Works matching IS 02683768 AND DT 2018 AND VI 97 AND IP 5-8

Results: 120

Study on micro helical milling of small holes with flat end mills.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 3119, doi. 10.1007/s00170-018-2187-3

By:

Cheng, Xiang;
Zhang, Xi;
Tian, Yebing;
Zheng, Guangming;
Yang, Xianhai

Publication type:

Article

NURBS toolpath planning for glass sharp corner edge grinding.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2997, doi. 10.1007/s00170-018-2176-6

By:

Ren, Kun;
Xu, Kai;
Chen, Wenhua

Publication type:

Article

A nonuniform moving heat source model for temperature simulation in ultrasonic-assisted cutting of titanium alloys.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 3009, doi. 10.1007/s00170-018-2174-8

By:

Chen, Jianbin;
Xu, Menghui;
Xie, Chao;
Du, Jianke;
Dai, Houfu;
Fang, Qihong

Publication type:

Article

Influence of pin imperfections on the tensile and fatigue behaviour of AA 7075-T6 friction stir lap welds.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 3129, doi. 10.1007/s00170-018-2172-x

By:

Balakrishnan, M.;
Leitão, C.;
Arruti, E.;
Aldanondo, E.;
Rodrigues, D. M.

Publication type:

Article

Transformable parallel-serial manipulator for robotic machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2987, doi. 10.1007/s00170-018-2170-z

By:

Lai, Chow Yin;
Villacis Chavez, David Ernesto;
Ding, Songlin

Publication type:

Article

Inconel®718 superalloy machinability evaluation after laser cladding additive manufacturing process.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2873, doi. 10.1007/s00170-018-2169-5

By:

Calleja, Amaia;
Urbikain, Gorka;
González, Haizea;
Cerrillo, Iker;
Polvorosa, Roberto;
Lamikiz, Aitzol

Publication type:

Article

Direct metal laser sintering of TiN reinforced Ti6Al4V alloy based metal matrix composite: Fabrication and characterization.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2635, doi. 10.1007/s00170-018-2159-7

By:

Kundu, Sudip;
Hussain, Manowar;
Kumar, Vikas;
Kumar, Shakti;
Das, Alok Kumar

Publication type:

Article

Experimental and numerical investigation of the effects of deep cold rolling on the bending fatigue tolerance of C38500 brass alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 3039, doi. 10.1007/s00170-018-2165-9

By:

Mombeini, Daniel;
Atrian, Amir

Publication type:

Article

An investigation on surface functional parameters in ultrasonic-assisted grinding of soft steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2697, doi. 10.1007/s00170-018-2164-x

By:

Chen, Haifeng;
Tang, Jinyuan;
Shao, Wen;
Zhao, Bo

Publication type:

Article

Effect of corrosion pit density on the fatigue life of aluminum 1050A.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 3163, doi. 10.1007/s00170-018-2163-y

By:

Adjel, S.;
Merakeb, N.;
Benchouia, S.;
Ehlers, S.;
Baccouche, M.

Publication type:

Article

Development of an index model for oil canning of steel sheet metal forming products.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 3023, doi. 10.1007/s00170-018-2162-z

By:

Kim, Honglae;
Al-Saeedi, Salman;
Jang, Changsoon;
Quagliato, Luca;
Kim, Naksoo

Publication type:

Article

Enhancement of rolling bearing fault diagnosis based on improvement of empirical mode decomposition denoising method.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 3099, doi. 10.1007/s00170-018-2167-7

By:

Abdelkader, Rabah;
Kaddour, Abdelhafid;
Derouiche, Ziane

Publication type:

Article

Metalock crack sanation.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2557, doi. 10.1007/s00170-018-2155-y

By:

Marić, Dejan;
Duspara, Miroslav;
Cumin, Josip;
Samardžić, Ivan

Publication type:

Article

Experimental and numerical study of the mechanical behavior and kinetics of the martensitic transformation in 304L TRIP steel: applied to folding.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2757, doi. 10.1007/s00170-018-2154-z

By:

Sidhoum, Z.;
Ferhoum, R.;
Almansba, M.;
Bensaada, R.;
Habak, M.;
Aberkane, M.

Publication type:

Article

Comparison of selected processes for surface microstructuring of complex mould for an implanted device.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2741, doi. 10.1007/s00170-018-2152-1

By:

Zhang, Yang;
Hansen, Hans Nørgaard;
Bissacco, Giuliano;
Biondani, Francesco

Publication type:

Article

A review of force reduction methods in precision forging axisymmetric shapes.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2809, doi. 10.1007/s00170-018-2151-2

By:

Politis, Denis J.;
Politis, Nicholas J.;
Lin, Jianguo;
Dean, Trevor A.

Publication type:

Article

Optimization of material removal rate and tool wear rate of Cu electrode in die-sinking EDM of tool steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2647, doi. 10.1007/s00170-018-2150-3

By:

Straka, Ľuboslav;
Hašová, Slavomíra

Publication type:

Article

Alternative methods for the simultaneous monitoring of simple linear profile parameters.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2851, doi. 10.1007/s00170-018-2149-9

By:

Mahmood, Tahir;
Riaz, Muhammad;
Hafidz Omar, M.;
Xie, Min

Publication type:

Article

Effect of process parameters on mechanical properties of friction stir welded dissimilar 7075-T651 and 5083-H111 aluminum alloys.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2767, doi. 10.1007/s00170-018-2147-y

By:

Kalemba-Rec, Izabela;
Kopyściański, Mateusz;
Miara, Damian;
Krasnowski, Krzysztof

Publication type:

Article

Multiple-order permutation flow shop scheduling under process interruptions.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2781, doi. 10.1007/s00170-018-2146-z

By:

Rahman, Humyun Fuad;
Sarker, Ruhul;
Essam, Daryl

Publication type:

Article

Micro reciprocated wire-EDM of micro-rotating structure combined multi-cutting strategy.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2703, doi. 10.1007/s00170-018-2145-0

By:

Chen, Xiang;
Wang, Zhenlong;
Wang, Yukui;
Chi, Guanxin;
Guo, Cheng

Publication type:

Article

Densification, surface morphology, microstructure and mechanical properties of 316L fabricated by hybrid manufacturing.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2687, doi. 10.1007/s00170-018-2144-1

By:

Yang, Yuying;
Gong, Yadong;
Qu, Shuoshuo;
Rong, Yulong;
Sun, Yao;
Cai, Ming

Publication type:

Article

Friction stir spot welding thin acrylonitrile butadiene styrene sheets using pinless tool.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2749, doi. 10.1007/s00170-018-2143-2

By:

Yan, Yinfei;
Shen, Yifu;
Hou, Wentao;
Li, Junping

Publication type:

Article

Dielectric flushing optimization of fast hole EDM drilling based on debris status analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2409, doi. 10.1007/s00170-018-2141-4

By:

Wang, Zhiqiang;
Tong, Hao;
Li, Yong;
Li, Chaojiang

Publication type:

Article

Sustainable supplier evaluation and selection with a novel two-stage DEA model in the presence of uncontrollable inputs and undesirable outputs: a plastic case study.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2933, doi. 10.1007/s00170-018-2138-z

By:

Zarbakhshnia, Navid;
Jaghdani, Tina Jamali

Publication type:

Article

EDM multi-pulse temperature field simulation of SiC/Al functionally graded materials.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2501, doi. 10.1007/s00170-018-2136-1

By:

Tang, L.;
Ren, L.;
Zhu, Q. L.

Publication type:

Article

Experimental grinding of cubic zirconia with grooved and non-grooved diamond discs.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 3087, doi. 10.1007/s00170-018-2135-2

By:

Xu, Lin-hong;
Xu, Qing;
Rao, Jian-hua;
Han, Yuan

Publication type:

Article

Cathode cross tank and return hole optimization design and experiment verification of electrochemical machining closed integral impeller outside flow channels.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2921, doi. 10.1007/s00170-018-2132-5

By:

Tang, L.;
Feng, X.;
Zhao, G. G.;
Li, Q. L.;
Zhao, J. S.;
Ren, L.

Publication type:

Article

Passive filling friction stir repairing AZ31-B magnesium alloy by external stationary shoulder.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2461, doi. 10.1007/s00170-018-2130-7

By:

Niu, Shiyu;
Wu, Baosheng;
Ma, Lin;
Lv, Zan;
Yan, Dejun

Publication type:

Article

An approach for improving the machining efficiency and quality of aerospace curved thin-walled parts during five-axis NC machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2477, doi. 10.1007/s00170-018-2129-0

By:

Jiang, Xiaohui;
Lu, Weiwei;
Zhang, Zhenya

Publication type:

Article

A force-measuring-based approach for feed rate optimization considering the stochasticity of machining allowance.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2545, doi. 10.1007/s00170-018-2127-2

By:

Zhang, Zhongxi;
Luo, Ming;
Zhang, Dinghua;
Wu, Baohai

Publication type:

Article

A quasi-dynamic model for high-speed ball spinning.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2447, doi. 10.1007/s00170-018-2126-3

By:

Chunjiang, Zhao;
Guanghui, Li;
Jie, Xiong;
Zhengyi, Jiang;
Qingxue, Huang;
Jianmei, Wang;
Hailong, Cui

Publication type:

Article

Thermal deformation prediction of high-speed motorized spindle based on biogeography optimization algorithm.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 3141, doi. 10.1007/s00170-018-2123-6

By:

Zhang, Lixiu;
Gong, Weijing;
Zhang, Ke;
Wu, Yuhou;
An, Dong;
Shi, Huaitao;
Shi, Qinghua

Publication type:

Article

Experimental study on SiCp/Al composites with different volume fractions in high-speed milling with PCD tools.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2731, doi. 10.1007/s00170-018-2122-7

By:

Huang, Shutao;
Guo, Lin;
He, Huanhu;
Yang, Haicheng;
Su, Ying;
Xu, Lifu

Publication type:

Article

An experimental and theoretical analysis of surface generation in the ultra-precision grinding of hard and brittle materials.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2715, doi. 10.1007/s00170-018-2121-8

By:

Chen, Shan Shan;
Cheung, Chi Fai;
Zhang, Fei Hu

Publication type:

Article

Research on the forming quality and mechanical properties of cylindrical spun parts with ultrafine-grained structure during power spinning.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2979, doi. 10.1007/s00170-018-2119-2

By:

Xiao, Gangfeng;
Xia, Qinxiang;
Long, Jinchuan;
Chen, Weiping

Publication type:

Article

Statistical analysis of dimensional accuracy in additive manufacturing considering STL model properties.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2835, doi. 10.1007/s00170-018-2117-4

By:

Baturynska, Ivanna

Publication type:

Article

Pattern design of fixed abrasive pads inspired by the bee colony theory.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2563, doi. 10.1007/s00170-018-2114-7

By:

Fang, Congfu;
Yan, Zhen;
Hu, Zhongwei;
Lin, Yanfen;
Zhao, Zaixing

Publication type:

Article

Optimization of laser-assisted joining through an integrated experimental-simulation approach.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2655, doi. 10.1007/s00170-018-2113-8

By:

Lambiase, F.;
Genna, S.;
Kant, R.

Publication type:

Article

Reduction of corner radius of cylindrical parts by magnetic force under various loading methods.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2667, doi. 10.1007/s00170-018-2111-x

By:

Cui, Xiaohui;
Yu, Hailiang;
Wang, Qingshan

Publication type:

Article

Optimal adaptive Kanban-type production control.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2887, doi. 10.1007/s00170-018-2110-y

By:

Xanthopoulos, A. S.;
Ioannidis, S.;
Koulouriotis, D. E.

Publication type:

Article

The constant temperature control system of multi-pass and die-less shear spinning by flame heating.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2439, doi. 10.1007/s00170-018-2109-4

By:

Han, Z. R.;
Fan, Z. J.;
Xiao, Y.;
Jia, Z.

Publication type:

Article

Electromagnetic impulse calibration in V-shaped parts.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2959, doi. 10.1007/s00170-018-2108-5

By:

Cui, Xiaohui;
Yu, Hailiang;
Wang, Qingshan

Publication type:

Article

Analysis and prediction on geometric characteristics of multi-track overlapping laser cladding.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2397, doi. 10.1007/s00170-018-2107-6

By:

Lian, Guofu;
Yao, Mingpu;
Zhang, Yang;
Chen, Changrong

Publication type:

Article

Evaluation of microstructure, microhardness, and electrochemical properties of laser-deposited Ti-Co coatings on Ti-6Al-4V Alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2341, doi. 10.1007/s00170-018-2106-7

By:

Fatoba, O. S.;
Adesina, O. S.;
Popoola, A. P. I.

Publication type:

Article

Influence of the incremental deformation during rotary forging on the microstructure behaviour of a nickel-based superalloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2383, doi. 10.1007/s00170-018-2105-8

By:

Loyda, A.;
Reyes, L. A.;
Hernández-Muñoz, G. M.;
García-Castillo, F. A.;
Zambrano-Robledo, P.

Publication type:

Article

Residual stress development in selective laser-melted Ti6Al4V: a parametric thermal modelling approach.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2621, doi. 10.1007/s00170-018-2104-9

By:

Ali, Haider;
Ghadbeigi, Hassan;
Mumtaz, Kamran

Publication type:

Article

The penetration efficiency of thick plate laser-arc hybrid welding.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2907, doi. 10.1007/s00170-018-2103-x

By:

Bunaziv, Ivan;
Frostevarg, Jan;
Akselsen, Odd M.;
Kaplan, Alexander F.H.

Publication type:

Article

Mechanical and thermal properties of friction-stir welded joints of high density polyethylene using a non-rotational shoulder tool.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2489, doi. 10.1007/s00170-018-2102-y

By:

Moreno-Moreno, Mirley;
Macea Romero, Yorledis;
Rodríguez Zambrano, Habib;
Restrepo-Zapata, Nora Catalina;
Afonso, Conrado Ramos Moreira;
Unfried-Silgado, Jimy

Publication type:

Article

Performance evaluation of novel chamfered inserts in high-feed turning of Ti-6Al-4V alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2319, doi. 10.1007/s00170-018-2101-z

By:

Khan, Sarmad Ali;
Afzal, Muhammad Zubair;
Saleem, Muhammad Qaiser;
Hashmi, Khalid Hussain;
Ghulam, Zakria

Publication type:

Article