Compression Molding Flow Behavior and Void Optimization of an Integrated Circuit Package with Shielding-Metal-Frame.
- Published in:
- Polymers (20734360), 2025, v. 17, n. 10, p. 1301, doi. 10.3390/polym17101301
- By:
- Publication type:
- Article
Works matching DE "MOLDING materials"
Results: 417
1
2
Thermal Performance Analysis of Integrated Energy Management System for Mold Cooling/Heat Pump/Material Preheating of Injection-Molding Machine.
- Published in:
- Symmetry (20738994), 2025, v. 17, n. 5, p. 637, doi. 10.3390/sym17050637
- By:
- Publication type:
- Article
3
Desiccation-Induced Volumetric Shrinkage of Compacted Foundry Sand Treated with Cement Kiln Dust.
- Published in:
- Geotechnical & Geological Engineering, 2013, v. 31, n. 1, p. 163, doi. 10.1007/s10706-012-9577-3
- By:
- Publication type:
- Article
4
Computation-Experimental Evaluation of the Density and Adhesion Strength of Powder Coatings Applied by the Electrocontact Method. Part 1. Coating Compaction.
- Published in:
- Strength of Materials, 2023, v. 55, n. 4, p. 759, doi. 10.1007/s11223-023-00566-9
- By:
- Publication type:
- Article
5
Theoretical Studies of Temperature Compensation of Results of Diagnostics of Polymer Composites Using the Method of Two Optical Fibers.
- Published in:
- Russian Journal of Nondestructive Testing, 2023, v. 59, n. 10, p. 1061, doi. 10.1134/S1061830923700560
- By:
- Publication type:
- Article
6
Electrode materials based on a Ti-Al-C MAX phase.
- Published in:
- Inorganic Materials, 2016, v. 52, n. 10, p. 998, doi. 10.1134/S0020168516100174
- By:
- Publication type:
- Article
7
产阿魏酸酯酶菌株的 筛选鉴定及发酵玉米皮效果研究.
- Published in:
- Feed Research, 2023, v. 46, n. 3, p. 66, doi. 10.13557/j.cnki.issn1002-2813.2023.03.014
- By:
- Publication type:
- Article
8
Evaluation of Cytocompatibility of PEEK-Based Composites as a Function of Manufacturing Processes.
- Published in:
- Bioengineering (Basel), 2023, v. 10, n. 11, p. 1327, doi. 10.3390/bioengineering10111327
- By:
- Publication type:
- Article
9
QUERIES AND ANSWERS.
- Published in:
- Journal of Education, 1886, v. 23, n. 5, p. 71
- Publication type:
- Article
10
Grey relational optimization for factors influencing tensile, flexural, and impact properties of hybrid sisal banana fiber epoxy composites.
- Published in:
- Journal of Industrial Textiles, 2022, v. 51, p. 4441S, doi. 10.1177/1528083720928501
- By:
- Publication type:
- Article
11
التراث الغناسيقي في اوبريت مدينة البصرة.
- Published in:
- Misan Journal of Academic Studies, 2021, v. 20, n. 40, p. 81
- By:
- Publication type:
- Article
12
Dry porous polydimethylsiloxane (PDMS): a novel method using camphor as scaffold.
- Published in:
- Journal of Polymer Engineering, 2024, v. 44, n. 7, p. 490, doi. 10.1515/polyeng-2024-0097
- By:
- Publication type:
- Article
13
Study on the influence of in-mold sequential injection molding process parameters on mechanical properties of self-reinforced single composites.
- Published in:
- Journal of Polymer Engineering, 2024, v. 44, n. 2, p. 135, doi. 10.1515/polyeng-2023-0230
- By:
- Publication type:
- Article
14
Influence of low-fracture-fiber mechanism on fiber/melt-flow behavior and tensile properties of ultra-long-glass-fiber-reinforced polypropylene composites injection molding.
- Published in:
- Journal of Polymer Engineering, 2021, v. 41, n. 2, p. 155, doi. 10.1515/polyeng-2020-0120
- By:
- Publication type:
- Article
15
Oscillating shear capillary rheometry (OSCAR) for polymer melts.
- Published in:
- Journal of Polymer Engineering, 2020, v. 40, n. 9, p. 737, doi. 10.1515/polyeng-2019-0231
- By:
- Publication type:
- Article
16
Research on rhenium–iridium alloy coating on microgroove molds in precision glass molding.
- Published in:
- Applied Nanoscience, 2021, v. 11, n. 3, p. 797, doi. 10.1007/s13204-019-01097-z
- By:
- Publication type:
- Article
17
Study of plasma parameter’s distribution upon electrical wire explosion.
- Published in:
- European Physical Journal D (EPJ D), 2010, v. 54, n. 2, p. 335, doi. 10.1140/epjd/e2008-00258-0
- By:
- Publication type:
- Article
18
FABRICATING A MOLD USING CNC TECHNOLOGY FOR COMPOSITE MATERIAL TENSILE TEST SAMPLES.
- Published in:
- Academic Journal of Manufacturing Engineering, 2024, v. 22, n. 2, p. 66
- By:
- Publication type:
- Article
19
CAE ANALYSIS OF CONFORMAL COOLING APPLICATION - CASE STUDY.
- Published in:
- Annals of the Faculty of Engineering Hunedoara - International Journal of Engineering, 2012, v. 10, n. 3, p. 115
- By:
- Publication type:
- Article
20
Durability of the bond between resin composite cores and prefabricated posts.
- Published in:
- Acta Odontologica Scandinavica, 2009, v. 67, n. 5, p. 271, doi. 10.1080/00016350902938571
- By:
- Publication type:
- Article
21
Comparison of marginal accuracy of interim restoration fabricated from self-cure composite and autopolymerizing acrylic resin: An in vitro study.
- Published in:
- Journal of Pharmacy & Bioallied Sciences, 2020, v. 12, p. 361, doi. 10.4103/jpbs.JPBS_106_20
- By:
- Publication type:
- Article
22
Pistachio Shell Powder as an Additive in Molded Pulp Products.
- Published in:
- BioResources, 2025, v. 20, n. 2, p. 2508, doi. 10.15376/biores.20.2.2508-2529
- By:
- Publication type:
- Article
23
Molding of All-Cellulose Plates Made of Cellulose Pulp Extracted from Citrus Fruit Residue.
- Published in:
- BioResources, 2025, v. 20, n. 1, p. 1577, doi. 10.15376/biores.20.1.1577-1583
- By:
- Publication type:
- Article
24
Design and Simulation of Internal Planetary Wheel Plunger-Type Ring Molding Machine for Biomass Pellets.
- Published in:
- BioResources, 2024, v. 19, n. 3, p. 5599, doi. 10.15376/biores.19.3.5599-5609
- By:
- Publication type:
- Article
25
Sustainable Paper-based Packaging from Hemp Hurd Fiber: A Potential Material for Thermoformed Molded Fiber Packaging.
- Published in:
- BioResources, 2024, v. 19, n. 1, p. 1728, doi. 10.15376/biores.19.1.1728-1743
- By:
- Publication type:
- Article
26
Flow Forming of Wood Irradiated with Electron Beam -- Molding Load of Irradiated Wood and Mechanical Properties of the Molded Material.
- Published in:
- BioResources, 2021, v. 16, n. 2, p. 3895, doi. 10.15376/biores.16.2.3895-3906
- By:
- Publication type:
- Article
27
Improvement of Bamboo Properties via In Situ Construction of Polyhydroxyethyl Methylacrylate and Polymethyl Methylacrylate Networks.
- Published in:
- BioResources, 2018, v. 13, n. 1, p. 6, doi. 10.15376/biores.13.1.6-14
- By:
- Publication type:
- Article
28
A Novel Method for Evaluating the Combustion Characteristics of Carbon Materials and Mold Fluxes.
- Published in:
- Steel Research International, 2021, v. 92, n. 3, p. 1, doi. 10.1002/srin.202000416
- By:
- Publication type:
- Article
29
Erik Laxman, a Pioneering 18th-Century Glass Technologist.
- Published in:
- Journal of Glass Studies, 2010, v. 52, p. 157
- By:
- Publication type:
- Article
30
Die Glasformung durch Gießen und die französische Technologie im 17. Jahrhundert.
- Published in:
- Journal of Glass Studies, 2010, v. 52, p. 69
- By:
- Publication type:
- Article
31
EFECTO DEL RECTIFICADO Y DESGASTE DE CUCHILLOS EN LA CALIDAD SUPERFICIAL DE MOLDURAS DE PINO RADIATA.
- Published in:
- Maderas: Ciencia y Tecnología, 2012, v. 14, n. 2, p. 175, doi. 10.4067/S0718-221X2012000200005
- By:
- Publication type:
- Article
32
Comparative study of crystallization and lamellae orientation of isotactic polypropylene by rapid heat cycle molding and conventional injection molding.
- Published in:
- e-Polymers, 2017, v. 17, n. 1, p. 71, doi. 10.1515/epoly-2016-0251
- By:
- Publication type:
- Article
33
Manufacturing high-consistency microlens arrays on tungsten carbide via electrical discharge machining using micro copper ball–assembled array electrode.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 7/8, p. 3405, doi. 10.1007/s00170-024-14714-1
- By:
- Publication type:
- Article
34
Transfer learning to predict part quality for injection molding with recycled materials.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 7/8, p. 3241, doi. 10.1007/s00170-024-14688-0
- By:
- Publication type:
- Article
35
An advanced machine learning and meta-heuristic approach-based heat transfer assessment of conformal cooling channel in injection molding process.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 3/4, p. 1533, doi. 10.1007/s00170-024-14486-8
- By:
- Publication type:
- Article
36
Surface properties of molds for powder injection molding and their effect on feedstock moldability and mold adhesion.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 381, doi. 10.1007/s00170-023-11148-z
- By:
- Publication type:
- Article
37
Numerical analyses of long fiber–reinforced polymeric sheets processed by Single Point Incremental Forming.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 123, n. 3/4, p. 1203, doi. 10.1007/s00170-022-10212-4
- By:
- Publication type:
- Article
38
Finishing of micro-aspheric tungsten carbide mold using small viscoelastic tool.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 121, n. 5/6, p. 4237, doi. 10.1007/s00170-022-09488-3
- By:
- Publication type:
- Article
39
Comparison of flexural strength of parts fabricated by vacuum casting with different fillers and fused deposition modeling with different printing angles.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 7/8, p. 4693, doi. 10.1007/s00170-021-08491-4
- By:
- Publication type:
- Article
40
Improving a system for the secondary cooling of continuous-cast semifinished products on the basis of information on the actual thermal state of the ingot.
- Published in:
- Metallurgist, 2009, v. 53, n. 3/4, p. 209, doi. 10.1007/s11015-009-9156-x
- By:
- Publication type:
- Article
41
New shape of forging ingot for making hollow forged products.
- Published in:
- Metallurgist, 2007, v. 51, n. 11/12, p. 617, doi. 10.1007/s11015-007-0112-3
- By:
- Publication type:
- Article
42
Trial Addition of Inoculants to the Steel Stream during Bottom-Pouring.
- Published in:
- Metallurgist, 2003, v. 47, n. 9/10, p. 357, doi. 10.1023/B:MELL.0000015263.11090.f2
- By:
- Publication type:
- Article
43
Control of molding pastes for an abrasive tool made of silicon carbide and electrocorundum micropowders in a ceramic binder.
- Published in:
- Glass & Ceramics, 2007, v. 64, n. 9/10, p. 369, doi. 10.1007/s10717-007-0093-5
- By:
- Publication type:
- Article
44
Selection of technology for batch compaction and formation of perforated layer.
- Published in:
- Glass & Ceramics, 2006, v. 63, n. 5/6, p. 175, doi. 10.1007/s10717-006-0069-x
- By:
- Publication type:
- Article
45
APPROACH TO ASSESSMENT OF MICRODAMAGES ACCUMULATED DURING THE CONSTRAINED MOLDING OF SHELLS MADE OF THE MATERIAL SUBJECT TO ENERGY THEORY OF CREEP AND DAMAGE.
- Published in:
- Journal of Chemical Technology & Metallurgy, 2017, v. 52, n. 4, p. 679
- By:
- Publication type:
- Article
46
In situ monitoring of used-sand regeneration in foundries by impedance spectroscopy.
- Published in:
- Journal of Sensors & Sensor Systems, 2022, v. 11, n. 2, p. 287, doi. 10.5194/jsss-11-287-2022
- By:
- Publication type:
- Article
47
Characterization of sand and sand–binder systems from the foundry industry with electrical impedance spectroscopy.
- Published in:
- Journal of Sensors & Sensor Systems, 2021, v. 10, n. 1, p. 43, doi. 10.5194/jsss-10-43-2021
- By:
- Publication type:
- Article
48
SAND-SODIUM-SILICATE MIXTURES STRUCTURED IN STEAM-MICROWAVE ENVIRONMENT EFFECTIVE VALUES OF THERMO-PHYSICAL PROPERTIES.
- Published in:
- Scientific Bulletin of National Mining University, 2021, n. 6, p. 66, doi. 10.33271/nvngu/2021-6/066
- By:
- Publication type:
- Article
49
Controlled cooling of an aluminum alloy casting based on 3D printed rib reinforced shell mold.
- Published in:
- China Foundry, 2018, v. 15, n. 3, p. 210, doi. 10.1007/s41230-018-7252-x
- By:
- Publication type:
- Article
50
A rapid automatic analyzer and its methodology for effective bentonite content based on image recognition technology.
- Published in:
- China Foundry, 2016, v. 13, n. 5, p. 322, doi. 10.1007/s41230-016-5119-6
- By:
- Publication type:
- Article