Works matching IS 02683768 AND DT 2015 AND VI 78 AND IP 5-8

Results: 60

Design of an electrochemical micromachining machine.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 737, doi. 10.1007/s00170-014-6332-3

By:

Spieser, Alexandre;
Ivanov, Atanas

Publication type:

Article

Feature classification of high-volume SiCp/Al composites under the condition of two-dimensional cutting based on cluster analysis theory.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 677, doi. 10.1007/s00170-014-6521-0

By:

Jiao, Keru;
Huang, Shutao;
Xu, Lifu;
Zhou, Dejin

Publication type:

Article

Microtexture fabrication on cylindrical metallic surfaces and its application to a rotor-bearing system.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 1021, doi. 10.1007/s00170-014-6648-z

By:

Hao, Xiuqing;
Pei, Shiyuan;
Wang, Li;
Xu, Hua;
He, Ning;
Lu, Bingheng

Publication type:

Article

The kinematics and error modelling of a novel micro-CMM.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 961, doi. 10.1007/s00170-014-6566-0

By:

Rugbani, Ali;
Schreve, Kristiaan

Publication type:

Article

Influence of cutting speed and tool wear on the surface integrity of the titanium alloy Ti-1023 during milling.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 1113, doi. 10.1007/s00170-014-6593-x

By:

Houchuan, Yang;
Zhitong, Chen;
ZiTong, Zhou

Publication type:

Article

Study on governing parameters of thermal history during underwater friction stir welding.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 1101, doi. 10.1007/s00170-014-6615-8

By:

Papahn, Hossein;
Bahemmat, Pouya;
Haghpanahi, Mohammad;
Sommitsch, Christof

Publication type:

Article

Automatic process planning of mold components with integration of feature recognition and group technology.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 807, doi. 10.1007/s00170-014-6627-4

By:

Jong, Wen-Ren;
Lai, Po-Jung;
Chen, Yu-Wei;
Ting, Yu-Hung

Publication type:

Article

A research on ultrasonic-assisted abrasive waterjet polishing of hard-brittle materials.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 1361, doi. 10.1007/s00170-014-6528-6

By:

Lv, Zhe;
Huang, Chuanzhen;
Zhu, Hongtao;
Wang, Jun;
Wang, Yong;
Yao, Peng

Publication type:

Article

Optimal condition-based maintenance policy for a partially observable system with two sampling intervals.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 795, doi. 10.1007/s00170-014-6651-4

By:

Naderkhani ZG, Farnoosh;
Makis, Viliam

Publication type:

Article

Integrated cell formation and layout problem considering multi-row machine arrangement and continuous cell layout with aisle distance.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 687, doi. 10.1007/s00170-014-6652-3

By:

Forghani, Kamran;
Mohammadi, Mohammad;
Ghezavati, Vahidreza

Publication type:

Article

A new method for nondestructive quality evaluation of the resistance spot welding based on the radar chart method and the decision tree classifier.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 841, doi. 10.1007/s00170-014-6654-1

By:

Zhang, Hongjie;
Hou, Yanyan;
Zhang, Jianye;
Qi, Xiangyang;
Wang, Fujun

Publication type:

Article

Solving a multi-objective open shop problem for multi-processors under preventive maintenance.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 707, doi. 10.1007/s00170-014-6660-3

By:

Azadeh, A.;
Farahani, M.;
Kalantari, S.;
Zarrin, M.

Publication type:

Article

A novel tool path generation algorithm for plane envelope grinding convex surface based on constant scallop height method.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 1087, doi. 10.1007/s00170-014-6668-8

By:

Wang, Shao-lei;
Lin, Bin;
Zhang, Xiao-feng;
Liang, Jian-ming;
Wang, Yan

Publication type:

Article

Weld-bonding of 6061 aluminium alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 863, doi. 10.1007/s00170-014-6670-1

By:

Khan, Md;
Sharma, Gaurav;
Dwivedi, D.

Publication type:

Article

Framework for the integration of assembly modeling and simulation based on assembly feature pair.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 765, doi. 10.1007/s00170-014-6671-0

By:

Zhang, Jie;
Xu, Zhijia;
Li, Yuan;
Jiang, Shoushan

Publication type:

Article

Implementation of cross-generation automation transportation system in the TFT-LCD industry.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 753, doi. 10.1007/s00170-014-6673-y

By:

Chang, Dong;
Lai, Shun

Publication type:

Article

A numerical approach to modeling keyhole laser welding.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 723, doi. 10.1007/s00170-014-6674-x

By:

Pastras, Georgios;
Fysikopoulos, Apostolos;
Giannoulis, Christos;
Chryssolouris, George

Publication type:

Article

Influence of additional tensile force on the stress and deformation of numerically controlled tube bending.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 895, doi. 10.1007/s00170-014-6675-9

By:

E., Daxin;
Li, Rongting

Publication type:

Article

The effect of chip breaker geometry on chip shape, bending moment, and cutting force: FE analysis and experimental study.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 917, doi. 10.1007/s00170-014-6676-8

By:

Lotfi, Mohammad;
Akhavan Farid, Ali;
Soleimanimehr, Hamid

Publication type:

Article

Process characterisation of 3D-printed FDM components using improved evolutionary computational approach.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 781, doi. 10.1007/s00170-014-6679-5

By:

Vijayaraghavan, V.;
Garg, A.;
Lam, Jasmine;
Panda, B.;
Mahapatra, S.

Publication type:

Article

Experimental and numerical analysis of a rectangular helical coil actuator for electromagnetic bulging.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 825, doi. 10.1007/s00170-014-6680-z

By:

Kim, Ji;
Kim, Daeyong;
Lee, Myoung-Gyu

Publication type:

Article

Research on the grain refinement method of cylindrical parts by power spinning.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 971, doi. 10.1007/s00170-014-6686-6

By:

Xiao, Gangfeng;
Xia, Qinxiang;
Cheng, Xiuquan;
Zhou, Yujing

Publication type:

Article

Study on manufacturing of W-Cu alloy thin wall parts by selective laser melting.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 885, doi. 10.1007/s00170-014-6689-3

By:

Song, Changhui;
Yang, Yongqiang;
Liu, Yang;
Luo, Ziyi;
Yu, Jia-Kuo

Publication type:

Article

Design and evaluation of a high-speed and precision microspindle.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 997, doi. 10.1007/s00170-014-6690-x

By:

Li, W.;
Zhou, Z.;
Xiao, H.;
Zhang, B.

Publication type:

Article

Virtual tryout and optimization of the extrusion die for an aluminum profile with complex cross-sections.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 927, doi. 10.1007/s00170-014-6691-9

By:

Zhang, Cunsheng;
Zhao, Guoqun;
Guan, Yanjin;
Gao, Anjiang;
Wang, Lanjun;
Li, Peng

Publication type:

Article

The stability of 30-μm-diameter water jet for jet-guided laser machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 939, doi. 10.1007/s00170-014-6692-8

By:

Ng, Eddie;
Guannan, Du

Publication type:

Article

Laser transmission welding of polycarbonates: experiments, modeling, and sensitivity analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 853, doi. 10.1007/s00170-014-6693-7

By:

Acherjee, Bappa;
Kuar, Arunanshu;
Mitra, Souren;
Misra, Dipten

Publication type:

Article

Investigation of wrinkling failure mechanics in metal spinning by Box-Behnken design of experiments using finite element method.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 981, doi. 10.1007/s00170-014-6694-6

By:

Watson, M.;
Long, H.;
Lu, B.

Publication type:

Article

Optimal policies for integrated inventory system under fuzzy random framework.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 947, doi. 10.1007/s00170-014-6695-5

By:

Soni, Hardik;
Patel, Kamlesh

Publication type:

Article

Improvement of toolpath quality combining polynomial interpolation with reduction of toolpath points.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 875, doi. 10.1007/s00170-014-6696-4

By:

Bouchenitfa, Hichem;
Chaves-Jacob, Julien;
Linares, Jean-Marc;
Sprauel, Jean-Michel;
Azzam, Noureddine;
Boukebbab, Salim

Publication type:

Article

Study on springback in micro V-bending with consideration of grain heterogeneity.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 1075, doi. 10.1007/s00170-014-6697-3

By:

Fang, Zhi;
Jiang, Zhengyi;
Wei, Dongbin;
Liu, Xianghua

Publication type:

Article

Drawability and frictional behavior of pure molybdenum sheet in deep-drawing process at elevated temperature.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 1005, doi. 10.1007/s00170-014-6698-2

By:

Meng, B.;
Fu, M.;
Wan, M.

Publication type:

Article

A novel Bi-processing technique for metal matrix nanocomposites.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 907, doi. 10.1007/s00170-014-6699-1

By:

Ali, Ashraf;
El-Meniawi, M.;
Khafagi, S.

Publication type:

Article

Multi-objective optimization design method for the machine tool's structural parts based on computer-aided engineering.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 1053, doi. 10.1007/s00170-014-6700-z

By:

Liu, Shihao

Publication type:

Article

A novel fine-blanking approach.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 1015, doi. 10.1007/s00170-014-6701-y

By:

Wang, Jang-Ping

Publication type:

Article

Numerical simulation of AZ31B magnesium alloy in DE-GMAW welding process.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 1259, doi. 10.1007/s00170-014-6703-9

By:

Zhang, Chaoyang;
Ma, Guohong;
Nie, Jun;
Ye, Jia

Publication type:

Article

Sustainable manufacturing process planning.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 1347, doi. 10.1007/s00170-014-6705-7

By:

Shojaeipour, Shahed

Publication type:

Article

Surface roughness modeling using RSM for HSLA steel by coated carbide tools.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 1031, doi. 10.1007/s00170-014-6707-5

By:

Azam, Muhammad;
Jahanzaib, Mirza;
Wasim, Ahmad;
Hussain, Salman

Publication type:

Article

Closed-loop automatic feedback control in electron beam melting.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 1193, doi. 10.1007/s00170-014-6708-4

By:

Mireles, Jorge;
Terrazas, Cesar;
Gaytan, Sara;
Roberson, David;
Wicker, Ryan

Publication type:

Article

An experimental investigation into the micro-electro-discharge machining behaviour of aluminium alloy (AA 2024).

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 1127, doi. 10.1007/s00170-014-6712-8

By:

Jahan, M.;
Kakavand, Pegah;
Kwang, E.;
Rahman, M.;
Wong, Y.

Publication type:

Article

Calibration of the cutting process and compensation of the compliance error by using on-machine probing.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 1043, doi. 10.1007/s00170-014-6714-6

By:

Guiassa, R.;
Mayer, J.;
St-Jacques, P.;
Engin, S.

Publication type:

Article

Modeling machining of particle-reinforced aluminum-based metal matrix composites using cohesive zone elements.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 1171, doi. 10.1007/s00170-014-6715-5

By:

Umer, U.;
Ashfaq, M.;
Qudeiri, J.;
Hussein, H.;
Danish, S.;
Al-Ahmari, A.

Publication type:

Article

Dynamic modeling for thermal error in motorized spindles.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 1141, doi. 10.1007/s00170-014-6716-4

By:

Wang, Baomin;
Mei, Xuesong;
Wu, Zaixin;
Zhu, Fei

Publication type:

Article

Optimization of cutter posture based on cutting force prediction for five-axis machining with ball-end cutters.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 1289, doi. 10.1007/s00170-014-6719-1

By:

Geng, L.;
Liu, P.;
Liu, K.

Publication type:

Article

Mechanical truing of V-shape diamond wheels for micro-structured surface grinding.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 1067, doi. 10.1007/s00170-014-6721-7

By:

Guo, Bing;
Zhao, Qingliang

Publication type:

Article

Experimental research on the energy ratio coefficient and specific grinding energy in nanoparticle jet MQL grinding.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 1275, doi. 10.1007/s00170-014-6722-6

By:

Zhang, Dongkun;
Li, Changhe;
Zhang, Yanbin;
Jia, Dongzhou;
Zhang, Xiaowei

Publication type:

Article

Selective element fission approach for fast FEM simulation of incremental sheet forming based on dual-mesh system.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 1147, doi. 10.1007/s00170-014-6723-5

By:

Zhang, M.;
Lu, B.;
Chen, J.;
Long, H.;
Ou, H.

Publication type:

Article

Maintenance policy determination for a complex system consisting of series and cold standby system with multiple levels of maintenance action.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 1337, doi. 10.1007/s00170-014-6727-1

By:

Jamshidi, R.;
Esfahani, Mir

Publication type:

Article

Modeling and analysis of grinding forces based on the single grit scratch.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 1223, doi. 10.1007/s00170-014-6729-z

By:

Azizi, Abdolhamid;
Mohamadyari, Mehrdad

Publication type:

Article

Investigation of friction in end-milling of Ti-6Al-4V under different green cutting conditions.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 78, n. 5-8, p. 1181, doi. 10.1007/s00170-014-6730-6

By:

Liu, ZhiQiang;
Chen, Ming;
An, QingLong

Publication type:

Article