Works matching IS 02728397 AND DT 2020 AND VI 41 AND IP 1

Results: 34

The effect of two‐dimensional d‐Ti3C2 on the mechanical and thermal conductivity properties of thermoplastic polyurethane composites.

Published in:

Polymer Composites, 2020, v. 41, n. 1, p. 350, doi. 10.1002/pc.25374

By:

Wang, Xiaolong;
Wang, Libo;
He, Yan;
Wu, Meng;
Zhou, Aiguo

Publication type:

Article

Improvement in thermal, mechanical, and barrier properties of biocomposite of poly (3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate)/modified nano‐SiO2.

Published in:

Polymer Composites, 2020, v. 41, n. 1, p. 381, doi. 10.1002/pc.25377

By:

Li, Dongna;
Fu, Jirui;
Ma, Xiaojun

Publication type:

Article

Natural rubber nanocomposites with MWCNT@POSS hybrid filler: Preparation and properties.

Published in:

Polymer Composites, 2020, v. 41, n. 1, p. 369, doi. 10.1002/pc.25376

By:

Somasekharan, Lakshmipriya;
Xavier, Priti;
Bose, Suryasarathi;
Zachariah, Ajesh K.;
Kalarikkal, Nandakumar;
Anil Kumar, S.;
Thomas, Sabu

Publication type:

Article

Dielectric properties of epoxy resin impregnated paper insulation in different stages of partial discharge development.

Published in:

Polymer Composites, 2020, v. 41, n. 1, p. 360, doi. 10.1002/pc.25375

By:

Wang, Yongqiang;
Luo, Yu;
Guan, Jie;
Ding, Renjie

Publication type:

Article

Mechanical, microstructural, and thermal characterization insights of pyrolyzed carbon black from waste tires reinforced epoxy nanocomposites for coating application.

Published in:

Polymer Composites, 2020, v. 41, n. 1, p. 338, doi. 10.1002/pc.25373

By:

Verma, Akarsh;
Baurai, Kriti;
Sanjay, M. R.;
Siengchin, Suchart

Publication type:

Article

Erosive wear characteristics of E‐glass fiber reinforced silica fume and zinc oxide‐filled epoxy resin composites.

Published in:

Polymer Composites, 2020, v. 41, n. 1, p. 326, doi. 10.1002/pc.25372

By:

Öztürk, Bülent;
Gedikli, Hasan;
Kılıçarslan, Yavuz S.

Publication type:

Article

Effect of surface treatments on interfacial properties of natural intralaminar hybrid composites.

Published in:

Polymer Composites, 2020, v. 41, n. 1, p. 314, doi. 10.1002/pc.25371

By:

de Araujo Alves Lima, Rosemere;
Kawasaki Cavalcanti, Daniel;
de Souza e Silva Neto, Jorge;
Meneses da Costa, Hector;
Banea, Mariana Doina

Publication type:

Article

Sub‐nanometer titanium‐oxo cluster‐polymer nanocomposites for elastic, transparent UV‐resistant films and nano‐coatings.

Published in:

Polymer Composites, 2020, v. 41, n. 1, p. 306, doi. 10.1002/pc.25370

By:

Lai, Yuyan;
Zhang, Mingxin;
Yu, Haitao;
Wang, Weiyu;
Yin, Panchao

Publication type:

Article

Functionalized graphenes as nanofillers for polylactide: Molecular dynamics simulation study.

Published in:

Polymer Composites, 2020, v. 41, n. 1, p. 294, doi. 10.1002/pc.25369

By:

Prasitnok, Khongvit;
In‐noi, Orrasa

Publication type:

Article

Fabrication of ternary composites with controlled surface microstructure using a cascaded suspension deposition method.

Published in:

Polymer Composites, 2020, v. 41, n. 1, p. 279, doi. 10.1002/pc.25368

By:

Pishvar, Maya;
Amirkhosravi, Mehrad;
Yalcinkaya, M. Akif;
Altan, M. Cengiz

Publication type:

Article

Printable self‐heating coatings based on the use of carbon nanoreinforcements.

Published in:

Polymer Composites, 2020, v. 41, n. 1, p. 271, doi. 10.1002/pc.25367

By:

Prolongo, Silvia G.;
Moriche, Rocío;
Jiménez‐Suárez, Alberto;
Delgado, Andrea;
Ureña, Alejandro

Publication type:

Article

Experimental and numerical study on the tensile properties of T‐joints with low Z‐pin volume density.

Published in:

Polymer Composites, 2020, v. 41, n. 1, p. 258, doi. 10.1002/pc.25366

By:

Li, Mengjia;
Chen, Puhui;
Li, Xiping;
Gong, Ningning

Publication type:

Article

Thermomechanical postbuckling of pressure‐loaded CNT‐reinforced composite cylindrical shells under tangential edge constraints and various temperature conditions.

Published in:

Polymer Composites, 2020, v. 41, n. 1, p. 244, doi. 10.1002/pc.25365

By:

Hieu, Pham Thanh;
Van Tung, Hoang

Publication type:

Article

Preparation and properties of melt‐spun poly(fluorinated ethylene‐propylene)/graphene composite fibers.

Published in:

Polymer Composites, 2020, v. 41, n. 1, p. 233, doi. 10.1002/pc.25364

By:

Pan, Jinfeng;
Xiao, Changfa;
Huang, Yan;
Zhu, Zhengtao

Publication type:

Article

Computation and modeling of microwave absorbing CuO/graphene nanocomposites.

Published in:

Polymer Composites, 2020, v. 41, n. 1, p. 227, doi. 10.1002/pc.25363

By:

Akinay, Yuksel;
Kizilcay, Abdullah O.

Publication type:

Article

Surface modification of cellulose nanofiber aerogels using phthalimide.

Published in:

Polymer Composites, 2020, v. 41, n. 1, p. 219, doi. 10.1002/pc.25362

By:

Sepahvand, Sima;
Jonoobi, Mehdi;
Ashori, Alireza;
Gauvin, Florent;
Brouwers, H.J.H.;
Yu, Qingliang

Publication type:

Article

Flammability, thermal stability and mechanical properties of polyvinyl alcohol nanocomposites reinforced with delaminated Ti3C2Tx (MXene).

Published in:

Polymer Composites, 2020, v. 41, n. 1, p. 210, doi. 10.1002/pc.25361

By:

Pan, Ying;
Fu, Li;
Zhou, Qingwei;
Wen, Zhenan;
Lin, Cheng‐Te;
Yu, Jinhong;
Wang, Weiming;
Zhao, Hongting

Publication type:

Article

Improvement of water vapor barrier and mechanical properties of sago starch‐kaolinite nanocomposites.

Published in:

Polymer Composites, 2020, v. 41, n. 1, p. 201, doi. 10.1002/pc.25360

By:

Ruamcharoen, Jareerat;
Munlee, Ruszana;
Ruamcharoen, Polphat

Publication type:

Article

Adaptive hinged fiber reinforced plastics with tailored shape memory alloy hybrid yarn.

Published in:

Polymer Composites, 2020, v. 41, n. 1, p. 191, doi. 10.1002/pc.25359

By:

Ashir, Moniruddoza;
Nocke, Andreas;
Hanke, Uwe;
Cherif, Chokri

Publication type:

Article

Constitutive modeling of nonlinear compressive behavior of fiber reinforced polymer composites.

Published in:

Polymer Composites, 2020, v. 41, n. 1, p. 182, doi. 10.1002/pc.25358

By:

Chen, Guangwei;
Suo, Xiaojuan

Publication type:

Article

Influence of zinc oxide nanoparticles on the mechanical and thermal responses of glass fiber‐reinforced epoxy nanocomposites.

Published in:

Polymer Composites, 2020, v. 41, n. 1, p. 174, doi. 10.1002/pc.25357

By:

Thipperudrappa, Sridhar;
Ullal Kini, Achutha;
Hiremath, Anupama

Publication type:

Article

Recent advances in mechanical properties of biopolymer composites: a review.

Published in:

Polymer Composites, 2020, v. 41, n. 1, p. 32, doi. 10.1002/pc.25356

By:

Sadasivuni, Kishor Kumar;
Saha, Prosenjit;
Adhikari, Jaideep;
Deshmukh, Kalim;
Ahamed, M. Basheer;
Cabibihan, John‐John

Publication type:

Article

Effect of yerba mate (Ilex paraguariensis) residue and coupling agent on the mechanical and thermal properties of polyolefin‐based composites.

Published in:

Polymer Composites, 2020, v. 41, n. 1, p. 161, doi. 10.1002/pc.25355

By:

Bavasso, Irene;
Bracciale, Maria P.;
Sbardella, Francesca;
Tirillò, Jacopo;
Sarasini, Fabrizio;
Di Palma, Luca

Publication type:

Article

Modified hemp fibers intended for fiber‐reinforced polymer composites used in structural applications—A review. I. Methods of modification.

Published in:

Polymer Composites, 2020, v. 41, n. 1, p. 5, doi. 10.1002/pc.25354

By:

Tanasă, Fulga;
Zănoagă, Mădălina;
Teacă, Carmen‐Alice;
Nechifor, Mărioara;
Shahzad, Asim

Publication type:

Article

Synthesis of organic‐inorganic hybrid nanocomposites based on the acrylate monomers and investigation of scratch resistance of these nanocomposites.

Published in:

Polymer Composites, 2020, v. 41, n. 1, p. 142, doi. 10.1002/pc.25353

By:

Bagheri, Shokufeh;
Kalantari, Maryam;
Fozooni, Samieh;
Hashemipour Rafsanjani, Hassan

Publication type:

Article

Hybrid phthalonitrile‐based materials with advanced mechanical and nuclear shielding performances.

Published in:

Polymer Composites, 2020, v. 41, n. 1, p. 134, doi. 10.1002/pc.25352

By:

Derradji, Mehdi;
Zegaoui, Abdeldjalil;
Medjahed, Aboubakr;
Liu, Wenbin;
Henniche, Abdelkhalek

Publication type:

Article

An investigation into resorcinol formaldehyde carbon aerogel/epoxy coatings: Exploring mechanical properties, ultraviolet stability, and corrosion resistance.

Published in:

Polymer Composites, 2020, v. 41, n. 1, p. 121, doi. 10.1002/pc.25351

By:

Naderi, Mehdi;
Aghabararpour, Mohammad;
Najafi, Mohammad;
Motahari, Siamak

Publication type:

Article

Tribological behavior of glass/sisal fiber reinforced polyester composites.

Published in:

Polymer Composites, 2020, v. 41, n. 1, p. 112, doi. 10.1002/pc.25350

By:

Gehlen, Gustavo S.;
Neis, Patric D.;
Barros, Liu Y.;
Poletto, Jean C.;
Ebeling, Maurício;
Ferreira, Ney F.;
Amico, Sandro C.;
Angrizani, Clarissa C.

Publication type:

Article

Synergistic effect of surface modification of carbon fabrics and multiwall carbon nanotube incorporation for improving tribological properties of carbon fabrics/resin composites.

Published in:

Polymer Composites, 2020, v. 41, n. 1, p. 102, doi. 10.1002/pc.25349

By:

Wang, Beibei;
Fu, Qiangang;
Li, Hejun;
Qi, Lehua;
Lu, Yuanyuan

Publication type:

Article

NiNb2O6‐BaTiO3/poly(arylene ether nitriles) composite film dielectrics with excellent flexibility and high permittivity for organic film capacitors.

Published in:

Polymer Composites, 2020, v. 41, n. 1, p. 94, doi. 10.1002/pc.25348

By:

Huang, Xu;
Zeng, Jingjing;
Yu, Hongtao;
Wei, Xianhua;
Pu, Linyu;
Liu, Jingsong

Publication type:

Article

A simulative overview on fiber predictions models for discontinuous long fiber composites.

Published in:

Polymer Composites, 2020, v. 41, n. 1, p. 73, doi. 10.1002/pc.25346

By:

Kuhn, Christoph;
Koerner, Enrico;
Taeger, Olaf

Publication type:

Article

Balance between bonding and deposition during fused deposition modeling of polycarbonate and acrylonitrile‐butadiene‐styrene composites.

Published in:

Polymer Composites, 2020, v. 41, n. 1, p. 60, doi. 10.1002/pc.25345

By:

Zhou, Ying‐Guo;
Zou, Jia‐Rui;
Wu, Hai‐Hong;
Xu, Bai‐Ping

Publication type:

Article

Issue Information.

Published in:: Polymer Composites, 2020, v. 41, n. 1, p. 1, doi. 10.1002/pc.25312
Publication type:: Article

The effect of the noncovalent functionalization of CNT by ionic liquid on electrical conductivity and electromagnetic interference shielding effectiveness of semi‐biodegradable polypropylene/poly(lactic acid) composites.

Published in:

Polymer Composites, 2020, v. 41, n. 1, p. 82, doi. 10.1002/pc.25347

By:

Soares, Bluma G.;
Cordeiro, Elisangela;
Maia, Jorge;
Pereira, Elaine C. L.;
Silva, Adriana A.

Publication type:

Article

Works matching IS 02728397 AND DT 2020 AND VI 41 AND IP 1

The effect of two‐dimensional d‐Ti<sub>3</sub>C<sub>2</sub> on the mechanical and thermal conductivity properties of thermoplastic polyurethane composites.

Improvement in thermal, mechanical, and barrier properties of biocomposite of poly (3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate)/modified nano‐SiO<sub>2</sub>.

Natural rubber nanocomposites with MWCNT@POSS hybrid filler: Preparation and properties.

Dielectric properties of epoxy resin impregnated paper insulation in different stages of partial discharge development.

Mechanical, microstructural, and thermal characterization insights of pyrolyzed carbon black from waste tires reinforced epoxy nanocomposites for coating application.

Erosive wear characteristics of E‐glass fiber reinforced silica fume and zinc oxide‐filled epoxy resin composites.

Effect of surface treatments on interfacial properties of natural intralaminar hybrid composites.

Sub‐nanometer titanium‐oxo cluster‐polymer nanocomposites for elastic, transparent UV‐resistant films and nano‐coatings.

Functionalized graphenes as nanofillers for polylactide: Molecular dynamics simulation study.

Fabrication of ternary composites with controlled surface microstructure using a cascaded suspension deposition method.

Printable self‐heating coatings based on the use of carbon nanoreinforcements.

Experimental and numerical study on the tensile properties of T‐joints with low Z‐pin volume density.

Thermomechanical postbuckling of pressure‐loaded CNT‐reinforced composite cylindrical shells under tangential edge constraints and various temperature conditions.

Preparation and properties of melt‐spun poly(fluorinated ethylene‐propylene)/graphene composite fibers.

Computation and modeling of microwave absorbing CuO/graphene nanocomposites.

Surface modification of cellulose nanofiber aerogels using phthalimide.

Flammability, thermal stability and mechanical properties of polyvinyl alcohol nanocomposites reinforced with delaminated Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub> (MXene).

Improvement of water vapor barrier and mechanical properties of sago starch‐kaolinite nanocomposites.

Adaptive hinged fiber reinforced plastics with tailored shape memory alloy hybrid yarn.

Constitutive modeling of nonlinear compressive behavior of fiber reinforced polymer composites.

Influence of zinc oxide nanoparticles on the mechanical and thermal responses of glass fiber‐reinforced epoxy nanocomposites.

Recent advances in mechanical properties of biopolymer composites: a review.

Effect of yerba mate (Ilex paraguariensis) residue and coupling agent on the mechanical and thermal properties of polyolefin‐based composites.

Modified hemp fibers intended for fiber‐reinforced polymer composites used in structural applications—A review. I. Methods of modification.

Synthesis of organic‐inorganic hybrid nanocomposites based on the acrylate monomers and investigation of scratch resistance of these nanocomposites.

Hybrid phthalonitrile‐based materials with advanced mechanical and nuclear shielding performances.

An investigation into resorcinol formaldehyde carbon aerogel/epoxy coatings: Exploring mechanical properties, ultraviolet stability, and corrosion resistance.

Tribological behavior of glass/sisal fiber reinforced polyester composites.

Synergistic effect of surface modification of carbon fabrics and multiwall carbon nanotube incorporation for improving tribological properties of carbon fabrics/resin composites.

NiNb<sub>2</sub>O<sub>6</sub>‐BaTiO<sub>3</sub>/poly(arylene ether nitriles) composite film dielectrics with excellent flexibility and high permittivity for organic film capacitors.

A simulative overview on fiber predictions models for discontinuous long fiber composites.

Balance between bonding and deposition during fused deposition modeling of polycarbonate and acrylonitrile‐butadiene‐styrene composites.

Issue Information.

The effect of the noncovalent functionalization of CNT by ionic liquid on electrical conductivity and electromagnetic interference shielding effectiveness of semi‐biodegradable polypropylene/poly(lactic acid) composites.