Found: 57
Select item for more details and to access through your institution.
A Low‐Binder‐Content Ink System for 3D Printing High‐Density and Small Feature Size 316L Stainless Steel Parts.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300558
- By:
- Publication type:
- Article
Recent Advances of LATP and Their NASICON Structure as a Solid‐State Electrolyte for Lithium‐Ion Batteries.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300566
- By:
- Publication type:
- Article
Stabilizing Antiferroelectric‐Like Aluminum‐Doped Hafnium Oxide for Energy Storage Capacitors.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300443
- By:
- Publication type:
- Article
Wear of a Fe2.5Ni2.5CrAl Multiprincipal Element Alloy: A Combined Experimental and Molecular Dynamics Study.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300557
- By:
- Publication type:
- Article
3D Printing of Ceramics with Controllable Green‐Body Configuration Assisted by the Polyvinyl Alcohol‐Based Physical Gels.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300445
- By:
- Publication type:
- Article
Hybrid Hydrogel‐Magnet Actuators with pH‐Responsive Hydrogels for Gastrointestinal Microrobots.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202301060
- By:
- Publication type:
- Article
Masthead.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202370069
- Publication type:
- Article
Development of Magnetocaloric Microstructures from Equiatomic Iron–Rhodium Nanoparticles through Laser Sintering.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300245
- By:
- Publication type:
- Article
Hybrid Hydrogel‐Magnet Actuators with pH‐Responsive Hydrogels for Gastrointestinal Microrobots.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202301060
- By:
- Publication type:
- Article
Exploring the Potential of Wire Fed Direct Energy Deposition of Aluminum–Boron Nitride Nanotube Composite: Microstructural Evolution and Mechanical Properties.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300770
- By:
- Publication type:
- Article
Multiphysics Simulation and Experimental Investigation of the Densification of Metals by Spark Plasma Sintering.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300764
- By:
- Publication type:
- Article
Passivation Behavior of Water‐Quenched and Heat‐Treated Ti–6Al–4V in Hank's Solution.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300754
- By:
- Publication type:
- Article
Reusable Shape‐Memory Photonic Crystal Paper for Pin‐Printing and High‐Resolution Press Printing.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300753
- By:
- Publication type:
- Article
Ladderlike Polyphenylsesquioxane‐Doped Cellulose Insulation Paper with Upgraded Mechanical Strength.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300738
- By:
- Publication type:
- Article
Helical Microfilament‐Electrode‐Based Semi‐Implantable Biosensors for In Vivo Electrochemical Detection.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300735
- By:
- Publication type:
- Article
Inkjet‐Printed Metal Oxide/PEDOT:PSS‐Based Diodes and Rectifiers for Wireless Power Transfer.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300733
- By:
- Publication type:
- Article
Greening Industrially Applied Toxic Cadmium Plating with γ‐Ni<sub>2</sub>Zn<sub>11</sub> Alloy in Deep Eutectic Solvents: Promising Electroplating Efficiency and Chemical Corrosion Resistance.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300731
- By:
- Publication type:
- Article
Numerical Analysis of Cross‐Sectional Effects During the Magnetic Pulse Disassembly of Laminate Structures.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300728
- By:
- Publication type:
- Article
Interface Oxygen Vacancy‐Enhanced Co<sub>3</sub>O<sub>4</sub>/WO<sub>3</sub> Nanorod Heterojunction for Sub‐ppm Level Detection of NO<sub>x</sub>.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300727
- By:
- Publication type:
- Article
Scalable Strategy for High‐Performance Hybrid Supercapacitor and Battery‐Type Electrode Materials.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300725
- By:
- Publication type:
- Article
Copolymerization of Phase Change Materials with Water Resistance Poly(Acrylamide‐Co‐Polyacrylic Acid) Copolymer Encapsulation: Photothermal Conversion and Storage Performance Under Solar Conditions.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300720
- By:
- Publication type:
- Article
Abrasion‐Resistant and Enhanced Super‐Slippery Flush Toilets Fabricated by a Selective Laser Sintering 3D Printing Technology.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300703
- By:
- Publication type:
- Article
Ultrastrong High‐Ductility Ni<sub>35</sub>Co<sub>35</sub>Fe<sub>10</sub>Al<sub>10</sub>Ti<sub>8</sub>B<sub>2</sub> High‐Entropy Alloy Strengthened with Super‐High Concentration L1<sub>2</sub> Precipitates.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300689
- By:
- Publication type:
- Article
Novel Aerosol‐Based Approach toward Mesoporous Silica Nanoparticles.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300679
- By:
- Publication type:
- Article
Precipitation of Al<sub>3</sub>Zr Dispersoids under Various Homogenization and Its Effect on Recrystallization in 2198 Al–Cu–Li Alloy.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300673
- By:
- Publication type:
- Article
Enhanced Cooling Performance of Three‐Dimensional Printed Heat Sink via Solution‐Processed Layer‐by‐Layer CNT Coatings.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300669
- By:
- Publication type:
- Article
Piezoelectric Glass‐Fiber‐Reinforced Polymer Sensor for Structural Health Monitoring and Stiffness Sensing.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300638
- By:
- Publication type:
- Article
Effect of Nano‐TiC Ceramic Particles on Microstructures and Properties of High‐Cr Steel under Different Heat‐Treatment Conditions.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300631
- By:
- Publication type:
- Article
Effect of Interlayer‐Compressed Argon Gas Active Cooling on Microstructure and Properties of Ti–6Al–4V Fabricated by WAAM.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300618
- By:
- Publication type:
- Article
Dry Sliding Wear Properties of Annealed Carbon Steels Matrix Composites by Nanosized TiC‐TiB<sub>2</sub> Particles.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300588
- By:
- Publication type:
- Article
Novel Spinel Multicomponent High‐Entropy Oxide as Anode for Lithium‐Ion Batteries with Excellent Electrochemical Performance.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300585
- By:
- Publication type:
- Article
Stimuli–Responsive Mechanoadaptive Elastomeric Composite Materials: Challenges, Opportunities, and New Approaches.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300584
- By:
- Publication type:
- Article
Superhydrophobic and Anti‐Icing Surface by Femtosecond Laser Direct Writing.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300575
- By:
- Publication type:
- Article
Research Progress of Laminated Composite Ceramic Cutting Tools.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300564
- By:
- Publication type:
- Article
1T‐WS<sub>2</sub> Nanosheet‐Modified Biomass Carbon as Sulfur Host for High‐Performance Lithium–Sulfur Batteries.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300542
- By:
- Publication type:
- Article
Quantum Inspired Broadband Photonic Absorber: Potential Application as Solar Sail along with Mobility Analysis.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300438
- By:
- Publication type:
- Article
Excellent Mechanical Properties and Energy Absorption of Hexagonal‐Body‐Centered Lattice Structure Fabricated by Selective Laser Melting.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300431
- By:
- Publication type:
- Article
Mesh Layer Jamming to Cover and Secure Curved Surfaces without Wrinkles.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300513
- By:
- Publication type:
- Article
Study on the Corrosion and High‐Temperature‐Resistant Coating for In Situ Crosslinking Reaction Catalyzed by a Special "Egg Inlaid Egg Tray" Structure.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300519
- By:
- Publication type:
- Article
Temperature‐Independent Conductive Ceramic for High‐Temperature Strain‐Sensing Applications.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300516
- By:
- Publication type:
- Article
Electrical and Mechanical Behavior of Aerosol Jet–Printed Gold on Alumina Substrate for High‐Temperature Applications.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300439
- By:
- Publication type:
- Article
Dough‐Like Aramid Nanofiber Putty‐Assisted Design of Free‐Standing Liquid Metal‐Based Films for Ultrahigh Electromagnetic Interference Shielding.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300512
- By:
- Publication type:
- Article
Anisotropic Pressure Sensors Fabricated by 3D Printing‐Aligned Carbon Nanotube Composites.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300510
- By:
- Publication type:
- Article
Fatigue Resistance of an Anodized and Hardanodized 6082 Aluminum Alloy Depending on the Coating Thickness in the High Cycle Regime.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300394
- By:
- Publication type:
- Article
Photothermal Fabric Based on In Situ Growth of CuO@Cu Fractal Dendrite Fiber for Personal Thermal Management.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300386
- By:
- Publication type:
- Article
Additive Manufacturing of Composite Foam Metamaterial Springs for Vibration Isolation.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300356
- By:
- Publication type:
- Article
Application of Biodegradable Materials in Oil‐Spill Cleanup: Recent Advances and Future Perspectives.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300315
- By:
- Publication type:
- Article
Development of Magnetocaloric Microstructures from Equiatomic Iron–Rhodium Nanoparticles through Laser Sintering.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300245
- By:
- Publication type:
- Article
Materials and Manufacturing for Ankle–Foot Orthoses: A Review.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300238
- By:
- Publication type:
- Article
Simulation of Binder Infiltration in Additive Manufacturing of Sand Molds.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300212
- By:
- Publication type:
- Article