Works matching DE "TENSION loads"

Results: 940

Evaluation of Axial Performance of Hollow Bar Micropiles Constructed with Different Drill Bit to Hollow Bar Diameter Ratio.

Published in:

Geotechnical & Geological Engineering, 2021, v. 39, n. 5, p. 3669, doi. 10.1007/s10706-021-01718-x

By:

Abdlrahem, Maged A.;
El Naggar, M. Hesham

Publication type:

Article

An approach for response prediction of a single pile subjected to tension load considering modulus degradation of soil.

Published in:

Geotechnical & Geological Engineering, 2020, v. 38, n. 2, p. 1195, doi. 10.1007/s10706-019-01081-y

By:

Cui, Chun-yu;
Wang, Shu-jian;
Liu, Qiang;
Zhang, Yu-long

Publication type:

Article

Investigation of native cellulose under high pressure using microfocused synchrotron radiation.

Published in:

Cellulose, 2024, v. 31, n. 5, p. 2705, doi. 10.1007/s10570-023-05581-2

By:

Storm, Selina L. S.;
Krywka, Christina;
Burghammer, Manfred;
di Cola, Emanuela;
Müller, Martin

Publication type:

Article

Experiments and numerical simulations of new biaxially loaded specimens to characterize the behavior of thin metal sheets.

Published in:

PAMM: Proceedings in Applied Mathematics & Mechanics, 2016, v. 16, n. 1, p. 125, doi. 10.1002/pamm.201610051

By:

Gerke, Steffen;
Schmidt, Marco;
Brünig, Michael

Publication type:

Article

Optimal Control of Large Deformation Elasticity by Fiber Tension.

Published in:

PAMM: Proceedings in Applied Mathematics & Mechanics, 2014, v. 14, n. 1, p. 879, doi. 10.1002/pamm.201410420

By:

Günnel, Andreas;
Herzog, Roland

Publication type:

Article

Modelling and Simulation of Asphalt.

Published in:

PAMM: Proceedings in Applied Mathematics & Mechanics, 2014, v. 14, n. 1, p. 249, doi. 10.1002/pamm.201410112

By:

Wimmer, Johannes;
Schnepp, Johannes;
Reese, Stefanie

Publication type:

Article

On the ageing behaviour of NBR: chemomechanical experiments, modelling and simulation of tension set.

Published in:

Continuum Mechanics & Thermodynamics, 2020, v. 32, n. 2, p. 369, doi. 10.1007/s00161-018-0728-5

By:

Musil, Bruno;
Johlitz, Michael;
Lion, Alexander

Publication type:

Article

A variational approach for a nonlinear one-dimensional damage-elasto-plastic second-gradient continuum model.

Published in:

Continuum Mechanics & Thermodynamics, 2016, v. 28, n. 1/2, p. 119, doi. 10.1007/s00161-014-0405-2

By:

Placidi, Luca

Publication type:

Article

Negative extensibility metamaterials: phase diagram calculation.

Published in:

Computational Mechanics, 2018, v. 62, n. 4, p. 669, doi. 10.1007/s00466-017-1520-2

By:

Klein, John T.;
Karpov, Eduard G.

Publication type:

Article

Numerical Investigation of Member Stiffness in Composite Sandwich Bolted Connections.

Published in:

Strength of Materials, 2023, v. 55, n. 5, p. 986, doi. 10.1007/s11223-023-00590-9

By:

Soukaina, O.;
Hamid, M.;
Bachir, H.

Publication type:

Article

Controlled Reduction of Residual Stresses in Vibration-Treated Welded Structures.

Published in:

Strength of Materials, 2023, v. 55, n. 1, p. 100, doi. 10.1007/s11223-023-00506-7

By:

Degtyarev, V. O.

Publication type:

Article

Strength Criteria of Obliquely Wound Composite Tubes Under Biaxial Tension.

Published in:

Strength of Materials, 2021, v. 53, n. 5, p. 765, doi. 10.1007/s11223-021-00342-7

By:

Polilov, A. N.;
Vlasov, D. D.;
Sklemina, O. Yu.;
Tatus', N. A.

Publication type:

Article

Elastoplastic Assessment of Limiting Internal Pressure in Thick-Walled Cylinders with Different Tension-Compressive Response.

Published in:

Strength of Materials, 2019, v. 51, n. 4, p. 508, doi. 10.1007/s11223-019-00096-3

By:

Wang, S.;
Zhu, Q.;
Zhao, J. H.;
Yue, X. P.;
Jiang, Y. J.

Publication type:

Article

Effect of Temperature on the Damage Kinetics of Pre-Deformed Steel 10GN2MFA Under Cyclic Loading in a Complex Stress State.

Published in:

Strength of Materials, 2016, v. 48, n. 5, p. 713, doi. 10.1007/s11223-016-9815-7

By:

Giginyak, F.;
Bulakh, P.

Publication type:

Article

An Experimental Study of the Dynamic Split Tension Properties of Reinforced Concrete.

Published in:

Strength of Materials, 2016, v. 48, n. 1, p. 63, doi. 10.1007/s11223-016-9738-3

By:

Zhao, Z.;
Jing, L.;
Pei, Q.;
Ma, H.;
Wang, Z.

Publication type:

Article

Relationship Between the Threshold Stress Intensity Factor Ranges of the Material and the Transition From Short to Long Fatigue Crack.

Published in:

Strength of Materials, 2014, v. 46, n. 3, p. 360, doi. 10.1007/s11223-014-9558-2

By:

Herasymchuk, O.

Publication type:

Article

Effects of Geometrical Parameters on the Stress Field of Three-Dimensional Plates Weakened by Periodic Notches.

Published in:

Strength of Materials, 2014, v. 46, n. 3, p. 391, doi. 10.1007/s11223-014-9561-7

By:

Amini, A.;
Afshar, R.;
Berto, F.

Publication type:

Article

Methodology of Studying Mechanical Properties of Reinforced Concrete.

Published in:

Inorganic Materials, 2019, v. 55, n. 15, p. 1533, doi. 10.1134/S0020168519150044

By:

Eryshev, V. A.

Publication type:

Article

Experimental Study on the Time-Dependent Resistance of Open-Ended Steel Piles in Sand.

Published in:

Geotechnics, 2024, v. 4, n. 4, p. 985, doi. 10.3390/geotechnics4040050

By:

Manthey, Sven;
Vogt, Stefan;
Cudmani, Roberto;
Kidane, Mussie

Publication type:

Article

Location of Tension Cracks at Slope Crests in Stability Analysis of Slopes.

Published in:

Geotechnics, 2022, v. 2, n. 3, p. 488, doi. 10.3390/geotechnics2030024

By:

Zhang, Tan;
Lin, Songtao;
Zheng, Hong;
Zhang, Dianjie

Publication type:

Article

Behavior of Reinforcing Bar Connection of Hollow-Core Slabs to Steel Beams under In-Plane Forces.

Published in:

CivilEng, 2022, v. 3, n. 4, p. 831, doi. 10.3390/civileng3040048

By:

Brito, Susana Hernandez;
Mahmoud, Karam;
El-Salakawy, Ehab F.

Publication type:

Article

Numerical and Experimental Investigation of Anchor Channels Subjected to Tension Load in Composite Slabs with Profiled Steel Decking.

Published in:

CivilEng, 2022, v. 3, n. 2, p. 296, doi. 10.3390/civileng3020018

By:

Bogdanić, Anton;
Casucci, Daniele;
Ožbolt, Joško

Publication type:

Article

Optical interferometry based micropipette aspiration provides real-time sub-nanometer spatial resolution.

Published in:

Communications Biology, 2021, v. 4, n. 1, p. 1, doi. 10.1038/s42003-021-02121-1

By:

Berardi, Massimiliano;
Bielawski, Kevin;
Rijnveld, Niek;
Gruca, Grzegorz;
Aardema, Hilde;
van Tol, Leni;
Wuite, Gijs;
Akca, B. Imran

Publication type:

Article

COMPARISON BETWEEN CONCRETE STRESS DIAGRAMS ACCORDING TO THE BRAZILIAN STANDARD ABNT NBR 6118: 2014.

Published in:

Acta Polytechnica CTU Proceedings, 2022, v. 33, p. 424, doi. 10.14311/APP.2022.33.0424

By:

DALOSTO DE OLIVEIRA, VICTOR HUGO;
ALVES CARVALHO, RODOLFO;
FERREIRA BORGES, LUANA;
DE REZENDE MARTINS, PAULO CHAVES;
RABELO NEVES, RODOLFO;
DE ALMEIDA SIQUEIRA, JOÃO PAULO;
DA SILVA OLIVEIRA, GABRIEL YVES;
AZEVEDO DE LIZ ANHAIA, CINTIA ADRIANA

Publication type:

Article

In-situ Full Scale Load Tests and Estimation Method of Pile Resistance for Nodular Diaphragm Wall Supporting High-rise Tower.

Published in:

Geotechnical Engineering (00465828), 2019, v. 50, n. 3, p. 48

By:

Watanabe, K.;
Sudo, T.

Publication type:

Article

A Study on Behavior of Vertical Pile in Sand under Uplift Load.

Published in:

Geotechnical Engineering (00465828), 2018, v. 49, n. 3, p. 12

By:

Saravanan, R.;
Arumairaj, P. D.;
Subramani, T.

Publication type:

Article

Use of Pressure Relief Wells to Optimise Ground Improvement Layer Thickness in Deep Excavations.

Published in:

Geotechnical Engineering (00465828), 2017, v. 48, n. 2, p. 9

By:

Pittaro, Gerardo Agustin

Publication type:

Article

足尺T形梁弯剪耦合性能试验研究.

Published in:

Guangdong Architecture Civil Engineering, 2022, v. 29, n. 3, p. 104, doi. 10.19731/j.gdtmyjz.2022.03.027

By:

张娟

Publication type:

Article

输电塔单变双角钢过渡节点试验研究与计算方法.

Published in:

Journal of Architecture & Civil Engineering, 2022, v. 39, n. 2, p. 69, doi. 10.19815/j.jace.2021.04016

By:

徐再根;
郑为东;
刘俊才;
刘文棚;
田利

Publication type:

Article

Experimental and performance analysis of carbon/carbon bolt.

Published in:

Vibroengineering Procedia, 2024, v. 55, p. 273, doi. 10.21595/vp.2024.24146

By:

Jingyi Zhou;
Jiale Shi

Publication type:

Article

Vibration of thin elastic FGM plates with multi-gradation effects.

Published in:

Vibroengineering Procedia, 2019, v. 23, p. 24, doi. 10.21595/vp.2019.20707

By:

Sator, Ladislav;
Sladek, Vladimir;
Sladek, Jan

Publication type:

Article

Seismic resistance of horizontal underground openings in anisotropic rocks.

Published in:

Vibroengineering Procedia, 2016, v. 8, p. 231

By:

Musayev, Janat;
Zhauyt, Algazy;
Sagatbek, Manap;
Matikhan, Nurali;
Kaliyev, Yerbol;
Naurushev, Batyr

Publication type:

Article

Numerical simulation of the coil spring and investigation the impact of tension and compression to the spring natural frequencies.

Published in:

Vibroengineering Procedia, 2016, v. 8, p. 108

By:

Sorokin, F. D.;
Zhou Su

Publication type:

Article

Bottom-up Geopolitics and Everyday Brexits at the Gibraltar-Spain Border.

Published in:

Geopolitics, 2022, v. 27, n. 5, p. 1528, doi. 10.1080/14650045.2020.1860941

By:

Bono, Federica;
Stoffelen, Arie

Publication type:

Article

Interaction factors for two elliptical embedded cracks with a wide range of aspect ratios.

Published in:

AIMS Materials Science, 2017, v. 4, n. 2, p. 328, doi. 10.3934/matersci.2017.2.328

By:

Kisaburo Azuma;
Yinsheng Li

Publication type:

Article

Elastic-plastic defect interaction in (a)symmetrical double edge notched tension specimens.

Published in:

AIMS Materials Science, 2017, v. 4, n. 2, p. 277, doi. 10.3934/matersci.2017.2.277

By:

Samadian, Kaveh;
Hertelé, Stijn;
De Waele, Wim

Publication type:

Article

'Archetypal Load of Tension': Idiosyncratic Idioms of Surrealism Created by Aleksander Krzywobłocki and Margit Reich-Sielska in the 1930s in Lviv.

Published in:

Arts (2076-0752), 2024, v. 13, n. 5, p. 145, doi. 10.3390/arts13050145

By:

Kossowska, Irena

Publication type:

Article

Porcine Functional Spine Unit in orthopedic research, a systematic scoping review of the methodology.

Published in:

Journal of Experimental Orthopaedics, 2022, v. 9, n. 1, p. 1, doi. 10.1186/s40634-022-00488-6

By:

Hedlund, Jacob;
Ekström, Lars;
Thoreson, Olof

Publication type:

Article

Correction: Porcine Functional Spine Unit in orthopedic research, a systematic scoping review of the methodology.

Published in:

2022

By:

Hedlund, Jacob;
Ekström, Lars;
Thoreson, Olof

Publication type:

Correction Notice

Porcine Functional Spine Unit in orthopedic research, a systematic scoping review of the methodology.

Published in:

Journal of Experimental Orthopaedics, 2022, v. 9, n. 1, p. 1, doi. 10.1186/s40634-022-00488-6

By:

Hedlund, Jacob;
Ekström, Lars;
Thoreson, Olof

Publication type:

Article

Interaction of material- and structural elasticity – an approach towards a physiological compliance in small-caliber vascular grafts.

Published in:

Journal of Industrial Textiles, 2024, p. 1, doi. 10.1177/15280837241235565

By:

Loewen, Alexander;
Gesché, Valentine;
Kossel, Klas;
Paar, Georg;
Andre, Dominic;
Jockenhoevel, Stefan

Publication type:

Article

Compressive properties investigation of "stress transformer" based on high-distance woven spacer fabric design.

Published in:

Journal of Industrial Textiles, 2023, p. 1, doi. 10.1177/15280837231164785

By:

Zhao, Ying;
Jiang, Yaming;
You, Jianrong;
Liu, Yuanjun;
Dong, Zhaoyong;
Li, Wenchao;
Dai, Wei

Publication type:

Article

Compressive properties investigation of "stress transformer" based on high-distance woven spacer fabric design.

Published in:

Journal of Industrial Textiles, 2023, v. 53, p. 1, doi. 10.1177/15280837231164785

By:

Ying Zhao;
Yaming Jiang;
Jianrong You;
Yuanjun Liu;
Zhaoyong Dong;
Wenchao Li;
Wei Dai

Publication type:

Article

Behavior of woven fabric composite under tensile loads in different directions using acoustic emission.

Published in:

Journal of Industrial Textiles, 2022, v. 52, p. 1, doi. 10.1177/15280837221117611

By:

Dehnad, Milad;
Dolatabadi, Mehdi Kamali;
Najafabadi, Mehdi Ahmadi;
Asgharian Jeddi, Ali Asghar

Publication type:

Article

Numerical modeling on off-axial fatigue behavior and failure characterization of 3D braided composites.

Published in:

Journal of Industrial Textiles, 2022, v. 52, p. 1, doi. 10.1177/15280837221119410

By:

Li, Ang;
Zhang, Chao

Publication type:

Article

Behavior of woven fabric composite under tensile loads in different directions using acoustic emission.

Published in:

Journal of Industrial Textiles, 2022, v. 52, p. 1, doi. 10.1177/15280837221117611

By:

Dehnad, Milad;
Dolatabadi, Mehdi Kamali;
Najafabadi, Mehdi Ahmadi;
Asgharian Jeddi, Ali Asghar

Publication type:

Article

Selected Aspects Of Modelling Of Non-Linear Behaviour Of Concrete During Tensile Test Using Multiplas Library.

Published in:

Transactions of the VSB - Technical University of Ostrava, Civil Engineering Series, 2015, v. 15, n. 2, p. 1, doi. 10.1515/tvsb-2015-0009

By:

Hokeš, Filip

Publication type:

Article

Effects Of Specimen Size And Crack Depth Ratio On Calibration Curves For Modified Compact Tension Specimens.

Published in:

Transactions of the VSB - Technical University of Ostrava, Civil Engineering Series, 2015, v. 15, n. 2, p. 1, doi. 10.1515/tvsb-2015-0023

By:

Seitl, Stanislav;
Viszlay, Viliam;
Cifuentes, Hector;
Canteli, Alfonso

Publication type:

Article

Numerical and Experimental Identification of Seven-Wire Strand Tensions Using Scale Energy Entropy Spectra of Ultrasonic Guided Waves.

Published in:

Shock & Vibration, 2018, p. 1, doi. 10.1155/2018/6905073

By:

Qian, Ji;
Chen, Xin;
Sun, Limin;
Yao, Guowen;
Wang, Xu

Publication type:

Article

Research and Analysis of Quasi-Zero-Stiffness Isolator with Geometric Nonlinear Damping.

Published in:

Shock & Vibration, 2017, p. 1, doi. 10.1155/2017/6719054

By:

Meng, Qingguo;
Yang, Xuefeng;
Li, Wei;
Lu, En;
Sheng, Lianchao

Publication type:

Article