Works matching IS 00218995 AND DT 2012 AND VI 126 AND IP 5

Results: 35

Preparation of porous polycaprolactone tubular matrix by salt leaching process.

Published in:

Journal of Applied Polymer Science, 2012, v. 126, n. 5, p. 1505, doi. 10.1002/app.36922

By:

Gupta, Bhuvanesh;
Patra, Shamayita;
Ray, Alok R.

Publication type:

Article

Preparation of poly(styrene- b-2-hydroxyethyl acrylate) block copolymer using reverse iodine transfer polymerization.

Published in:

Journal of Applied Polymer Science, 2012, v. 126, n. 5, p. 1773, doi. 10.1002/app.36926

By:

Greesh, Nagi;
Sanderson, Ronald;
Hartmann, Patrice

Publication type:

Article

Effects of swelling on the viscoelastic properties of polyester films made from glycerol and glutaric acid.

Published in:

Journal of Applied Polymer Science, 2012, v. 126, n. 5, p. 1784, doi. 10.1002/app.36908

By:

Wyatt, Victor T.

Publication type:

Article

Effect of the melt flow index and melt flow rate on the thermal degradation kinetics of commercial polyolefins.

Published in:

Journal of Applied Polymer Science, 2012, v. 126, n. 5, p. 1739, doi. 10.1002/app.36775

By:

Abbas-Abadi, Mehrdad Seifali;
Haghighi, Mehdi Nekoomanesh;
Yeganeh, Hamid

Publication type:

Article

Synthesis of allyl-ended hyperbranched organic silicone resin by halloysite-supported platinum catalyst.

Published in:

Journal of Applied Polymer Science, 2012, v. 126, n. 5, p. 1580, doi. 10.1002/app.36658

By:

Zhang, Daohong;
Huo, Wenjun;
Wang, Jing;
Li, Tingcheng;
Cheng, Xinjian;
Li, Jinlin;
Zhang, Aiqing

Publication type:

Article

Properties of 2,2-Bis[ p-(2′-hydroxy-3′-methacryloxy propoxy)phenyl]propane/Isobornyl (Meth)acrylate copolymers.

Published in:

Journal of Applied Polymer Science, 2012, v. 126, n. 5, p. 1527, doi. 10.1002/app.36629

By:

He, Jingwei;
Liu, Fang;
Luo, Yuanfang;
Jia, Demin

Publication type:

Article

Retracted: Preparation of PMR+PAN resin matrix and its studies on carbon fiber reinforced composite: Hydraulic, chemical, and temperature stability.

Published in:

Journal of Applied Polymer Science, 2012, v. 126, n. 5, p. 1794, doi. 10.1002/app.26336

By:

Gupta, Anand Kumar;
Patel, P. R.;
Kurmvanshi, S. K.;
Bajpai, R.;
Keller, J. M.;
Nema, S. K.

Publication type:

Article

Photopolymerization behavior and phase separation effects in novel polymer dispersed liquid crystal mixture based on urethane trimethacrylate monomer.

Published in:

Journal of Applied Polymer Science, 2012, v. 126, n. 5, p. 1676, doi. 10.1002/app.37000

By:

Nataj, Nahid Hosein;
Jannesari, Ali;
Mohajerani, Ezeddin;
Najafi, Farhood;
Jashnsaz, Hossein

Publication type:

Article

An easy-to-obtain silicone-containing flame retardant and its effects on the combustion of polycarbonate.

Published in:

Journal of Applied Polymer Science, 2012, v. 126, n. 5, p. 1489, doi. 10.1002/app.36873

By:

Ding, Liping;
Song, Rongjun;
Li, Bin

Publication type:

Article

Thermal properties of poly(ethylene terephthalate) recovered from municipal solid waste by steam autoclaving.

Published in:

Journal of Applied Polymer Science, 2012, v. 126, n. 5, p. 1698, doi. 10.1002/app.36752

By:

Holtman, Kevin M.;
Kodama, Alice;
Klamczynski, Artur P.;
Flynn, Allison;
Bozzi, David V.;
Torres, Lennard;
Franqui-Villanueva, Diana;
Mao, Jingdong;
Glenn, Gregory M.;
Orts, William J.

Publication type:

Article

Effect of magnetization on the gel structure and protein electrophoresis in polyacrylamide hydrogel nanocomposites.

Published in:

Journal of Applied Polymer Science, 2012, v. 126, n. 5, p. 1600, doi. 10.1002/app.36660

By:

Thompson, Jeffery W.;
Stretz, Holly A.;
Arce, Pedro E.;
Gao, Hongsheng;
Ploehn, Harry J.;
He, Jibao

Publication type:

Article

Intumescent flame-retarded building parts manufactured from polyolefines as well as from composites of polyolefines and bismaleinimides.

Published in:

Journal of Applied Polymer Science, 2012, v. 126, n. 5, p. 1511, doi. 10.1002/app.36602

By:

Horacek, Heinrich

Publication type:

Article

Taguchi orthogonal array design for the optimization of hydrogel nanoparticles for the intravenous delivery of small-molecule drugs.

Published in:

Journal of Applied Polymer Science, 2012, v. 126, n. 5, p. 1714, doi. 10.1002/app.36778

By:

Hamidi, Mehrdad;
Azadi, Amir;
Ashrafi, Hajar;
Rafiei, Pedram;
Mohamadi-Samani, Soliman

Publication type:

Article

Deformation mechanisms of polypropylene/polystyrene multilayered films.

Published in:

Journal of Applied Polymer Science, 2012, v. 126, n. 5, p. 1593, doi. 10.1002/app.36657

By:

Scholtyssek, S.;
Pfeifer, F.;
Seydewitz, V.;
Adhikari, R.;
Siesler, H. W.;
Michler, G. H.

Publication type:

Article

Morphology and thermal/mechanical properties of alkyl-imidazolium-treated rectorite/epoxy nanocomposites.

Published in:

Journal of Applied Polymer Science, 2012, v. 126, n. 5, p. 1572, doi. 10.1002/app.35496

By:

Hou, Linxi;
Liu, Yan

Publication type:

Article

Effect of clay modification on the morphology and the mechanical/physical properties of ABS/PMMA blends.

Published in:

Journal of Applied Polymer Science, 2012, v. 126, n. 5, p. 1637, doi. 10.1002/app.36953

By:

Nazari, Tayebe;
Garmabi, Hamid;
Arefazar, Ahmad

Publication type:

Article

Effect of the matrix resin structure on the mechanical properties and braking performance of organic brake pads.

Published in:

Journal of Applied Polymer Science, 2012, v. 126, n. 5, p. 1746, doi. 10.1002/app.36751

By:

Wang, Hai-Qing;
Wu, Xing-Yang;
Li, Tong-Sheng;
Liu, Xu-Jun;
Cong, Pei-Hong

Publication type:

Article

Electrospinning fabrication and characterization of poly(vinyl alcohol)/layered double hydroxides composite fibers.

Published in:

Journal of Applied Polymer Science, 2012, v. 126, n. 5, p. 1556, doi. 10.1002/app.36876

By:

Qin, Qing;
Liu, Ya;
Chen, Si-Chong;
Zhai, Fei-Yu;
Jing, Xin-Ke;
Wang, Yu Zhong

Publication type:

Article

Novel redox-active polycarbazole-functionalized polycatechol network films produced by controlled electropolymerization.

Published in:

Journal of Applied Polymer Science, 2012, v. 126, n. 5, p. 1613, doi. 10.1002/app.36670

By:

Huang, Yao;
Lu, Baoyang;
Xu, Jingkun;
Zhu, Guang;
Chen, Shuai;
Yue, Ruirui

Publication type:

Article

Physical wrapping of reduced graphene oxide sheets by polyethylene wax and its modification on the mechanical properties of polyethylene.

Published in:

Journal of Applied Polymer Science, 2012, v. 126, n. 5, p. 1546, doi. 10.1002/app.36898

By:

Cao, Zhenhu;
Song, Pingan;
Fang, Zhengping;
Xu, Yuanyuan;
Zhang, Yan;
Guo, Zhenghong

Publication type:

Article

Synthesis and characterization of slow-release nitrogen fertilizer with water absorbency: Based on poly(acrylic acid-acrylic amide)/Na-bentonite.

Published in:

Journal of Applied Polymer Science, 2012, v. 126, n. 5, p. 1687, doi. 10.1002/app.37007

By:

Qin, Shaohua;
Wu, Zhansheng;
Rasool, Aamir;
Li, Chun

Publication type:

Article

Synthesis and characterization of molecularly imprinted poly(methacrylic acid)/silica hybrid composite materials for selective recognition of lincomycin in aqueous media.

Published in:

Journal of Applied Polymer Science, 2012, v. 126, n. 5, p. 1631, doi. 10.1002/app.36795

By:

Lv, Yun-Kai;
Wang, Li-Min;
Yan, Shuai-Lei;
Wang, Xiao-Hu;
Sun, Han-Wen

Publication type:

Article

Preparation and characterization of poly(chlorotrifluoroethylene- co-ethylvinyl ether)/poly(styrene acrylate) core-shells and SiO2 nanocomposite films via a solution mixing method.

Published in:

Journal of Applied Polymer Science, 2012, v. 126, n. 5, p. 1709, doi. 10.1002/app.36777

By:

Koti Reddy, C.;
Shekharam, T.;
Shailaja, D.

Publication type:

Article

Column adsorption of chromium(VI) by strong alkaline anion-exchange fiber.

Published in:

Journal of Applied Polymer Science, 2012, v. 126, n. 5, p. 1733, doi. 10.1002/app.36634

By:

Wang, Wenqing;
Li, Mingyu;
Zeng, Qingxuan

Publication type:

Article

Preparation and properties of poly(dimethyl siloxane)-colloidal silica/functionalized colloidal silica nanocomposites.

Published in:

Journal of Applied Polymer Science, 2012, v. 126, n. 5, p. 1585, doi. 10.1002/app.36667

By:

Dinkar, Sumi;
Dhanabalan, A.;
Thimmappa, B. H. S.

Publication type:

Article

The effect of melt spinning process parameters on the spinnability of polyetheretherketone.

Published in:

Journal of Applied Polymer Science, 2012, v. 126, n. 5, p. 1564, doi. 10.1002/app.36930

By:

Mylläri, Ville;
Skrifvars, Mikael;
Syrjälä, Seppo;
Järvelä, Pentti

Publication type:

Article

Solid-state graft polymerization of styrene in spherical polypropylene particles in the presence of montmorillonite.

Published in:

Journal of Applied Polymer Science, 2012, v. 126, n. 5, p. 1497, doi. 10.1002/app.36651

By:

Fu, Zhisheng;
Sun, Fangli;
Fan, Zhiqiang

Publication type:

Article

Synthesis and characterization of poly(ether carbonate)s by melt-phase interchange reactions of dihydroxy compounds with alkylene and arylene diphenyl dicarbonates containing ether groups.

Published in:

Journal of Applied Polymer Science, 2012, v. 126, n. 5, p. 1650, doi. 10.1002/app.36945

By:

Al-Qalawi, Hussam R.;
Sweileh, Bassam A.;
Kailani, Mohammad H.

Publication type:

Article

The investigation on the curing process of polysulfide sealant by in situ dielectric analysis.

Published in:

Journal of Applied Polymer Science, 2012, v. 126, n. 5, p. 1725, doi. 10.1002/app.36813

By:

Zhou, Baijie;
He, Dan;
Quan, Yiwu;
Chen, Qingmin

Publication type:

Article

Simulations of a full three-dimensional packing process and flow-induced stresses in injection molding.

Published in:

Journal of Applied Polymer Science, 2012, v. 126, n. 5, p. 1532, doi. 10.1002/app.36648

By:

Li, Xuejuan;
Ouyang, Jie;
Li, Qiang;
Ren, Jinlian

Publication type:

Article

Influence of talc genesis and particle surface on the crystallization kinetics of polypropylene/talc composites.

Published in:

Journal of Applied Polymer Science, 2012, v. 126, n. 5, p. 1763, doi. 10.1002/app.36846

By:

Castillo, L. A.;
Barbosa, S. E.;
Capiati, N. J.

Publication type:

Article

Retracted: Palladium (II)-rare earth metal catalyzed copolymerization of CO and styrene in [bmim]+PF6− ionic liquid.

Published in:

Journal of Applied Polymer Science, 2012, v. 126, n. 5, p. 1795, doi. 10.1002/app.34819

By:

Guo, Jintang;
Hu, Guang;
Gao, Shan;
Li, Peng

Publication type:

Article

Analytical estimate for curing-induced stress and warpage in coating layers.

Published in:

Journal of Applied Polymer Science, 2012, v. 126, n. 5, p. 1623, doi. 10.1002/app.36776

By:

Jansen, K. M. B.;
de Vreugd, J.;
Ernst, L. J.

Publication type:

Article

Magnetic-induced coil-globule transition for polyelectrolytes.

Published in:

Journal of Applied Polymer Science, 2012, v. 126, n. 5, p. 1754, doi. 10.1002/app.36769

By:

Yuan, Bin;
He, Linli;
Zhang, Linxi

Publication type:

Article

Photodegradation and biodegradation by bacteria of mulching films based on ethylene-vinyl acetate copolymer: Effect of pro-oxidant additives.

Published in:

Journal of Applied Polymer Science, 2012, v. 126, n. 5, p. 1664, doi. 10.1002/app.36989

By:

Abrusci, C.;
Pablos, J. L.;
Marín, I.;
Espí, E.;
Corrales, T.;
Catalina, F.

Publication type:

Article

Works matching IS 00218995 AND DT 2012 AND VI 126 AND IP 5

Preparation of porous polycaprolactone tubular matrix by salt leaching process.

Preparation of poly(styrene- b-2-hydroxyethyl acrylate) block copolymer using reverse iodine transfer polymerization.

Effects of swelling on the viscoelastic properties of polyester films made from glycerol and glutaric acid.

Effect of the melt flow index and melt flow rate on the thermal degradation kinetics of commercial polyolefins.

Synthesis of allyl-ended hyperbranched organic silicone resin by halloysite-supported platinum catalyst.

Properties of 2,2-Bis[ p-(2′-hydroxy-3′-methacryloxy propoxy)phenyl]propane/Isobornyl (Meth)acrylate copolymers.

Retracted: Preparation of PMR+PAN resin matrix and its studies on carbon fiber reinforced composite: Hydraulic, chemical, and temperature stability.

Photopolymerization behavior and phase separation effects in novel polymer dispersed liquid crystal mixture based on urethane trimethacrylate monomer.

An easy-to-obtain silicone-containing flame retardant and its effects on the combustion of polycarbonate.

Thermal properties of poly(ethylene terephthalate) recovered from municipal solid waste by steam autoclaving.

Effect of magnetization on the gel structure and protein electrophoresis in polyacrylamide hydrogel nanocomposites.

Intumescent flame-retarded building parts manufactured from polyolefines as well as from composites of polyolefines and bismaleinimides.

Taguchi orthogonal array design for the optimization of hydrogel nanoparticles for the intravenous delivery of small-molecule drugs.

Deformation mechanisms of polypropylene/polystyrene multilayered films.

Morphology and thermal/mechanical properties of alkyl-imidazolium-treated rectorite/epoxy nanocomposites.

Effect of clay modification on the morphology and the mechanical/physical properties of ABS/PMMA blends.

Effect of the matrix resin structure on the mechanical properties and braking performance of organic brake pads.

Electrospinning fabrication and characterization of poly(vinyl alcohol)/layered double hydroxides composite fibers.

Novel redox-active polycarbazole-functionalized polycatechol network films produced by controlled electropolymerization.

Physical wrapping of reduced graphene oxide sheets by polyethylene wax and its modification on the mechanical properties of polyethylene.

Synthesis and characterization of slow-release nitrogen fertilizer with water absorbency: Based on poly(acrylic acid-acrylic amide)/Na-bentonite.

Synthesis and characterization of molecularly imprinted poly(methacrylic acid)/silica hybrid composite materials for selective recognition of lincomycin in aqueous media.

Preparation and characterization of poly(chlorotrifluoroethylene- co-ethylvinyl ether)/poly(styrene acrylate) core-shells and SiO<sub>2</sub> nanocomposite films via a solution mixing method.

Column adsorption of chromium(VI) by strong alkaline anion-exchange fiber.

Preparation and properties of poly(dimethyl siloxane)-colloidal silica/functionalized colloidal silica nanocomposites.

The effect of melt spinning process parameters on the spinnability of polyetheretherketone.

Solid-state graft polymerization of styrene in spherical polypropylene particles in the presence of montmorillonite.

Synthesis and characterization of poly(ether carbonate)s by melt-phase interchange reactions of dihydroxy compounds with alkylene and arylene diphenyl dicarbonates containing ether groups.

The investigation on the curing process of polysulfide sealant by in situ dielectric analysis.

Simulations of a full three-dimensional packing process and flow-induced stresses in injection molding.

Influence of talc genesis and particle surface on the crystallization kinetics of polypropylene/talc composites.

Retracted: Palladium (II)-rare earth metal catalyzed copolymerization of CO and styrene in [bmim]<sup>+</sup>PF<sub>6</sub><sup>−</sup> ionic liquid.

Analytical estimate for curing-induced stress and warpage in coating layers.

Magnetic-induced coil-globule transition for polyelectrolytes.

Photodegradation and biodegradation by bacteria of mulching films based on ethylene-vinyl acetate copolymer: Effect of pro-oxidant additives.