Works matching Polyamides
Results: 5000
FLEXIBLE POLYAMIDE VERSUS ACRYLIC RESIN REMOVABLE PROSTHESIS: A SYSTEMATIC REVIEW OF THE LITERATURE.
- Published in:
- International Arab Journal of Dentistry, 2021, v. 12, n. 2, p. 90, doi. 10.12816/0060164
- By:
- Publication type:
- Article
Discussion on Factors Affecting Dyeing of Bio-based Polyamide 5,6 Fibers Compared with Polyamide 6,6 Fibers.
- Published in:
- Journal of Macromolecular Science: Physics, 2023, v. 62, n. 9, p. 463, doi. 10.1080/00222348.2023.2221506
- By:
- Publication type:
- Article
Synthesis and Characterization of Some New Thermally Stable Crystalline Polyamides and Co-Polyamides Bearing Bipyridine Side-Chain Groups.
- Published in:
- Designed Monomers & Polymers, 2011, v. 14, n. 5, p. 475, doi. 10.1163/138577211X587672
- By:
- Publication type:
- Article
From Hazardous Chrysotile and Polyamide Wastes into Sustainable Serpentine/Polyamide Nanocomposite Membrane: Fabrication, Characterization, and Environmental Application.
- Published in:
- Sustainability (2071-1050), 2023, v. 15, n. 9, p. 7060, doi. 10.3390/su15097060
- By:
- Publication type:
- Article
聚酰胺胺改性碳纤维/尼龙复合材料 制备及性能.
- Published in:
- Acta Materiae Compositae Sinica, 2021, v. 38, n. 2, p. 406, doi. 10.13801/j.cnki.fhclxb.20200610.002
- By:
- Publication type:
- Article
对位芳香族聚酰胺纤维/环氧树脂复合材料 防弹性能及其破坏机制.
- Published in:
- Acta Materiae Compositae Sinica, 2019, v. 36, n. 10, p. 2235, doi. 10.13801/j.cnki.fhclxb.20181218.005
- By:
- Publication type:
- Article
Effect of processing techniques on the friction properties of polyamide 1012 filament.
- Published in:
- Basic Sciences Journal of Textile Universities / Fangzhi Gaoxiao Jichu Kexue Xuebao, 2020, v. 33, n. 4, p. 17, doi. 10.13338/j.issn.1006-8341.2020,04.004
- By:
- Publication type:
- Article
Synthesis of Polyamide-Based Microcapsules via Interfacial Polymerization: Effect of Key Process Parameters.
- Published in:
- Materials (1996-1944), 2021, v. 14, n. 19, p. 5895, doi. 10.3390/ma14195895
- By:
- Publication type:
- Article
功能性差别化锦纶短纤维混纺纱线的开发.
- Published in:
- China Textile Leader, 2021, n. 11, p. 53
- By:
- Publication type:
- Article
涤/锦交织塔丝隆织物的设计与生产.
- Published in:
- China Textile Leader, 2020, n. 3, p. 54
- By:
- Publication type:
- Article
Synthesis and Gas-Permeation Characterization of a Novel High-Surface Area Polyamide Derived from 1,3,6,8-Tetramethyl-2,7-diaminotriptycene: Towards Polyamides of Intrinsic Microporosity (PIM-PAs).
- Published in:
- Polymers (20734360), 2019, v. 11, n. 2, p. 361, doi. 10.3390/polym11020361
- By:
- Publication type:
- Article
Rheological characterization of filled polyamide 11 and polyamide 12 solutions in polyols.
- Published in:
- Journal of Applied Polymer Science, 2019, v. 136, n. 47, p. N.PAG, doi. 10.1002/app.48244
- By:
- Publication type:
- Article
Improvement of friction spot welding (FSpW) to join polyamide 6 and polyamide 66/carbon fibre laminate.
- Published in:
- Welding International, 2016, v. 30, n. 4, p. 247, doi. 10.1080/09507116.2015.1096466
- By:
- Publication type:
- Article
High Strain Rate Mechanical Behavior of Polyamide 66 and Polyamide 66-Glass Fiber Reinforced.
- Published in:
- Mechanics of Composite Materials, 2024, v. 59, n. 6, p. 1217, doi. 10.1007/s11029-023-10167-x
- By:
- Publication type:
- Article
A Continuum Damage-Based Anisotropic Hyperelastic Fatigue Model for Short Glass Fiber Reinforced Polyamide 66.
- Published in:
- Mathematics (2227-7390), 2023, v. 11, n. 6, p. 1508, doi. 10.3390/math11061508
- By:
- Publication type:
- Article
石墨烯改性锦纶混纺花式纱的设计及性能分析.
- Published in:
- Cotton Textile Technology, 2022, v. 50, n. 614, p. 43
- By:
- Publication type:
- Article
聚酰胺纤维芳纶1414包覆纱的拉伸性能探讨.
- Published in:
- Cotton Textile Technology, 2021, v. 49, n. 599, p. 60
- By:
- Publication type:
- Article
Biologically active sulfur-containing polyamides as promising anticancer materials.
- Published in:
- Designed Monomers & Polymers, 2023, v. 26, n. 1, p. 150, doi. 10.1080/15685551.2023.2205734
- By:
- Publication type:
- Article
Synthesis and Properties of Organosoluble Fluorinated Polyamides Bearing 2-2′-Thio-bis(4-methyl Phenoxy) Groups.
- Published in:
- Designed Monomers & Polymers, 2009, v. 12, n. 2, p. 119, doi. 10.1163/156855509X412063
- By:
- Publication type:
- Article
New PTFE-polyamide compounds.
- Published in:
- Designed Monomers & Polymers, 2002, v. 5, n. 2/3, p. 317, doi. 10.1163/156855502760158006
- By:
- Publication type:
- Article
TRANSAMIDATION IN THE in situ BLENDING OF POLYAMIDE 1212 WITH POLYAMIDE 6 THROUGH ANIONIC POLYMERIZATION OF CAPROLACTAM.
- Published in:
- Chinese Journal of Polymer Science (World Scientific Publishing Company), 2007, v. 25, n. 5, p. 473, doi. 10.1142/S0256767907002369
- By:
- Publication type:
- Article
Structure and mechanical properties of antibacterial polyamide fiber containing nano-copper.
- Published in:
- Wool Textile Journal, 2021, v. 49, n. 6, p. 1, doi. 10.19333/j.mfkj.20200803705
- By:
- Publication type:
- Article
Investigation of Wear Resistance of Polyamide PA6 Based Composite Materials for Metal - Polymer Plain Bearings and Gears.
- Published in:
- Tribology in Industry, 2023, v. 45, n. 4, p. 643, doi. 10.24874/ti.1526.07.23.09
- By:
- Publication type:
- Article
Study on Dyeing Technology of Polyamide Fabric.
- Published in:
- China Textile Leader, 2014, n. 5, p. 69
- Publication type:
- Article
Latest Technology Developments of Bio-based Polyamide and Its Fiber.
- Published in:
- China Textile Leader, 2014, n. 5, p. 65
- Publication type:
- Article
Self‐lubricating polyamide 6 and polyamide 6.6 microcapsule‐based composites.
- Published in:
- Journal of Applied Polymer Science, 2024, v. 141, n. 35, p. 1, doi. 10.1002/app.55894
- By:
- Publication type:
- Article
Enhanced desalination performance and arsenate removal using semi‐aromatic polyamide‐based pervaporation membranes by modifying with amino‐acids via interfacial polymerization.
- Published in:
- Journal of Applied Polymer Science, 2024, v. 141, n. 1, p. 1, doi. 10.1002/app.54749
- By:
- Publication type:
- Article
Synergistic flame-retardancy of lamellar cerium phenylphosphonate and aluminum diethylphosphinate towards suppressing "candlewick effect" of polyamide 6/carbon fiber composites.
- Published in:
- Journal of Applied Polymer Science, 2023, v. 140, n. 42, p. 1, doi. 10.1002/app.54546
- By:
- Publication type:
- Article
EPDM‐g‐MAH toughened bio‐based polyamide 56 to prepare thermoplastic polyamide elastomer and the performance characterization.
- Published in:
- Journal of Applied Polymer Science, 2022, v. 139, n. 24, p. 1, doi. 10.1002/app.52346
- By:
- Publication type:
- Article
Investigation of the decomplexation of polyamide/CaCl<sub>2</sub> complex toward a green, nondestructive recovery of polyamide from textile waste.
- Published in:
- Journal of Applied Polymer Science, 2021, v. 138, n. 40, p. 1, doi. 10.1002/app.51170
- By:
- Publication type:
- Article
A systematic study on the effects of synthesis conditions of polyamide selective layer on the CO<sub>2</sub>/N<sub>2</sub> separation of thin film composite polyamide membranes.
- Published in:
- Journal of Applied Polymer Science, 2021, v. 138, n. 36, p. 1, doi. 10.1002/app.50927
- By:
- Publication type:
- Article
CELLULOSE REINFORCED POLYAMIDE COMPOSITES: EFFECT OF PREPARATION METHOD ON COMPOSITE PROPERTIES.
- Published in:
- Cellulose Chemistry & Technology, 2023, v. 57, n. 9/10, p. 1087, doi. 10.35812/cellulosechemtechnol.2023.57.96
- By:
- Publication type:
- Article
Influence of montmorillonite and attapulgite clays on the production of polyamide 6 membranes via hot‐press fusion method.
- Published in:
- Polymer Engineering & Science, 2024, v. 64, n. 12, p. 6077, doi. 10.1002/pen.26970
- By:
- Publication type:
- Article
Multifunctional nanocomposites based on a polyamide 6/polyamide 12 blend and multi‐walled carbon nanotubes.
- Published in:
- Polymer Engineering & Science, 2024, v. 64, n. 3, p. 1246, doi. 10.1002/pen.26611
- By:
- Publication type:
- Article
Polyamide 6 and polyamide 66 blends with functionalized polyolefins: Effect of phenomenal increase in viscosity and melt strength of polyamide 66‐based materials.
- Published in:
- Polymer Engineering & Science, 2020, v. 60, n. 12, p. 3095, doi. 10.1002/pen.25540
- By:
- Publication type:
- Article
Comparative Study on Polyamide 11 and Polyamide 10.10 as Matrix Polymers for Biogenic Wood‐Plastic Composites.
- Published in:
- Macromolecular Symposia, 2022, v. 403, n. 1, p. 1, doi. 10.1002/masy.202100492
- By:
- Publication type:
- Article
A facile strategy to achieve room‐temperature organic long afterglow from melt processible, new two‐dimensional polyamide doped γ‐polyamide 6.
- Published in:
- Polymers for Advanced Technologies, 2023, v. 34, n. 7, p. 2312, doi. 10.1002/pat.6052
- By:
- Publication type:
- Article
The preparation of modified polyamide clay nanocomposite/recycled maleic anhydride polyamide 6 and blending with low density polyethylene for film blowing application.
- Published in:
- Polymers & Polymer Composites, 2021, v. 29, p. S631, doi. 10.1177/09673911211015000
- By:
- Publication type:
- Article
Sub‐10 nm Polyamide Nanofiltration Membrane for Molecular Separation.
- Published in:
- Chemistry - An Asian Journal, 2020, v. 15, n. 15, p. 2341, doi. 10.1002/asia.201901485
- By:
- Publication type:
- Article
IMPROVING PHYSICAL PROPERTIES OF POLYAMIDE FIBERS BY USING ATMOSPHERIC PLASMA TREATMENTS.
- Published in:
- Journal of Textile & Apparel / Tekstil ve Konfeksiyon, 2012, v. 22, n. 2, p. 102
- By:
- Publication type:
- Article
Alicyclic polyamide nanofilms with an asymmetric structure for Cl<sup>−</sup>/SO<sub>4</sub><sup>2</sup><sup>−</sup> separation.
- Published in:
- AIChE Journal, 2022, v. 68, n. 1, p. 1, doi. 10.1002/aic.17419
- By:
- Publication type:
- Article
Integrity analysis of polyamide 12 applied in oil pipelines: Integrity analysis of polyamide 12 applied...: I. M. Gomes et al.
- Published in:
- Journal of Thermal Analysis & Calorimetry, 2024, v. 149, n. 24, p. 14615, doi. 10.1007/s10973-024-13843-9
- By:
- Publication type:
- Article
Thermal stability and mechanical behavior of technical bamboo fibers/bio-based polyamide composites.
- Published in:
- Journal of Thermal Analysis & Calorimetry, 2022, v. 147, n. 2, p. 1097, doi. 10.1007/s10973-020-10445-z
- By:
- Publication type:
- Article
A study on the characteristics and pervaporation performance of polyamide thin-film composite membranes with modified polyacrylonitrile as substrate for bioethanol dehydration.
- Published in:
- Polymer International, 2014, v. 63, n. 8, p. 1478, doi. 10.1002/pi.4649
- By:
- Publication type:
- Article
Monitoring biotransformations in polyamide fibres.
- Published in:
- Biocatalysis & Biotransformation, 2004, v. 22, n. 5/6, p. 357, doi. 10.1080/10242420400025828
- By:
- Publication type:
- Article
Kinetics of Radiation-Oxidative Aging of Polyamide Fibers and Composites Based on Them.
- Published in:
- High Energy Chemistry, 2024, v. 58, n. 4, p. 420, doi. 10.1134/S0018143924700267
- By:
- Publication type:
- Article
Nanostructured Composites Based on Polyethylene–Polyamide Blends. II. Probing the Orientation in Polyethylene–Polyamide Nanocomposites and Their Precursors.
- Published in:
- Journal of Macromolecular Science: Physics, 2004, v. 43, n. 1, p. 163, doi. 10.1081/MB-120027756
- By:
- Publication type:
- Article
Chemical Modification of Polyamide Thin-Film Composite Membrane by Surface Grafting of a Vinyl-Based Monomer.
- Published in:
- Journal of Water Chemistry & Technology, 2022, v. 44, n. 2, p. 108, doi. 10.3103/S1063455X22020023
- By:
- Publication type:
- Article
Mechanical properties, moisture absorption, and dyeability of polyamide 5,6 fibers.
- Published in:
- Journal of the Textile Institute, 2016, v. 107, n. 2, p. 208, doi. 10.1080/00405000.2015.1020678
- By:
- Publication type:
- Article
A novel printing method to enhance the fixation of reactive dyes on wool-polyamide fabrics.
- Published in:
- Journal of the Textile Institute, 2011, v. 102, n. 9, p. 790, doi. 10.1080/00405000.2010.522049
- By:
- Publication type:
- Article