Works matching IS 02683768 AND DT 2017 AND VI 92 AND IP 1-4

Results: 120

Multi-sensor process analysis and performance characterisation in CNC turning-a cyber physical system approach.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 855, doi. 10.1007/s00170-017-0113-8

By:

Morgan, Jeff;
O'Donnell, Garret

Publication type:

Article

Optimization of process parameters in micro-EDM of Ti-6Al-4V based on full factorial design.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 167, doi. 10.1007/s00170-017-0103-x

By:

Alavi, Farshid;
Jahan, Muhammad

Publication type:

Article

An experimental analysis of a flaring process for tube ends using a novel spinning tool.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 157, doi. 10.1007/s00170-017-0106-7

By:

Khalil Hazawi, Ahmed;
Abdel-Magied, Ragab;
Elsheikh, Mohamad

Publication type:

Article

Design and evaluation of high-pressure nozzle assembly for laser cutting of thick carbon steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 15, doi. 10.1007/s00170-017-0107-6

By:

Marimuthu, S.;
Nath, A.;
Dey, P.;
Misra, D.;
Bandyopadhyay, D.;
Chaudhuri, S.

Publication type:

Article

Complex phenomena study in dielectric fluid from gap during the W-EDM processing in ultrasonic field.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 197, doi. 10.1007/s00170-017-0114-7

By:

Nani, Viorel-Mihai

Publication type:

Article

Materials characterization part I: contact area of the Berkovich indenter for nanoindentation tests.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 361, doi. 10.1007/s00170-017-0115-6

By:

Jamal, M.;
Morgan, M.

Publication type:

Article

Thermo-mechanical analysis in pulsed laser cladding of WC powder on Inconel 718.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 69, doi. 10.1007/s00170-017-0117-4

By:

Javid, Y.;
Ghoreishi, M.

Publication type:

Article

Analyzing drivers of risks in electronic supply chains: a grey-DEMATEL approach.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 1127, doi. 10.1007/s00170-017-0118-3

By:

Rajesh, R.;
Ravi, V.

Publication type:

Article

Experimental investigations of the influence of laser beam and plasma arc cutting parameters on edge quality of high-strength low-alloy (HSLA) strips and plates.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 699, doi. 10.1007/s00170-017-0119-2

By:

Klimpel, Andrzej;
Cholewa, Wojciech;
Bannister, Adam;
Luksa, Krzysztof;
Przystałka, Piotr;
Rogala, Tomasz;
Skupnik, Damian;
Cicero, Sergio;
Martín-Meizoso, Antonio

Publication type:

Article

Using Barkhausen noise to measure coating depth of coated high -speed steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 247, doi. 10.1007/s00170-017-0120-9

By:

Seemuang, N.;
Slatter, T.

Publication type:

Article

An analytical investigation on the wrinkling of aluminium alloys during stamping using macro-scale structural tooling surfaces.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 481, doi. 10.1007/s00170-017-0121-8

By:

Zheng, Kailun;
Lee, Junyi;
Politis, Denis;
Li, Nan;
Lin, Jianguo;
Dean, Trevor

Publication type:

Article

Flow characteristics of accelerating pump in hydraulic-type wind power generation system under different wind speeds.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 189, doi. 10.1007/s00170-017-0122-7

By:

Fangwei, Xie;
Rui, Xuan;
Gang, Sheng;
Cuntang, Wang

Publication type:

Article

A digital process optimization, process design and process informatics system for high-energy abrasive mass finishing.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 303, doi. 10.1007/s00170-017-0124-5

By:

Jamal, M.;
Morgan, M.;
Peavoy, D.

Publication type:

Article

Productivity improvement under manufacturing environment using Shainin system and fuzzy analytical hierarchy process: a case study.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 407, doi. 10.1007/s00170-017-0123-6

By:

Mittal, Kapil;
Tewari, Puran;
Khanduja, Dinesh

Publication type:

Article

Evolution of milled cavity in the multiple laser scans of titanium alloy under a flowing water layer.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 293, doi. 10.1007/s00170-017-0125-4

By:

Tangwarodomnukun, Viboon;
Wuttisarn, Taweeporn

Publication type:

Article

Production of CuSn10 bronze powder from machining chips using jet milling.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 663, doi. 10.1007/s00170-017-0126-3

By:

Afshari, Elham;
Ghambari, Mohammad;
Abdolmalek, Hamid

Publication type:

Article

Electromagnetic superposed forming of large-scale one-dimensional curved AA2524-T3 sheet specimen.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 25, doi. 10.1007/s00170-017-0127-2

By:

Long, Anlin;
Wan, Min;
Wang, Wenping;
Wu, Xiangdong;
Cui, Xuexi;
Fang, Chunping

Publication type:

Article

Method for recognizing wave dynamics damage in high-speed milling cutter.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 139, doi. 10.1007/s00170-017-0128-1

By:

Jiang, Bin;
He, Tiantian;
Gu, Yunpeng;
Wang, Qilong;
Cao, Guanglei

Publication type:

Article

Online detection method of weld penetration based on molten pool morphology and metallic vapor radiation for fiber laser welding.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 231, doi. 10.1007/s00170-017-0129-0

By:

Sheng, Jie;
Cai, Yan;
Li, Fang;
Hua, Xueming

Publication type:

Article

Generating spiral tool paths based on spiral enter assistant line.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 869, doi. 10.1007/s00170-017-0130-7

By:

Liu, Zhiping;
Li, Xiongbing;
Song, Yongfeng;
Yi, Bing

Publication type:

Article

A flexible process information reuse method for similar machining feature.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 217, doi. 10.1007/s00170-017-0131-6

By:

Liu, Jinfeng;
Zhou, Honggen;
Xiaojun, Liu;
Jing, Xuwen

Publication type:

Article

Experimental study on minimal nanolubrication with surfactant in the turning of titanium alloys.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 117, doi. 10.1007/s00170-017-0133-4

By:

Mahboob Ali, Mohd;
Azmi, Azwan;
Mohd Khalil, Ahmad;
Leong, Kean

Publication type:

Article

Analysis of ball-burnishing impact on barrier properties of wood workpieces.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 129, doi. 10.1007/s00170-017-0134-3

By:

Vukelic, Djordje;
Tadic, Branko;
Dzunic, Dragan;
Kocovic, Vladimir;
Brzakovic, Ljiljana;
Zivkovic, Milutin;
Simunovic, Goran

Publication type:

Article

Measurement default diagnostics of a roughness meter with TS100 head using a rectified specimen and solved by fuzzy logic estimator.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 673, doi. 10.1007/s00170-017-0136-1

By:

Bloul, B.;
Bourdim, A.;
Aour, B.;
Harhout, R.

Publication type:

Article

Effect of mechanical vibration on Ra, Rq, Rz, and Rt roughness parameters.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 393, doi. 10.1007/s00170-017-0137-0

By:

Dobes, Jefferson;
Leal, Jose;
Profeta, Jonas;
Sousa, Marcos;
Neto, Francisco;
Piratelli-Filho, Antonio;
Arencibia, Rosenda

Publication type:

Article

Binder jetting advanced ceramics for metal-ceramic composite structures.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 531, doi. 10.1007/s00170-017-0139-y

By:

Snelling, Dean;
Williams, Christopher;
Suchicital, Carlos;
Druschitz, Alan

Publication type:

Article

Frictional and wear performance of hard coatings during machining of superduplex stainless steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 423, doi. 10.1007/s00170-017-0141-4

By:

Paiva, José;
Torres, Ricardo;
Amorim, Fred;
Covelli, Danielle;
Tauhiduzzaman, Mohammed;
Veldhuis, Stephen;
Dosbaeva, Goulnara;
Fox-Rabinovich, German

Publication type:

Article

A review identifying the effectiveness of minimum quantity lubrication (MQL) during conventional machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 321, doi. 10.1007/s00170-017-0142-3

By:

Boswell, B.;
Islam, M.N.;
Davies, Ian;
Ginting, Y.;
Ong, Ai

Publication type:

Article

Broken rotor bar fault diagnosis using fast Fourier transform applied to field-oriented control induction machine: simulation and experimental study.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 917, doi. 10.1007/s00170-017-0143-2

By:

Ameid, Tarek;
Menacer, Arezki;
Talhaoui, Hicham;
Harzelli, Imadeddine

Publication type:

Article

Probabilistic method in form error evaluation: comparison of different approaches.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 447, doi. 10.1007/s00170-017-0144-1

By:

Chiabert, Paolo;
Maddis, Manuela;
Ruffa, Suela;
Yusupov, Jambul

Publication type:

Article

Determination of an adequate geometry of the flanged hole to perform formed threads.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 547, doi. 10.1007/s00170-017-0145-0

By:

Masmoudi, Narjes;
Soussi, Hela;
Krichen, Abdelkader

Publication type:

Article

Observation of a unique wear morphology of cBN inserts during machining of titanium metal matrix composites (Ti-MMCs); leading to new insights into their machinability.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 519, doi. 10.1007/s00170-017-0146-z

By:

Aramesh, Maryam;
Attia, Helmi;
Kishawy, Hossam;
Balazinski, Marek

Publication type:

Article

Modelling of friction stir welding of DH36 steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 341, doi. 10.1007/s00170-017-0147-y

By:

Al-moussawi, M.;
Smith, A.;
Young, A.;
Cater, S.;
Faraji, M.

Publication type:

Article

Evaluation of modified jatropha-based oil with hexagonal boron nitride particle as a biolubricant in orthogonal cutting process.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 371, doi. 10.1007/s00170-017-0148-x

By:

Talib, N.;
Sasahara, H.;
Rahim, E.

Publication type:

Article

Surface grinding of CFRP composites with rotary ultrasonic machining: a mechanistic model on cutting force in the feed direction.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 1217, doi. 10.1007/s00170-017-0149-9

By:

Ning, Fuda;
Cong, Weilong;
Wang, Hui;
Hu, Yingbin;
Hu, Zhonglue;
Pei, Zhijian

Publication type:

Article

Evaluation of cold wire addition effect on heat input and productivity of tandem submerged arc welding for low-carbon microalloyed steels.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 817, doi. 10.1007/s00170-017-0150-3

By:

Mohammadijoo, Mohsen;
Collins, Laurie;
Henein, Hani;
Ivey, Douglas

Publication type:

Article

Measurement's noise, filtered by a type-1 neuro-fuzzy technique in quality assurance.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 755, doi. 10.1007/s00170-017-0151-2

By:

Montes Dorantes, Pascual;
Jiménez Gómez, Marco;
Mexicano Santoyo, Adriana;
Méndez, Gerardo

Publication type:

Article

Analytical study of critical thrust force for on-set delamination damage of drilling hybrid carbon/glass composite.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 929, doi. 10.1007/s00170-017-0152-1

By:

Tan, Chye;
Azmi, Azwan

Publication type:

Article

Highlighting cutting mechanisms encountered in carbon/epoxy composite drilling using orthogonal cutting.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 685, doi. 10.1007/s00170-017-0153-0

By:

Turki, Y.;
Habak, M.;
Velasco, R.;
Vantomme, P.

Publication type:

Article

Multi-objective warehouse building design to optimize the cycle time, total cost, and carbon footprint.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 839, doi. 10.1007/s00170-017-0157-9

By:

Accorsi, Riccardo;
Bortolini, Marco;
Gamberi, Mauro;
Manzini, Riccardo;
Pilati, Francesco

Publication type:

Article

Experimental and numerical investigation of flange angle in Chain-die formed AHSS U-channel sections.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 1231, doi. 10.1007/s00170-017-0159-7

By:

Qian, Zhen;
Sun, Yong;
Meehan, Paul;
Daniel, William;
Ding, Shichao

Publication type:

Article

Applying gray fuzzy logic to decide the weight ratio of activating flux during activated MIG aluminum alloy butt-joint welding.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 471, doi. 10.1007/s00170-017-0161-0

By:

Lin, Hsuan-Liang

Publication type:

Article

Surface feature formation mechanism during finish milling of gray cast iron.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 459, doi. 10.1007/s00170-017-0162-z

By:

Odum, Kyle;
Raymond, Nicholas;
Pell, Derek;
Soshi, Masakazu

Publication type:

Article

Weld characterization of laser arc hybrid welding of pure copper.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 561, doi. 10.1007/s00170-017-0163-y

By:

Gong, Mengcheng;
Kawahito, Yosuke;
Gao, Ming;
Zeng, Xiaoyan

Publication type:

Article

The effect of process and geometric parameters on longitudinal edge strain and product defects in cold roll forming.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 743, doi. 10.1007/s00170-017-0164-x

By:

Abeyrathna, Buddhika;
Rolfe, Bernard;
Weiss, Matthias

Publication type:

Article

Surface roughness prediction as a classification problem using support vector machine.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 803, doi. 10.1007/s00170-017-0165-9

By:

Abu-Mahfouz, Issam;
El Ariss, Omar;
Esfakur Rahman, A.;
Banerjee, Amit

Publication type:

Article

Spot nanofinishing using ball nose magnetorheological solid rotating core tool.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 1173, doi. 10.1007/s00170-017-0166-8

By:

Khurana, Akshay;
Singh, Anant;
Bedi, Talwinder

Publication type:

Article

Fabrication of microgrooves with varied cross-sections by electrochemical micromachining.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 505, doi. 10.1007/s00170-017-0167-7

By:

Rathod, V.;
Doloi, B.;
Bhattacharyya, B.

Publication type:

Article

Development of high efficiency infrared-heating-assisted micro-injection molding for fabricating micro-needle array.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 831, doi. 10.1007/s00170-017-0169-5

By:

Gao, Shan;
Qiu, Zhongjun;
Ma, Zhuang;
Yang, Yujun

Publication type:

Article

Application and correction of L-shaped thin-wall aluminum in flexible-bending processing.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 981, doi. 10.1007/s00170-017-0170-z

By:

Zhou, Yongping;
Li, Pengfei;
Li, Mingzhe;
Wang, Liyan

Publication type:

Article