Works matching DE "FUSED deposition modeling"

Results: 2472

Effect of remelting post‐processing on the impact strength of polypropylene parts printed by fused deposition modeling.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 5, p. 2568, doi. 10.1002/pen.27167

By:

Liu, Chang;
Sun, Dong;
Liu, Guizhou;
Huang, Zhiliang

Publication type:

Article

Characterization of ABS/PETG multi‐material composites 3D printed by print‐pause‐print method.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 5, p. 2353, doi. 10.1002/pen.27151

By:

Eyri, Busra;
Gul, Okan;
Yilmaz, Sinan;
Karsli, N. Gamze;
Yilmaz, Taner

Publication type:

Article

Design for Additive Manufacturing Driven Multi‐Layered Hybrid Mechanical Metamaterials for Improved Mechanical Performance.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 9, p. 1, doi. 10.1002/adem.202402737

By:

Khan, Mehmood;
Haq, Muhammad Rizwan ul;
Khan, Muhammad Salman;
Butt, Shahid Ikramullah;
Nazir, Aamer;
Jan, Asadullah

Publication type:

Article

Reinforced Polymer Composite Filaments in Fused Deposition Modeling of 3D Printing Technology: A Review.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 9, p. 1, doi. 10.1002/adem.202402509

By:

Nekin Joshua, R.;
Sakthivel, Aravind Raj

Publication type:

Article

Mechanical Properties of 3D‐Printed Polymeric Cellular Structures Based on Bifurcating Triply Periodic Minimal Surfaces.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 9, p. 1, doi. 10.1002/adem.202402507

By:

Zhang, Yanhong;
Zhang, Junming;
Chen, Xiaotian;
Yang, Weidong;
Chen, Hao;
Che, Shunai;
Han, Lu

Publication type:

Article

Dynamic Deformation Mechanisms and Mechanical Properties of Additively Manufactured Closed‐Cell Foams of Various Topologies.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 9, p. 1, doi. 10.1002/adem.202401892

By:

Kader, Md Abdul;
Wares, Md Abdul;
Islam, Md Ashraful;
Hazell, Paul Jonathan;
Escobedo, Juan Pablo;
Saadatfar, Mohammad

Publication type:

Article

EFFECT OF HEAT TREATMENT ON THE MECHANICAL PROPERTIES OF NYLON PARTS IN ADDITIVE MANUFACTURING.

Published in:

Scientific Bulletin of National Mining University, 2025, n. 2, p. 121, doi. 10.33271/nvngu/2025-2/121

By:

Tumarchenko, L.;
Vyshnepolskyi, Y.;
Pavlenko, D.

Publication type:

Article

MATERIAL INVESTIGATION AND EFFECT OF PRINTING ORIENTATION, TENSILE SPEED, AND DENSITY ON THE MECHANICAL BEHAVIOUR OF 3D PRINTED PARTS.

Published in:

Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment & Technology, 2024, v. 35, p. 109, doi. 10.35219/awet.2024.10

By:

Amor, K. Ben;
Chatti, S.;
Louhichi, B.

Publication type:

Article

Experimental investigation of laser texturing on surface roughness and wettability of PAHT CF15 fabricated by fused deposition modeling.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6443, doi. 10.1002/pc.29370

By:

Prasad, Shivam;
Prakash, Shashi

Publication type:

Article

Study of the Behavior of 3D Printed Thermoplastic Elastomers Structures Aimed at Emulating Traditional Polyurethane Foams.

Published in:

Macromolecular Symposia, 2024, v. 413, n. 4, p. 1, doi. 10.1002/masy.202400027

By:

Natali, Paola;
Mazzocchetti, Laura;
Bertoldo, Denis;
Campari, Enrico Gianfranco;
Benelli, Tiziana;
Maccaferri, Emanuele;
Giani, Niccolò;
Giorgini, Loris

Publication type:

Article

Experimental Study on Surface Instabilities in FDM Printed Specimens under Compression.

Published in:

Macromolecular Symposia, 2024, v. 413, n. 3, p. 1, doi. 10.1002/masy.202300197

By:

Hamaied, R.;
Montanari, M.;
Spagnoli, A.;
Gao, C.;
Bertolin, C.

Publication type:

Article

A New FE Modelling Approach to Simulate the Inter‐Layer Adherence in Hybrid Sandwich Structures Achievable by Additive Manufacturing.

Published in:

Macromolecular Symposia, 2024, v. 413, n. 3, p. 1, doi. 10.1002/masy.202300181

By:

Garofano, Antonio;
Sellitto, Andrea;
Acanfora, Valerio;
Battaglia, Miriam;
Riccio, Aniello

Publication type:

Article

Influence of Building Position and Printing Scheme on Mechanical Properties of Fused Filament Fabrication PLA Specimens.

Published in:

Macromolecular Symposia, 2023, v. 411, n. 1, p. 1, doi. 10.1002/masy.202300024

By:

De Luca, Alessandro;
Greco, Alessandro;
Perfetto, Donato;
Sepe, Raffaele

Publication type:

Article

Compensation of the Shrinkage Behavior Occurring in Cylindrical Components in the FDM Process.

Published in:

Macromolecular Symposia, 2023, v. 411, n. 1, p. 1, doi. 10.1002/masy.202200185

By:

Koers, Thorsten;
Magyar, Balázs

Publication type:

Article

Adaptive Scaling of Components in the Fused Deposition Modeling Process.

Published in:

Macromolecular Symposia, 2023, v. 411, n. 1, p. 1, doi. 10.1002/masy.202200181

By:

Moritzer, Elmar;
Hecker, Felix

Publication type:

Article

The Understanding the Processing Window of Virgin and Recycled Bio‐based Filaments for 3D Printing Applications.

Published in:

Macromolecular Symposia, 2022, v. 405, n. 1, p. 1, doi. 10.1002/masy.202100291

By:

Patti, Antonella;
Acierno, Stefano;
Cicala, Gianluca;
Zarrelli, Mauro;
Acierno, Domenico

Publication type:

Article

Experimental and Theoretical Investigation of the Mechanical Properties of PHBH Biopolymer Parts Produced by Fused Deposition Modeling.

Published in:

Macromolecular Symposia, 2022, v. 405, n. 1, p. 1, doi. 10.1002/masy.202100283

By:

Nobili, Andrea;
Signorini, Cesare;
Volpini, Valentina

Publication type:

Article

Production of Thermoplastic Composite Filaments for Additive Manufacturing using Recycled Carbon Fibers.

Published in:

Macromolecular Symposia, 2022, v. 405, n. 1, p. 1, doi. 10.1002/masy.202100249

By:

Giani, Niccolò;
Ortolani, Jacopo;
Mazzocchetti, Laura;
Benelli, Tiziana;
Picchioni, Francesco;
Giorgini, Loris

Publication type:

Article

Thermal and Dielectric Properties of 3D Printed Parts Based on Polylactic Acid Filled with Carbon Nanostructures.

Published in:

Macromolecular Symposia, 2022, v. 405, n. 1, p. 1, doi. 10.1002/masy.202100244

By:

Spinelli, Giovanni;
Kotsilkova, Rumiana;
Ivanov, Evgeni;
Georgiev, Vladimir;
Naddeo, Carlo;
Romano, Vittorio

Publication type:

Article

Redesign of a Metallic Component Using Polylactic Acid – PLA by Fused Deposition Modeling – FDM for Durability Increase.

Published in:

Macromolecular Symposia, 2022, v. 405, n. 1, p. 1, doi. 10.1002/masy.202100221

By:

Jiga, Gabriel;
Crunţeanu, Daniel‐Eugeniu;
Dobrescu, Tiberiu Gabriel;
Brăileanu, Patricia Isabela;
Pascu, Nicoleta Elisabeta

Publication type:

Article

Research of Continuous Carbon Fiber Content in Porous Composite Structures Produced by Using Additive Manufacturing Technology.

Published in:

Macromolecular Symposia, 2022, v. 404, n. 1, p. 1, doi. 10.1002/masy.202100429

By:

Maqsood, Nabeel;
Rimašauskas, Marius

Publication type:

Article

Determining the Influencing Factors on the Cooling of a 3D Printed Thermoforming Mould.

Published in:

Macromolecular Symposia, 2022, v. 404, n. 1, p. 1, doi. 10.1002/masy.202100399

By:

Boca, Marius‐Andrei;
Sover, Alexandru;
Slătineanu, Laurențiu

Publication type:

Article

Development of a Procedure for the Assessment of Material Potentials Under Consideration of the Weld Seam Quality for Multi‐material Applications in the FDM Process.

Published in:

Macromolecular Symposia, 2022, v. 404, n. 1, p. 1, doi. 10.1002/masy.202100389

By:

Moritzer, Elmar;
Wächter, Julian

Publication type:

Article

Comparison of Three Additive Manufacturing (AM) Techniques for Manufacturing Complex Hollow Composite Parts.

Published in:

Macromolecular Symposia, 2022, v. 404, n. 1, p. 1, doi. 10.1002/masy.202100340

By:

Tosto, Claudio;
Pergolizzi, Eugenio;
Cicala, Gianluca

Publication type:

Article

Modeling of Manufacturing Induced Residual Stress in 3D‐Printed Components.

Published in:

Macromolecular Symposia, 2022, v. 403, n. 1, p. 1, doi. 10.1002/masy.202100465

By:

Panchasara, Kevin Mahendrabhai;
Ramakrishnan, Anantha Narayanan;
Mehle, Konrad;
Ludtka, Christopher;
Schwan, Stefan

Publication type:

Article

Experimental Stand Design for an Automatic Wiping Board Concept.

Published in:

Macromolecular Symposia, 2021, v. 396, n. 1, p. 1, doi. 10.1002/masy.202000298

By:

Nută, Andrei‐Bogdan;
Ulmeanu, Mihaela‐Elena;
Doicin, Cristian‐Vasile;
Enache, Andrei‐George;
Tunsoiu, Nicolae

Publication type:

Article

Stainless Steel Parts Produced by Fused Deposition Modeling and a Sintering Process Compared to Components Manufactured in Selective Laser Melting.

Published in:

Macromolecular Symposia, 2021, v. 395, n. 1, p. 1, doi. 10.1002/masy.202000275

By:

Schumacher, Christian;
Moritzer, Elmar

Publication type:

Article

Investigation of Specific FDM Process Parameters to Optimize the Polymer Discharge of Carbon Fiber Reinforced PEEK.

Published in:

Macromolecular Symposia, 2021, v. 395, n. 1, p. 1, doi. 10.1002/masy.202000269

By:

Wächter, Julian;
Elsner, Christian Lennart;
Moritzer, Elmar

Publication type:

Article

Additive Manufacturing Processing of Plastics for Mass Production of Composites Tooling: Technical and Economic Analysis.

Published in:

Macromolecular Symposia, 2021, v. 395, n. 1, p. 1, doi. 10.1002/masy.202000256

By:

Cicala, Gianluca;
Tosto, Claudi;
Recca, Giuseppe;
Patti, Antonella

Publication type:

Article

Fused Deposition Modelling (FDM): New Standards for Mechanical Characterization.

Published in:

Macromolecular Symposia, 2021, v. 395, n. 1, p. 1, doi. 10.1002/masy.202000253

By:

Tosto, Claudio;
Saitta, Lorena;
Pergolizzi, Eugenio;
Patti, Antonella;
Celano, Giovanni;
Cicala, Gianluca

Publication type:

Article

3D Printing with Flexible Materials – Mechanical Properties and Material Fatigue.

Published in:

Macromolecular Symposia, 2021, v. 395, n. 1, p. 1, doi. 10.1002/masy.202000203

By:

Cakar, Siver;
Ehrmann, Andrea

Publication type:

Article

Evaluation of Printing Parameters on Porosity and Mechanical Properties of 3D Printed PLA/PBAT Blend Parts.

Published in:

Macromolecular Symposia, 2020, v. 394, n. 1, p. 1, doi. 10.1002/masy.202000157

By:

Cardoso, Paulo Henrique Machado;
Coutinho, Rafaella Rabello Teixeira Perdone;
Drummond, Flávia Rocha;
da Conceição, Marceli do Nascimento;
Thiré, Rossana Mara da Silva Moreira

Publication type:

Article

Direct 3D Printing of Poly(lactic acid) on Cotton Fibers: Characterization of Materials and Study of Adhesion Properties of the Resulting Composites.

Published in:

Macromolecular Symposia, 2020, v. 394, n. 1, p. 1, doi. 10.1002/masy.201900190

By:

Redondo, Franco Leonardo;
Giaroli, María Carolina;
Villar, Marcelo Armando;
Freitas, Augusto Gonzaga Oliveira;
Ciolino, Andrés Eduardo;
Ninago, Mario Daniel

Publication type:

Article

Accuracy of Polylactide Parts Made by 3D Printing.

Published in:

Macromolecular Symposia, 2020, v. 389, n. 1, p. 1, doi. 10.1002/masy.201900064

By:

Hriţuc, Adelina;
Slătineanu, Laurenţiu;
Mihalache, Andrei;
Dodun, Oana;
Coteaţă, Margareta;
Nagîţ, Gheorghe

Publication type:

Article

Pressure‐assisted binder jetting for additive manufacturing of mock energetic composites.

Published in:

Propellants, Explosives, Pyrotechnics, 2024, v. 49, n. 1, p. 1, doi. 10.1002/prep.202300175

By:

Kirby, Levi;
Udaykumar, H. S.;
Song, Xuan

Publication type:

Article

Microwave Radiation Assisted Construction of Fused Deposition Modeling 3D Printing Flexible Sensors.

Published in:

Macromolecular Chemistry & Physics, 2024, v. 225, n. 24, p. 1, doi. 10.1002/macp.202400284

By:

Hu, Xueling;
Zheng, Yanling;
Kuzhandaivel, Dhandapani;
Ding, Xiaohong;
Wu, Lixin;
Wang, Jianlei;
Lin, Xianliang;
Hu, Xiaoyong;
Zhang, Xu

Publication type:

Article

Heterophase materials for fused filament fabrication of structural electronics.

Published in:

Journal of Materials Science: Materials in Electronics, 2019, v. 30, n. 2, p. 1236, doi. 10.1007/s10854-018-0391-4

By:

Podsiadły, B.;
Skalski, A.;
Wałpuski, B.;
Słoma, M.

Publication type:

Article

Mechanical and microwave absorption properties of 3D-printed Li0.44Zn0.2Fe2.36O4/polylactic acid composites using fused deposition modeling.

Published in:

Journal of Materials Science: Materials in Electronics, 2018, v. 29, n. 22, p. 19296, doi. 10.1007/s10854-018-0056-3

By:

Qian, Yi;
Yao, Zhengjun;
Lin, Haiyan;
Zhou, Jintang

Publication type:

Article

An investigation of the microstructure and tribological behavior of polyether ether ketone composites fabricated by extrusion‐based additive manufacturing.

Published in:

Polymer International, 2024, v. 73, n. 7, p. 516, doi. 10.1002/pi.6624

By:

Lv, Xiancheng;
Yang, Shuyan;
Pei, Xianqiang;
Zhang, Yaoming;
Wang, Qihua;
Wang, Tingmei

Publication type:

Article

Recent trends in the additive manufacturing of polyurethanes.

Published in:

Polymer International, 2024, v. 73, n. 1, p. 5, doi. 10.1002/pi.6584

By:

Bean, Ren H;
Long, Timothy E

Publication type:

Article

Fused filament fabrication of polyetheretherketone/multiwalled carbon nanotube nanocomposites: the effect of thermally conductive nanometric filler on the printability and related properties.

Published in:

Polymer International, 2021, v. 70, n. 8, p. 1080, doi. 10.1002/pi.6206

By:

Rinaldi, Marianna;
Ghidini, Tommaso;
Nanni, Francesca

Publication type:

Article

Effect of molecular weight on mechanical properties and microstructure of 3D printed poly(ether ether ketone).

Published in:

Polymer International, 2021, v. 70, n. 8, p. 1065, doi. 10.1002/pi.6166

By:

Xu, Qinfei;
Shang, Yingshuang;
Jiang, Zilong;
Wang, Zhaoyang;
Zhou, Chenyi;
Liu, Xin;
Yan, Qixing;
Li, Xuefeng;
Zhang, Haibo

Publication type:

Article

Optimizing 3D printing performance of acrylonitrile‐butadiene‐styrene composites with cellulose nanocrystals/silica nanohybrids.

Published in:

Polymer International, 2019, v. 68, n. 7, p. 1351, doi. 10.1002/pi.5824

By:

Huang, Bai;
He, Hui;
Meng, Shuna;
Jia, Yunchao

Publication type:

Article

Optimizing 3D printing process parameters to improve surface quality and investigate the microstructural characteristics of PLA material.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 138, n. 2, p. 457, doi. 10.1007/s00170-025-15543-6

By:

Kidie, Fikadu Mequant;
Ayaliew, Tesfa Guadie;
Mekonone, Samuel Tesfaye

Publication type:

Article

STEP-NC in additive manufacturing: a comprehensive review, architecture, and data model proposal.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 11, p. 5751, doi. 10.1007/s00170-025-15290-8

By:

Rodriguez, Efrain;
Alvares, Alberto;
Riaño, Cristhian

Publication type:

Article

Impact of different annealing methods on MEX-printed polyetherketoneketone parts.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 9, p. 5059, doi. 10.1007/s00170-025-15482-2

By:

Butt, Javaid;
Mohaghegh, Vahaj

Publication type:

Article

Innovative approaches and applications of high-efficiency techniques for support structure removal in additive manufacturing.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 9, p. 4947, doi. 10.1007/s00170-025-15436-8

By:

Kuo, Chil-Chyuan;
Jian, Zi-En;
Huang, Song-Hua;
Farooqui, Armaan

Publication type:

Article

Multi-objective optimization of FDM process parameters for 3D-printed polycarbonate using Taguchi-based Gray Relational Analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3709, doi. 10.1007/s00170-025-15392-3

By:

Cicek, Umur I.;
Johnson, Andrew A.

Publication type:

Article

Additive manufacturing of functional gradient thermoplastic composite using fused deposition modelling and coextrusion continuous fibres.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3587, doi. 10.1007/s00170-025-15376-3

By:

Sotov, Anton;
Abdrakhmanova, Anna;
Zaytsev, Alexander;
Popovich, Anatoliy

Publication type:

Article

Improving the strength properties of PLA acetabular liners by optimizing FDM 3D printing: Taguchi approach and finite element analysis validation.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 5, p. 2649, doi. 10.1007/s00170-025-15314-3

By:

Layeb, Nejmeddine;
Barhoumi, Najoua;
Oldal, Istvan;
Keppler, Istvan

Publication type:

Article