170-021-06713-3

By:

de Moraes, Douglas Lyra;
Lopes, José Claudio;
Andrioli, Bruno Vicente;
Moretti, Guilherme Bressan;
da Silva, Andrigo Elisiario;
da Silva, Jean Machado Maciel;
Ribeiro, Fernando Sabino Fonteque;
de Aguiar, Paulo Roberto;
Bianchi, Eduardo Carlos

Publication type:

Article

Influence of cryogenic cooling on milling hole exit of QFRP based on thermal–mechanical coupling.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 110, n. 3/4, p. 1113, doi. 10.1007/s00170-020-05916-4

By:

Wang, Fengbiao;
Wang, Yongqing

Publication type:

Article

Performance evaluation of minimum quantity lubrication technique in grinding of AISI 202 stainless steel using nano-MoS2 with vegetable-based cutting fluid.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 110, n. 1/2, p. 125, doi. 10.1007/s00170-020-05840-7

By:

Pal, Amrit;
Chatha, Sukhpal Singh;
Singh, Kamaldeep

Publication type:

Article

Grinding comparative between ductile iron and austempered ductile iron under CBN wheel combined to abrasive grains with high and low friability.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 109, n. 9-12, p. 2679, doi. 10.1007/s00170-020-05787-9

By:

Daniel, Douglas Maiochi;
Ávila, Benício Nacif;
Garcia, Mateus Vinicius;
Lopes, José Claudio;
Ribeiro, Fernando Sabino Fonteque;
de Mello, Hamilton José;
de Angelo Sanchez, Luiz Eduardo;
Aguiar, Paulo Roberto;
Bianchi, Eduardo Carlos

Publication type:

Article

New knowledge about grinding using MQL simultaneous to cooled air and MQL combined to wheel cleaning jet technique.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 109, n. 3/4, p. 905, doi. 10.1007/s00170-020-05721-z

By:

Ribeiro, Fernando Sabino Fonteque;
Lopes, José Claudio;
Garcia, Mateus Vinicius;
de Moraes, Douglas Lyra;
da Silva, Andrigo Elisiario;
de Angelo Sanchez, Luiz Eduardo;
de Aguiar, Paulo Roberto;
Bianchi, Eduardo Carlos

Publication type:

Article