Found: 1656
Select item for more details and to access through your institution.
EDTA-Jel’in Reciproc Eğenin Döngüsel Yorgunluk Direnci Üzerindeki Etkisinin Değerlendirilmesi: Metodolojik Çalışma.
- Published in:
- Turkiye Klinikleri Journal of Dental Sciences, 2024, v. 30, n. 3, p. 438, doi. 10.5336/dentalsci.2024-102018
- By:
- Publication type:
- Article
Rheology Deterioration and Damage Evaluation of SBS Modified Asphalt Under Two Salt Erosion Modes.
- Published in:
- Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 10, p. 13439, doi. 10.1007/s13369-023-08682-z
- By:
- Publication type:
- Article
In Vitro Comparison of Cyclic Fatigue Resistance of ProTaper Next and TruNatomy Endodontic Rotary Files.
- Published in:
- Journal of Pharmacy & Bioallied Sciences, 2024, v. 16, p. S2126, doi. 10.4103/jpbs.jpbs_107_24
- By:
- Publication type:
- Article
Fatigue Analysis of Woven Intraply Carbon/Kevlar Hybrid Composite Below Ambient Temperature.
- Published in:
- Mechanics of Composite Materials, 2024, v. 60, n. 4, p. 617, doi. 10.1007/s11029-024-10215-0
- By:
- Publication type:
- Article
Fatigue assessment on 7075/2A12 aluminum alloy friction stir welding lap joints.
- Published in:
- Journal of Mechanical Science & Technology, 2024, v. 38, n. 9, p. 4809, doi. 10.1007/s12206-024-0816-3
- By:
- Publication type:
- Article
Evaluation of Cyclic Fatigue Resistance of Novel Replica‐Like Instruments in Static Test Model.
- Published in:
- Applied Bionics & Biomechanics, 2024, v. 2024, p. 1, doi. 10.1155/2024/8842478
- By:
- Publication type:
- Article
SpaceX Starships Reusability Revolution: Mitigating Engine Failure Risks Through Advanced Failure Analysis.
- Published in:
- Journal of Failure Analysis & Prevention, 2024, v. 24, n. 4, p. 1501, doi. 10.1007/s11668-024-01943-5
- By:
- Publication type:
- Article
FATIGUE ANALYSIS BASED ON FATIGUE FAILURE APPROACH AND DAMAGE TOLERANT APPROACH IN CORONARY STENT DESIGN.
- Published in:
- Journal of the Serbian Society for Computational Mechanics, 2024, v. 18, n. 1, p. 130, doi. 10.24874/jsscm.2024.18.01.10
- By:
- Publication type:
- Article
Fatigue Strength of Drilled Glass Fiber/epoxy Laminates for Bone Fracture Fixation.
- Published in:
- Gazi University Journal of Science, 2024, v. 37, n. 3, p. 1451, doi. 10.35378/gujs.1357147
- By:
- Publication type:
- Article
The Effect of Boriding Treatment on the Fatigue Resistance of X70 Steel.
- Published in:
- Journal of Composite & Advanced Materials / Revue des Composites et des Matériaux Avancés, 2024, v. 34, n. 4, p. 505, doi. 10.18280/rcma.340412
- By:
- Publication type:
- Article
Low-Temperature Fabrication of BiFeO 3 Films on Aluminum Foils under a N 2 -Rich Atmosphere.
- Published in:
- Nanomaterials (2079-4991), 2024, v. 14, n. 16, p. 1343, doi. 10.3390/nano14161343
- By:
- Publication type:
- Article
Examining the Effects on a Fatigue Life of Preloaded Bolts in Flange Joints: An Overview.
- Published in:
- Metals (2075-4701), 2024, v. 14, n. 8, p. 883, doi. 10.3390/met14080883
- By:
- Publication type:
- Article
A Review of Sustainable Pavement Aggregates.
- Published in:
- Applied Sciences (2076-3417), 2024, v. 14, n. 16, p. 7113, doi. 10.3390/app14167113
- By:
- Publication type:
- Article
Evaluation of Selected Artificial Aging Protocols for Dental Composites Including Fatigue and Fracture Tests.
- Published in:
- Applied Sciences (2076-3417), 2024, v. 14, n. 16, p. 6964, doi. 10.3390/app14166964
- By:
- Publication type:
- Article
Microstructural and Textural Evolution in Hexagonal Close-Packed Metals: The Case of Zirconium, Magnesium, and Titanium.
- Published in:
- Crystals (2073-4352), 2024, v. 14, n. 8, p. 727, doi. 10.3390/cryst14080727
- By:
- Publication type:
- Article
Evaluation of Fatigue Damage Monitoring of Single-Lap Composite Adhesive Joint Using Conductivity.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 16, p. 2374, doi. 10.3390/polym16162374
- By:
- Publication type:
- Article
Wood Sponge for Oil–Water Separation.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 16, p. 2362, doi. 10.3390/polym16162362
- By:
- Publication type:
- Article
Optimizing Advanced High‐Strength Steel Joints via Regional Rapid Cooling in Resistance Spot Welding.
- Published in:
- Steel Research International, 2024, v. 95, n. 9, p. 1, doi. 10.1002/srin.202400232
- By:
- Publication type:
- Article
Effects of carburizing and nitriding sequential treatment on rolling contact fatigue of M50NiL bearing steel.
- Published in:
- Journal of Materials Science, 2024, v. 59, n. 32, p. 15545, doi. 10.1007/s10853-024-09905-w
- By:
- Publication type:
- Article
بررسی تجربی رفتار خستگی و تخمین نمودار تنش - عمر فوالد ا ی کس شصت و پنج.
- Published in:
- Modares Mechanical Engineering, 2024, v. 24, n. 5, p. 317
- By:
- Publication type:
- Article
A new approach to photochromic nanofiber‐based ultraviolet sensors with grayscale adaptation.
- Published in:
- Polymer Engineering & Science, 2024, v. 64, n. 9, p. 4246, doi. 10.1002/pen.26844
- By:
- Publication type:
- Article
Resilin in Insect Flight Systems.
- Published in:
- Advanced Functional Materials, 2024, v. 34, n. 35, p. 1, doi. 10.1002/adfm.202215162
- By:
- Publication type:
- Article
Glide Path in Endodontics: A Literature Review of Current Knowledge.
- Published in:
- Dentistry Journal, 2024, v. 12, n. 8, p. 257, doi. 10.3390/dj12080257
- By:
- Publication type:
- Article
Perforated and Composite Beam and Arch Design Optimization during Asymmetric Post-Buckling Deformation.
- Published in:
- Symmetry (20738994), 2024, v. 16, n. 8, p. 1050, doi. 10.3390/sym16081050
- By:
- Publication type:
- Article
Effects of Shot Peening Pressure, Time, and Material on the Properties of Carburized Steel Shafts.
- Published in:
- Materials (1996-1944), 2024, v. 17, n. 16, p. 4124, doi. 10.3390/ma17164124
- By:
- Publication type:
- Article
Research on the Prediction of Optimal Frequency for Vibration Mixing and Comparison on Initial Performance of Cold-Recycled Asphalt Emulsion Mixture.
- Published in:
- Materials (1996-1944), 2024, v. 17, n. 16, p. 4003, doi. 10.3390/ma17164003
- By:
- Publication type:
- Article
Acute Decrements in Performance and Recovery of the Distal Musculature with Automated Blood Flow Occlusion in the Proximal Limb.
- Published in:
- Journal of Exercise Physiology Online, 2023, v. 26, n. 1, p. 40
- By:
- Publication type:
- Article
Mechanical Resistance of a 2.9-mm-Diameter Dental Implant With a Morse-Taper Implant-Abutment Connection.
- Published in:
- Journal of Oral Implantology, 2023, v. 49, n. 3, p. 323, doi. 10.1563/aaid-joi-D-21-00258
- By:
- Publication type:
- Article
Implant Restorative Options in the Esthetic Zone: Anodized Versus Zirconia Abutments.
- Published in:
- 2022
- By:
- Publication type:
- Case Study
The Effect of Thermal Ageing on the Fatigue Resistance of Hydrogenated Acrylonitrile Butadiene Rubber (HNBR) Compounds.
- Published in:
- Advances in Polymer Science, 2023, v. 289, p. 143, doi. 10.1007/12_2022_122
- By:
- Publication type:
- Article
Effects of process parameters on fatigue behavior and surface integrity of tool steel produced by electrical discharge turning.
- Published in:
- Materialwissenschaft und Werkstoffechnik, 2023, v. 54, n. 1, p. 36, doi. 10.1002/mawe.202200119
- By:
- Publication type:
- Article
The influence of roller burnishing process parameters on surface quality and fatigue life of AA 7075‐T6 alloy.
- Published in:
- Materialwissenschaft und Werkstoffechnik, 2022, v. 53, n. 5, p. 608, doi. 10.1002/mawe.202100291
- By:
- Publication type:
- Article
Fatigue Behaviors and Dislocation Evolution of Copper and Aluminum Alloy.
- Published in:
- Advanced Engineering Materials, 2024, v. 26, n. 13, p. 1, doi. 10.1002/adem.202400404
- By:
- Publication type:
- Article
A Study of Microstructural Tensile and Fatigue Properties Coupled with Digital Image Correlation of Hybrid Manufactured Inconel 718 Parts by Extrusion and Powder Bed Fusion.
- Published in:
- Advanced Engineering Materials, 2024, v. 26, n. 13, p. 1, doi. 10.1002/adem.202400098
- By:
- Publication type:
- Article
3D Printing of Branched Polyurethane with Tough Mechanical Properties for Stretchable Sensors.
- Published in:
- Advanced Engineering Materials, 2024, v. 26, n. 1, p. 1, doi. 10.1002/adem.202301103
- By:
- Publication type:
- Article
Effect of Heat Treatment on Interface Behavior and Fatigue Property of 316L/2Cr13 Multilayered Steel.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 24, p. 1, doi. 10.1002/adem.202301234
- By:
- Publication type:
- Article
Influence of α‐Precipitate Orientation and Distribution on the Deformation Behavior of the Additively Manufactured Metastable β‐Titanium Alloy Ti‐5553 Assessed by Cyclic Nanoindentation.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 21, p. 1, doi. 10.1002/adem.202301095
- By:
- Publication type:
- Article
Fatigue Resistance of an Anodized and Hardanodized 6082 Aluminum Alloy Depending on the Coating Thickness in the High Cycle Regime.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 20, p. 1, doi. 10.1002/adem.202300394
- By:
- Publication type:
- Article
Investigation on the Fatigue Behaviors of Maraging Steel at Different Stress Ratios.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 19, p. 1, doi. 10.1002/adem.202300712
- By:
- Publication type:
- Article
Fabrication of TC4/TiCp New Hip Prosthesis by Laser Cladding.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 19, p. 1, doi. 10.1002/adem.202300517
- By:
- Publication type:
- Article
High Cycle Fatigue Property of Al–Mg–Sc–Zr Alloy Fabricated by Laser Powder Bed Fusion.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 17, p. 1, doi. 10.1002/adem.202300352
- By:
- Publication type:
- Article
3D Investigation of Damage During Strain‐Controlled Thermomechanical Fatigue of Cast Al–Si Alloys.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 17, p. 1, doi. 10.1002/adem.202300339
- By:
- Publication type:
- Article
Structural Materials.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 15, p. 1, doi. 10.1002/adem.202300890
- By:
- Publication type:
- Article
Fatigue Strength Assessment of Laser Beam Welded Joints Made of AA7075 and Magnetic Pulse Welded Joints Made of AA7075 and 3D‐Printed AlSi10Mg.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 15, p. 1, doi. 10.1002/adem.202300108
- By:
- Publication type:
- Article
Air Cooling Martensites—The Future of Carbon Neutral Steel Forgings?
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 15, p. 1, doi. 10.1002/adem.202201931
- By:
- Publication type:
- Article
Effects of Prestrain and Baking on the Tensile and Fatigue Properties of Fe–0.1C–5Mn Transformation‐Induced Plasticity Steel.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 15, p. 1, doi. 10.1002/adem.202201929
- By:
- Publication type:
- Article
Improving the Defect Tolerance and Fatigue Strength of AM AlSi10Mg.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 15, p. 1, doi. 10.1002/adem.202201855
- By:
- Publication type:
- Article
Dielectric and Energy Storage Properties of Layer‐Structured Ba<sub>n−3</sub>Bi<sub>4</sub>Ti<sub>n</sub>O<sub>3n+3</sub> (n = 4–7) Ferroelectrics.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 10, p. 1, doi. 10.1002/adem.202201677
- By:
- Publication type:
- Article
Life Prediction for Directed Energy Deposition‐Manufactured 316L Stainless Steel using a Coupled Crystal Plasticity–Machine Learning Framework.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 10, p. 1, doi. 10.1002/adem.202201429
- By:
- Publication type:
- Article
A State‐of‐Art Review on Prediction Model for Fatigue Performance of Welded Joints via Data‐Driven Method.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 9, p. 1, doi. 10.1002/adem.202201430
- By:
- Publication type:
- Article