Found: 1477
Select item for more details and to access through your institution.
Influences of Zr and V Addition on the Crystal Chemistry of θ-Al 13 Fe 4 and the Grain Refinement of α-Al in an Al-4Fe Alloy Based on Experiment and First-Principle Calculations.
- Published in:
- Crystals (2073-4352), 2024, v. 14, n. 10, p. 879, doi. 10.3390/cryst14100879
- By:
- Publication type:
- Article
Microstructural Response of Highly Porous Sintered Nano-silver Particle Die Attachments to Thermomechanical Cycling.
- Published in:
- Journal of Electronic Materials, 2024, v. 53, n. 3, p. 1374, doi. 10.1007/s11664-023-10870-4
- By:
- Publication type:
- Article
Influence of Sb on the Performance and Interfacial Behavior of SnBiAg-xSb/Cu Solder Joints.
- Published in:
- Journal of Electronic Materials, 2023, v. 52, n. 12, p. 7979, doi. 10.1007/s11664-023-10719-w
- By:
- Publication type:
- Article
Effect of ECAP Processing on Hardness, Electrical Conductivity, and Precipitation Kinetics of the Cu-0.81Cr-0.07Zr Alloy.
- Published in:
- Journal of Electronic Materials, 2021, v. 50, n. 11, p. 6171, doi. 10.1007/s11664-021-09144-8
- By:
- Publication type:
- Article
Enhancement of the Thermoelectric Properties of BiCuSeO via In Doping and Powder Size Controlling.
- Published in:
- Journal of Electronic Materials, 2020, v. 49, n. 1, p. 611, doi. 10.1007/s11664-019-07720-7
- By:
- Publication type:
- Article
Strength and Plasticity Synergistic Enhancement Mechanism for AZ31B Magnesium Alloy Using Electrically Assisted Electromagnetic Forming.
- Published in:
- Advanced Engineering Materials, 2024, v. 26, n. 20, p. 1, doi. 10.1002/adem.202400798
- By:
- Publication type:
- Article
Effect and Mechanism of Electroshock Treatment on Microstructure and Mechanical Properties of (TiB+TiC)/Ti–6Al–4V Composite.
- Published in:
- Advanced Engineering Materials, 2024, v. 26, n. 20, p. 1, doi. 10.1002/adem.202400791
- By:
- Publication type:
- Article
Saturation of Grain Fragmentation upon Severe Plastic Deformation: Fact or Fiction?
- Published in:
- Advanced Engineering Materials, 2024, v. 26, n. 19, p. 1, doi. 10.1002/adem.202400578
- By:
- Publication type:
- Article
Effect of Heterogeneous Deformation on Microstructure and Microtexture Evolution of Ti‐6Al‐4V Alloy during Multidirectional Isothermal Forging.
- Published in:
- Advanced Engineering Materials, 2024, v. 26, n. 16, p. 1, doi. 10.1002/adem.202400956
- By:
- Publication type:
- Article
Enhancing Microstructural, Thermal, Mechanical, and Corrosion Response of a Bio/Eco‐Compatible Mg–2Zn–1Ca–0.3Mn Alloy Using Two Types of Cryogenic Treatments.
- Published in:
- Advanced Engineering Materials, 2024, v. 26, n. 16, p. 1, doi. 10.1002/adem.202400738
- By:
- Publication type:
- Article
Microstructural Evolution and Mechanical Properties of Cast Al–2.6Li–2.8Mg–(0.5, 1.4)Cu–0.2Zr–0.2Sc Alloys during Heat Treatment.
- Published in:
- Advanced Engineering Materials, 2024, v. 26, n. 16, p. 1, doi. 10.1002/adem.202400643
- By:
- Publication type:
- Article
Unveiling Enhanced Properties via Microstructural Evolution in Stir‐Cast Al6061 Composite Reinforced with AlCrFeNiTi High‐Entropy Alloy Particles.
- Published in:
- Advanced Engineering Materials, 2024, v. 26, n. 16, p. 1, doi. 10.1002/adem.202400516
- By:
- Publication type:
- Article
A Rolled Mg–8Al–1Sm–1Zn Alloy with High‐Strength Ductility via Single‐Pass Liner Rolling.
- Published in:
- Advanced Engineering Materials, 2024, v. 26, n. 6, p. 1, doi. 10.1002/adem.202301481
- By:
- Publication type:
- Article
Simultaneous Improvement of the Strength and Plasticity for Ti‐Reinforced Fine‐Grained Magnesium Matrix Composites Prepared by Powder Metallurgy.
- Published in:
- Advanced Engineering Materials, 2024, v. 26, n. 6, p. 1, doi. 10.1002/adem.202301349
- By:
- Publication type:
- Article
Analysis of Microstructure, Texture Evolution, and the Mechanism of Grain Refinement of Commercially Pure Titanium During Cold Rolling: Experiment and Simulation.
- Published in:
- Advanced Engineering Materials, 2024, v. 26, n. 5, p. 1, doi. 10.1002/adem.202301525
- By:
- Publication type:
- Article
Improving the Mechanical Properties of Low‐Carbon Steel by In Situ Strain Aging.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 24, p. 1, doi. 10.1002/adem.202301317
- By:
- Publication type:
- Article
Sintering Temperature Dependence of the Flexibility of ZrO<sub>2</sub>‐Modified Aluminum Titanate Flexible Ceramics.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 19, p. 1, doi. 10.1002/adem.202300256
- By:
- Publication type:
- Article
The Outstanding Contribution of Basal Slip in Substructure Development during Friction Stir Processing of Magnesium Alloys.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 17, p. 1, doi. 10.1002/adem.202300650
- By:
- Publication type:
- Article
The Synergistic Effects of Boron and Impression Creep Testing during Paced Controlling of Temperature for P91 Steels.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 16, p. 1, doi. 10.1002/adem.202300053
- By:
- Publication type:
- Article
Synergic Combination of Strength and Ductility through Both Grain Refinement and Precipitation in Al<sub>0.3</sub>CoCrNi Medium‐Entropy Alloy.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 15, p. 1, doi. 10.1002/adem.202201930
- By:
- Publication type:
- Article
Enhanced Wear and Corrosion Performances of Titanium Parts Fabricated by SLM Using Near‐Spherical Powder for Biomedical Applications.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 15, p. 1, doi. 10.1002/adem.202201672
- By:
- Publication type:
- Article
A Rapidly Degradable Extruded Mg-Y-Zn-Ni Alloy for Fracturing Tool Applications.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 12, p. 1, doi. 10.1002/adem.202201726
- By:
- Publication type:
- Article
Magnetic Field‐Assisted Laser Shock Peening of Ti<sub>6</sub>Al<sub>4</sub>V Alloy.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 10, p. 1, doi. 10.1002/adem.202201843
- By:
- Publication type:
- Article
Grain Refinement and Phase Transformation of Pure Titanium Foils During Asymmetrical Rolling.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 10, p. 1, doi. 10.1002/adem.202201761
- By:
- Publication type:
- Article
Magnetic Field‐Assisted Laser Shock Peening of Ti<sub>6</sub>Al<sub>4</sub>V Alloy.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 10, p. 1, doi. 10.1002/adem.202201843
- By:
- Publication type:
- Article
Mechanical Properties and Corrosion Behavior of Biodegradable Mg–0.5Zr–0.5Ca–xZn Magnesium Alloys.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 10, p. 1, doi. 10.1002/adem.202201778
- By:
- Publication type:
- Article
Effect of Friction Stir Processing on the Fatigue Performance of AZ31 Magnesium Alloy.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 10, p. 1, doi. 10.1002/adem.202201638
- By:
- Publication type:
- Article
A Tungsten Heavy Alloy with Enhanced Performance Prepared by Spark Plasma Sintering from Fine Spherical Tungsten Powders.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 5, p. 1, doi. 10.1002/adem.202200615
- By:
- Publication type:
- Article
Grain Refinement, Texture Evolution, and Tensile Performance Improvement of AZ91D Magnesium Alloy Processed by Multi‐Cycle Accumulative Back Extrusion.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 4, p. 1, doi. 10.1002/adem.202201084
- By:
- Publication type:
- Article
Effects of Zn Addition on Microstructural Evolution, Mechanical Properties, and Corrosion Resistance of Al‐6Mg Alloy Subjected to Equal Channel Angular Pressing Processing at 200 °C.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 2, p. 1, doi. 10.1002/adem.202200850
- By:
- Publication type:
- Article
Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting.
- Published in:
- Advanced Engineering Materials, 2022, v. 24, n. 10, p. 1, doi. 10.1002/adem.202200874
- By:
- Publication type:
- Article
Achieving Superplastic Elongations in an AZ80 Magnesium Alloy Processed by High‐Pressure Torsion.
- Published in:
- Advanced Engineering Materials, 2022, v. 24, n. 9, p. 1, doi. 10.1002/adem.202200620
- By:
- Publication type:
- Article
A Continuous Extrusion‐Shear (ES) Composite Process for Significantly Improving the Metallurgical Bonding and Textures Regulations and Grain Refinements of Al/Mg Bimetallic Composite Rods.
- Published in:
- Advanced Engineering Materials, 2022, v. 24, n. 6, p. 1, doi. 10.1002/adem.202200061
- By:
- Publication type:
- Article
Dynamic Mechanical Behavior and Microstructure of the Al<sub>0.1</sub>CoCrFeNiTi<sub>x</sub> High‐Entropy Alloys.
- Published in:
- Advanced Engineering Materials, 2022, v. 24, n. 6, p. 1, doi. 10.1002/adem.202101260
- By:
- Publication type:
- Article
Effect of Sintering Temperature on Microstructure and Mechanical Properties of AZ91 Magnesium Alloy via Spark Plasma Sintering.
- Published in:
- Advanced Engineering Materials, 2022, v. 24, n. 3, p. 1, doi. 10.1002/adem.202100905
- By:
- Publication type:
- Article
The Effect of Ultragrain Refinement on the Strength and Strain Rate Sensitivity of a ZK60 Magnesium Alloy.
- Published in:
- Advanced Engineering Materials, 2022, v. 24, n. 3, p. 1, doi. 10.1002/adem.202100846
- By:
- Publication type:
- Article
Study on the Fine Grain Size and Microhardness at the Interface of AZ31/Mg‐Y Composites.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 9, p. 1, doi. 10.1002/adem.202100214
- By:
- Publication type:
- Article
Facing the Issues of Sheet Metal Equal‐Channel Angular Pressing: A Modified Approach Using Stacks to Produce Ultrafine‐Grained High Ductility AA5083 Sheets.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 9, p. 1, doi. 10.1002/adem.202100244
- By:
- Publication type:
- Article
Improving Tension/Compression Asymmetry of a Hot‐Extruded Mg–Zn–Y–Zr Alloy via Yttrium Addition.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 9, p. 1, doi. 10.1002/adem.202100087
- By:
- Publication type:
- Article
Peritectic Solidification Kinetics and Mechanical Property Enhancement in a Rapidly Solidified Ti–48 at% Al–8 at% Nb Alloy via Hierarchical Twin Microstructure.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 8, p. 1, doi. 10.1002/adem.202100101
- By:
- Publication type:
- Article
Recent Developments and Novel Applications of Laser Shock Peening: A Review.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 7, p. 1, doi. 10.1002/adem.202001216
- By:
- Publication type:
- Article
Development of High Performance of Al Alloys via Cryo‐Forming: A Review.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 6, p. 1, doi. 10.1002/adem.202001533
- By:
- Publication type:
- Article
Controlled Interfacial Reactions and Superior Mechanical Properties of High Energy Ball Milled/Spark Plasma Sintered Ti–6Al–4V–Graphene Composite.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 6, p. 1, doi. 10.1002/adem.202001411
- By:
- Publication type:
- Article
Evolution of the Microstructure and Microsegregation in Subrapidly Solidified Mg–6Al–4Zn–1.2Sn Magnesium Alloy.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 2, p. 1, doi. 10.1002/adem.202000583
- By:
- Publication type:
- Article
Effects of Solidification Rates on Microstructure Refinement and Elemental Distribution of Ti44Al6Nb1.0Cr2.0V0.1B0.15Y Alloy by Rapid Solidification.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 2, p. 1, doi. 10.1002/adem.202000809
- By:
- Publication type:
- Article
Microstructure and Mechanical Properties of a Two‐Phase Mg–Li Alloy Processed By Constrained Groove Pressing.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 1, p. 1, doi. 10.1002/adem.202000614
- By:
- Publication type:
- Article
Effect of Microalloyed Al on Microstructure and Corrosion Behaviors of As‐Cast Mg–Zn–Y–Mn Alloys.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 1, p. 1, doi. 10.1002/adem.202000587
- By:
- Publication type:
- Article
Effect of Carbon in Severe Plastically Deformed Metals.
- Published in:
- Advanced Engineering Materials, 2020, v. 22, n. 12, p. 1, doi. 10.1002/adem.202000879
- By:
- Publication type:
- Article
Microstructural Evolution and Mechanical Properties of As‐Cast and As‐Extruded Mg–14Li Alloy with Different Zn/Y and Zn/Gd Addition.
- Published in:
- Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000480
- By:
- Publication type:
- Article
Effect of Hot Forging Process Parameters and Ce Addition on the Microstructure and Mechanical Properties of an As‐Forged AZ80 Alloy.
- Published in:
- Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000446
- By:
- Publication type:
- Article