Works matching IS 16113683 AND DT 2023 AND VI 94 AND IP 3

Results: 39

Evolution Mechanism of MgO–Al2O3–SiO2–CaO Inclusions During Continuous Casting of Si‐Killed Spring Steel.

Published in:

Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202200475

By:

Wang, Chen;
Tang, Wei;
Zhang, Jiang-Shan;
Chi, Yun-Guang;
Chen, Jun;
Liu, Qing

Publication type:

Article

Contents: steel research int. 3/2023.

Published in:: Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202370033
Publication type:: Article

Masthead.

Published in:: Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202370032
Publication type:: Article

Influence of Fluorine and CaO/Al2O3 Ratio on the Wetting Behavior Between CaO–Al2O3‐Based Mold Flux and Steel Substrate.

Published in:

Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202200598

By:

Yang, Yang;
Wang, Wanlin;
Zhou, Lejun;
Luo, Hao;
Zheng, Qing;
Zhao, Ru

Publication type:

Article

A Static Model for Energy‐Optimizing Furnace.

Published in:

Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202200843

By:

Vidhyasagar, Malaiyappan;
Kumar, Deepoo;
Viswanathan, Nurni Neelakantan;
Kumar, S. M.;
Manjini, Sambandam

Publication type:

Article

Evaluation of Surface Tension of CaO–SiO2–Al2O3‐Based Mold Flux Containing Ce2O3.

Published in:

Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202200715

By:

Geng, Xin;
Li, Boyang;
Jiang, Zhouhua

Publication type:

Article

The Causes and Effects of Preannealed Radiative Property Variations Across Full‐Hard Advanced High‐Strength Steel Coils.

Published in:

Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202200705

By:

Narayanan, Nishant S.;
Lin, Kaihsiang;
Suleiman, Fatima K.;
Daun, Kyle J.

Publication type:

Article

Effect of Microstructural Anisotropy on Fracture Toughness of Selective‐Laser‐Melted 15‐5 PH Stainless Steel.

Published in:

Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202200703

By:

He, Ke;
Lv, Binghua;
Niu, Xiaodong;
Mao, Zhongfa;
Zhang, Lujie;
Rao, Heng;
Cao, Sheng

Publication type:

Article

Novel Martensitic High Carbon–Nitrogen Steel Produced by Casting at Low Pressure.

Published in:

Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202200686

By:

Coha-Vesga, Pablo Miguel;
Mendoza-Oliveros, Martín Emilio;
Pérez-Villamil, Fabio Raúl;
Coury, Francisco Gil;
Mujica-Roncery, Lais

Publication type:

Article

Analysis of Transition Zone on a Hot‐Stamped Part with Tailored Tool Tempering Approach by Numerical and Physical Simulation.

Published in:

Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202200665

By:

Palmieri, Maria Emanuela;
Posa, Paolo;
Angelastro, Andrea;
Bassan, Daniele;
Colosseo, Marco;
Tricarico, Luigi

Publication type:

Article

Evaluation of Phosphorus Enrichment Capacity of CaO–SiO2–FeO–MgO–MnO–P2O5–Al2O3 Dephosphorization Slag Based on Ion‐Molecule Coexistence Theory.

Published in:

Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202200662

By:

Sun, Han;
Yang, Jian;
Yang, Wenkui;
Zhang, Runhao

Publication type:

Article

Microstructure Evolution and Mechanical Properties of Heterogeneous Nano/Ultrafine‐Grained Austenitic Stainless Steel Prepared by Low‐Temperature Rolling and Annealing.

Published in:

Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202200658

By:

Liu, Jia;
Wang, Haojie;
Huang, Long;
Ma, Xing;
Zhang, Rong;
Deng, Xiangtao;
Wang, Zhaodong

Publication type:

Article

Computationally Efficient Cellular Automata‐Based Full‐Field Models of Static Recrystallization: A Perspective Review.

Published in:

2023

By:

Madej, Lukasz;
Sitko, Mateusz

Publication type:

Literature Review

Study on Wear Resistance Performance along the Thickness Direction of In Situ TiC‐Reinforced High‐Strength Steel.

Published in:

Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202200654

By:

Ning, Bo;
Niu, Gang;
Yu, Xinpan;
Gong, Na;
Wu, Huibin

Publication type:

Article

Flow Stress Characteristics and Constitutive Modeling of Typical Ultrahigh‐Strength Steel under High Temperature and Large Strain.

Published in:

Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202200648

By:

Zhao, Mingjie;
Huang, Liang;
Li, Changmin;
Su, Yang;
Guo, Shiqi;
Li, Jianjun;
Sun, Chaoyuan;
Li, Pengchuan

Publication type:

Article

Effect of Permanent Magnet Stirring on Solidification of High‐Sulfur Micro‐Alloyed Steel under Different Magnetic Flux Densities.

Published in:

Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202200635

By:

Peng, Jianfei;
Wang, Wanlin;
Zhou, Wenhao;
Zeng, Jie

Publication type:

Article

Enhanced {100} Recrystallization Texture in Strip‐Cast Nonoriented Electrical Steel by Two‐Stage Annealing.

Published in:

Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202200633

By:

Jiao, Hai-tao;
Xie, Xin-xiang;
Hu, Yong;
Liu, De-jia;
Tang, Yan-chuan;
Zhao, Long-zhi

Publication type:

Article

Effect of Heat Treatment on Microstructure and Properties of Improved 40CrNi2Si2MoV Steel.

Published in:

Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202200627

By:

Tang, Yuanshou;
Si, Yu;
Yu, Shuoshuo;
Xu, Zhengmeng;
Cao, Pengjun;
Li, Shouhua;
Zhang, Longzhu;
Li, Kejian

Publication type:

Article

Recycling‐Induced Copper Contamination of a 42CrMo4 Quench and Tempering Steel: Alterations in Transformation Behavior and Mechanical Properties.

Published in:

Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202200623

By:

Gramlich, Alexander;
Hinrichs, Torben;
Springer, Hauke;
Krupp, Ulrich

Publication type:

Article

Development of a Periodic Laminate Structure in H13 Steel Using Laser Powder Bed Fusion: Effects of Tempering on Hardness Evolution.

Published in:

Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202200622

By:

Miyauchi, Hajime;
Matsumoto, Hiroaki;
Yokota, Kozo

Publication type:

Article

Influence of Electron Beam Welding with Multiple Beams on Stress Corrosion Properties of AF1410 Steel.

Published in:

Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202200609

By:

Fu, Pengfei;
Tang, Zhenyun;
Zhao, Tong;
Mao, Zhiyong;
Li, Lihang;
Zhang, An

Publication type:

Article

Influence of Fluorine and CaO/Al2O3 Ratio on the Wetting Behavior Between CaO–Al2O3‐Based Mold Flux and Steel Substrate.

Published in:

Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202200598

By:

Yang, Yang;
Wang, Wanlin;
Zhou, Lejun;
Luo, Hao;
Zheng, Qing;
Zhao, Ru

Publication type:

Article

Dynamic Recrystallization Behavior Under Inhomogeneous Thermomechanical Deformation State.

Published in:

Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202200574

By:

Peng, Yan;
Liang, Shicheng;
Liu, Caiyi;
Barella, Silvia;
Guo, Shuo;
Gruttadauria, Andrea;
Belfi, Marco;
Liu, Yang;
Qu, Xiaobo;
Mapelli, Carlo

Publication type:

Article

Rapid Visualization of Microstructural Evolution during Hot Strip Rolling Using Phenomenological Models and the Laguerre–Voronoi Diagram.

Published in:

Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202200572

By:

Cui, Chunyuan;
Cao, Guangming;
Liu, Jianjun;
Cao, Yang;
Zhang, Chengde;
Liu, Zhenyu

Publication type:

Article

Thermomechanical Treatment Performance and Flow Stress Model of a Fe–Mn–Al–C Low‐Density Steel.

Published in:

Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202200544

By:

Wang, Weijun;
Zhang, Bendao;
Cen, Qiongying;
Zhang, Mei;
Man, Tinghui;
Dong, Han

Publication type:

Article

Hydrogen Diffusion and Hydrogen Embrittlement Failure Behavior of AH36 Marine Steel Subjected to High Heat Input Welding.

Published in:

Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202200539

By:

Zhang, Dazheng;
Cui, Changzhi;
Li, Weijuan;
Xu, Jiakai

Publication type:

Article

Effect of Nozzle Position on Fluid Flow and Solidification in a Billet Curved Mould using Mould Electromagnetic Stirring.

Published in:

Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202200536

By:

Wang, Jian-Li;
Qiu, Guo-Xing;
Zhu, Jia-Yu;
Wang, Wei-An;
Yang, Yong-Kun;
Li, Xiao-Ming;
Liu, Cheng-Jun

Publication type:

Article

Effect of Si Content on the Microstructures and Toughness in Heat‐Affected Zone of Offshore Engineering Steels with Mg Deoxidation.

Published in:

Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202200534

By:

Pan, Xiaoqian;
Yang, Jian;
Zhang, Yinhui;
Li, Rongbin

Publication type:

Article

Distribution and Precipitation Mechanism of TiN in Industrial Pure Iron Bloom.

Published in:

Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202200481

By:

Liu, Xin;
Bao, Yanping;
Gu, Chao;
Wang, Min;
Yang, Jun;
Chen, Botao

Publication type:

Article

Effect of Microstructure on the Granule Strength of Hollow Granulated Mold Fluxes for Continuous Casting.

Published in:

Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202200480

By:

Han, Funian;
Wen, Guanghua;
Zhang, Fei;
Wang, Zhe;
Yu, Liang

Publication type:

Article

Evolution Mechanism of MgO–Al2O3–SiO2–CaO Inclusions During Continuous Casting of Si‐Killed Spring Steel.

Published in:

Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202200475

By:

Wang, Chen;
Tang, Wei;
Zhang, Jiang-Shan;
Chi, Yun-Guang;
Chen, Jun;
Liu, Qing

Publication type:

Article

Effect of Nb on Hot Deformation Behavior and Microstructure of Fe–6.5 wt% Si High‐Silicon Electrical Steel.

Published in:

Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202200463

By:

Lin, Guangtao;
Zhao, Fan;
Zhang, Zhihao;
Xie, Jianxin

Publication type:

Article

The Investigation of Phase Transition and Solute Transport for Bloom Continuous Casting with Steel Strip‐Feeding Process and Mold Electromagnetic Stirring: A Comparative Study.

Published in:

Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202200366

By:

Zhang, Li-Hao;
Guan, Rui;
Ji, Cheng;
Zhu, Miao-Yong

Publication type:

Article

Properties and Structure Evolution of CaO–Al2O3–La2O3 Slags with Various Alkali Metal Oxide Contents.

Published in:

Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202200316

By:

Fan, Lei;
Qi, Jie;
Liu, Chengjun;
Jiang, Maofa

Publication type:

Article

A Novel Continuous Cooling Treatment Based on the Carbon Diffusion Process During Nanobainite Transformation in High‐Carbon Steel.

Published in:

Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202200291

By:

Fan, Shichao;
Guo, Dong;
Deng, Xiaohu;
Wang, Han

Publication type:

Article

Numerical Investigation of the Radial Ore‐to‐Coke Ratio in the Blast Furnace Throat during Nonuniform Burden Descent.

Published in:

Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202200290

By:

Wei, Han;
Mondal, Debanga Nandan;
Saxén, Henrik;
Yu, Yaowei

Publication type:

Article

Effect of Boron Content on Microstructure and Impact Toughness in CGHAZ of Shipbuilding Steel Plates with Ca Deoxidation.

Published in:

Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202200278

By:

Liu, Dekun;
Yang, Jian;
Zhang, Yinhui

Publication type:

Article

Thermodynamics and Nucleation Kinetics Model of Nonalloyed Carbon Deoxidation of Bearing Steel.

Published in:

Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202200269

By:

Cao, Lei;
Zhu, Liguang;
Guo, Zhihong;
Qiu, Guoxing

Publication type:

Article

Mobile Induction Heat Treatment of Large‐Sized Spur Gear—The Effect of Scanning Speed and Air Gap on the Uniformity of Hardened Depth and Mechanical Properties.

Published in:

Steel Research International, 2023, v. 94, n. 3, p. 1, doi. 10.1002/srin.202200261

By:

Saputro, Imang Eko;
Chen, Chi-Peng;
Jheng, Yi-Siang;
Huang, Hung-Chieh;
Fuh, Yiin-Kuen

Publication type:

Article

Works matching IS 16113683 AND DT 2023 AND VI 94 AND IP 3

Evolution Mechanism of MgO–Al<sub>2</sub>O<sub>3</sub>–SiO<sub>2</sub>–CaO Inclusions During Continuous Casting of Si‐Killed Spring Steel.

Contents: steel research int. 3/2023.

Masthead.

Influence of Fluorine and CaO/Al<sub>2</sub>O<sub>3</sub> Ratio on the Wetting Behavior Between CaO–Al<sub>2</sub>O<sub>3</sub>‐Based Mold Flux and Steel Substrate.

A Static Model for Energy‐Optimizing Furnace.

Evaluation of Surface Tension of CaO–SiO<sub>2</sub>–Al<sub>2</sub>O<sub>3</sub>‐Based Mold Flux Containing Ce<sub>2</sub>O<sub>3</sub>.

The Causes and Effects of Preannealed Radiative Property Variations Across Full‐Hard Advanced High‐Strength Steel Coils.

Effect of Microstructural Anisotropy on Fracture Toughness of Selective‐Laser‐Melted 15‐5 PH Stainless Steel.

Novel Martensitic High Carbon–Nitrogen Steel Produced by Casting at Low Pressure.

Analysis of Transition Zone on a Hot‐Stamped Part with Tailored Tool Tempering Approach by Numerical and Physical Simulation.

Evaluation of Phosphorus Enrichment Capacity of CaO–SiO<sub>2</sub>–FeO–MgO–MnO–P<sub>2</sub>O<sub>5</sub>–Al<sub>2</sub>O<sub>3</sub> Dephosphorization Slag Based on Ion‐Molecule Coexistence Theory.

Microstructure Evolution and Mechanical Properties of Heterogeneous Nano/Ultrafine‐Grained Austenitic Stainless Steel Prepared by Low‐Temperature Rolling and Annealing.

Computationally Efficient Cellular Automata‐Based Full‐Field Models of Static Recrystallization: A Perspective Review.

Study on Wear Resistance Performance along the Thickness Direction of In Situ TiC‐Reinforced High‐Strength Steel.

Flow Stress Characteristics and Constitutive Modeling of Typical Ultrahigh‐Strength Steel under High Temperature and Large Strain.

Effect of Permanent Magnet Stirring on Solidification of High‐Sulfur Micro‐Alloyed Steel under Different Magnetic Flux Densities.

Enhanced {100} Recrystallization Texture in Strip‐Cast Nonoriented Electrical Steel by Two‐Stage Annealing.

Effect of Heat Treatment on Microstructure and Properties of Improved 40CrNi<sub>2</sub>Si<sub>2</sub>MoV Steel.

Recycling‐Induced Copper Contamination of a 42CrMo4 Quench and Tempering Steel: Alterations in Transformation Behavior and Mechanical Properties.

Development of a Periodic Laminate Structure in H13 Steel Using Laser Powder Bed Fusion: Effects of Tempering on Hardness Evolution.

Influence of Electron Beam Welding with Multiple Beams on Stress Corrosion Properties of AF1410 Steel.

Influence of Fluorine and CaO/Al<sub>2</sub>O<sub>3</sub> Ratio on the Wetting Behavior Between CaO–Al<sub>2</sub>O<sub>3</sub>‐Based Mold Flux and Steel Substrate.

Dynamic Recrystallization Behavior Under Inhomogeneous Thermomechanical Deformation State.

Rapid Visualization of Microstructural Evolution during Hot Strip Rolling Using Phenomenological Models and the Laguerre–Voronoi Diagram.

Thermomechanical Treatment Performance and Flow Stress Model of a Fe–Mn–Al–C Low‐Density Steel.

Hydrogen Diffusion and Hydrogen Embrittlement Failure Behavior of AH36 Marine Steel Subjected to High Heat Input Welding.

Effect of Nozzle Position on Fluid Flow and Solidification in a Billet Curved Mould using Mould Electromagnetic Stirring.

Effect of Si Content on the Microstructures and Toughness in Heat‐Affected Zone of Offshore Engineering Steels with Mg Deoxidation.

Distribution and Precipitation Mechanism of TiN in Industrial Pure Iron Bloom.

Effect of Microstructure on the Granule Strength of Hollow Granulated Mold Fluxes for Continuous Casting.

Evolution Mechanism of MgO–Al<sub>2</sub>O<sub>3</sub>–SiO<sub>2</sub>–CaO Inclusions During Continuous Casting of Si‐Killed Spring Steel.

Effect of Nb on Hot Deformation Behavior and Microstructure of Fe–6.5 wt% Si High‐Silicon Electrical Steel.

The Investigation of Phase Transition and Solute Transport for Bloom Continuous Casting with Steel Strip‐Feeding Process and Mold Electromagnetic Stirring: A Comparative Study.

Properties and Structure Evolution of CaO–Al<sub>2</sub>O<sub>3</sub>–La<sub>2</sub>O<sub>3</sub> Slags with Various Alkali Metal Oxide Contents.

A Novel Continuous Cooling Treatment Based on the Carbon Diffusion Process During Nanobainite Transformation in High‐Carbon Steel.

Numerical Investigation of the Radial Ore‐to‐Coke Ratio in the Blast Furnace Throat during Nonuniform Burden Descent.

Effect of Boron Content on Microstructure and Impact Toughness in CGHAZ of Shipbuilding Steel Plates with Ca Deoxidation.

Thermodynamics and Nucleation Kinetics Model of Nonalloyed Carbon Deoxidation of Bearing Steel.

Mobile Induction Heat Treatment of Large‐Sized Spur Gear—The Effect of Scanning Speed and Air Gap on the Uniformity of Hardened Depth and Mechanical Properties.