Works matching IS 02683768 AND DT 2023 AND VI 125 AND IP 1/2

Results: 62

Correction to: Multiform weld joint flaws detection and classification by sagacious artificial neural network technique.

Published in:

2023

By:

Patil, Rajesh V.;
Reddy, Yerreddy Prasannatha

Publication type:

Correction Notice

Comparative study of I-optimal design and definitive screening design for developing prediction models and optimization of average surface roughness of PLA printed parts using fused deposition modeling.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 689, doi. 10.1007/s00170-022-10784-1

By:

Abas, Muhammad;
Habib, Tufail;
Noor, Sahar;
Khan, Khushal Muhammad

Publication type:

Article

Analysis on corner wrinkling for axial hydro-forging of variable-diameter tube.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 903, doi. 10.1007/s00170-022-10783-2

By:

Chu, Guannan;
Wang, Qingfeng;
Zhu, Mingjing;
Sun, Lei;
Ling, Chen;
Liu, Xiehan

Publication type:

Article

Experimental investigation of hybrid cooling approach using a modified tool holder for turning of Inconel 625 superalloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 873, doi. 10.1007/s00170-022-10781-4

By:

Rakesh, P. R.;
Chakradhar, D.

Publication type:

Article

Experimental study of the influence of swing grinding parameters on machining surface quality of large-width cam.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 701, doi. 10.1007/s00170-022-10779-y

By:

Sun, Li;
Dong, Baojiang;
Lu, Jie;
Zhou, Honggen;
Chen, Jianzhi;
Li, Guochao

Publication type:

Article

Effects of process parameters on friability and surface quality in the rapid investment casting process.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 731, doi. 10.1007/s00170-022-10777-0

By:

Fedorov, Konstantin;
Ravindran, Comondore;
Fayazbakhsh, Kazem

Publication type:

Article

A review: research progress of chemical–mechanical polishing slurry for copper interconnection of integrated circuits.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 47, doi. 10.1007/s00170-022-10775-2

By:

Yan, Han;
Niu, Xinhuan;
Qu, Minghui;
Luo, Fu;
Zhan, Ni;
Liu, Jianghao;
Zou, Yida

Publication type:

Article

Research on the mechanism and process of polycrystalline diamond by EDM.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 819, doi. 10.1007/s00170-022-10770-7

By:

Jiang, Meng;
Li, Li;
Sun, Xumin;
Wang, Wencheng;
Liu, Zaichao

Publication type:

Article

Machinability and chip morphology evolution of hardened stainless steel using liquid nitrogen cryogenic.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 967, doi. 10.1007/s00170-022-10765-4

By:

Wang, Wenyuan;
Wang, Biling;
Liu, Boyu;
Gao, Hang;
Wei, Zhaocheng

Publication type:

Article

Research and prospect of on-line monitoring technology for laser additive manufacturing.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 25, doi. 10.1007/s00170-022-10758-3

By:

Li, Wanyang;
Liu, Weiwei;
Saleheen, Kazi Mojtaba;
Liu, Huanqiang;
Xia, Yong;
Al-Hammadi, Gamal;
Xue, Lin;
Wang, Fengtao;
Song, Xueguan;
Zhang, Yingzhong

Publication type:

Article

A high-precision prediction model for surface topography of abrasive belt grinding considering elastic contact.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 777, doi. 10.1007/s00170-022-10757-4

By:

Liu, Ying;
Song, Shayu;
Xiao, Guijian;
Huang, Yun;
Zhou, Kun

Publication type:

Article

Analysis of in-mold shrinkage measurement for amorphous and semicrystalline polymers using a multivariate sensor.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 587, doi. 10.1007/s00170-022-10755-6

By:

Masato, Davide;
Kazmer, David O.;
Panchal, Rahul R.

Publication type:

Article

Synthesis and characterization of spark plasma sintered zirconia and ferrotitanium reinforced hybrid aluminium composite.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 763, doi. 10.1007/s00170-022-10748-5

By:

Akinwamide, Samuel Olukayode;
Maleka, Mabontle;
Motabeni, Nthabiseng;
Akinribide, Ojo Jeremiah;
Oluwasegun, Falodun Eso;
Olubambi, Peter Apata

Publication type:

Article

An intelligent parameters optimization method of titanium alloy belt grinding considering machining efficiency and surface quality.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 513, doi. 10.1007/s00170-022-10723-0

By:

Xiao, Guijian;
Gao, Hui;
Zhang, Youdong;
Zhu, Bao;
Huang, Yun

Publication type:

Article

Multiform weld joint flaws detection and classification by sagacious artificial neural network technique.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 913, doi. 10.1007/s00170-022-10719-w

By:

Patil, Rajesh V.;
Reddy, Yerreddy Prasannatha

Publication type:

Article

Experimental research on new hole-making method assisted with asynchronous mixed frequency vibration in TiBw/TC4 composites.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 543, doi. 10.1007/s00170-022-10754-7

By:

Zhou, Haojie;
Feng, Yong;
Xu, Weiwei;
Zhou, Zhiyuan;
Qin, Yuyan;
Jia, Xiaolin

Publication type:

Article

Study on the surface integrity of 7050 aluminum alloy with different crystal orientations during high-speed machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 661, doi. 10.1007/s00170-022-10717-y

By:

Lu, Wei;
Zong, Chengguo;
Ni, Chenbing;
Yu, Xiao;
Liu, Dejian

Publication type:

Article

High reliability model of mechanical response in drilling of CFRP/Al stacks.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 645, doi. 10.1007/s00170-022-10750-x

By:

Gong, Qinghong;
Li, Liang;
Yuan, Xinman;
Hu, Zhiqin;
Chen, Jie;
Ma, Ke

Publication type:

Article

Research on hydroforming of 5A06 aluminum alloy semi-ellipsoid shell with differential thickness.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 603, doi. 10.1007/s00170-022-10749-4

By:

Mo, Chen;
Xu, Yongchao;
Yuan, Shijian

Publication type:

Article

Tool wear classification in milling for varied cutting conditions: with emphasis on data pre-processing.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 341, doi. 10.1007/s00170-022-10701-6

By:

Li, Kuan-Ming;
Lin, Yi-Yen

Publication type:

Article

Effect of preheating during laser metal deposition on the properties of laminated bending dies.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 157, doi. 10.1007/s00170-022-10697-z

By:

Dardaei Joghan, Hamed;
Hahn, Marlon;
Tekkaya, A. Erman

Publication type:

Article

Suppressing notch wear by changing the tool path in the side milling of a Ti-6Al-4 V alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 453, doi. 10.1007/s00170-022-10741-y

By:

Inácio, Ricardo Henrique;
da Silva, Rodrigo Henriques Lopes;
Pereira, Igor Cézar;
Hassui, Amauri

Publication type:

Article

Effect of welding heat input conditions on the dynamic behavior of pulse laser beam welding molten pool for Ti6Al4V thin plate with clearance.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 629, doi. 10.1007/s00170-022-10740-z

By:

Kong, Bin;
Wei, Yanhong;
Tang, Fengye;
Chang, Yiting;
Chen, Jicheng

Publication type:

Article

Grinding force model for gear profile grinding based on material removal mechanism.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 743, doi. 10.1007/s00170-022-10739-6

By:

Xiao, Yuliang;
Wang, Shilong;
Ma, Chi;
Wang, Sibao

Publication type:

Article

Dissociation artificial neural network for tool wear estimation in CNC milling.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 887, doi. 10.1007/s00170-022-10737-8

By:

Wong, Shi Yuen;
Chuah, Joon Huang;
Yap, Hwa Jen;
Tan, Chee Fai

Publication type:

Article

Cutting performance and antifriction mechanism of Al2O3/TiC/TiB2/h-BN@Al2O3 self-lubricating ceramic tool.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 809, doi. 10.1007/s00170-022-10734-x

By:

Shi, Yuxin;
Chen, Zhaoqiang;
Ji, Lianggang;
Xiao, Guangchun;
Yi, Mingdong;
Zhang, Jingjie;
Chen, Hui;
Xu, Chonghai

Publication type:

Article

Numerical simulation of billet height-diameter ratio on magnesium alloy automobile wheel formed by back extrusion.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 529, doi. 10.1007/s00170-022-10732-z

By:

Jiang, Yanchao;
Ren, Liang;
Le, Qichi;
Liao, Qiyu;
Zhu, Yatong;
Zhou, Weiyang;
Zhao, Tao

Publication type:

Article

Correction to: A dimensionless analysis to select directed energy deposition process parameters for proper clad formation.

Published in:

2023

By:

Lim, Choon Wee Joel;
Zhang, Yanmei;
Huang, Sheng;
Chan, Wai Lee

Publication type:

Correction Notice

Vibratory finishing for the cavity of aero-engine integral casting casing: mechanism analysis and performance evaluation.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 713, doi. 10.1007/s00170-022-10728-9

By:

Hao, Yupeng;
Yang, Shengqiang;
Li, Dongxiang;
Li, Wenhui;
Li, Xiuhong

Publication type:

Article

A novel high-quality and high-efficiency immersion fluid chemical mechanical polishing process for integral impellers.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 613, doi. 10.1007/s00170-022-10726-x

By:

Liao, Longxing;
Shanming, Luo;
Chang, Xuefeng;
Fu, Shengping;
Mo, Jingyu

Publication type:

Article

Application of the gradient boosting decision tree in the online prediction of rolling force in hot rolling.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 387, doi. 10.1007/s00170-022-10716-z

By:

Wang, Qiuna;
Song, Lebao;
Zhao, Jianwei;
Wang, Haiyu;
Dong, Lijie;
Wang, Xiaochen;
Yang, Quan

Publication type:

Article

Vibration suppression in macro–micro grinding system of aeroengine blade based on impedance compensation prediction control strategy.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 793, doi. 10.1007/s00170-022-10721-2

By:

Dai, Shijie;
Liu, Shuyuan;
Ji, Wenbin;
Li, Shida

Publication type:

Article

Experimental investigations into groove bottom surface roughness for Zr-based bulk metallic glass by using milling.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 855, doi. 10.1007/s00170-022-10720-3

By:

Liu, Yin;
Song, Zhichao;
Liang, Zhengyi;
Cui, Xiaoqing;
Gong, Yadong;
Sun, Xingwei;
Dong, Zhixu;
Yang, Heran;
Liu, Weijun

Publication type:

Article

Ultrasonic energy attenuation characteristics in plastic deformation of 2219-O aluminum alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 267, doi. 10.1007/s00170-022-10715-0

By:

Li, Shuangli;
Zhao, Yixi;
Cui, Junhui;
Yu, Zhongqi;
Kou, Linyuan

Publication type:

Article

Experimental and numerical simulation on forming and thermal distribution of a new composite annular electrode joint.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 213, doi. 10.1007/s00170-022-10690-6

By:

Dewang, Zhao;
Chao, Zhang;
Daxin, Ren;
Kunmin, Zhao

Publication type:

Article

Development of multi-defect diagnosis algorithm for the directed energy deposition (DED) process with in situ melt-pool monitoring.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 357, doi. 10.1007/s00170-022-10711-4

By:

Shin, Hyewon;
Lee, Jimin;
Choi, Seung-Kyum;
Lee, Sang Won

Publication type:

Article

Study on material erosion mechanism of ultrasonic vibration-assisted micro-EDM based on heat-flow coupling analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 465, doi. 10.1007/s00170-022-10695-1

By:

Hou, Shaojie;
Bai, Jicheng;
Liu, Huan;
Zhou, Zimu;
Lu, Zhuang

Publication type:

Article

Application of MQL with cooled air and wheel cleaning jet for greener grinding process.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 435, doi. 10.1007/s00170-022-10712-3

By:

Daniel, Douglas Maiochi;
Moraes, Douglas Lyra de;
Garcia, Mateus Vinicius;
Lopes, José Claudio;
Rodriguez, Rafael Lemes;
Ribeiro, Fernando Sabino Fonteque;
Sanchez, Luiz Eduardo de Angelo;
Bianchi, Eduardo Carlos

Publication type:

Article

Illumination system optimal design for geometry measurement of complex cutting tools in machine vision.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 105, doi. 10.1007/s00170-022-10491-x

By:

Wang, Wenqi;
Liu, Wei;
Zhang, Yang;
Zhang, Peidong;
Si, Likun;
Zhou, Mengde

Publication type:

Article

Influence of the composition of separately laser-generated metal vapor on arc stability.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 679, doi. 10.1007/s00170-022-10708-z

By:

Henze, Insa;
Woizeschke, Peer

Publication type:

Article

Improving weld penetration by two-TIG arc activated via mixing oxygen into shielding gas.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 169, doi. 10.1007/s00170-022-10703-4

By:

Zhang, Jia;
Shao, Peize;
Wang, Xinxin;
Fan, Ding

Publication type:

Article

Optimal tolerance allocation for non-rigid assembly considering the effect of deformation on functional requirement and quality loss cost.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 493, doi. 10.1007/s00170-022-10687-1

By:

Ajani, Ibrahim;
Lu, Cong

Publication type:

Article

Electron beam weld penetration depth prediction improved by beam characterisation.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 399, doi. 10.1007/s00170-022-10682-6

By:

Yin, Yi;
Kennedy, Andrew;
Mitchell, Tim;
Sieczkiewicz, Norbert;
Jefimovs, Vitalijs;
Tian, Yingtao

Publication type:

Article

A dimensionless analysis to select directed energy deposition process parameters for proper clad formation.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 947, doi. 10.1007/s00170-022-10393-y

By:

Lim, Choon Wee Joel;
Zhang, Yanmei;
Huang, Sheng;
Chan, Wai Lee

Publication type:

Article

Improvement of product quality using negative clearance grooved punch.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 479, doi. 10.1007/s00170-022-10383-0

By:

Huang, Kuo-Ming;
Hsu, Ming-Huang;
Ramanuel, Joseph;
Chang, Chuan-Hsaing;
Wey, Jiang-Ming

Publication type:

Article

A chatter detection method in milling based on gray wolf optimization VMD and multi-entropy features.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 831, doi. 10.1007/s00170-022-10672-8

By:

Liu, Bo;
Liu, Changfu;
Zhou, Yang;
Wang, Daohai

Publication type:

Article

Experiment for improving the manufacturing process of composite material made serpentine pipe parts using ceramic lost foam mold.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 115, doi. 10.1007/s00170-022-10670-w

By:

Yang, Shang-Kuo;
Chen, Lei-Hu;
Chu, Wen-Lin

Publication type:

Article

Fatigue strength analysis of bimetallic sleeve roll by simulation of local slip accumulation at shrink-fit interface caused by roll rotation.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 369, doi. 10.1007/s00170-022-10669-3

By:

Noda, Nao-Aki;
Rafar, Rahimah Abdul;
Zheng, Xuchen;
Tsurumaru, Hiroyuki;
Taruya, Yudai;
Sano, Yoshikazu;
Takase, Yasushi

Publication type:

Article

Control policies of changeable manufacturing-remanufacturing systems using two failure-prone production facilities.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 279, doi. 10.1007/s00170-022-10664-8

By:

Assid, Morad;
Gharbi, Ali;
Hajji, Adnène

Publication type:

Article

Defect detection of 3D printing surface based on geometric local domain features.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 183, doi. 10.1007/s00170-022-10662-w

By:

Zhao, Xinyue;
Li, Quanzhi;
Xiao, Menghan;
He, Zaixing

Publication type:

Article