Works matching IS 02683768 AND DT 2021 AND VI 112 AND IP 11/12

Results: 41

A new approach to assess delamination in drilling carbon fibre-reinforced epoxy composite materials.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3389, doi. 10.1007/s00170-021-06636-z

By:

Machado, Carla Moreira;
Silva, Duarte;
Vidal, Catarina;
Soares, Bruno;
Teixeira, Jorge Pamies

Publication type:

Article

Correction to: Removal mechanism of 2.5-dimensional carbon fiber reinforced ceramic matrix composites processed by nanosecond laser.

Published in:

2021

By:

Jiao, Haowen;
Chen, Bing;
Li, Shichun

Publication type:

Correction Notice

Evaluation of the cooling efficiency of pulse spray for high-pressure die casting processes.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3377, doi. 10.1007/s00170-021-06627-0

By:

Zhang, Jianyue;
Blowers, Kyler;
Zhao, Xuzhe;
Vian, Corey;
Rakita, Milan;
Han, Qingyou

Publication type:

Article

Mathematical and physical modeling of FE-SEM surface quality surrounded by the plasma channel within Al powder-mixed electrical discharge machining of Ti-6Al-4V.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3263, doi. 10.1007/s00170-021-06626-1

By:

Ilani, Mohsen Asghari;
Khoshnevisan, Mohammad

Publication type:

Article

Effect of angle deflection on deformation characteristic and mechanical property of electromagnetic riveted joint.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3529, doi. 10.1007/s00170-021-06621-6

By:

Duan, Liming;
Feng, Xuerui;
Cui, Junjia;
Li, Guangyao;
Jiang, Hao

Publication type:

Article

Cutting factors and testing of highly viscoelastic fluid abrasive flow machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3459, doi. 10.1007/s00170-021-06619-0

By:

Dong, Zhiguo;
Zhang, Yuchao;
Lei, Hongbo

Publication type:

Article

Application of conduction heating on hot stamping of front bumper.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3177, doi. 10.1007/s00170-021-06618-1

By:

Liang, Weikang;
Wang, Hailong;
Wang, Qianting;
Liu, Qiong;
Zhang, Yisheng

Publication type:

Article

Studying the residual stress homogenization and relief in aerospace rolling ring of GH4169 alloy using ageing treatment.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3415, doi. 10.1007/s00170-021-06612-7

By:

Lv, Nan;
Liu, Dong;
Yang, Yanhui;
Wang, Jianguo

Publication type:

Article

A high-frequency non-resonant elliptical vibration-assisted cutting device for diamond turning microstructured surfaces.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3247, doi. 10.1007/s00170-021-06608-3

By:

Wang, Zhengjian;
Luo, Xichun;
Liu, Haitao;
Ding, Fei;
Chang, Wenlong;
Yang, Liang;
Zhang, Jianguo;
Cox, Andrew

Publication type:

Article

A novel cutting tool selection approach based on a metal cutting process knowledge graph.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3201, doi. 10.1007/s00170-021-06606-5

By:

Duan, Yang;
Hou, Li;
Leng, Song

Publication type:

Article

Control of machining distortion stability in machining of monolithic aircraft parts.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3189, doi. 10.1007/s00170-021-06605-6

By:

Fan, Longxin;
Li, Liang;
Yang, Yinfei;
Zhao, Guolong;
Han, Ning;
Tian, Hui;
He, Ning

Publication type:

Article

Formation mechanism of tearing defects in machining Nomex honeycomb core.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3167, doi. 10.1007/s00170-021-06603-8

By:

Jiang, Jiaming;
Liu, Zhanqiang

Publication type:

Article

The use of TOPSIS-based-desirability function approach to optimize the balances among mechanical performances, energy consumption, and production efficiency of the arc welding process.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3545, doi. 10.1007/s00170-021-06601-w

By:

Zhao, Dawei;
Bezgans, Yuriy;
Vdonin, Nikita;
Du, Wenhao

Publication type:

Article

Numerical and experimental study on the ultrasonic-assisted soft abrasive flow polishing characteristics.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3215, doi. 10.1007/s00170-021-06598-2

By:

Ge, Jiang-qin;
Ren, Yi-le;
Xu, Xin-sheng;
Li, Chen;
Li, Zhi-an;
Xiang, Wen-feng

Publication type:

Article

Investigation on hole diameter non-uniformity of hole arrays by ultrasonic vibration-assisted EDM.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3083, doi. 10.1007/s00170-021-06597-3

By:

Zhang, Yuan;
Xie, Baocheng

Publication type:

Article

Comparison of the geometric accuracy of holes made in CFRP/Ti laminate by drilling and helical milling.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3343, doi. 10.1007/s00170-021-06594-6

By:

Wang, Ben;
Zhao, Hua;
Zhang, Fan;
Wang, Minghai;
Zheng, Yaohui

Publication type:

Article

Study on thrust force of ultrasonic-assisted vibration micro-hole drilling of titanium alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3399, doi. 10.1007/s00170-021-06588-4

By:

Gao, Guofu;
Yuan, Zhaojie;
Xia, Ziwen;
Fu, Zongxia;
Xiang, Daohui;
Zhao, Bo

Publication type:

Article

A comparative investigation of damage models for fracture prediction in two-point incremental forming.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3069, doi. 10.1007/s00170-020-06587-x

By:

Wang, Chenhao;
Daniel, William J. T.;
Lu, Haibo;
Liu, Sheng;
Meehan, Paul A.

Publication type:

Article

Effects of process parameters on jet electrochemical machining of SiC particle-reinforced aluminum matrix composites.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3351, doi. 10.1007/s00170-020-06586-y

By:

Ao, Sansan;
Qin, Xiangyang;
Li, Kangbai;
Luo, Zhen

Publication type:

Article

Performance evaluation of the edge preparation of tungsten carbide inserts applied to hard turning.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3515, doi. 10.1007/s00170-020-06585-z

By:

Ventura, Carlos E. H.;
Magalhães, Frederico C.;
Abrão, Alexandre M.;
Denkena, Berend;
Breidenstein, Bernd

Publication type:

Article

Energy assessment of different cooling technologies in Ti-6Al-4V milling.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3279, doi. 10.1007/s00170-020-06575-1

By:

Albertelli, Paolo;
Monno, Michele

Publication type:

Article

Fully coupled thermo-mechanical finite element modeling of friction stir processing of super duplex stainless steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3485, doi. 10.1007/s00170-020-06574-2

By:

Arafat, Md. Eyasin;
Al Badour, Fadi;
Merah, Neçar

Publication type:

Article

Heat transfer simulation and improvement of autoclave loading in composites manufacturing.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 2989, doi. 10.1007/s00170-020-06573-3

By:

Mirzaei, Shokoufeh;
Krishnan, Krishna;
Al Kobtawy, Charbel;
Roberts, Jeffrey;
Palmer, Eric

Publication type:

Article

The evaluation of profile errors of the leading and trailing edges of a thin-walled blade based on chord length deviation.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3053, doi. 10.1007/s00170-020-06569-z

By:

Feng, Qian;
Lin, Xiaojun;
Liang, Yongshou;
Wang, Zhiwei;
Ren, Junxue

Publication type:

Article

Feedrate scheduling of a five-axis hybrid robot for milling considering drive constraints.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3117, doi. 10.1007/s00170-020-06559-1

By:

Li, Guangxi;
Liu, Haitao;
Yue, Wei;
Xiao, Juliang

Publication type:

Article

Influences of thermal effects on residual stress fields of an aluminium-lithium alloy induced by shot peening.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3105, doi. 10.1007/s00170-020-06557-3

By:

Tao, Xuefei;
Gao, Yukui

Publication type:

Article

Study on the mechanisms of curved water jet fiber-guided laser technology.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3137, doi. 10.1007/s00170-020-06552-8

By:

Huang, Yuxing;
Yang, Linfan;
Liang, En;
Zhong, Zhixian;
Long, Yuhong

Publication type:

Article

Characterization of the cutting forces and friction behavior in machining UD-CFRP using slot milling test.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3471, doi. 10.1007/s00170-020-06544-8

By:

Sheikh-Ahmad, Jamal;
Almaskari, Fahad;
El-Hofy, Mohamed

Publication type:

Article

Effects of the granite-forming minerals on the surface roughness in the milling processes.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3041, doi. 10.1007/s00170-020-06534-w

By:

Cserta, Eszter;
Gyurika, István Gábor

Publication type:

Article

Cloud FEA of hot stamping processes using a software agnostic platform.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3445, doi. 10.1007/s00170-020-06533-x

By:

Zhu, Mingqing;
Lim, Yixian C.;
Cai, Zhaoheng;
Liu, Xiaochuan;
Dhawan, Saksham;
Liu, Jun;
Politis, Denis J.

Publication type:

Article

Induced network-based transfer learning in injection molding for process modelling and optimization with artificial neural networks.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3501, doi. 10.1007/s00170-020-06511-3

By:

Lockner, Yannik;
Hopmann, Christian

Publication type:

Article

Springback prediction model and its compensation method for the variable curvature metal tube bending forming.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3151, doi. 10.1007/s00170-020-06506-0

By:

Zhang, Shuyou;
Fu, Mengyu;
Wang, Zili;
Fang, Dingyu;
Lin, Weiming;
Zhou, Huifang

Publication type:

Article

The impact of macro/microstructure features on the mechanical properties of refill friction stir spot–welded joints of AA2219 alloy with a large thickness ratio.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3093, doi. 10.1007/s00170-020-06504-2

By:

Zou, Yangfan;
Li, Wenya;
Chu, Qiang;
Shen, Zhikang;
Wang, Feifan;
Tang, Huawei;
Vairis, Achilles;
Liu, Liyuan

Publication type:

Article

Removal mechanism of 2.5-dimensional carbon fiber reinforced ceramic matrix composites processed by nanosecond laser.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3017, doi. 10.1007/s00170-020-06499-w

By:

Jiao, Haowen;
Chen, Bing;
Li, Shichun

Publication type:

Article

An inverse procedure to estimate the heat flux at coated tool-chip interface: a 3D transient thermal model.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3327, doi. 10.1007/s00170-020-06498-x

By:

Oliveira, Gabriela Costa;
Ribeiro, Sidney Silveira;
Guimarães, Gilmar

Publication type:

Article

Effect of pulse current in manufacturing of cardiovascular stent using EDM die-sinking.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3031, doi. 10.1007/s00170-020-06484-3

By:

Pujiyulianto, Eko;
Suyitno

Publication type:

Article

Automated vision system for magnetic particle inspection of crankshafts using convolutional neural networks.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3307, doi. 10.1007/s00170-020-06467-4

By:

Tout, Karim;
Meguenani, Anis;
Urban, Jean-Philippe;
Cudel, Christophe

Publication type:

Article

Wheel orientation calculation for helical rake flank sharpening of broaching tools.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3431, doi. 10.1007/s00170-020-06451-y

By:

Jia, Kang;
Guo, Junkang;
Ma, Tao;
Nan, Kaigang;
Hong, Jun;
Zhang, Lei

Publication type:

Article

Analysis of eleven cross-roll straightening process of steel tube based on cubic spline function and continuous bending elastic-plastic theory.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3235, doi. 10.1007/s00170-020-06431-2

By:

Ma, Lidong;
Liu, Zijian;
Ma, Lifeng;
Du, Yukang

Publication type:

Article

Nonlinear mechanical model of the shaft of a roll forming mill and parameter identification.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3363, doi. 10.1007/s00170-020-06412-5

By:

Lamprecht, Matthias;
Koçbay, Emin;
Leonhartsberger, Martin;
Vetyukov, Yury;
Bleicher, Friedrich

Publication type:

Article

An optimized algorithm and the verification methods for improving the volumetric error modeling accuracy of precision machine tools.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 11/12, p. 3001, doi. 10.1007/s00170-020-06266-x

By:

Liu, Hui;
Ling, Si-ying;
Wang, Li-ding;
Yu, Zhen-jiang;
Wang, Xiao-dong

Publication type:

Article