Works matching IS 02683768 AND DT 2020 AND VI 111 AND IP 9/10

Results: 41

Fused filament fabrication of commercial conductive filaments: experimental study on the process parameters aimed at the minimization, repeatability and thermal characterization of electrical resistance.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2971, doi. 10.1007/s00170-020-06318-2

By:

Stano, Gianni;
Di Nisio, Attilio;
Lanzolla, Anna Maria;
Ragolia, Mattia;
Percoco, Gianluca

Publication type:

Article

Parametric study of composite curved adhesive joints.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2957, doi. 10.1007/s00170-020-06314-6

By:

Correia, J. M. C.;
Campilho, R. D. S. G.;
Rocha, R. J. B.;
Liu, Y.;
Ramalho, L. D. C.

Publication type:

Article

Development and characterization of an iron aluminide coating on mild steel substrate obtained by friction surfacing and heat treatment.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2569, doi. 10.1007/s00170-020-06310-w

By:

Troysi, Fernanda D.;
Brito, Pedro P.

Publication type:

Article

Effects of cutting parameters on roughness and residual stress of maraging steel specimens produced by additive manufacturing.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2449, doi. 10.1007/s00170-020-06309-3

By:

Oliveira, A. R.;
Jardini, A. L.;
Del Conte, E. G.

Publication type:

Article

Correction to: Printed and hybrid integrated electronics using bio-based and recycled materials—increasing sustainability with greener materials and technologies.

Published in:

2020

By:

Välimäki, Marja K.;
Sokka, Laura I.;
Peltola, Heidi B.;
Ihme, Sami S.;
Rokkonen, Teijo M. J.;
Kurkela, Timo J.;
Ollila, Jyrki T.;
Korhonen, Arttu T.;
Hast, Jukka T.

Publication type:

Correction Notice

Study on tool wear mechanism and cutting performance in helical milling of CFRP with stepped bi-directional milling cutters.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2441, doi. 10.1007/s00170-020-06305-7

By:

Chen, Tao;
Wang, Changhong;
Xiang, Jiupeng;
Wang, Yongsheng

Publication type:

Article

Predict the flow stress of the hardness for AISI 4340.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2499, doi. 10.1007/s00170-020-06304-8

By:

Meng, Jie;
He, Gaofa

Publication type:

Article

Dynamic characterization of Ti-4Al-1.5Mn titanium alloy and a simplified approach for shot peening simulation.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2733, doi. 10.1007/s00170-020-06299-2

By:

Su, Nan;
Chen, Minghe;
Xie, Lansheng;
Shi, Wenxiang;
Luo, Feng

Publication type:

Article

Finish boring process of hard alloy cutter based on electrostatic cooling-aided machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2999, doi. 10.1007/s00170-020-06298-3

By:

Cheng, Hongchuan;
Zhao, Juan;
Sun, Ruowang;
Liu, Songnian;
Yang, Zhou

Publication type:

Article

A novel finite element simulation of hot stamping process of DP780 steel based on the Chaboche thermomechanically hardening model.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2705, doi. 10.1007/s00170-020-06297-4

By:

Hajbarati, Hamid;
Zajkani, Asghar

Publication type:

Article

A cylindrical profile measurement method for cylindricity and coaxiality of stepped shaft.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2845, doi. 10.1007/s00170-020-06296-5

By:

Sun, Chuanzhi;
Wang, Hongye;
Liu, Yongmeng;
Wang, Xiaoming;
Wang, Baosheng;
Li, Chengtian;
Tan, Jiubin

Publication type:

Article

An experimental and numerical study of feasibility of a novel technology to manufacture hot stamping dies with pre-constructed tube network.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2919, doi. 10.1007/s00170-020-06280-z

By:

Zheng, Kailun;
Tong, Chenpeng;
Li, Yong;
Lin, Jianguo;
Kolozsvari, Zoltan Ciaba;
Dean, Trevor A.

Publication type:

Article

Numerical study on the ceramic tool abrasion in machining superalloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2601, doi. 10.1007/s00170-020-06293-8

By:

Luo, Yue;
Tong, Jiawei;
Chen, Rui;
Tang, Xinzi;
Peng, Ruitao

Publication type:

Article

A prediction method of mechanical product assembly precision based on the fusion of measured samples and assembly feature fidelity samples.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2877, doi. 10.1007/s00170-020-06289-4

By:

Li, Heng;
Qiu, Lemiao;
Wang, Zili;
Zhang, Shuyou;
Wang, Yang;
Tan, Jianrong

Publication type:

Article

Readiness of subtractive and additive manufacturing and their sustainable amalgamation from the perspective of Industry 4.0: a comprehensive review.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2475, doi. 10.1007/s00170-020-06287-6

By:

Iqbal, Asif;
Zhao, Guolong;
Suhaimi, Hazwani;
He, Ning;
Hussain, Ghulam;
Zhao, Wei

Publication type:

Article

Effects of cutting edge radius on cutting force, tool wear, and life in milling of SUS-316L steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2833, doi. 10.1007/s00170-020-06286-7

By:

Lv, Dejin;
Wang, Yongguo;
Yu, Xin

Publication type:

Article

A comprehensive study on thermal modeling of SLM process under conduction mode using FEM.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2939, doi. 10.1007/s00170-020-06294-7

By:

Papazoglou, E. L.;
Karkalos, N. E.;
Markopoulos, A. P.

Publication type:

Article

An iteration-based algorithm for two-pass flute grinding of slide round milling tools.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2533, doi. 10.1007/s00170-020-06278-7

By:

Chen, Zhan;
Liu, Xianli;
He, Genghuang;
Yue, Caixu;
Wang, Lihui;
Liang, Steven Y.

Publication type:

Article

Effect of ultrasonic vibration on cavitation erosion of aluminum oxide in fluid jet machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2911, doi. 10.1007/s00170-020-06275-w

By:

Lv, Zhe;
Hou, Rongguo;
Zhang, Zhongwei;
Fan, Zenghua

Publication type:

Article

Study on the transient response to the point-to-point motion controls on a dual-axes air-bearing planar stage.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2759, doi. 10.1007/s00170-020-06274-x

By:

Kuo, Fan-Chun;
Hsu, Chekang;
Hsieh, Meng-Ru;
Yen, Jia-Yush;
Chen, Liang-Chia;
Chung, Tien-Tung;
Wang, Fu-Cheng

Publication type:

Article

Comparative study on the cutting performance of self-propelled rotary cutters and indexable cutters in milling TC11 titanium alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2749, doi. 10.1007/s00170-020-06273-y

By:

Chen, Tao;
Wang, Yongsheng;
Gao, Weijie;
Li, Rui

Publication type:

Article

A novel method for measuring squareness errors of multi-axis machine tools based on spherical S-shaped trajectories using a double ball bar.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2773, doi. 10.1007/s00170-020-06271-0

By:

Jiang, Xiaogeng;
Jia, Jingwei;
Liu, Chang;
Wang, Hao

Publication type:

Article

Modeling and simulation of workpiece surface flatness in magnetorheological plane finishing processes.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2637, doi. 10.1007/s00170-020-06267-w

By:

Liu, Zhanbin;
Li, Jianyong;
Nie, Meng;
Liu, Yueming

Publication type:

Article

Variation propagation modelling in multistage machining processes using dual quaternions.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2987, doi. 10.1007/s00170-020-06263-0

By:

Yacob, Filmon;
Semere, Daniel

Publication type:

Article

Establishment of material removal model for lapping ceramic balls with variable-radius groove plate.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2577, doi. 10.1007/s00170-020-06259-w

By:

Zhou, Fenfen;
Yao, Weifeng;
Yuan, Julong;
Li, Fan;
Lyu, Binghai;
Zhao, Ping

Publication type:

Article

Less interference tool-path planning method for quarter revolution penetration and retraction trajectories in internal cylindrical thread helical milling.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2687, doi. 10.1007/s00170-020-06253-2

By:

Hu, Zihua;
Tang, Yiran;
Fan, Yuanhao;
Qin, Changjiang;
Zhang, Xudong;
Zou, Yeming;
Chen, Xiaogao

Publication type:

Article

Synthesis of Ni-Cr-B-Si-Fe-based interlayer alloy for transient liquid phase bonding of Inconel 718 superalloy by mechanical alloying process.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2857, doi. 10.1007/s00170-020-06251-4

By:

Tarai, U. K.;
Robi, P. S.;
Pal, Sukhomay

Publication type:

Article

Heat transfer and metal flow behavior of AA7075 high-strength aluminum alloy in a new current-induced friction stir welding with a multi-physics field model based on the inverse method and parameter scanning batch processing technique.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2615, doi. 10.1007/s00170-020-06249-y

By:

Luo, J.;
Xiang, J. F.;
Yuan, L.;
Lin, H. X.;
Wu, X. R.;
Xie, D. Z.

Publication type:

Article

Autonomous seam recognition and feature extraction for multi-pass welding based on laser stripe edge guidance network.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2719, doi. 10.1007/s00170-020-06246-1

By:

Wu, Kaixuan;
Wang, Tianqi;
He, Junjie;
Liu, Yang;
Jia, Zhenwei

Publication type:

Article

Development of a mobile application for monitoring and controlling a CNC machine using Industry 4.0 concepts.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2545, doi. 10.1007/s00170-020-06245-2

By:

de Souza, Adriano Fagali;
Martins, Juliana;
Maiochi, Henrique;
Juliani, Aline Durrer Patelli;
Jaskowiak, Pablo Andretta

Publication type:

Article

Review of non-conventional technologies for assisting ultra-precision single-point diamond turning.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2667, doi. 10.1007/s00170-020-06240-7

By:

Hatefi, Shahrokh;
Abou-El-Hossein, Khaled

Publication type:

Article

Integration of single and dual command operations in non-traditional warehouse design.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2461, doi. 10.1007/s00170-020-06235-4

By:

Bortolini, Marco;
Galizia, Francesco Gabriele;
Gamberi, Mauro;
Gualano, Francesco

Publication type:

Article

Fabrication and synthesis of SnO<sub>X</sub> thin films: a review.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2809, doi. 10.1007/s00170-020-06223-8

By:

Nwanna, Emeka Charles;
Imoisili, Patrick Ehi;
Jen, Tien-Chien

Publication type:

Article

A study on surface morphology and tension in laser powder bed fusion of Ti-6Al-4V.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2891, doi. 10.1007/s00170-020-06221-w

By:

Khorasani, Mahyar;
Ghasemi, AmirHossein;
Awan, Umar Shafique;
Hadavi, Elahe;
Leary, Martin;
Brandt, Milan;
Littlefair, Guy;
O'Neil, William;
Gibson, Ian

Publication type:

Article

Optimization of processing parameters in fiber laser cladding.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2553, doi. 10.1007/s00170-020-06214-9

By:

Mohammed, Sayeed;
Zhang, Zhe;
Kovacevic, Radovan

Publication type:

Article

Microstructural evaluation of WC and steel dissimilar bilayered composite obtained by spark plasma sintering.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2405, doi. 10.1007/s00170-020-06210-z

By:

Hasan, Mahadi;
Huang, Zhenyi;
Zhao, Jingwei;
Jumlat, Al;
Jia, Fanghui;
Wu, Hui;
Jiang, Zhengyi

Publication type:

Article

A surrogate-assisted optimization approach for multi-response end milling of aluminum alloy AA3105.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2419, doi. 10.1007/s00170-020-06209-6

By:

Ghosh, Tamal;
Wang, Yi;
Martinsen, Kristian;
Wang, Kesheng

Publication type:

Article

Cutting parameter optimization of Al-6063-O using numerical simulations and particle swarm optimization.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2507, doi. 10.1007/s00170-020-06200-1

By:

Osorio-Pinzon, Juan Camilo;
Abolghasem, Sepideh;
Marañon, Alejandro;
Casas-Rodriguez, Juan Pablo

Publication type:

Article

Investigation of surface roughness in face milling processes.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2589, doi. 10.1007/s00170-020-06188-8

By:

Raza, Muhammad Huzaifa;
Hafeez, Faisal;
Zhong, Ray Y.;
Imran, Asif

Publication type:

Article

Machinability and cutting force modeling of 7055 aluminum alloy with wide temperature range based on dry cutting.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2787, doi. 10.1007/s00170-020-06177-x

By:

Zhang, Ping;
Cao, Xian;
Zhang, Xiancheng;
Wang, Youqiang

Publication type:

Article

Micro-electrode wear and compensation to ensure the dimensional consistency accuracy of micro-hole array in micro-EDM drilling.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2653, doi. 10.1007/s00170-020-05811-y

By:

Huan, Liu;
Jicheng, Bai;
Yan, Cao;
Guozheng, Zhu;
Shaojie, Hou

Publication type:

Article