Works matching IS 02728397 AND DT 2021 AND VI 42 AND IP 11

Results: 46

Tailoring the graphene oxide chemical structure and morphology as a key to polypropylene nanocomposite performance.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 6213, doi. 10.1002/pc.26297

By:

Garcia, Pamela S.;
de Oliveira, Yuri D. C.;
Valim, Fernanda C. F.;
Kotsilkova, Rumiana;
Ivanov, Evgeni;
Donato, Ricardo K.;
Fechine, Guilhermino J. M.;
Andrade, Ricardo J. E.

Publication type:

Article

Effect of hybrid fillers of Mg–Al layered double hydroxide and nanoclay on the mechanical behavior and formability of glass laminate AA5052‐reinforced epoxy composites.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 6196, doi. 10.1002/pc.26296

By:

K., Logesh;
Bright, Renjin J.;
P., Hariharasakthisudhan;
R., Vijayan

Publication type:

Article

Reuse of carbon fiber waste to produce composites with polypropylene. The effect of styrene‐(ethylene‐butylene)‐styrene grafted with maleic anhydride and ethylene‐propylene‐diene grafted with maleic anhydride copolymers.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 6182, doi. 10.1002/pc.26295

By:

Antônio dos Santos Filho, Edson;
Bruno Barreto Luna, Carlos;
Diniz Siqueira, Danilo;
Andrade dos Santos Nogueira, Jessika;
Maria Araújo, Edcleide

Publication type:

Article

Carbon fiber versus glass fiber reinforcements: A novel, true comparison in thermoplastics.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 6173, doi. 10.1002/pc.26294

By:

Chu, Philip F.;
Iwasawa, Shigeo;
Schell, Philip L.;
Lin, Chia‐Yu

Publication type:

Article

Effect of repeated hydrothermal cycling on the durability of glass fiber/epoxy composites with and without carbon nanotube reinforcement.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 6160, doi. 10.1002/pc.26293

By:

Fulmali, Abhinav Omprakash;
Sen, Bhaskar;
Nayak, B. Arnimesh;
Prusty, Rajesh Kumar

Publication type:

Article

Manufacturing of bio‐based thermoplastic composites using industrial process for high‐volume applications.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 6146, doi. 10.1002/pc.26292

By:

Khoun, Loleï;
Bravo, Victor L.;
Champagne, Michel F.

Publication type:

Article

Influence of nanofillers on biodegradable composites: A comprehensive review.

Published in:

2021

By:

Jagadeesh, Praveenkumara;
Puttegowda, Madhu;
Mavinkere Rangappa, Sanjay;
Siengchin, Suchart

Publication type:

Literature Review

The effect of simultaneous heat/fire and impact on carbon fibril and particle release from carbon fiber‐reinforced composites.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 6127, doi. 10.1002/pc.26290

By:

Chapple, Robert;
Kandola, Baljinder K.;
Myler, Peter;
Ferry, Laurent;
Lopez‐Cuesta, José‐Marie;
Chivas‐Joly, Carine;
Erskine, Emmajane L.

Publication type:

Article

The effects of temperature on compressive responses and failure behaviors of composite Y‐frame cores sandwich structure.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 6116, doi. 10.1002/pc.26289

By:

Jiang, Weimin;
Yu, Xiaofei;
Zhou, Junmeng;
Liu, Jiayi;
Huang, Wei

Publication type:

Article

The selection of polyethersulfone/polyvinylpyrrolidone films for industrial application using the multiple‐criteria decision‐making approach.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 6106, doi. 10.1002/pc.26288

By:

Nikouei, Mohammad Ali;
Mosaffa, Elias;
Amiri, Maghsoud

Publication type:

Article

Turning wastes into value‐added materials: Polystyrene nanocomposites (PS‐AgNPs) from waste thermocol and green synthesized silver nanoparticles for water disinfection application.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 6094, doi. 10.1002/pc.26287

By:

Bag, Subhendu Sekhar;
Bora, Anupama;
Golder, Animes Kr.

Publication type:

Article

Bond behavior of BFRP bars in concrete under lateral pressure.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 6080, doi. 10.1002/pc.26286

By:

Zhao, Yushuai;
Zhang, Yingying;
Yu, Penghao;
Xu, Junhao

Publication type:

Article

Investigation of metal‐polymer composites manufactured by fused deposition modeling with regard to process parameters.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 6065, doi. 10.1002/pc.26285

By:

Moritzer, Elmar;
Elsner, Christian Lennart;
Schumacher, Christian

Publication type:

Article

Effect of different dosages of carbon nanotubes on the metal friction and metal wear in the mixing process.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 6051, doi. 10.1002/pc.26284

By:

Han, Deshang;
Li, Shuang;
Xiao, Xinxin;
Xu, Minghui;
Chen, Yihui;
Wang, Chuansheng;
Bian, Huiguang

Publication type:

Article

Large deformation bending of single‐ply fabric reinforced polymer composite.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 6038, doi. 10.1002/pc.26283

By:

Gao, Jifeng;
Chen, Wujun;
Chen, Jubing;
Hu, Jianhui;
Zhao, Bing;
Zhang, Daxu;
Fang, Guangqiang;
Peng, Fujun

Publication type:

Article

Effect of process parameters on thermal and mechanical properties of polymer‐based composites using fused filament fabrication.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 6025, doi. 10.1002/pc.26282

By:

Benfriha, Khaled;
Ahmadifar, Mohammad;
Shirinbayan, Mohammadali;
Tcharkhtchi, Abbas

Publication type:

Article

Rheological investigation of nylon‐carbon fiber composites fabricated using material extrusion‐based additive manufacturing.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 6010, doi. 10.1002/pc.26281

By:

Das, Arit;
Etemadi, Martin;
Davis, Bradley A.;
McKnight, Steven H.;
Williams, Christopher B.;
Case, Scott W.;
Bortner, Michael J.

Publication type:

Article

Improved mechanical performance and unique toughening mechanisms of UDM processed epoxy‐SiO2 nanocomposites.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 6000, doi. 10.1002/pc.26280

By:

Kumar, Kaushal;
Goyat, Manjeet S.;
Solanki, Ankur;
Kumar, Arun;
Kant, Ravi;
Ghosh, Prakriti K.

Publication type:

Article

Compressive fatigue response and reliability analysis of thermoplastic composite with low‐velocity impact damage.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 5678, doi. 10.1002/pc.26279

By:

Chen, Jiwei;
Yao, Weixing;
Lin, Hanyu

Publication type:

Article

An investigation into mechanical properties of jute–polyester laminates for numerical prediction of strength and failure.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 5975, doi. 10.1002/pc.26278

By:

Karthika, Muthuthevar Ramamoorthy;
Deb, Anindya;
Venkatesh, Gude Subbaraya

Publication type:

Article

Fabrication of continuous carbon fiber reinforced polyamide 6 composites by means of self‐resistance electric heating.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 5962, doi. 10.1002/pc.26277

By:

Wang, Xiaoyu;
Liu, Yunhuan;
He, Qingzhu;
Weng, Can;
Zhai, Zhanyu

Publication type:

Article

Temperature effect on thermal, mechanical, and electrical properties of Ag nanoparticle filled thermoplastic polyurethane composites.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 5952, doi. 10.1002/pc.26276

By:

Chen, Xin‐Gang;
Li, Ang;
Zhang, Yang‐Fei

Publication type:

Article

Fused deposition modeling based polymeric materials and their performance: A review.

Published in:

2021

By:

Shanmugam, Vigneshwaran;
Pavan, Munagoti Venkata;
Babu, Karthik;
Karnan, Balamurugan

Publication type:

Literature Review

An overview on current manufacturing technologies: Processing continuous rovings impregnated with thermoset resin.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 5630, doi. 10.1002/pc.26274

By:

Arrabiyeh, Peter A.;
May, David;
Eckrich, Maximilian;
Dlugaj, Anna M.

Publication type:

Article

Critical assessment of structural changes in some copolyamide‐clay hybrid materials in correlation with the filler characteristics.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 5936, doi. 10.1002/pc.26273

By:

Zănoagă, Mădălina;
Airinei, Anton;
Fifere, Nicuşor;
Grigoraş, Cristian‐Vasile;
Ţîmpu, Daniel;
Tanasă, Fulga

Publication type:

Article

A comparative study on dry‐sliding wear behavior of graphene oxide/epoxy nanocomposites functionalized by amino‐ and epoxy‐silane coupling agents.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 5930, doi. 10.1002/pc.26272

By:

Jamali, Nahid;
Rezvani, Alireza;
Khosravi, Hamed;
Tohidlou, Esmaeil

Publication type:

Article

3D printing of continuous carbon fiber reinforced thermoset composites using UV curable resin.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 5859, doi. 10.1002/pc.26266

By:

Rahman, Md Atikur;
Islam, Md Zahirul;
Gibbon, Luke;
Ulven, Chad A.;
La Scala, John J.

Publication type:

Article

Polyamide nanocomposites containing hydrazide–hydrazone group reinforced with functionalized polyethyleneimine modified Mg(OH)2 nanoparticles: Study on thermal properties, combustion resistance, and lead ion adsorption.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 5904, doi. 10.1002/pc.26270

By:

Hajibeygi, Mohsen;
Faramarzinia, Shayan

Publication type:

Article

Interfacial behavior of graphene carboxyl‐grafted carbon fiber reinforced polymer composites at elevated temperatures: Emphasis on the effect of electrophoretic deposition time.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 5893, doi. 10.1002/pc.26269

By:

Gangineni, Pavan Kumar;
Patnaik, Satyaroop;
Gupta K., B. N. V. S. Ganesh;
Prusty, Rajesh Kumar;
Ray, Bankim Chandra

Publication type:

Article

MWCNT, nano‐silica, and nano‐clay additives effects on adhesion performance of dissimilar materials bonded joints.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 5880, doi. 10.1002/pc.26268

By:

Cakir, Mehmet Veysel;
Kinay, Didem

Publication type:

Article

The relation of porosity and creep behavior of glass fiber/epoxy composite: Design of experiments approach.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 5869, doi. 10.1002/pc.26267

By:

Alves, Fillip Cortat;
Monticeli, Francisco Maciel;
Voorwald, Herman Jacobus Cornelis;
Cioffi, Maria Odila Hilário

Publication type:

Article

Accelerated aging effects in composites used as repair for pipes in oil industry.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 5918, doi. 10.1002/pc.26271

By:

L. da Rocha, Mirella;
de O. Leite, Maraisa C.;
P. da C. Ferreira, Evans;
D. Melo, José D.;
C. Barbosa, Ana Paula

Publication type:

Article

Graphene functionalized with nanosilver particle‐modified methacrylate‐based bonding agent improves antimicrobial capacity and mechanical strength at tooth orthodontic bracket interface.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 5850, doi. 10.1002/pc.26265

By:

Sawan, Nozha M.;
AlSagob, Eman I.;
Ben Gassem, Afnan A.;
Alshami, Abeer A.

Publication type:

Article

MoS2‐decorated talc hybrid for improving the tribological property of Nomex/PTFE fabric composites.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 5839, doi. 10.1002/pc.26264

By:

Li, Peilong;
Zhang, Zhaozhu;
Yang, Mingming;
Yuan, Junya;
Jiang, Wei

Publication type:

Article

Self‐assembled carbon nanofibers–silica nanocomposites for hydrogenated nitrile butadiene rubber reinforcement.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 5830, doi. 10.1002/pc.26263

By:

Wang, Fanghui;
Dong, Shengnan;
Wang, Zhongying;
He, Huan;
Huang, Xidai;
Liu, Dexin;
Zhu, Hong

Publication type:

Article

Laminate design, optimization, and testing of an innovative carbon fiber‐reinforced composite sandwich panel for high‐speed train.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 5811, doi. 10.1002/pc.26262

By:

Tang, Juan;
Zhou, Zhiping;
Chen, Hao;
Wang, Shiyou;
Gutiérrez, Asier;
Zhang, Chi;
Deng, Jiakang

Publication type:

Article

Biocomposites with high strength and thermal and noise insulation by reinforcing polypropylene with stems and fibers from Arundinaria gigantea.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 5801, doi. 10.1002/pc.26261

By:

Hu, Chunyan;
Vittal, Jayanth;
Guna, Vijaykumar;
Zhao, Yi;
Chikkamaranahalli Boganarasimhaiah, Mohan;
Reddy, Narendra

Publication type:

Article

The effect of thickness on the multiwalled carbon nanotubes performance in glass/epoxy composite laminates under dynamic loading.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 5789, doi. 10.1002/pc.26260

By:

Emdadi Derabi, Mohammad;
Sangsefidi, Milad;
Rahmani, Omid

Publication type:

Article

Poly(acrylated epoxidized soybean oil)‐modified carbon nanotubes and their application in epoxidized soybean oil‐based thermoset composites.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 5774, doi. 10.1002/pc.26259

By:

Tang, Qiuyu;
Li, Qian;
Pan, Xun;
Xi, Zhenhao;
Zhao, Ling

Publication type:

Article

Damped harmonic vibrations of axisymmetric graphene‐enhanced cylinders in thermal environment.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 5763, doi. 10.1002/pc.26258

By:

Moradi‐Dastjerdi, Rasool;
Behdinan, Kamran

Publication type:

Article

An experimental investigation on the flexural and wear properties of multiscale nanoclay/basalt fiber/epoxy composites.

Published in:: Polymer Composites, 2021, v. 42, n. 11, p. 5755, doi. 10.1002/pc.26257
Publication type:: Article

Effect of non‐woven flax mat manufacturing parameters and consolidation pressure on properties of composites manufactured using vacuum‐assisted resin transfer molding.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 5743, doi. 10.1002/pc.26256

By:

Shadhin, Md;
Jayaraman, Raghavan;
Rahman, Mashiur

Publication type:

Article

Impregnation modeling and preparation optimization of continuous glass fiber reinforced polylactic acid filament for 3D printing.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 5731, doi. 10.1002/pc.26255

By:

Yu, Liguo;
Chen, Ke;
Xue, Ping;
Cui, Yonghui;
Jia, Mingyin

Publication type:

Article

Characterization/mechanical behavior of AgCuOSnO2 composites: Experimental and finite element study.

Published in:

Polymer Composites, 2021, v. 42, n. 11, p. 5721, doi. 10.1002/pc.26254

By:

Li, Jintao;
Yang, Minjie;
Zhou, Xiaolong

Publication type:

Article

Buckling analysis of graphene nanoplatelets‐doped carbon/aramid hybrid polymer composite plates.

Published in:: Polymer Composites, 2021, v. 42, n. 11, p. 5712, doi. 10.1002/pc.26253
Publication type:: Article

Issue Information.

Published in:: Polymer Composites, 2021, v. 42, n. 11, p. 5625, doi. 10.1002/pc.25659
Publication type:: Article