Works matching IS 16113683 AND DT 2024 AND VI 95 AND IP 6

Results: 38

Contents: steel research int. 6/2024.

Published in:: Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202470063
Publication type:: Article

Masthead.

Published in:: Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202470062
Publication type:: Article

Cover Picture.

Published in:: Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202470061
Publication type:: Article

Control of Steel Composition and Evolution of Inclusions During Electroslag Remelting of NiCrMoV High‐Strength Steel.

Published in:

Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202400110

By:

Ling, Haitao;
Xu, Rui;
Chang, Lizhong;
Cong, Junqiang

Publication type:

Article

Fatigue Properties at Elevated Temperatures of Secondary Tempered Nanostructured Bainite: A Study of Deformation Mechanisms.

Published in:

Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202400105

By:

Kuntz, Matthias;
Wicks, Garry;
Sourmail, Thomas;
Garcia‐Mateo, Carlos

Publication type:

Article

Numerical Simulation of the Effect of Feeding Mode on the Reduction of Ore Powder in Hydrogen‐Based Flash Ironmaking Process.

Published in:

Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202400059

By:

Tan, Jinchi;
Guo, Lei;
Yang, Yiru;
Zuo, Haibin;
Guo, Zhancheng

Publication type:

Article

Influence of the Basicity on Phosphorus Enrichment Properties of Decarbonization Slag in Low‐Carbon Double Slag Converter Steelmaking Process with Industrial Experiments, Mineralogy, and Ion–molecule Coexistence Theory.

Published in:

Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202300853

By:

Sun, Han;
Yang, Jian;
Zhang, Runhao

Publication type:

Article

Assessment of Reactivity between Submerged Entry Nozzle (SEN) and Ultra‐low C Liquid Steel: Comparison between Oxide‐Based SEN and Oxide‐Less SEN.

Published in:

Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202400025

By:

Lee, Dong‐Jun;
Cho, Yong‐Min;
Kim, Jun Hyun;
Choi, Sangbae;
Kang, Youn‐Bae

Publication type:

Article

Hardening of Cylindrical Bars with Water Impinging Jet Quenching Technique.

Published in:

Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202300884

By:

Romanov, Pavel;
Jahedi, Arvid;
Carlestam, Anders;
Moshfegh, Bahram;
Norman, Viktor;
Peng, Ru;
Calmunger, Mattias

Publication type:

Article

Effect of Case Depth and Hardness Distribution on the Rolling Contact Fatigue Performance of G20CrNi2MoA Carburized Steel.

Published in:

Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202300875

By:

Liu, Su;
Yang, Zhiyong;
Liu, Tao;
Li, Zhiqiang;
Cong, Tao

Publication type:

Article

Design of Heterogeneous Lamella Microstructure of 316L Austenitic Stainless Steel and Effect of Aging on Its Mechanical Behavior and Corrosion Properties.

Published in:

Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202300860

By:

Liu, Chaoze;
Li, Shaohong;
Gao, Junkang;
Jia, Yunfei;
Li, Jun;
Bu, Hengyong;
Zhou, Liexing;
Qi, Huarong;
Li, Mengnie

Publication type:

Article

Microstructure, Precipitation, and Strengthening Mechanism of a High‐Strength Q1100 Heavy Steel Plate via Niobium–Boron Microalloying Technology.

Published in:

Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202300857

By:

Gao, Yifan;
Wei, Yunxuan;
Zha, Zepeng;
Huo, Dongshen;
Li, Hongliang;
Wang, Zhenqiang

Publication type:

Article

Prediction of Macrosegregation in Fe–C–Cr Alloy Casting through Coupling with Thermodynamic Phase Transformation Path.

Published in:

Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202300890

By:

Sun, Leqin;
Zhang, Hongwei;
Feng, Miaomiao;
Miao, Miao;
Liu, Xiaoming;
Xu, Guangjun;
Wang, Qiang

Publication type:

Article

Acicular Ferrite Identification in Heat‐Affected Zone of a Ti‐Killed High Strength Low Alloy Steel.

Published in:

Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202300852

By:

Zhao, Haitao;
Gao, Junheng;
Huang, Yuhe;
Gao, Qing;
Zhou, Wenhao;
Zhang, Qingxue;
Xiong, Xiangjiang;
Wang, Hongtao;
Wang, Shuize

Publication type:

Article

Interphase Precipitation in Cold‐Rolled Dual‐Phase Steel Strip: Design and Challenges.

Published in:

Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202300828

By:

Lu, Shao‐Lun;
Hsu, Ya‐Lan;
Chen, Yi‐Sheng;
Yang, Kuo‐Cheng;
Yen, Hung‐Wei

Publication type:

Article

Influence of Cell Structure on Yield Strength and Strain‐Hardening Behavior in Additively Manufactured H13 Hot Work Tool Steel.

Published in:

Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202300818

By:

Kim, Sung‐Ho;
Cho, Yeonggeun;
Kim, Sung‐Joon

Publication type:

Article

Effect of Ce on Inclusions and Precipitates in 10Cr5MoV Steel and the Microscopic Behavior of Solid Solution Ce in Steel.

Published in:

Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202300814

By:

Shi, Xiaoxia;
Ren, Huiping;
Li, Xiao;
Liu, Xiangjun;
Zhan, Fei;
Yang, Changqiao

Publication type:

Article

Abnormal Strain Rate‐Dependent Work‐Hardening Behavior in Quenching and Partitioning Steel.

Published in:

Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202300813

By:

Bisch, Max‐Maria;
Fang, Xiangfan

Publication type:

Article

The Formability and Mechanical Properties of 316L Stainless Steel Fabricated by Pulsed Arc Swing Additive Manufacturing.

Published in:

Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202300804

By:

Meng, Wei;
Pan, Qinyue;
Ye, Kai;
Chen, Kai;
Hu, Jiahao;
Yin, Xiaohui

Publication type:

Article

Effects of Submerged Entry Nozzle Bottom Shape on the Size Distribution of Argon Bubbles in a Steel Continuous Casting Slab Strand Using Multiple‐Size‐Group Approach.

Published in:

Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202300790

By:

Zhou, Haichen;
Ji, Chenxi;
He, Wenyuan;
Li, Haibo;
Zhao, Changliang;
Li, Huan;
Zhang, Congcong;
Jia, Liubing

Publication type:

Article

Effect of Spheroidizing Annealing Process on Microstructure and Properties of Quenching and Tempering 60Cr16MoMA Martensitic Stainless Steel.

Published in:

Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202300781

By:

Teng, Huan;
Qian, Shasha;
Xie, Jiahao;
Zhao, Hongshan;
Wei, Xicheng;
Dong, Han

Publication type:

Article

Microstructure Evolution and Mechanical Properties of Laser Welded Dissimilar/Similar Joints Between Medium‐Mn Transformation‐Induced Plasticity Steel and DP980/22MnB5 Steels.

Published in:

Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202300780

By:

Pan, Haijun;
Yu, Wangwang;
Zhang, Shunhu;
Zhou, Wenhao;
Sun, Ze;
Zhang, Jun;
Wu, Zhiqiang

Publication type:

Article

Thermal Mechanical Behavior and Microstructure Characteristics of As‐Cast FeCrNiAl Steel.

Published in:

Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202300777

By:

Cui, Haotian;
Wang, Kui;
Lv, Jingyan;
Tian, Qingchao

Publication type:

Article

Effect of Al Content on Inclusions in Fe‐15Mn‐xAl‐C Low‐Density Steel.

Published in:

Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202300767

By:

Cao, Lei;
Wang, Guocheng;
Xiao, Yuanyou;
Tao, Ke

Publication type:

Article

Enhancing Mechanical Properties of Carbon–Silicon Steel through Two‐Stage Quenching and Partitioning with Bainitic Transformation: Ultimate Tensile Strength of 1875 MPa and Total Elongation of 8.03%.

Published in:

Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202300751

By:

Masoumi, Mohammad;
Centeno, Dany;
Tressia, Gustavo;
Loureiro, Rodrigo C. P.;
Carvalho, Felipe M.;
Marquez‐Rossy, Andres;
Poplawsky, Jonathan D.;
Ariza‐Echeverri, Edwan Anderson

Publication type:

Article

Tailoring Low‐Alloyed Cryogenic Steel Strong and Tough Introduces Fine‐Grained Equiaxed Ferrite by Intercritical Subquenching.

Published in:

Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202300749

By:

Ding, Chao;
Wang, Enmao;
Liu, Jinxu;
Li, Leilei;
Huang, ManLi;
Niu, Gang;
Yu, Xinpan;
Wu, Huibin

Publication type:

Article

Wettability Characteristics of Nanoporous Carbon Bricks Incorporated with Al2O3 Phase and Molten Iron in Sustainable and Low‐Carbon Blast Furnace.

Published in:

Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202300733

By:

Liu, Yanxiang;
Guo, Ziyu;
Wang, Cui;
Zhang, Jianliang;
Zong, Yanbing;
Jiao, Kexin

Publication type:

Article

Prevention of Thermal Crack in Steel Slab Using Neural Networks Model to Predict Impact Absorption Energy.

Published in:

Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202300732

By:

Cho, Kyungchul;
Kim, Gibeom;
Kwon, Sang‐Hum;
Yim, Chang‐Hee;
Hong, Dae‐Geun

Publication type:

Article

Numerical Study on Characteristic Positions and Transition of Flow Patterns in a Slab Continuous Casting Mold.

Published in:

Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202300714

By:

Rong, Wenjie;
Qiu, Liang;
Liu, Zhongqiu;
Li, Baokuan;
Liu, Chengjun

Publication type:

Article

Effect of Dew Point on the Selective Oxidation and Reactive Wetting of DP980 Steel during Hot‐Dip Galvanizing.

Published in:

Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202300678

By:

Ni, Lingling;
Lu, Jun;
Wang, Shuize;
Chen, Jiangfeng;
Han, En‐Hou;
Mao, Xinping

Publication type:

Article

Effect of Calcium Content on Characteristics of Inclusions in an Al‐Killed Steel.

Published in:

Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202300667

By:

Wang, Weijian;
Zhang, Lifeng

Publication type:

Article

Effect of Different Quenching Methods on the Microstructure and Mechanical Properties of 30MnB5NbTi.

Published in:

Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202300629

By:

Wang, Xinwei;
Song, Renbo;
Chen, Xinghan;
Huo, Weifeng;
Zhao, Shuai;
Zhang, Yingchao

Publication type:

Article

Comparison of Softening Behavior and Abrasive Wear Resistance between Conventionally and Additively Manufactured Tool Steels.

Published in:

Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202300577

By:

Yuan, Miwen;
Nyborg, Lars;
Oikonomou, Christos;
Fan, Yicheng;
Liu, Libin;
Ye, Jason Weijiang;
Cao, Yu

Publication type:

Article

A Hot‐Stamped Medium‐Mn Steel with Superior Strength–Ductility–Bendability Combination and Thin Oxidation Layer.

Published in:

Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202300553

By:

Wang, Hesong;
Yan, Fengkai;
Chang, Zhiyuan

Publication type:

Article

Metallurgical Properties of Vacuum Extrusion Iron‐Rich Dust Briquette and Its Effects on Blast Furnace Soft Melting Zone.

Published in:

Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202300545

By:

Xu, Runsheng;
Zhang, Yuchen;
Yu, Jiyong;
Zhang, Jianliang;
Aleksey, Ternovyh;
Zhang, Siqi;
Cao, Minghui

Publication type:

Article

Study on the Cleanliness of SWRS82B Hard Wire Steel Refined by Fluorine‐Free Slag with Medium and High Basicity.

Published in:

Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202300532

By:

Zhao, Yudong;
Deng, Siqi;
Wang, Linzhu;
Xia, Chaokai;
Li, Shen

Publication type:

Article

Influence of Quenching and Tempering on the Tribological and Corrosion Behavior of Plasma‐Nitrided Society of Automotive Engineers 52100.

Published in:

Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202300512

By:

Souza dos Reis Junior, Jenario;
Cristino de Sousa Brito, Marcos;
Abreu de Oliveira, Patrik;
Santana Libório, Maxwell;
Matos Monção, Renan;
Sousa Nunes, Maelson;
Augusto Antônio Júnior, César;
Sgarbi Rossino, Luciana;
Henrique de Carvalho Costa, Thércio;
Ciqueira Feitor, Michelle;
Ribeiro Magalhães de Sousa, Rômulo

Publication type:

Article

Development of TiO2/Nb2O5 Films and Evaluation of Corrosion Prevention in AISI 304.

Published in:

Steel Research International, 2024, v. 95, n. 6, p. 1, doi. 10.1002/srin.202300423

By:

Santos, Brenda Ghiane Pena;
Machado, Anelise Andrade;
Dias, Mércia Silva;
Silva, Tiago Almeida;
Neto, Almir da Silva;
Denadai, Ângelo;
Oliveira, Fernando Castro de

Publication type:

Article

Works matching IS 16113683 AND DT 2024 AND VI 95 AND IP 6

Contents: steel research int. 6/2024.

Masthead.

Cover Picture.

Control of Steel Composition and Evolution of Inclusions During Electroslag Remelting of NiCrMoV High‐Strength Steel.

Fatigue Properties at Elevated Temperatures of Secondary Tempered Nanostructured Bainite: A Study of Deformation Mechanisms.

Numerical Simulation of the Effect of Feeding Mode on the Reduction of Ore Powder in Hydrogen‐Based Flash Ironmaking Process.

Influence of the Basicity on Phosphorus Enrichment Properties of Decarbonization Slag in Low‐Carbon Double Slag Converter Steelmaking Process with Industrial Experiments, Mineralogy, and Ion–molecule Coexistence Theory.

Assessment of Reactivity between Submerged Entry Nozzle (SEN) and Ultra‐low C Liquid Steel: Comparison between Oxide‐Based SEN and Oxide‐Less SEN.

Hardening of Cylindrical Bars with Water Impinging Jet Quenching Technique.

Effect of Case Depth and Hardness Distribution on the Rolling Contact Fatigue Performance of G20CrNi2MoA Carburized Steel.

Design of Heterogeneous Lamella Microstructure of 316L Austenitic Stainless Steel and Effect of Aging on Its Mechanical Behavior and Corrosion Properties.

Microstructure, Precipitation, and Strengthening Mechanism of a High‐Strength Q1100 Heavy Steel Plate via Niobium–Boron Microalloying Technology.

Prediction of Macrosegregation in Fe–C–Cr Alloy Casting through Coupling with Thermodynamic Phase Transformation Path.

Acicular Ferrite Identification in Heat‐Affected Zone of a Ti‐Killed High Strength Low Alloy Steel.

Interphase Precipitation in Cold‐Rolled Dual‐Phase Steel Strip: Design and Challenges.

Influence of Cell Structure on Yield Strength and Strain‐Hardening Behavior in Additively Manufactured H13 Hot Work Tool Steel.

Effect of Ce on Inclusions and Precipitates in 10Cr5MoV Steel and the Microscopic Behavior of Solid Solution Ce in Steel.

Abnormal Strain Rate‐Dependent Work‐Hardening Behavior in Quenching and Partitioning Steel.

The Formability and Mechanical Properties of 316L Stainless Steel Fabricated by Pulsed Arc Swing Additive Manufacturing.

Effects of Submerged Entry Nozzle Bottom Shape on the Size Distribution of Argon Bubbles in a Steel Continuous Casting Slab Strand Using Multiple‐Size‐Group Approach.

Effect of Spheroidizing Annealing Process on Microstructure and Properties of Quenching and Tempering 60Cr16MoMA Martensitic Stainless Steel.

Microstructure Evolution and Mechanical Properties of Laser Welded Dissimilar/Similar Joints Between Medium‐Mn Transformation‐Induced Plasticity Steel and DP980/22MnB5 Steels.

Thermal Mechanical Behavior and Microstructure Characteristics of As‐Cast FeCrNiAl Steel.

Effect of Al Content on Inclusions in Fe‐15Mn‐xAl‐C Low‐Density Steel.

Enhancing Mechanical Properties of Carbon–Silicon Steel through Two‐Stage Quenching and Partitioning with Bainitic Transformation: Ultimate Tensile Strength of 1875 MPa and Total Elongation of 8.03%.

Tailoring Low‐Alloyed Cryogenic Steel Strong and Tough Introduces Fine‐Grained Equiaxed Ferrite by Intercritical Subquenching.

Wettability Characteristics of Nanoporous Carbon Bricks Incorporated with Al<sub>2</sub>O<sub>3</sub> Phase and Molten Iron in Sustainable and Low‐Carbon Blast Furnace.

Prevention of Thermal Crack in Steel Slab Using Neural Networks Model to Predict Impact Absorption Energy.

Numerical Study on Characteristic Positions and Transition of Flow Patterns in a Slab Continuous Casting Mold.

Effect of Dew Point on the Selective Oxidation and Reactive Wetting of DP980 Steel during Hot‐Dip Galvanizing.

Effect of Calcium Content on Characteristics of Inclusions in an Al‐Killed Steel.

Effect of Different Quenching Methods on the Microstructure and Mechanical Properties of 30MnB5NbTi.

Comparison of Softening Behavior and Abrasive Wear Resistance between Conventionally and Additively Manufactured Tool Steels.

A Hot‐Stamped Medium‐Mn Steel with Superior Strength–Ductility–Bendability Combination and Thin Oxidation Layer.

Metallurgical Properties of Vacuum Extrusion Iron‐Rich Dust Briquette and Its Effects on Blast Furnace Soft Melting Zone.

Study on the Cleanliness of SWRS82B Hard Wire Steel Refined by Fluorine‐Free Slag with Medium and High Basicity.

Influence of Quenching and Tempering on the Tribological and Corrosion Behavior of Plasma‐Nitrided Society of Automotive Engineers 52100.

Development of TiO<sub>2</sub>/Nb<sub>2</sub>O<sub>5</sub> Films and Evaluation of Corrosion Prevention in AISI 304.