Works matching DE "PLASTIC analysis (Engineering)"

Results: 487

Quantifying Seismic Earth Pressure on Retaining Walls with Relief Shelves Using the Slip-Line Method.

Published in:

Geotechnical & Geological Engineering, 2024, v. 42, n. 8, p. 7847, doi. 10.1007/s10706-024-02955-6

By:

Que, Yun;
Zhang, Jisong;
Xie, Zhe;
Lin, Yiqian;
Jiang, Zhenliang

Publication type:

Article

Investigation of the Height of Fractured Water-Conducting Zone: A Case Study.

Published in:

Geotechnical & Geological Engineering, 2021, v. 39, n. 4, p. 3019, doi. 10.1007/s10706-020-01675-x

By:

Ren, Shihu;
Cui, Feng;
Zhao, Shizhong;
Cao, Jianshe;
Bai, Jing;
Jiang, Zhengxuan;
Li, Yingchun

Publication type:

Article

Microscopic Experimental Analysis of the Accumulated Plastic Strain on a Silty Soil Around a Tunnel Under a Subway Loading.

Published in:

Geotechnical & Geological Engineering, 2020, v. 38, n. 4, p. 3435, doi. 10.1007/s10706-020-01224-6

By:

Yan, Chunling;
Zhang, Ling;
Tang, Yiqun

Publication type:

Article

Limit Analysis of Unsaturated Soil Slope Stability Considering Intermediate Principal Stress and Strength Nonlinearity.

Published in:

Geotechnical & Geological Engineering, 2017, v. 35, n. 5, p. 2053, doi. 10.1007/s10706-017-0226-8

By:

Yao, Cong;
Yang, Xiaoli

Publication type:

Article

Limit Analysis of Roof Falling in Roadway with Water-Rich Surrounding Rock.

Published in:

Geotechnical & Geological Engineering, 2017, v. 35, n. 5, p. 2361, doi. 10.1007/s10706-017-0251-7

By:

Jiang, Bei;
Wang, Qi;
Gao, Li;
Li, Shucai;
Zhang, Chong;
Gao, Hongke;
Pan, Rui

Publication type:

Article

Horizontal Pullout Resistance for a Group of Two Vertical Plate Anchors in Clays.

Published in:

Geotechnical & Geological Engineering, 2012, v. 30, n. 5, p. 1279, doi. 10.1007/s10706-012-9537-y

By:

Sahoo, Jagdish;
Kumar, Jyant

Publication type:

Article

Horizontal Pullout Capacity of a Group of Two Vertical Strip Anchors Plates Embedded in Sand.

Published in:

Geotechnical & Geological Engineering, 2012, v. 30, n. 2, p. 513, doi. 10.1007/s10706-011-9484-z

By:

Bhattacharya, Paramita;
Kumar, Jyant

Publication type:

Article

Ultimate Bearing Capacity of a Footing Considering the Interference of an Existing Footing on Sand.

Published in:

Geotechnical & Geological Engineering, 2010, v. 28, n. 4, p. 457, doi. 10.1007/s10706-010-9305-9

By:

Kouzer, K. M.;
Kumar, Jyant

Publication type:

Article

Plastic limit analysis and optimum design of structures for uncertain conditions.

Published in:

PAMM: Proceedings in Applied Mathematics & Mechanics, 2016, v. 16, n. 1, p. 705, doi. 10.1002/pamm.201610341

By:

Movahedi Rad, Majid

Publication type:

Article

A plastic correction algorithm for full-field elasto-plastic finite element simulations: critical assessment of predictive capabilities and improvement by machine learning.

Published in:

Computational Mechanics, 2025, v. 75, n. 4, p. 1263, doi. 10.1007/s00466-024-02561-6

By:

Palchoudhary, Abhishek;
Peter, Simone;
Maurel, Vincent;
Ovalle, Cristian;
Kerfriden, Pierre

Publication type:

Article

A basis reduction method using proper orthogonal decomposition for shakedown analysis of kinematic hardening material.

Published in:

Computational Mechanics, 2019, v. 64, n. 1, p. 1, doi. 10.1007/s00466-018-1653-y

By:

Ri, Jun-Hyok;
Hong, Hyon-Sik

Publication type:

Article

Strength characteristics of Mg–Li alloys.

Published in:

Strength of Materials, 2009, v. 41, n. 3, p. 294, doi. 10.1007/s11223-009-9127-2

By:

Regenera, D.;
Tkachenko, V.

Publication type:

Article

Experimental analytical method for determining characteristics of a material based on the elastic-plastic analysis of experimental data.

Published in:

Journal of Mining Science, 2007, v. 43, n. 1, p. 24, doi. 10.1007/s10913-007-0004-8

By:

Vede, I.;
Shvab, A.

Publication type:

Article

Reliability analysis for elastoplastic mechanical structures under stochastic uncertainty.

Published in:

ZAMM -- Journal of Applied Mathematics & Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 2006, v. 86, n. 5, p. 358, doi. 10.1002/zamm.200410246

By:

Marti, K.;
Kaymaz, I.

Publication type:

Article

Elastic-plastic analysis of annular disks with nonlinear strain-hardening under external pressure.

Published in:

ZAMM -- Journal of Applied Mathematics & Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 2005, v. 85, n. 3, p. 202, doi. 10.1002/zamm.200310178

By:

You, X. Y.;
You, L. H.;
Zhang, J. J.

Publication type:

Article

Predicting Railway Slope Failure Under Heavy Rainfall Using the Soil Moisture Extended Cohesive Damage Element Method.

Published in:

GeoHazards, 2025, v. 6, n. 1, p. 14, doi. 10.3390/geohazards6010014

By:

Loku-Pathirage, Sudath;
Chen, Jiye;
Fu, Min

Publication type:

Article

Effect of Changing Sand Content on Liquid Limit and Plasticity Index of Clay.

Published in:

Geotechnics, 2025, v. 5, n. 1, p. 4, doi. 10.3390/geotechnics5010004

By:

Qusai, AlHonati;
Szendefy, János;
Vásárhelyi, Balázs

Publication type:

Article

Investigating the Pattern of Plastic Hinge Formation in Steel Moment Frames Under Near-field and Farfield Earthquakes.

Published in:

Journal of Civil Engineering & Materials Application, 2024, v. 8, n. 2, p. 123, doi. 10.22034/jcema.2024.478835.1140

By:

Estakhri, Mohammad Saleh;
Nikkhoo, Ali

Publication type:

Article

A Review of Seven Tunnel Face Stability Models.

Published in:

CivilEng, 2022, v. 3, n. 1, p. 116, doi. 10.3390/civileng3010008

By:

Qarmout, Mahmoud;
König, Diethard;
Wichtmann, Torsten

Publication type:

Article

Plastic and sustainability: a bibliometric analysis using VOSviewer and CiteSpace.

Published in:

Arab Gulf Journal of Scientific Research, 2024, v. 42, n. 1, p. 44, doi. 10.1108/AGJSR-10-2022-0225

By:

Zhang, Jiale;
Quoquab, Farzana;
Mohammad, Jihad

Publication type:

Article

Energy and Exergy Analyses of Plastic Solar Air Heater Developed from Chlorinated Polyvinyl Chloride Pipes.

Published in:

Applied Solar Energy (19349424), 2023, v. 59, n. 6, p. 943, doi. 10.3103/S0003701X2360087X

By:

Reddy, Seelam Venkata Kota;
Venkateswarlu, Kavati;
Akram, Faisal;
Prasanth, Anuj;
Patrick, Aswyn;
Ahmed, Nabeel;
Panicker, Swapnesh;
Shariff, Tooba

Publication type:

Article

含左旋乳酸 - 乙二醇共聚物微球的交联透明质酸钠凝胶对兔皮下组织新生胶原水平的影响.

Published in:

Chinese Journal of Aesthetic & Plastic Surgery, 2023, v. 34, n. 9, p. 554, doi. 10.3969/j.issn.1673-7040.2023.09.012

By:

苏迪娅;
赫童;
刘晓雯;
李鑫;
王世炜;
杨威;
王洁晴

Publication type:

Article

机器学习辅助光谱分析技术在环境微／纳塑料研究中的应用.

Published in:

Chinese Journal of Inorganic Analytical Chemistry / Zhongguo Wuji Fenxi Huaxue, 2024, v. 14, n. 8, p. 1137, doi. 10.3969/j.issn.2095-1035.2024.08.013

By:

李艳;
吴欣宜;
王全龙;
巩一潮;
黎刚;
阴永光;
裴志国;
宋茂勇;
谭志强;
张庆华

Publication type:

Article

高光谱显微成像技术在微／纳米塑料分析检测中的新应用.

Published in:

Chinese Journal of Inorganic Analytical Chemistry / Zhongguo Wuji Fenxi Huaxue, 2024, v. 14, n. 8, p. 1126, doi. 10.3969/j.issn.2095-1035.2024.08.012

By:

兰如意;
李政翰;
陈志军;
张晴;
刘卓苗;
孙琦

Publication type:

Article

Finite element limit analysis: fundamentals and extensions.

Published in:

Revue Française de Géotechnique, 2023, n. 175, p. 1, doi. 10.1051/geotech/2023014

By:

Krabbenhøft, Kristian

Publication type:

Article

Effect of marine bioattachment on carbonation of sea artificial island concrete.

Published in:

Historical Biology, 2022, v. 34, n. 1, p. 42, doi. 10.1080/08912963.2021.1893714

By:

Lin, Lihong

Publication type:

Article

Compression behavior of warp-knitted spacer fabric based on simplified finite element method.

Published in:

Journal of Industrial Textiles, 2024, p. 1, doi. 10.1177/15280837241267775

By:

Song, Wenxiang;
Ma, Xiaotao;
Ma, Pibo

Publication type:

Article

Unraveling the origin of ductility in multilayered Ti/Nb composites: role of dislocation evolution.

Published in:

2024

By:

Jiang, S.;
Li, Y. T.;
He, Z. F.;
Lin Peng, R.;
Hegedüs, Z.;
Lienert, U.;
Jia, N.

Publication type:

Report

Comparative Analysis of Tunnel Plastic Zone Calculation and Engineering Measurement Based on Various Methods.

Published in:

Minerals (2075-163X), 2023, v. 13, n. 2, p. 141, doi. 10.3390/min13020141

By:

Dong, Zhihong;
Yan, Qingwen;
Guo, Qifeng;
Xi, Xun;
Lei, Xianquan;
Tan, Wenhui

Publication type:

Article

Experimental and Theoretical Study on Catenary Mechanism of Steel Frame Beam Subject to Fire.

Published in:

Fire Technology, 2023, v. 59, n. 6, p. 3493, doi. 10.1007/s10694-023-01480-x

By:

Ren, Wen

Publication type:

Article

Vývoj novej technológie zhodnocovania odpadovej PUR peny do nových výrobkov.

Published in:

Waste Forum, 2024, n. 2, p. 80

By:

ŠOOŠ, Ľubomír;
MATÚŠ, Miloš;
POKUSOVÁ, Marcela;
BÁBICS, Jozef;
ŽIARAN, Stanislav;
CHLEBO, Ondrej

Publication type:

Article

GC-MS ANALYSIS OF SOME PLASTIC COMPONENTS FROM 1997-2003 COMPUTER MAIN BOARDS.

Published in:

Studia Universitatis Babes-Bolyai, Chemia, 2021, v. 66, n. 2, p. 163, doi. 10.24193/subbchem.2021.02.14

By:

KOVACS, DALMA;
SIMEDRU, DORINA;
KOVACS, MELINDA

Publication type:

Article

Air‐Entraining Effect on Rheological Properties of Cement‐Based Mixtures.

Published in:

Advances in Materials Science & Engineering, 2024, v. 2024, p. 1, doi. 10.1155/2024/5018973

By:

Tolegenova, Aigerim;
Skripkiunas, Gintautas;
Rishko, Lyudmyla;
Akmalaiuly, Kenzhebek;
Ganachari, Sharanabasava

Publication type:

Article

Identification and Analysis of Plastic Microparticles in the Inlet and Outlet of the Wastewater Treatment Plant and Investigation of the Relationship between Different Seasons of the Year with the Amount of Production and Emission of Particles.

Published in:

Advances in Materials Science & Engineering, 2022, p. 1, doi. 10.1155/2022/8527899

By:

Darvishi, Gholamreza;
Ehteshami, Majid;
Mehrdadi, Naser;
Abedini, Reza

Publication type:

Article

Static and Seismic Stability Charts for Three-Dimensional Cut Slopes and Natural Slopes under Short-Term Undrained Conditions.

Published in:

Advances in Civil Engineering, 2019, p. 1, doi. 10.1155/2019/1914674

By:

Zhou, Yuan;
Zhang, Fei;
Li, Bing

Publication type:

Article

Plastic stress intensity factor behavior at small and large scale yielding.

Published in:

Fracture & Structural Integrity, 2020, n. 53, p. 223, doi. 10.3221/IGF-ESIS.53.19

By:

Zakharov, Alexander;
Shlyannikov, Valery;
Tartygasheva, Anastasia

Publication type:

Article

Probabilistic geotechnical engineering analysis based on first order reliability method.

Published in:

Fracture & Structural Integrity, 2019, n. 50, p. 354, doi. 10.3221/IGF-ESIS.50.30

By:

Belokas, Georgios

Publication type:

Article

An original method of direct calculation for the identification of the last hinge and the definition of the deformative state at collapse.

Published in:

Fracture & Structural Integrity, 2017, v. 11, p. 350, doi. 10.3221/IGF-ESIS.41.46

By:

De Salvo, Roberto Maria

Publication type:

Article

Limit analysis on FRP-strengthened RC members.

Published in:

Fracture & Structural Integrity, 2014, v. 8, p. 209, doi. 10.3221/IGF-ESIS.29.18

By:

De Domenico, D.;
Pisano, A. A.;
Fuschi, P.

Publication type:

Article

Understanding the sources, fate and effects of microplastics in aquatic environments with a focus on risk profiling in aquaculture systems.

Published in:

Reviews in Aquaculture, 2024, v. 16, n. 4, p. 1947, doi. 10.1111/raq.12941

By:

Nabi, Naveed;
Ahmad, Ishtiyaq;
Amin, Adnan;
Rather, Mohd Ashraf;
Ahmed, Imtiaz;
Hajam, Younis Ahmad;
Khursheed, Saba;
Malik, Monisa Mehboob;
Abubakr, Adnan

Publication type:

Article

Limit analysis approach for passive earth pressure determination in three-dimensional conditions.

Published in:

International Journal of Geotechnical Engineering, 2010, v. 4, n. 3, p. 319, doi. 10.3328/IJGE.2010.04.03.319-324

By:

Vrecl-Kojc, Helena;
Škrabl, Stanislav

Publication type:

Article

Seismic bearing capacity of shallow foundations near slopes using the upper-bound method.

Published in:

International Journal of Geotechnical Engineering, 2010, v. 4, n. 2, p. 255, doi. 10.3328/IJGE.2010.04.02.255-267

By:

Yamamoto, Kentaro

Publication type:

Article

Vertical uplift resistance of a group of two strip anchors in sand from model tests.

Published in:

International Journal of Geotechnical Engineering, 2010, v. 4, n. 2, p. 269, doi. 10.3328/IJGE.2010.04.02.269-277

By:

Kumar, Jyant;
Bhoi, Manas Kumar

Publication type:

Article

Limit analysis of transverse seismic capacity of multi-span masonry arch bridges.

Published in:

Bulletin of Earthquake Engineering, 2015, v. 13, n. 5, p. 1557, doi. 10.1007/s10518-014-9664-3

By:

Zampieri, Paolo;
Tecchio, Giovanni;
Porto, Francesca;
Modena, Claudio

Publication type:

Article

Capacity of Shear Walls by Simple Equilibrium Models.

Published in:

International Journal of Architectural Heritage: Conservation, Analysis & Restoration, 2011, v. 5, n. 4/5, p. 412, doi. 10.1080/15583058.2010.501481

By:

Roca, Pere;
Viviescas, Alvaro;
Lobato, Miguel;
Diaz, Cesar;
Serra, Isabel

Publication type:

Article

Effect of spatial variability on the slope stability using Random Field Numerical Limit Analyses.

Published in:

Georisk: Assessment & Management of Risk for Engineered Systems & Geohazards, 2016, v. 10, n. 1, p. 42, doi. 10.1080/17499518.2015.1077973

By:

Kasama, Kiyonobu;
Whittle, Andrew J.

Publication type:

Article

Buried footings in random soils: comparison of limit analysis and finite element analysis.

Published in:

Georisk: Assessment & Management of Risk for Engineered Systems & Geohazards, 2016, v. 10, n. 1, p. 55, doi. 10.1080/17499518.2015.1064141

By:

Li, J.H.;
Cassidy, M.J.;
Tian, Y.;
Huang, J.;
Lyamin, A.V.;
Uzielli, M.

Publication type:

Article

Prediction of stress fields in accretionary wedges by optimization.

Published in:

Trabajos de Geologia, 2010, v. 30, p. 246

By:

Souloumiac, P.;
Modaressi-Farahmand-Razavi, A.;
Leroy, Y. M.

Publication type:

Article

A shift approach for the dynamic response of rigid-plastic systems.

Published in:

Earthquake Engineering & Structural Dynamics, 2011, v. 40, n. 8, p. 847, doi. 10.1002/eqe.1063

By:

Voyagaki, Elia;
Mylonakis, George;
Psycharis, Ioannis N.

Publication type:

Article

Mechanical characterization of chitosan-based films using the bulge test.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 11, p. 5267, doi. 10.1007/s00170-024-14751-w

By:

Orkhis, Sara;
Essoussi, Hamza;
Bougueraa, Fatima Zahra;
Ettaqi, Said

Publication type:

Article