Found: 49
Select item for more details and to access through your institution.
CERAMIC POROUS PREFORMS MANUFACTURED FROM WASTE MATERIALS.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 283, doi. 10.24425/amm.2022.137503
- By:
- Publication type:
- Article
NUMERICAL-EXPERIMENTAL RESEARCH ON SOME PARAMETERS OF HIP AND KNEE ENDOPROSTHESES, DETERMINING VALUE AND FORM OF CONTACT STRESS BETWEEN THEIR ELEMENTS.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 277, doi. 10.24425/amm.2022.137502
- By:
- Publication type:
- Article
RECLAMATION AND REUTILIZATION OF INCINERATOR ASH IN ARTIFICIAL LIGHTWEIGHT AGGREGATE.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 269, doi. 10.24425/amm.2022.137501
- By:
- Publication type:
- Article
CORROSION REACTIVITY IN THE PRE-CLINICAL STUDY OF 316L AND 321 STAINLESS STEEL FOR DENTISTRY APPLICATIONS.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 371, doi. 10.24425/amm.2022.137767
- By:
- Publication type:
- Article
HYDROTHERMAL SYNTHESIS, IMPEDANCE AND OPTICAL PROPERTIES OF TM-DOPED SRBI<sub>2</sub>NB<sub>2</sub>O<sub>9</sub> CERAMICS.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 45, doi. 10.24425/amm.2022.137470
- By:
- Publication type:
- Article
INVESTIGATIONS ON MECHANICAL PROPERTIES OF BIO-WASTE MICRO PARTICLES REINFORCED PHENOL FORMALDEHYDE COMPOSITES.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 377, doi. 10.24425/amm.2022.137768
- By:
- Publication type:
- Article
EFFECT OF MACHINING PROCESS PARAMETERS AND NUMBER OF PASS ON COMPACTION BEHAVIOUR OF COMMERCIALLY PURE ALUMINIUM CHIPS CONSOLIDATED BY EQUAL CHANNEL ANGULAR PRESSING (ECAP) USING RESPONSE SURFACE METHODOLOGY.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 357, doi. 10.24425/amm.2022.137766
- By:
- Publication type:
- Article
ATTEMPTS TO MODIFY AUSTENITIC STEEL WITH CARBON NANOTUBES.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 349, doi. 10.24425/amm.2022.137765
- By:
- Publication type:
- Article
CHANGES IN THERMAL PROPERTIES OF PRINTOUTS MADE OF PETG AND PLA DOPED WITH COPPER AFTER ELECTROCORROSIVE AGEING PROCESS.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 333, doi. 10.24425/amm.2022.137763
- By:
- Publication type:
- Article
INFLUENCE OF COPPER POWDER MORPHOLOGY ON THE MICROSTRUCTURE AND PROPERTIES OF COPPER MATRIX BULK COMPOSITES REINFORCED WITH NI-DOPED GRAPHENE.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 341, doi. 10.24425/amm.2022.137764
- By:
- Publication type:
- Article
ANALYSIS OF THE INFLUENCE OF THE MOULD TEMPERATURE IN THE WELD LINE AREAS ON STRENGTH OF THE INJECTION MOULDINGS.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 325, doi. 10.24425/amm.2022.137762
- By:
- Publication type:
- Article
PHASE ANALYSIS OF DIFFERENT LIQUID RATIO ON METAKAOLIN/DOLOMITE GEOPOLYMER.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 247, doi. 10.24425/amm.2022.137497
- By:
- Publication type:
- Article
MECHANICAL BEHAVIOR OF NITROCARBURISED AUSTENITIC STEEL COATED WITH N-DLC BY MEANS OF DC AND PULSED GLOW DISCHARGE.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 317, doi. 10.24425/amm.2022.137761
- By:
- Publication type:
- Article
SYNTHESIS OF MAGNESIUM ALUMINATE SPINEL DOPED TIO<sub>2</sub> FROM MAGNESITE WASTE.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 311, doi. 10.24425/amm.2022.137757
- By:
- Publication type:
- Article
THE EFFECT OF 0.2% ADDITION OF Mg, Co AND Ce ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF 1XXX SERIES ALUMINIUM ALLOY CASTINGS DESIGNED FOR OVERHEAD TRANSMISSION LINES.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 303, doi. 10.24425/amm.2022.137756
- By:
- Publication type:
- Article
EFFECT OF TIC REINFORCEMENT ON WEAR RESISTANCE OF MAGNESIUM MATRIX COMPOSITE BY FSP.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 293, doi. 10.24425/amm.2022.137505
- By:
- Publication type:
- Article
INFLUENCE OF INITIAL CHARGE TEMPERATURE AND FURNACE EXPLOITATION ON STEEL LOSS.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 289, doi. 10.24425/amm.2022.137504
- By:
- Publication type:
- Article
STRUCTURAL AND PHYSICAL CHARACTERIZATION OF NEW TI-BASED ALLOYS.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 255, doi. 10.24425/amm.2022.137499
- By:
- Publication type:
- Article
MICROSTRUCTURAL STUDIES OF AG/TIO<sub>2</sub> THIN FILM; EFFECT OF ANNEALING TEMPERATURE.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 241, doi. 10.24425/amm.2022.137496
- By:
- Publication type:
- Article
GOLD RECOVERY FROM CYANIDATION TAILINGS USING FLOTATION PROCESS.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 37, doi. 10.24425/amm.2022.137469
- By:
- Publication type:
- Article
REVIEW ON MECHANICAL PROPERTIES OF METAKAOLIN GEOPOLYMER CONCRETE BY INCLUSION OF STEEL FIBERS.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 261, doi. 10.24425/amm.2022.137500
- By:
- Publication type:
- Article
MECHANICAL EFFECTS ON DIFFERENT SOLID TO LIQUID RATIO OF GEOPOLYMER FILLER IN EPOXY RESIN.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 215, doi. 10.24425/amm.2022.137492
- By:
- Publication type:
- Article
STRUCTURE OF 22Cr25NIWCoCu AUSTENITIC STAINLESS STEEL AFTER AGEING.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 175, doi. 10.24425/amm.2022.137486
- By:
- Publication type:
- Article
FORECASTING THE PROPERTIES OF HEAT-RESISTANT NICKEL ALLOYS EQUALAXIAL CRYSTALLIZATION.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 51, doi. 10.24425/amm.2022.137471
- By:
- Publication type:
- Article
SURFACE INTEGRITY EVALUATION ON ALUMINIUM-EPOXY COMPOSITE IN MACHINING USING TAGUCHI METHOD.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 233, doi. 10.24425/amm.2022.137495
- By:
- Publication type:
- Article
THE INVESTIGATION OF GROUND GRANULATED BLAST FURNACE SLAG GEOPOLYMER AT HIGH TEMPERATURE BY USING ELECTRON BACKSCATTER DIFFRACTION ANALYSIS.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 227, doi. 10.24425/amm.2022.137494
- By:
- Publication type:
- Article
THERMAL INSULATION AND MECHANICAL PROPERTIES IN THE PRESENCE OF GLAS BUBBLE IN FLY ASH GEOPOLYMER PASTE.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 221, doi. 10.24425/amm.2022.137493
- By:
- Publication type:
- Article
ASSESSMENT ON THE PHYSICAL, MECHANICAL PROPERTIES AND LEACHING BEHAVIOUR OF FIRED CLAY BRICK INCORPORATED WITH STEEL MILL SLUDGE.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 209, doi. 10.24425/amm.2022.137491
- By:
- Publication type:
- Article
EFFECT OF RARE EARTH CERIUM ADDITION ON OXIDATION BEHAVIOR OF Co-Al-W ALLOYS AT 800°C.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 203, doi. 10.24425/amm.2022.137490
- By:
- Publication type:
- Article
EFFECT OF SILICA FUME AND ALUMINA ADDITION ON THE MECHANICAL AND MICROSTRUCTURE OF FLY ASH GEOPOLYMER CONCRETE.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 197, doi. 10.24425/amm.2022.137489
- By:
- Publication type:
- Article
NUMERICAL EVALUATION OF THE IMPACT OF RISER GEOMETRY ON THE SHRINKAGE DEFECTS FORMATION IN THE SOLIDIFYING CASTING.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 181, doi. 10.24425/amm.2022.137487
- By:
- Publication type:
- Article
RECYCLING OF PET BOTTLES INTO DIFFERENT TYPES OF BUILDING MATERIALS: A REVIEW.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 189, doi. 10.24425/amm.2022.137488
- By:
- Publication type:
- Article
NUMERICAL INVESTIGATION ON THE GAS FIELD GENERATED BY HIGH PRESSURE GAS ATOMIZER FOCUSED ON PHYSICAL MECHANISMS OF GAS RECIRCULATION AND WAKE CLOSURE PHENOMENON.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 167, doi. 10.24425/amm.2022.137485
- By:
- Publication type:
- Article
POROSITY QUANTIFICATION OF ADDITIVE MANUFACTURED TI6AL4V AND COCRW ALLOYS PRODUCED BY L-PBF.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 83, doi. 10.24425/amm.2022.137475
- By:
- Publication type:
- Article
ON THE ESTIMATION OF FATIGUE CRACK INITIATION LIFE OF H62 BRASS.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 31, doi. 10.24425/amm.2022.137468
- By:
- Publication type:
- Article
SURFACE EFFECT ON ELECTRONIC, MAGNETIC AND OPTICAL PROPERTIES OF PTCOBI HALF-HEUSLER: A DFT STUDY.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 155, doi. 10.24425/amm.2022.137484
- By:
- Publication type:
- Article
THE EFFECT OF BN OR SIC ADDITION ON PEO PROPERTIES OF COATINGS FORMED ON AZ91 MAGNESIUM ALLOY.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 147, doi. 10.24425/amm.2022.137483
- By:
- Publication type:
- Article
ENHANCING THE STRENGTH OF AL/MG DISSIMILAR FRICTION STIR LAP WELDED JOINT BY ZN FILLER ADDITION COMBINED WITH AN APPROPRIATE HEAT INPUT.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 137, doi. 10.24425/amm.2022.137482
- By:
- Publication type:
- Article
EFFECT OF CRYOGENIC TREATMENT ON WEAR RESISTANCE AND MICROSTRUCTURE OF 42CRMO STEEL.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 127, doi. 10.24425/amm.2022.137481
- By:
- Publication type:
- Article
THE INFLUENCE OF IRON AND ALUMINIUM POWDER PRESSING ON THE COURSE OF SHRINKAGE AND PROPERTIES OF THE FE40AL PHASE OBTAINED BY REACTION SINTERING.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 121, doi. 10.24425/amm.2022.137480
- By:
- Publication type:
- Article
MICROSTRUCTURE EVOLUTION AND WEAR RESISTANCE OF BORON-BEARING HIGH SPEED STEEL ROLL.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 113, doi. 10.24425/amm.2022.137479
- By:
- Publication type:
- Article
THE INFLUENCE OF ALUMINUM CONTENT ON THE POROSITY, MICROSTRUCTURE, AND MECHANICAL PROPERTIES OF POWDER METALLURGY STEELS.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 105, doi. 10.24425/amm.2022.137478
- By:
- Publication type:
- Article
THE ADJUSTMENT OF THE TUNDISH WATER MODEL OF CONTINUOUS CASTING.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 97, doi. 10.24425/amm.2022.137477
- By:
- Publication type:
- Article
MICROSTRUCTURE AND MECHANICAL PROPERTIES OF FRICTION STIR LAP WELDED DISSIMILAR AL/TI ALLOYS BY ULTRASONIC ASSISTANCE.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 91, doi. 10.24425/amm.2022.137476
- By:
- Publication type:
- Article
INFLUENCE OF INTERNAL CRACKING ON CARBIDE PRECIPITATION IN CONTINUOUS CASTING BLOOM INDUCED BY SOFT REDUCTION TECHNOLOGY AND THE RESULTING SEGREGATED BAND IN HOT-ROLLED WIRE RODS.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 73, doi. 10.24425/amm.2022.137474
- By:
- Publication type:
- Article
COMPARISONS BETWEEN 2D AND 3D MPFEM SIMULATIONS IN MODELING UNIAXIAL HIGH VELOCITY COMPACTION BEHAVIORS OF TI-6AL-4V POWDER.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 57, doi. 10.24425/amm.2022.137472
- By:
- Publication type:
- Article
SYNTHESIS OF ANALCIME ZEOLITE USING AL AND SI FROM WASTE RESOURCES FOR THE REMOVAL OF PB/CD IONS FROM AQUEOUS SOLUTION.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 67, doi. 10.24425/amm.2022.137473
- By:
- Publication type:
- Article
MICROSTRUCTURE AND PROPERTIES OF TIG SURFACING Co-BASED ALLOY ON UMCO50 PROCESS BURNER.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 17, doi. 10.24425/amm.2022.137467
- By:
- Publication type:
- Article
THE INFLUENCE OF AG<sub>2</sub>TE ADDITION ON THERMOELECTRIC PROPERTIES OF BISMUTH TELLURIDE.
- Published in:
- Archives of Metallurgy & Materials, 2022, v. 67, n. 1, p. 5, doi. 10.24425/amm.2022.137466
- By:
- Publication type:
- Article