Works matching IS 14381656 AND DT 2020 AND VI 22 AND IP 4

Results: 49

Thermophysical Properties of Advanced Ni‐Based Superalloys in the Liquid State Measured on Board the International Space Station.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901228

By:

Mohr, Markus;
Wunderlich, Rainer;
Dong, Yue;
Furrer, David;
Fecht, Hans-Jörg

Publication type:

Article

Cephalopod‐Inspired Swimming Robot Using Dielectric Elastomer Synthetic Jet Actuator.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901130

By:

Tang, Chao;
Ma, Wentao;
Li, Bo;
Jin, Mingliang;
Chen, Hualing

Publication type:

Article

Thermophysical Properties of Advanced Ni‐Based Superalloys in the Liquid State Measured on Board the International Space Station.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901228

By:

Mohr, Markus;
Wunderlich, Rainer;
Dong, Yue;
Furrer, David;
Fecht, Hans-Jörg

Publication type:

Article

Cephalopod‐Inspired Swimming Robot Using Dielectric Elastomer Synthetic Jet Actuator.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901130

By:

Tang, Chao;
Ma, Wentao;
Li, Bo;
Jin, Mingliang;
Chen, Hualing

Publication type:

Article

Tough, Additively Manufactured Structures Fabricated with Dual‐Thermoplastic Filaments.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901184

By:

Hart, Kevin R.;
Dunn, Ryan M.;
Wetzel, Eric D.

Publication type:

Article

Thermophysical Properties of Advanced Ni‐Based Superalloys in the Liquid State Measured on Board the International Space Station.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901228

By:

Mohr, Markus;
Wunderlich, Rainer;
Dong, Yue;
Furrer, David;
Fecht, Hans-Jörg

Publication type:

Article

Masthead.

Published in:: Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.202070015
Publication type:: Article

Cephalopod‐Inspired Swimming Robot Using Dielectric Elastomer Synthetic Jet Actuator.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901130

By:

Tang, Chao;
Ma, Wentao;
Li, Bo;
Jin, Mingliang;
Chen, Hualing

Publication type:

Article

Tough, Additively Manufactured Structures Fabricated with Dual‐Thermoplastic Filaments.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901184

By:

Hart, Kevin R.;
Dunn, Ryan M.;
Wetzel, Eric D.

Publication type:

Article

Fabrication of Si2N2O Ceramic Foam by Combination of Direct Ink Writing and Biological Foaming Techniques.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901541

By:

Jin, Haize;
Yang, Zhihua;
Li, Hailiang;
Jia, Dechang;
Zhou, Yu

Publication type:

Article

Engineering of Droplet Charges in Microfluidic Chips.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901521

By:

He, Rongxiang;
Ruan, Meilin;
Qi, Yuyang;
Liu, Hongni;
Zhang, Zhengtao;
Chen, Chaohui;
Chao, Yiping;
Liu, Yumin;
Chen, Yong

Publication type:

Article

Influence of Strain Amplitude on the Microstructural Evolution and Flow Properties of Copper Processed by Multidirectional Forging.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901510

By:

Flausino, Paula Cibely Alves;
Nassif, Maria Elisa Landim;
Bubani, Franco de Castro;
Pereira, Pedro Henrique R.;
Aguilar, Maria Teresa Paulino;
Cetlin, Paulo Roberto

Publication type:

Article

Low‐Temperature Polysilicon Oxide Thin‐Film Transistors with Coplanar Structure Using Six Photomask Steps Demonstrating High Inverter Gain of 264 V V−1.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901497

By:

Jeong, Duk Young;
Chang, Yeoungjin;
Yoon, Won Gyeong;
Do, Youngbin;
Jang, Jin

Publication type:

Article

Characterization of Microstructures Formed during Nonequilibrium Thermal Cycles in a TiAl Alloy Fabricated by Direct Metal Deposition.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901444

By:

Wu, Yu;
Cheng, Xu;
Zhang, Shuquan;
Tian, Xiangjun;
He, Bei;
Wang, Huaming

Publication type:

Article

Interfacial Nanostructure of 2D Ti3C2/Graphene Quantum Dots Hybrid Multicoating for Ultralow Wear.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901369

By:

Yin, Xuan;
Jin, Jie;
Chen, Xinchun;
Rosenkranz, Andreas;
Luo, Jianbin

Publication type:

Article

Effects of Dy Addition on the Mechanical and Degradation Properties of Mg–2Zn–0.5Zr Alloy.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901360

By:

Li, Huan;
Wen, Jiuba;
He, Junguang;
Shi, Huina;
Liu, Ya

Publication type:

Article

Analysis of the Combined Strengthening Effect of Solute Atoms and Precipitates on Creep of Aluminum Alloys.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901355

By:

Fernández, Ricardo;
Bokuchava, Gizo;
Toda-Caraballo, Isaac;
Bruno, Giovanni;
Turchenko, Vitalii;
Gorshkova, Yulia;
González-Doncel, Gaspar

Publication type:

Article

Inkjet Printing Controllable Polydopamine Nanoparticle Line Array for Transparent and Flexible Touch‐Sensing Application.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901351

By:

Liu, Liang;
Pei, Yunheng;
Ma, Siyuan;
Sun, Xiaoze;
Singler, Timothy J.

Publication type:

Article

Microstructural Characterization of Mechanically Alloyed FeCoNiMnV High Entropy Alloy Consolidated by Spark Plasma Sintering.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901311

By:

Alijani, Fatemeh;
Reihanian, Mohsen;
Gheisari, Khalil;
Yuasa, Motohiro;
Miyamoto, Hiroyuki

Publication type:

Article

Enhanced Microwave Absorption: The Composite of Fe3O4 Flakes and Reduced Graphene Oxide with Improved Interfacial Polarization.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901299

By:

Jiao, Shangqing;
Wu, Mingzai;
Yu, Xinxin;
Zhang, Hui

Publication type:

Article

Synthesis of Hybrid Nanocrystalline Alloys by Mechanical Bonding through High‐Pressure Torsion.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901289

By:

Han, Jae-Kyung;
Herndon, Taylor;
Jang, Jae-il;
Langdon, Terence G.;
Kawasaki, Megumi

Publication type:

Article

Unveiling 3D Morphology of Multiscale Micro‐Nanosilver Sintering for Advanced Electronics Manufacturing by Ptychographic X‐ray Nanotomography.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901250

By:

Lin, Yu-Chung;
Liu, Xiaoyang;
Chou, Kang Wei;
Tsai, Esther H. R.;
Zhao, Chonghang;
Holler, Mirko;
Diaz, Ana;
Petrash, Stanislas;
Chen-Wiegart, Yu-chen Karen

Publication type:

Article

Deformation Behavior and Dynamic Recrystallization of Ti–22Al–25Nb Alloy at 750–990 °C.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901231

By:

Huang, Shuhui;
Shao, Bin;
Xu, Wenchen;
Shan, Debin;
Guo, Bin;
Zong, Yingying

Publication type:

Article

Thermophysical Properties of Advanced Ni‐Based Superalloys in the Liquid State Measured on Board the International Space Station.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901228

By:

Mohr, Markus;
Wunderlich, Rainer;
Dong, Yue;
Furrer, David;
Fecht, Hans-Jörg

Publication type:

Article

Low‐Friction, Superhydrophobic, and Shape‐Memory Vulcanized Rubber Microspiked Structures.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901226

By:

Uemura, Shun;
Matsuo, Yasutaka;
Okamatsu, Takahiro;
Arita, Toshihiko;
Shimomura, Masatsugu;
Hirai, Yuji

Publication type:

Article

New‐Type Oxidation Barrier Coatings for Titanium Alloys.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901224

By:

Smokovych, Iryna;
Scheffler, Michael;
Li, Shibo;
Yao, Boxiang

Publication type:

Article

Toward High‐Throughput Texturing of Polymer Foils for Enhanced Light Trapping in Flexible Perovskite Solar Cells Using Roll‐to‐Roll Hot Embossing.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901217

By:

Soldera, Marcos;
Wang, Qiong;
Soldera, Flavio;
Lang, Valentin;
Abate, Antonio;
Lasagni, Andrés Fabián

Publication type:

Article

Lithography and Etching‐Free Microfabrication of Silicon Carbide on Insulator Using Direct UV Laser Ablation.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901173

By:

Nguyen, Tuan‐Khoa;
Phan, Hoang-Phuong;
Dowling, Karen M.;
Yalamarthy, Ananth Saran;
Dinh, Toan;
Balakrishnan, Vivekananthan;
Liu, Tanya;
Chapin, Caitlin A.;
Truong, Quoc-Dung;
Dau, Van Thanh;
Goodson, Kenneth E.;
Senesky, Debbie G.;
Dao, Dzung Viet;
Nguyen, Nam-Trung

Publication type:

Article

Advanced Deep Learning‐Based 3D Microstructural Characterization of Multiphase Metal Matrix Composites.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901197

By:

Evsevleev, Sergei;
Paciornik, Sidnei;
Bruno, Giovanni

Publication type:

Article

Impact of Triple Roll Milling Processing Parameters on Fluidic/Rheological and Electrical Properties of Aqueous Graphene Ink.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901187

By:

Kumar, Sandeep;
Kumar, Pramod;
Bhatt, Kapil;
Shrivastva, Shilpi;
Kumar, Amit;
Singh, Ravinder;
Punia, Rajesh;
Tripathi, Chandra Charu

Publication type:

Article

Tough, Additively Manufactured Structures Fabricated with Dual‐Thermoplastic Filaments.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901184

By:

Hart, Kevin R.;
Dunn, Ryan M.;
Wetzel, Eric D.

Publication type:

Article

Carbon Nanotube‐Reinforced Aluminum Matrix Composites.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901176

By:

Mohammed, Sohail M. A. K.;
Chen, Daolun L.

Publication type:

Article

The Role of Sm in Precipitates, Grain Sizes,and Tensile Properties of As‐Cast and As‐Extruded AZ31–0.3La Alloys.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901215

By:

Fu, Li;
Hu, Wenxin;
Le, Qichi;
Jia, Zheng;
Lu, Lin

Publication type:

Article

Changes in the Diffusion Coefficient of Rhenium in a New Type of Nickel‐Based Single‐Crystal Superalloy during Homogenization.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901151

By:

Li, Yiling;
Jia, Zhihong;
Tang, Wei;
Liang, Xiangfeng;
Xu, Weitai;
Zhao, Yutao

Publication type:

Article

A Review of Research on Seismic Metamaterials.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901148

By:

Mu, Di;
Shu, Haisheng;
Zhao, Lei;
An, Shuowei

Publication type:

Article

Enhancing the Elastocaloric Cooling Stability of NiFeGa Alloys via Introducing Pores.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901140

By:

Imran, Muhammad;
Zhang, Xuexi;
Qian, Mingfang;
Geng, Lin

Publication type:

Article

Cephalopod‐Inspired Swimming Robot Using Dielectric Elastomer Synthetic Jet Actuator.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901130

By:

Tang, Chao;
Ma, Wentao;
Li, Bo;
Jin, Mingliang;
Chen, Hualing

Publication type:

Article

A Comparative Study on Microstructure and Mechanical Properties of Ti‐43/46Al–5Nb–0.1B Alloys Modified by Mo.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901075

By:

Yang, Yong;
Fang, Hongze;
Chen, Ruirun;
Su, Yanqing;
Ding, Hongsheng;
Guo, Jingjie

Publication type:

Article

Role of Modifying Photoanodes by Organic Titanium on Charge Collection Efficiency Enhancement in Dye‐Sensitized Solar Cells.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901071

By:

Cao, Dapeng;
Yin, Huiming;
Yu, Xiaohui;
Zhang, Jingbo;
Jiao, Yunfei;
Zheng, Wei;
Mi, Baoxiu;
Gao, Zhiqiang

Publication type:

Article

Recent Progress on 3D‐Printed Polylactic Acid and Its Applications in Bone Repair.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901065

By:

Chen, Xibao;
Chen, Gang;
Wang, Gang;
Zhu, Peizhi;
Gao, Chunxia

Publication type:

Article

Synthesis of Porous Ni/SiC(O)‐Based Nanocomposites: Effect of Nickel Acetylacetonate and Poly(Ethylene Glycol) Methacrylate Modification on Specific Surface Area and Porosity.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901036

By:

Kaur, Sarabjeet;
Mônego, Guilherme;
Rezwan, Kurosch;
Wilhelm, Michaela

Publication type:

Article

Influence of Al Addition Strategy on the Microstructure of a Low‐Cr Oxide Dispersion‐Strengthened Ferritic Steel.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201900879

By:

Xu, Shuai;
Zhou, Zhangjian;
Long, Fei;
Jia, Haodong;
Guo, Ning;
Sun, Yongduo;
Yao, Zhongwen;
Daymond, Mark R.

Publication type:

Article

Microstructure and Microhardness Evolution in Pure Molybdenum Processed by High‐Pressure Torsion.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901022

By:

Wang, Xue;
Li, Ping;
Huang, Yi;
Gao, Nong;
Langdon, Terence G.

Publication type:

Article

Work Function Tunability of Graphene with Thermally Evaporated Rhenium Heptoxide for Transparent Electrode Applications.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201900955

By:

Krukowski, Pawel;
Kowalczyk, Dorota Anna;
Piskorski, Michal;
Dabrowski, Pawel;
Rogala, Maciej;
Caban, Piotr;
Ciepielewski, Pawel;
Jung, Jaroslaw;
Baranowski, Jacek M.;
Ulanski, Jacek;
Klusek, Zbigniew

Publication type:

Article

On the Relation of Amorphous Calcium Carbonate and the Macromechanical Properties of Sea Urchin Spines.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201900922

By:

Lauer, Christoph;
Haußmann, Sebastian;
Schmidt, Patrick;
Fischer, Carolin;
Rapp, Doreen;
Berthold, Christoph;
Nickel, Klaus G.

Publication type:

Article

Tensile Mechanical Behaviors of High Loading of Carbon Nanotube/Epoxy Composites via Experimental and Finite Element Analysis.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201900895

By:

Shen, Lulu;
Liu, Ling;
Wu, Zhanjun

Publication type:

Article

Stacking Faults and Growth Twins in Long‐Period Stacking‐Ordered Structures in Mg–Co–Y Alloys.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201901029

By:

Jin, Qianqian;
Shao, Xiaohong;
Peng, Zhenzhen;
Zhou, Yangtao;
Zhang, Bo;
Zheng, Shijian;
Ma, Xiuliang

Publication type:

Article

Automated Fabrication of Elastomeric Prepregs for Soft Robotics Applications.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201900854

By:

Wienzek, Tristan;
Seibel, Arthur

Publication type:

Article

Recent Development of TiNi‐Based Shape Memory Alloys with High Cycle Stability and High Transformation Temperature.

Published in:

Advanced Engineering Materials, 2020, v. 22, n. 4, p. 1, doi. 10.1002/adem.201900496

By:

Tong, Yunxiang;
Shuitcev, Aleksandr;
Zheng, Yufeng

Publication type:

Article