Works matching DE "MARTENSITIC structure"
Results: 301
Phase transformation and mechanical behaviour of thermo-mechanically controlled processed high-strength multiphase steel.
- Published in:
- Journal of Materials Science, 2016, v. 51, n. 14, p. 6569, doi. 10.1007/s10853-016-9852-4
- By:
- Publication type:
- Article
Martensitic microstructures and mechanical properties of as-quenched metastable β-type Ti-Mo alloys.
- Published in:
- Journal of Materials Science, 2016, v. 51, n. 14, p. 6886, doi. 10.1007/s10853-016-9976-6
- By:
- Publication type:
- Article
Using dilatometry to study martensitic stabilization and recrystallization kinetics in a severely deformed NiTi alloy.
- Published in:
- Journal of Materials Science, 2015, v. 50, n. 11, p. 4003, doi. 10.1007/s10853-015-8957-5
- By:
- Publication type:
- Article
Evolution of a martensitic structure in a Cu-Al alloy during processing by high-pressure torsion.
- Published in:
- Journal of Materials Science, 2013, v. 48, n. 13, p. 4613, doi. 10.1007/s10853-013-7153-8
- By:
- Publication type:
- Article
Nucleation barriers for the cubic‐to‐tetragonal phase transformation in the absence of self‐accommodation.
- Published in:
- ZAMM -- Journal of Applied Mathematics & Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 2019, v. 99, n. 2, p. N.PAG, doi. 10.1002/zamm.201800179
- By:
- Publication type:
- Article
Microstructure and properties of high power-SLM 24CrNiMoY alloy steel at different laser energy density and tempering temperature.
- Published in:
- Powder Metallurgy, 2021, v. 64, n. 1, p. 23, doi. 10.1080/00325899.2020.1850034
- By:
- Publication type:
- Article
Service Behavior of Nitride Layers of Steels for Military Applications.
- Published in:
- Coatings (2079-6412), 2020, v. 10, n. 10, p. 975, doi. 10.3390/coatings10100975
- By:
- Publication type:
- Article
A Microstructural Study of Cu-10Al-7Ag Shape Memory Alloy in As-Cast and Quenched Conditions.
- Published in:
- Symmetry (20738994), 2024, v. 16, n. 5, p. 545, doi. 10.3390/sym16050545
- By:
- Publication type:
- Article
A Review on Hot Stamping of Advanced High-Strength Steels: Technological-Metallurgical Aspects and Numerical Simulation.
- Published in:
- Symmetry (20738994), 2022, v. 14, n. 5, p. 969, doi. 10.3390/sym14050969
- By:
- Publication type:
- Article
New criterion for in situ, quick discrimination between traditionally maintained and artificially restored Japanese swords (katanas) by XRF spectroscopy.
- Published in:
- XRS: X-ray Spectrometry, 2013, v. 42, n. 6, p. 537, doi. 10.1002/xrs.2516
- By:
- Publication type:
- Article
Laser additive manufacturing of steels.
- Published in:
- International Materials Reviews, 2022, v. 67, n. 5, p. 487, doi. 10.1080/09506608.2021.1983351
- By:
- Publication type:
- Article
Small strain multiphase-field model accounting for configurational forces and mechanical jump conditions.
- Published in:
- Computational Mechanics, 2018, v. 61, n. 3, p. 277, doi. 10.1007/s00466-017-1458-4
- By:
- Publication type:
- Article
Features of the Breakdown of Oil Processing Equipment Pipe Element Austenitic Welded Joints.
- Published in:
- Chemical & Petroleum Engineering, 2021, v. 57, n. 5/6, p. 499, doi. 10.1007/s10556-021-00965-2
- By:
- Publication type:
- Article
Terahertz-induced martensitic transformation in partially stabilized zirconia.
- Published in:
- Communications Physics, 2023, v. 6, n. 1, p. 1, doi. 10.1038/s42005-023-01207-y
- By:
- Publication type:
- Article
Peculiarities of the Crystal Structure of the Martensite in Carbon Steels.
- Published in:
- Metallophysics & Advanced Technologies / Metallofizika i Novejsie Tehnologii, 2021, v. 43, n. 8, p. 1031, doi. 10.15407/mfint.43.08.1031
- By:
- Publication type:
- Article
Кристаллическая структура мартенсита углеродистых сталей.
- Published in:
- Metallophysics & Advanced Technologies / Metallofizika i Novejsie Tehnologii, 2020, v. 42, n. 1, p. 123, doi. 10.15407/mfint.42.01.0123
- By:
- Publication type:
- Article
Массоперенос и диффузионное распределение элементов при неравновесной аустенитизации стали 20Х13
- Published in:
- Metallophysics & Advanced Technologies / Metallofizika i Novejsie Tehnologii, 2020, v. 42, n. 2, p. 159, doi. 10.15407/mfint.42.02.0159
- By:
- Publication type:
- Article
レーザ積層造形法によるアルミニウム青銅組織の強化機構.
- Published in:
- Journal of the Japan Society of Powder & Powder Metallurgy / Funtai Oyobi Fummatsu Yakin, 2024, v. 71, n. 12, p. 679, doi. 10.2497/jjspm.23-00034
- By:
- Publication type:
- Article
Investigation of total and partial magnetic moments of Mn<sub>2</sub>NiAl with pressure at a several temperatures.
- Published in:
- Phase Transitions, 2019, v. 92, n. 8, p. 699, doi. 10.1080/01411594.2019.1632846
- By:
- Publication type:
- Article
Comment on: “Structural, elastic, and thermodynamic properties under pressure of the FeC in the martensitic phase: an ab-initio study”.
- Published in:
- High Pressure Research, 2014, v. 34, n. 4, p. 500, doi. 10.1080/08957959.2014.987671
- By:
- Publication type:
- Article
Crystallographic Characteristics of Phase Transformations in the Field of Medium-Carbon Steels of a Joint Obtained by Rotational Friction Welding.
- Published in:
- Doklady Physics, 2023, v. 68, n. 7, p. 237, doi. 10.1134/S1028335823070078
- By:
- Publication type:
- Article
A phase-field study of the martensitic detwinning in NiTi shape memory alloys under tension or compression.
- Published in:
- Acta Mechanica, 2020, v. 231, n. 4, p. 1539, doi. 10.1007/s00707-020-02613-x
- By:
- Publication type:
- Article
Brief Overview on Nitinol as Biomaterial.
- Published in:
- Advances in Materials Science & Engineering, 2016, p. 1, doi. 10.1155/2016/4173138
- By:
- Publication type:
- Article
Fe‐Based Filler Material Forming Austenite‐Covered Packet Lath Martensite for Gas Tungsten Arc Welding of 9% Ni Steel.
- Published in:
- Steel Research International, 2024, v. 95, n. 2, p. 1, doi. 10.1002/srin.202300438
- By:
- Publication type:
- Article
Continuous Heating/Cooling Transformation Kinetics of a Novel CrNiMoV Steel for Large Structural Parts.
- Published in:
- Steel Research International, 2023, v. 94, n. 12, p. 1, doi. 10.1002/srin.202300226
- By:
- Publication type:
- Article
Novel Martensitic High Carbon–Nitrogen Steel Produced by Casting at Low Pressure.
- Published in:
- Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202200686
- By:
- Publication type:
- Article
Influence of Partial Replacement of Co with Cu on Isothermal Transformation Kinetics in Ferritic/Martensitic Heat‐Resistant Steel.
- Published in:
- Steel Research International, 2023, v. 94, n. 2, p. 1, doi. 10.1002/srin.202200228
- By:
- Publication type:
- Article
Study on Mechanical Properties and Microstructure of the Ultrastrong Low Alloy Wear‐Resistant Steel.
- Published in:
- Steel Research International, 2021, v. 92, n. 1, p. 1, doi. 10.1002/srin.202000155
- By:
- Publication type:
- Article
The Influence of Holding Time on the Microstructure and Mechanical Properties of a 58CrMnSiNiMo Wear‐Resistant Cast Steel during Diffusion Annealing.
- Published in:
- Steel Research International, 2019, v. 90, n. 9, p. N.PAG, doi. 10.1002/srin.201900130
- By:
- Publication type:
- Article
Influence of V and Nb Micro‐Alloying on Direct Quenched and Tempered Ultra‐High Strength Steels.
- Published in:
- Steel Research International, 2019, v. 90, n. 6, p. N.PAG, doi. 10.1002/srin.201800640
- By:
- Publication type:
- Article
Assessment of Martensitic Transformation Paths Based on Transformation Potential Calculations.
- Published in:
- Steel Research International, 2019, v. 90, n. 1, p. N.PAG, doi. 10.1002/srin.201800370
- By:
- Publication type:
- Article
Effect of Micro‐Alloying Elements on Microstructure and Mechanical Properties in C–Mn–Si Quenching and Partitioning (Q&P) Steels.
- Published in:
- Steel Research International, 2019, v. 90, n. 1, p. N.PAG, doi. 10.1002/srin.201800257
- By:
- Publication type:
- Article
Study of Structural Inheritance of Austenite in Nb‐Microalloyed 18CrNiMo7–6 Steel.
- Published in:
- Steel Research International, 2018, v. 89, n. 8, p. 1, doi. 10.1002/srin.201800107
- By:
- Publication type:
- Article
1-Step 'Quenching and Partitioning' of the Press-Hardening Steel 22MnB5.
- Published in:
- Steel Research International, 2017, v. 88, n. 6, p. n/a, doi. 10.1002/srin.201600307
- By:
- Publication type:
- Article
Cyclic deformation and microstructural behaviour of reduced activation ferritic- martensitic steels.
- Published in:
- Materials Science & Technology, 2014, v. 30, n. 14, p. 1826, doi. 10.1179/1743284713Y.0000000490
- By:
- Publication type:
- Article
Control of the diffusible hydrogen content in different steel phases through the targeted use of different welding consumables in underwater wet welding.
- Published in:
- Materials & Corrosion / Werkstoffe und Korrosion, 2021, v. 72, n. 3, p. 504, doi. 10.1002/maco.202011963
- By:
- Publication type:
- Article
A novel approach for improving formation of soft zone in 22MnB5 and DP600 materials by resistance spot welding.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 5, p. 2835, doi. 10.1007/s00170-025-15015-x
- By:
- Publication type:
- Article
Deformation concentration for martensitic microstructures in the limit of low volume fraction.
- Published in:
- Calculus of Variations & Partial Differential Equations, 2017, v. 56, n. 1, p. 1, doi. 10.1007/s00526-016-1097-1
- By:
- Publication type:
- Article
Increasing wear resistance of components made of 50MnSi4 steel by Fe-Cr-C-Mo based hardfacing alloys.
- Published in:
- Metallic Materials / Kovové Materiály, 2022, v. 60, n. 6, p. 373, doi. 10.31577/km.2022.6.373
- By:
- Publication type:
- Article
Sustainable Machining: MQL Technique Combined with the Vortex Tube Cooling When Turning Martensitic Stainless Steel X20Cr13.
- Published in:
- Machines, 2023, v. 11, n. 3, p. 336, doi. 10.3390/machines11030336
- By:
- Publication type:
- Article
Effect of Welding Parameters on the Microstructure and Mechanical Properties of Friction-Welded Joints of 100Cr6 Steel.
- Published in:
- Iranian Journal of Materials Science & Engineering, 2019, v. 16, n. 3, p. 24, doi. 10.22068/ijmse.16.2.24
- By:
- Publication type:
- Article
Effect of Short Heat Treatment Routes on the Tribological Properties of Ti-6Al-4V Alloy.
- Published in:
- Iranian Journal of Materials Science & Engineering, 2017, v. 14, n. 3, p. 21, doi. 10.22068/ijmse.14.3.21
- By:
- Publication type:
- Article
Serrated Chips Formation in Micro Orthogonal Cutting of Ti6Al4V Alloys with Equiaxial and Martensitic Microstructures.
- Published in:
- Micromachines, 2019, v. 10, n. 3, p. 197, doi. 10.3390/mi10030197
- By:
- Publication type:
- Article
Functional Surface Layer Strengthening and Wear Resistance Increasing of a Low Carbon Steel by Electrolytic-Plasma Processing.
- Published in:
- Journal of Mechanical Engineering / Strojniški Vestnik, 2022, v. 68, n. 9, p. 542, doi. 10.5545/sv-jme.2022.147
- By:
- Publication type:
- Article
Laser Surface Cladding of High C-Cr Bearing Tool Steel with TiC Powders.
- Published in:
- IUP Journal of Mechanical Engineering, 2014, v. 7, n. 4, p. 67
- By:
- Publication type:
- Article
Systematic oxidation studies of dissimilar ferritic/austenitic welded joints.
- Published in:
- Materials at High Temperatures, 2021, v. 38, n. 4, p. 275, doi. 10.1080/09603409.2021.1927415
- By:
- Publication type:
- Article
An enhancement in mechanical properties of grade 91 steel on microalloying with boron and nitrogen.
- Published in:
- Materials at High Temperatures, 2021, v. 38, n. 1, p. 7, doi. 10.1080/09603409.2020.1836743
- By:
- Publication type:
- Article
Applicability of improved Dyson-McLean approach to creep deformation behaviour of tempered martensitic P9 steel.
- Published in:
- Materials at High Temperatures, 2018, v. 35, n. 4, p. 387, doi. 10.1080/09603409.2017.1361614
- By:
- Publication type:
- Article
Investigating the structural properties and wear resistance of martensitic stainless steels.
- Published in:
- PLoS ONE, 2024, v. 19, n. 11, p. 1, doi. 10.1371/journal.pone.0312242
- By:
- Publication type:
- Article
Characterization of Flame Cut Heavy Steel: Modeling of Temperature History and Residual Stress Formation.
- Published in:
- Metallurgical & Materials Transactions. Part B, 2017, v. 48, n. 6, p. 2891, doi. 10.1007/s11663-017-1090-x
- By:
- Publication type:
- Article