Works matching Tensile testing

Results: 5000

Design and application of artificial ligament tensile and torsion fatigue testing device.

Published in:

Journal of Donghua University (Natural Science Edition), 2021, v. 47, n. 6, p. 78, doi. 10.19886/j.cnki.dhdz.2020.0354

By:

LU Jun;
LI Shujia;
CHEN Hongjie;
TANG Xu;
LAO Jihong;
WANG Lu;
LIN Jing

Publication type:

Article

聚合物基复合材料制样方法对拉伸测试的影响.

Published in:

Construction Machinery & Equipment, 2024, v. 55, n. 11, p. 67

By:

潘星;
余梓钧;
陈俊伟

Publication type:

Article

A NOVEL METHOD FOR TENSILE TESTING OF SMALL DIAMETERNEEDLES.

Published in:

Mechanical Testing & Diagnosis, 2014, v. 2, n. 2, p. 16

By:

Bhattacharyya, Abhishek

Publication type:

Article

Tensile testing as a novel method for quantitatively evaluating bioabsorbable material degradation.

Published in:

Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2012, v. 100B, n. 8, p. 2101, doi. 10.1002/jbm.b.32775

By:

Bowen, Patrick K.;
Gelbaugh, Jesse A.;
Mercier, Phillip J.;
Goldman, Jeremy;
Drelich, Jaroslaw

Publication type:

Article

Application and practical validation of topology optimization technology for the frame of biaxial tensile testing machine.

Published in:

Structural & Multidisciplinary Optimization, 2020, v. 62, n. 3, p. 1519, doi. 10.1007/s00158-020-02547-x

By:

Zhang, Yisheng;
Wu, Xiangdong;
Guan, Bobin;
Zhao, Zhe;
Wan, Min

Publication type:

Article

Deep learning model for early prediction of material fracture in tensile testing.

Published in:

Neural Computing & Applications, 2024, v. 36, n. 18, p. 10461, doi. 10.1007/s00521-024-09641-x

By:

Jubair, Fahed;
Alhamayel, Ahmad;
Aljaiose, Raed;
Darabkh, Khalid A.

Publication type:

Article

In-Situ Tensile Testing of Propellants in SEM: Influence of Temperature.

Published in:

Propellants, Explosives, Pyrotechnics, 2017, v. 42, n. 12, p. 1396, doi. 10.1002/prep.201700178

By:

Di Benedetto, Giuseppe L.;
van Ramshorst, Marthinus C. J.;
Duvalois, Willem;
Hooijmeijer, Peter A.;
van der Heijden, Antoine E. D. M.

Publication type:

Article

New tension mechanism for high-speed tensile testing machine.

Published in:

International Journal of Automotive Technology, 2016, v. 17, n. 6, p. 1033, doi. 10.1007/s12239-016-0101-2

By:

Ruan, B.;
Li, G.;
Chen, Y.;
Mitrouchev, P.;
He, B.;
Lu, L.

Publication type:

Article

4D Porosity Evolution in Additively Manufactured 316L Stainless Steel through In-Situ Tensile Testing and X-Ray Computed Tomography.

Published in:

Experimental Mechanics, 2025, v. 65, n. 4, p. 553, doi. 10.1007/s11340-025-01180-3

By:

Hertz-Eichenrode, D.;
Talebinezhad, H.;
Shmatok, A.;
Fischer, R.D.;
Bremen, S.;
Reichert, W.;
Prorok, B.C.

Publication type:

Article

Mechanical Behavior Characterization of a Stainless Steel Dissimilar Metal Weld Interface : In-situ Micro-Tensile Testing on Carburized Martensite and Austenite.

Published in:

Experimental Mechanics, 2020, v. 60, n. 8, p. 1037, doi. 10.1007/s11340-020-00633-1

By:

Ben Salem, G.;
Héripré, E.;
Bompard, P.;
Chapuliot, S.;
Blouin, A.;
Jacquemoud, C.

Publication type:

Article

Facile Tensile Testing Platform for In Situ Transmission Electron Microscopy of Nanomaterials (Adv. Mater. Interfaces 7/2025).

Published in:

Advanced Materials Interfaces, 2025, v. 12, n. 7, p. 1, doi. 10.1002/admi.202570019

By:

Sari, Bengisu;
Dandu, Medha;
Wood, Nathan;
Hochhalter, Jacob;
Johnson, Amalya C.;
Doeff, Marca;
Liu, Fang;
Raja, Archana;
Scott, Mary;
Dhall, Rohan;
Warren, Roseanne

Publication type:

Article

Facile Tensile Testing Platform for In Situ Transmission Electron Microscopy of Nanomaterials.

Published in:

Advanced Materials Interfaces, 2025, v. 12, n. 7, p. 1, doi. 10.1002/admi.202400750

By:

Sari, Bengisu;
Dandu, Medha;
Wood, Nathan;
Hochhalter, Jacob;
Johnson, Amalya C.;
Doeff, Marca;
Liu, Fang;
Raja, Archana;
Scott, Mary;
Dhall, Rohan;
Warren, Roseanne

Publication type:

Article

A novel tab for tensile testing of unidirectional thermoplastic composites.

Published in:

Journal of Thermoplastic Composite Materials, 2019, v. 32, n. 1, p. 37, doi. 10.1177/0892705717743295

By:

Tahir, Mazlina Mohd;
Wang, Wen-Xue;
Matsubara, Terutake

Publication type:

Article

On the relevance of uniaxial tensile testing of urogynecological prostheses: the effect of displacement rate.

Published in:

International Urogynecology Journal, 2013, v. 24, n. 1, p. 161, doi. 10.1007/s00192-012-1815-y

By:

Bazi, Tony;
Ammouri, Ali;
Hamade, Ramsey

Publication type:

Article

Tensile and Shear Testing of Basalt Fiber Reinforced Polymer (BFRP) and Hybrid Basalt/Carbon Fiber Reinforced Polymer (HFRP) Bars.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5839, doi. 10.3390/ma13245839

By:

Protchenko, Kostiantyn;
Zayoud, Fares;
Urbański, Marek;
Szmigiera, Elżbieta

Publication type:

Article

Optimal Geometry for Focused Ion Beam-Milled Samples for Direct-Pull Micro-Tensile Testing Performed In Situ in a Scanning Electron Microscope.

Published in:

Materials (1996-1944), 2024, v. 17, n. 21, p. 5144, doi. 10.3390/ma17215144

By:

Yin, Daniel B.;
Sun, Haiping;
Misra, Amit

Publication type:

Article

Modified Slow-Strain-Rate Tensile Testing Method for Evaluation of Room-temperature Hydrogen Embrittlement Susceptibility and Its Application to 23Cr2Ni4MoV Steel.

Published in:

Chinese Journal of Mechanical Engineering, 2024, v. 37, n. 1, p. 1, doi. 10.1186/s10033-024-01133-2

By:

Lv, Sanshu;
Chen, Xuedong;
Fan, Zhichao;
Zhou, Yu;
Yang, Hao;
Zhang, Qiang;
Chi, Mingjian;
Li, Yue

Publication type:

Article

Design and validation of a vacuum assisted anchorage for the uniaxial tensile testing of soft materials.

Published in:

Soft Materials, 2016, v. 14, n. 2, p. 72, doi. 10.1080/1539445X.2016.1141787

By:

Blose, Kory J.;
Pichamuthu, Joseph E.;
Weinbaum, Justin S.;
Vorp, David A.

Publication type:

Article

A NEW APPROACH TO TENSILE TESTING OF GFRP BARS.

Published in:

Journal of Engineering & Architectural Faculty of Eskisehir Osmangazi University / Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi, 2023, v. 31, n. 3, p. 826, doi. 10.31796/ogummf.1322110

By:

AYBAR, Kerem;
YILDIRIM, Meltem ERYILMAZ;
CANBAZ, Mehmet

Publication type:

Article

Micromechanical Tensile Testing of Cellulose-Reinforced Electrospun Fibers Using a Template Transfer Method (TTM).

Published in:

Journal of Polymers & the Environment, 2012, v. 20, n. 4, p. 967, doi. 10.1007/s10924-012-0486-6

By:

Andersson, Richard;
Salajkova, Michaela;
Mallon, Peter;
Berglund, Lars;
Hedenqvist, Mikael;
Olsson, Richard

Publication type:

Article

Dynamic Tensile Testing of Ultrahigh Strength Hot Stamped Martensitic Steels.

Published in:

Steel Research International, 2017, v. 88, n. 3, p. n/a, doi. 10.1002/srin.201600144

By:

Taylor, Tom;
Danks, Stephen;
Fourlaris, George

Publication type:

Article

Elucidating white-etching matter through high-strain rate tensile testing.

Published in:

Materials Science & Technology, 2017, v. 33, n. 3, p. 307, doi. 10.1080/02670836.2016.1195981

By:

Solano-Alvarez, W.;
Duff, J.;
Smith, M. C.;
Bhadeshia, H. K. D. H.

Publication type:

Article

MATHEMATICAL MODEL OF NECK FORMATION DURING TENSILE TESTING OF CYLINDRICAL SPECIMEN.

Published in:

Journal of Chemical Technology & Metallurgy, 2020, v. 55, n. 3, p. 544

By:

Erpalov, Mikhail V.;
Nukhov, Danis Sh.;
Pavlov., Dmitry A.

Publication type:

Article

MATHEMATICAL MODEL OF NECK FORMATION DURING TENSILE TESTING OF CYLINDRICAL SPECIMEN.

Published in:

Journal of Chemical Technology & Metallurgy, 2020, v. 55, n. 3, p. 544

By:

Erpalov, Mikhail V.;
Nukhov, Danis Sh.;
Pavlov, Dmitry A.

Publication type:

Article

Technical Issues in Tensile Testing of Freestanding Metallic Film Glued onto a Micromachined Silicon Substrate.

Published in:

Journal of the Japanese Society for Experimental Mechanics, 2022, v. 22, n. 2, p. 120

By:

Michiko SHINDO;
Daisuke YASUGI;
Takahiro NAMAZU

Publication type:

Article

Optimum Specimen Geometry for Accurate Tensile Testing of Superplastic Metallic Materials.

Published in:

Experimental Mechanics, 2011, v. 51, n. 6, p. 903, doi. 10.1007/s11340-010-9396-5

By:

Abu-Farha, F.;
Nazzal, M.;
Curtis, R.

Publication type:

Article

PROPOSAL TO USE WIRE ELECTRIC DISCHARGE MACHINING TO PREPARE TENSILE TESTING SAMPLES FOR AEROSPACE TITANIUM ALLOY TI-6AL-4V.

Published in:

Nonconventional Technologies Review / Revista de Tehnologii Neconventionale, 2020, v. 24, n. 4, p. 30

By:

Cupșan, Vlad Ciprian;
Țîțu, Mihail Aurel

Publication type:

Article

Calculation of measurement uncertainty for cellulose based transformed board material in tensile testing.

Published in:

International Journal of Metrology & Quality Engineering, 2012, p. 15, doi. 10.1051/ijmqe/2012007

By:

Fank, S.;
Aydemir, B.

Publication type:

Article

A Novel Flow Model of Strain Hardening and Softening for Use in Tensile Testing of a Cylindrical Specimen at Room Temperature.

Published in:

Materials (1996-1944), 2021, v. 14, n. 17, p. 4876, doi. 10.3390/ma14174876

By:

Razali, Mohd Kaswandee;
Joun, Man Soo;
Chung, Wan Jin

Publication type:

Article

Experimental Method for Tensile Testing of Unidirectional Carbon Fibre Composites Using Improved Specimen Type and Data Analysis.

Published in:

Materials (1996-1944), 2021, v. 14, n. 14, p. 3939, doi. 10.3390/ma14143939

By:

Kumar, Rajnish;
Mikkelsen, Lars P.;
Lilholt, Hans;
Madsen, Bo

Publication type:

Article

Optimization of the Design of a Double-Cup Specimen Using the Finite Element Method for Testing Adhesive Bonds Under Tensile Loads.

Published in:

Journal of Adhesion Science & Technology, 2009, v. 23, n. 10/11, p. 1357, doi. 10.1163/156856109X432965

By:

Martinez, M. A.;
Muñoz, P.;
Abenojar, J.;
Velasco, F.;
del Real, J. C.

Publication type:

Article

E-LEARNING - A TOOL FOR EXPLOITATION OF TEXTILE TENSILE TESTING MACHINE.

Published in:

eLearning & Software for Education, 2020, v. 3, p. 309, doi. 10.12753/2066-026X-20-211

By:

FOGORASI, Magdalena Simona;
KOMJATI, Andrei;
BUCEVSCHI, Adina;
BARBU, Ionel

Publication type:

Article

In situ tensile testing in SEM of Al-Al<sub>4</sub>C<sub>3</sub> nanomaterials.

Published in:

Estonian Journal of Engineering, 2009, v. 15, n. 4, p. 247, doi. 10.3176/eng.2009.4.01

By:

Besterci, Michal;
Velgosová, Oksana;
Ivan, Jozef;
Hvizdoš, Pavol;
Kvaèkaj, Tibor;
Kulue, Priit

Publication type:

Article

Parallel Tensile Testing of Single-crystal Silicon Microstructures with Integrated Piezoresistive Strain Gauges.

Published in:

Sensors & Materials, 2018, v. 30, n. 9, Part 2, p. 2143, doi. 10.18494/SAM.2018.1946

By:

Akio Uesugi;
Yoshikazu Hirai;
Toshiyuki Tsuchiya;
Osamu Tabata

Publication type:

Article

In situ tensile testing of human aortas by time-resolved small-angle X-ray scattering.

Published in:

2005

By:

Schmid, F.;
Sommer, G.;
Rappolt, M.;
Schulze-Bauer, C. A. J.;
Regitnig, P.;
Holzapfel, G. A.;
Laggner, P.;
Amenitsch, H.

Publication type:

Other

Direct Tensile Testing of Free‐Standing Ultrathin Polymer Films on Liquid Surface at High Temperature.

Published in:

Small Methods, 2025, v. 9, n. 4, p. 1, doi. 10.1002/smtd.202401291

By:

Lee, Tae‐Ik;
Kim, Ji Hun;
Oh, Eun Sung;
Kim, Taek‐Soo

Publication type:

Article

Der Einfluss der Messunsicherheit in der Materialprüfung – Von der Messmittelauswahl zur Konformitätsaussage am Beispiel des Zugversuchs bei erhöhter Temperatur nach DIN EN ISO 6892-2:2018-09.

Published in:

Technisches Messen, 2024, v. 91, n. 7/8, p. 387, doi. 10.1515/teme-2024-0039

By:

Wieler, Stefan;
Frenz, Holger

Publication type:

Article

Advanced 3D-Printed Capstan Clamping System for Accurate Uniaxial Tensile Testing of Biological Soft Tissues.

Published in:

Applied Sciences (2076-3417), 2024, v. 14, n. 24, p. 11537, doi. 10.3390/app142411537

By:

Horvath, Paul;
Gläser, Franz;
Antipova, Veronica;
Klug, Corina;
Lin, Alvin C.;
Scholze, Mario;
Hammer, Niels

Publication type:

Article

In Situ CT Tensile Testing of an Additively Manufactured and Heat-Treated Metastable ß-Titanium Alloy (Ti-5Al-5Mo-5V-3Cr).

Published in:

Applied Sciences (2076-3417), 2021, v. 11, n. 21, p. 9875, doi. 10.3390/app11219875

By:

Hendl, Julius;
Daubner, Sina;
Marquardt, Axel;
Stepien, Lukas;
Lopez, Elena;
Brückner, Frank;
Leyens, Christoph

Publication type:

Article

Control System for a Tensile-Testing Device Using Low-Cost Hardware and Open-Source Software.

Published in:

Journal of Mechanical Engineering / Strojniški Vestnik, 2020, v. 66, n. 3, p. 155, doi. 10.5545/sv-jme.2019.6418

By:

Kranjec, Matej;
Korinšek, Jernej;
Ambrož, Miha;
Kunc, Robert

Publication type:

Article

In Situ Tensile Testing under High-Speed Optical Recording to Determine Hierarchical Damage Kinetics in Polymer Layers of Flax Fibre Elements.

Published in:

Polymers (20734360), 2023, v. 15, n. 13, p. 2794, doi. 10.3390/polym15132794

By:

Richely, Emmanuelle;
Beaugrand, Johnny;
Coret, Michel;
Binetruy, Christophe;
Ouagne, Pierre;
Bourmaud, Alain;
Guessasma, Sofiane

Publication type:

Article

Mechanical Characterization of the Human Abdominal Wall Using Uniaxial Tensile Testing.

Published in:

Bioengineering (Basel), 2023, v. 10, n. 10, p. 1213, doi. 10.3390/bioengineering10101213

By:

Kriener, Kyleigh;
Lala, Raushan;
Homes, Ryan Anthony Peter;
Finley, Hayley;
Sinclair, Kate;
Williams, Mason Kelley;
Midwinter, Mark John

Publication type:

Article

Strain hardening exponent and strain rate sensitivity exponent of dual-phase steels at quasi-static strain rates during tensile testing.

Published in:

Cogent Engineering, 2023, v. 10, n. 2, p. 1, doi. 10.1080/23311916.2023.2274548

By:

Khraisat, W.

Publication type:

Article

Influence of Ductility on Fracture in Tensile Testing of Cold Gas Sprayed Deposits.

Published in:

Journal of Thermal Spray Technology, 2023, v. 32, n. 6, p. 1780, doi. 10.1007/s11666-023-01598-y

By:

List, A.;
Huang, C.;
Wiehler, L.;
Gieseler, C.-P.;
Schulze, M.;
Gärtner, F.;
Klassen, T.

Publication type:

Article

Effects of Creep in Titanium at Room Temperature during Tensile and Profilometry‐Based Indentation Plastometry Testing.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 9, p. 1, doi. 10.1002/adem.202402645

By:

McKeown, Philip John;
Miller, James Rees;
Clyne, Trevor William

Publication type:

Article

FAIR and Structured Data: A Domain Ontology Aligned with Standard‐Compliant Tensile Testing.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 8, p. 1, doi. 10.1002/adem.202400138

By:

Schilling, Markus;
Bayerlein, Bernd;
von Hartrott, Philipp;
Waitelonis, Jörg;
Birkholz, Henk;
Dolabella Portella, Pedro;
Skrotzki, Birgit

Publication type:

Article

Uniaxial tensile testing standardization for the qualification of fiber reinforced plastics for fused filament fabrication.

Published in:

Mechanics of Advanced Materials & Structures, 2021, v. 28, n. 12, p. 1254, doi. 10.1080/15376494.2019.1660438

By:

Ferrell, William H.;
Clement, Jason;
TerMaath, Stephanie

Publication type:

Article

Microstructure Evolution in Super Duplex Stainless Steels Containing σ-Phase Investigated at Low-Temperature Using In Situ SEM/EBSD Tensile Testing.

Published in:

Metals (2075-4701), 2018, v. 8, n. 7, p. 478, doi. 10.3390/met8070478

By:

Paulsen, Christian Oen;
Broks, Runar Larsen;
Karlsen, Morten;
Hjelen, Jarle;
Westermann, Ida

Publication type:

Article

Interlaboratory proficiency testing of tensile and flexural testing for cellulose based transformed board material.

Published in:

International Journal of Metrology & Quality Engineering, 2012, p. 67, doi. 10.1051/ijmqe/2012018

By:

Aydemir, B.;
Fank, S.

Publication type:

Article

Interlaboratory proficiency testing of tensile and flexural testing for cellulose based transformed board material.

Published in:

International Journal of Metrology & Quality Engineering, 2012, v. 3, n. 2, p. 67, doi. 10.1051/ijmqe/2012018

By:

Aydemir, B.;
Fank, S.

Publication type:

Article