Works matching IS 02683768 AND DT 2023 AND VI 124 AND IP 5/6

Results: 40

A review of the parameter-signature-quality correlations through in situ sensing in laser metal additive manufacturing.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1401, doi. 10.1007/s00170-022-10618-0

By:

Ye, Jiayu;
Bab-hadiashar, Alireza;
Alam, Nazmul;
Cole, Ivan

Publication type:

Article

The spark plasma sintering of the optimized parametric process for the magnesium alloy reinforced hybrid nano-ceramics.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1875, doi. 10.1007/s00170-022-10617-1

By:

Fayomi, Juwon;
Popoola, Abimbola Patricia;
Popoola, Olawale;
Aigbodon, Victor;
Agboola, Oluranti

Publication type:

Article

Effect of process parameters on the deep drawing formability of aluminum and advanced high-strength steel square cups.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1827, doi. 10.1007/s00170-022-10616-2

By:

Mrabti, Iliass El;
Bouziane, Khalid;
Touache, Abdelhamid;
Hakimi, Abdelhadi El;
Chamat, Abderrahim;
Daya, Abdelmajid

Publication type:

Article

Design and development of a 3D printed water driven spinal posture corrector.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1457, doi. 10.1007/s00170-022-10611-7

By:

Ijaz, Malik Kishwat;
Shomenov, Kemel;
Otegen, Darkhan;
Shehab, Essam;
Ali, Md. Hazrat

Publication type:

Article

Manufacturing a prototype with laser direct metal deposition and laser welding made from martensitic steel 1.4313.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1993, doi. 10.1007/s00170-022-10606-4

By:

Dey, Indira;
Fabbri, Maicol;
Gemmet, Simon;
Dalaee, Mohammad;
Wessel, Mario;
Wegener, Konrad

Publication type:

Article

Hybrid 3D printing of multifunctional polylactic acid/carbon black nanocomposites made with material extrusion and post-processed with CO<sub>2</sub> laser cutting.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1843, doi. 10.1007/s00170-022-10604-6

By:

Kechagias, John D.;
Vidakis, Nectarios;
Ninikas, Konstantinos;
Petousis, Markos;
Vaxevanidis, Nikolaos M.

Publication type:

Article

Construction method of process model for correcting local profile errors of turbine blades.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1751, doi. 10.1007/s00170-022-10597-2

By:

Si, Chuan-Rui;
Zhu, Zheng-Qing;
Chen, Zhi-Tong;
Zhang, Yun

Publication type:

Article

Design of hole matrix unit for high-precision batch hole making of acoustic lining assembly of aero-engine.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1863, doi. 10.1007/s00170-022-10595-4

By:

Gong, Qinghong;
Li, Liang;
Luo, Pan;
Chen, Jie;
Yuan, Xinman;
Ma, Ke;
Hu, Zhiqin

Publication type:

Article

An image-based quantitative model of surface measurement complexity for on-machine measurement.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1473, doi. 10.1007/s00170-022-10585-6

By:

Fu, Gaocai;
Sheng, Buyun;
Lu, Yingkang;
Luo, Ruiping;
Sheng, Ganlin;
Huang, Yuzhe

Publication type:

Article

Effect of droplet transfer mode on composition homogeneity of twin-wire plasma arc additively manufactured titanium aluminide.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1723, doi. 10.1007/s00170-022-10592-7

By:

Xin, Jianwen;
Wu, Dongsheng;
Chen, Haiyao;
Wang, Lin;
Zhou, Wenlu;
Wu, Kanglong;
Zhang, Yuelong;
Shen, Chen;
Hua, Xueming;
Li, Fang

Publication type:

Article

Modeling the forming process by successive local deforming for monolithic stiffened panels.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1569, doi. 10.1007/s00170-022-10582-9

By:

Sikulskiy, Valeriy;
Sikulskyi, Stanislav;
Maiorova, Kateryna;
Dyachenko, Yuri

Publication type:

Article

Micro-cutting of holes by centrifugal force.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1437, doi. 10.1007/s00170-022-10581-w

By:

Kocovic, Vladimir;
Vukelic, Djordje;
Kostic, Sonja;
Bijelic, Ivan;
Prica, Miljana;
Tadić, Branko

Publication type:

Article

The relationship between adhesion morphology and cutting force in orthogonal cutting of 6061-T6 aluminum alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1971, doi. 10.1007/s00170-022-10591-8

By:

Ding, Yuxing;
Yu, Jianchao;
Lu, Zhikai

Publication type:

Article

Active temperature control method based on time grating principle for the feed system of precision machine tool and its application.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1537, doi. 10.1007/s00170-022-10594-5

By:

Zheng, Yingjie;
Gao, Weiguo;
Zhang, Dawei;
Huang, Tian;
Zhao, Xingyu;
Chen, Faze

Publication type:

Article

Straight turning optimization of low alloy steel using MCDM methods coupled with Taguchi approach.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1607, doi. 10.1007/s00170-022-10584-7

By:

Hadjela, Salah;
Belhadi, Salim;
Ouelaa, Nouredine;
Safi, Khaoula;
Yallese, Mohamed Athmane

Publication type:

Article

Grain refinement in semi-solid metal processing: current status and recent development.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1379, doi. 10.1007/s00170-022-10590-9

By:

Tajudin, Muhammad Faez Mohamad;
Ahmad, Asnul Hadi;
Alias, Juliawati;
Razak, Nur Azhani Abd;
Alang, Nasrul Azuan

Publication type:

Article

Abrasive fluidized bed finishing of additive manufactured cobalt-chrome parts: effects on surface morphology and fatigue behavior.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1939, doi. 10.1007/s00170-022-10580-x

By:

Atzeni, Eleonora;
Genna, Silvio;
Salmi, Alessandro;
Trovalusci, Federica;
Rubino, Gianluca

Publication type:

Article

Effect of particle size on friction signal characters when lapping quartz glass with fixed abrasive pad.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1591, doi. 10.1007/s00170-022-10589-2

By:

Zhang, Zhao;
Zheng, Yanling;
Wang, Zhankui;
Wang, Pengzhan;
Pang, Minghua;
Ma, Lijie;
Su, Jianxiu

Publication type:

Article

Experimental investigation of effective parameters on productivity improvement of the EDM process for corrosion-resistant metals.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1763, doi. 10.1007/s00170-022-10559-8

By:

Saberi, Mohammad Reza;
Ghandehariun, Amirmohammad

Publication type:

Article

Applications of data fusion in optical coordinate metrology: a review.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1341, doi. 10.1007/s00170-022-10576-7

By:

Zhang, Zhongyi Michael;
Catalucci, Sofia;
Thompson, Adam;
Leach, Richard;
Piano, Samanta

Publication type:

Article

Grinding performances of electroplated Ni–B-diamond tools prepared through composite electroplating with intermittent stirring.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1891, doi. 10.1007/s00170-022-10574-9

By:

Huang, Ching An;
Shen, Chia Hsuan;
Lee, Chung Juei;
Wang, Hai;
Lai, Po Liang

Publication type:

Article

Improving functional performance characteristics of spur gears through flank modifications by non-contact advanced finishing process.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1787, doi. 10.1007/s00170-022-10566-9

By:

Rana, Vivek;
Jain, Neelesh Kumar;
Pathak, Sunil

Publication type:

Article

A novel approach for the numerical analysis of in situ distortion in a component made by the directed energy deposition additive manufacturing process.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1925, doi. 10.1007/s00170-022-10562-z

By:

Pourabdollah, Pegah;
Farhang Mehr, Farzaneh;
Maijer, Daan M.;
Cockcroft, Steven L.

Publication type:

Article

Heat transfer mechanisms of nano-cutting fluids: a comparative performance analysis model.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1429, doi. 10.1007/s00170-022-10579-4

By:

Hegab, Hussien;
Kishawy, Hossam A.

Publication type:

Article

Build plate conduction cooling for thermal management of wire arc additive manufactured components.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1557, doi. 10.1007/s00170-022-10558-9

By:

Heinrich, Lauren;
Feldhausen, Thomas;
Saleeby, Kyle;
Kurfess, Thomas;
Saldaña, Christopher

Publication type:

Article

Clamping force model application on the aircraft structural assembly.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1951, doi. 10.1007/s00170-022-10555-y

By:

de Mello, Joao Marcos Gomes;
Trabasso, Luís Gonzaga;
Silva, André Vinícius Santos;
de Oliveira, Wesley Rodrigues

Publication type:

Article

Vacuum bag leak detection for resin infusion: an electric current–based analogy.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1775, doi. 10.1007/s00170-022-10552-1

By:

Esmaeili, Yussuf Reza;
Cosco, Brett;
Najjaran, Homayoun

Publication type:

Article

Analytical modeling of effective depth of cut for ductile materials via abrasive waterjet machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1813, doi. 10.1007/s00170-022-10538-z

By:

Chen, Jianfeng;
Yuan, Yemin;
Gao, Hang;
Zhou, Tianyi

Publication type:

Article

Advanced finite element model for predicting surface integrity in high-speed turning of AA7075-T6 under dry and cryogenic conditions.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1735, doi. 10.1007/s00170-022-10531-6

By:

Imbrogno, Stano;
Rotella, Giovanna;
Del Prete, Antonio

Publication type:

Article

Assessment of milling condition by image processing of the produced surfaces.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1681, doi. 10.1007/s00170-022-10516-5

By:

Carbone, Nicolas;
Bernini, Luca;
Albertelli, Paolo;
Monno, Michele

Publication type:

Article

Investigation on stability of robotic rotary ultrasonic edge milling component with poor rigidity.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1579, doi. 10.1007/s00170-022-10498-4

By:

Meng, Dan;
Sun, Hongwei;
Xiong, Weiwei;
Sun, Lianjun;
Liao, Wenhe;
Zheng, Kan

Publication type:

Article

Improved performance of a heterogeneous weld joint of copper-steel AISI 1045 obtained by rotary friction using a metal powder insert.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1905, doi. 10.1007/s00170-022-10326-9

By:

Bouarroudj, El-oualid;
Abdi, Said;
Miroud, Djamel

Publication type:

Article

Optimization of polishing path and material removal for uniform material removal in optical surface polishing.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1699, doi. 10.1007/s00170-022-10464-0

By:

Qu, Xingtian;
Liu, Qinglong;
Wang, Hongyi;
Liu, Haizhong;
Liu, Jiming;
Sun, Huichao

Publication type:

Article

Progress and prospect of diamond dynamic friction polishing technology.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1357, doi. 10.1007/s00170-022-10463-1

By:

Yang, Tiancheng;
Song, Dunlan;
Hao, Zhaopeng

Publication type:

Article

Modelling and analysis of energy consumption in glass molding process for smartphone covers using different heating strategies.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1491, doi. 10.1007/s00170-022-10442-6

By:

Ming, Wuyi;
Jiang, Zhiwen;
Chen, Zhijun;
He, Wenbin;
Li, Xiaoke

Publication type:

Article

A robot welding path planning and automatic programming method for open impeller.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1639, doi. 10.1007/s00170-022-10415-9

By:

Fang, Weihua;
Ding, Luguo;
Tian, Xincheng;
Zheng, Fuquan

Publication type:

Article

Full life-cycle cutting force prediction in ball helical milling based on oblique cutting analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1623, doi. 10.1007/s00170-022-10402-0

By:

Zhou, Zhitong;
Wang, Haiyan

Publication type:

Article

Mechanical behaviour of AlSi10Mg lattice structures manufactured by the Selective Laser Melting (SLM).

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1651, doi. 10.1007/s00170-022-10390-1

By:

Pirinu, Alessandra;
Primo, Teresa;
Del Prete, Antonio;
Panella, Francesco Willem;
De Pascalis, Fabio

Publication type:

Article

Design and capability test of symmetrical radial and transverse vibration ultrasonic cutting device.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1513, doi. 10.1007/s00170-022-10362-5

By:

Luo, Wenyu;
Pi, Jun;
Jiang, Tao;
Shen, Zhihuang;
Hou, Dapan;
Cao, Zhonghe;
Xue, Changsheng;
Liang, Zheming

Publication type:

Article

Three-level hierarchical micro/nanostructures on biopolymers by injection moulding using low-cost polymeric inlays.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1527, doi. 10.1007/s00170-022-10338-5

By:

Sáez-Comet, Carlos;
Muntada, Olga;
Lozano, Nekane;
Fontdecaba, Enric;
Sousa, Patricia;
Llobet, Jordi;
Perez-Murano, Francesc;
Puiggali, Jordi;
del Valle, Luis Javier

Publication type:

Article