Found: 47
Select item for more details and to access through your institution.
Cracking and Precipitation Behavior of Refractory BCC–B2 Alloys Under Laser Melting Conditions.
- Published in:
- Metallurgical & Materials Transactions. Part A, 2024, v. 55, n. 10, p. 3809, doi. 10.1007/s11661-024-07541-2
- By:
- Publication type:
- Article
Thermal and Elastic Properties of an A2/B2 Refractory High Entropy Superalloy and Its Constituent Phases.
- Published in:
- Metallurgical & Materials Transactions. Part A, 2024, v. 55, n. 8, p. 2704, doi. 10.1007/s11661-024-07429-1
- By:
- Publication type:
- Article
Enhanced Plasticity via Kinking in Cubic Metallic Nanolaminates.
- Published in:
- Advanced Engineering Materials, 2015, v. 17, n. 6, p. 781, doi. 10.1002/adem.201400324
- By:
- Publication type:
- Article
Grain-Scale Stress States in Microtextured Ti64: Implications for Dwell Fatigue.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2022, v. 74, n. 10, p. 3709, doi. 10.1007/s11837-022-05423-9
- By:
- Publication type:
- Article
Recent Developments in Femtosecond Laser-Enabled TriBeam Systems.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2021, v. 73, n. 12, p. 4258, doi. 10.1007/s11837-021-04919-0
- By:
- Publication type:
- Article
3D Grain Shape Generation in Polycrystals Using Generative Adversarial Networks.
- Published in:
- Integrating Materials & Manufacturing Innovation, 2022, v. 11, n. 1, p. 71, doi. 10.1007/s40192-021-00244-1
- By:
- Publication type:
- Article
Mechanical Metrics of Virtual Polycrystals (MechMet).
- Published in:
- Integrating Materials & Manufacturing Innovation, 2021, v. 10, n. 2, p. 265, doi. 10.1007/s40192-021-00206-7
- By:
- Publication type:
- Article
Three-dimensional Analysis and Reconstruction of Additively Manufactured Materials in the Cloud-Based BisQue Infrastructure.
- Published in:
- Integrating Materials & Manufacturing Innovation, 2019, v. 8, n. 1, p. 37, doi. 10.1007/s40192-019-00126-7
- By:
- Publication type:
- Article
BisQue for 3D Materials Science in the Cloud: Microstructure–Property Linkages.
- Published in:
- Integrating Materials & Manufacturing Innovation, 2019, v. 8, n. 1, p. 52, doi. 10.1007/s40192-019-00128-5
- By:
- Publication type:
- Article
BisQue for 3D Materials Science in the Cloud: Microstructure–Property Linkages.
- Published in:
- Integrating Materials & Manufacturing Innovation, 2019, v. 8, n. 1, p. 52, doi. 10.1007/s40192-019-00128-5
- By:
- Publication type:
- Article
Oxide-Assisted Degradation of Ni-Base Single Crystals During Cyclic Loading: the Role of Coatings.
- Published in:
- Journal of the American Ceramic Society, 2011, v. 94, p. s136, doi. 10.1111/j.1551-2916.2011.04578.x
- By:
- Publication type:
- Article
Adaptable physics-based super-resolution for electron backscatter diffraction maps.
- Published in:
- NPJ Computational Materials, 2022, v. 8, n. 1, p. 1, doi. 10.1038/s41524-022-00924-2
- By:
- Publication type:
- Article
Expanded dataset of mechanical properties and observed phases of multi-principal element alloys.
- Published in:
- Scientific Data, 2020, v. 7, n. 1, p. 1, doi. 10.1038/s41597-020-00768-9
- By:
- Publication type:
- Article
A defect-resistant Co–Ni superalloy for 3D printing.
- Published in:
- Nature Communications, 2020, v. 11, n. 1, p. N.PAG, doi. 10.1038/s41467-020-18775-0
- By:
- Publication type:
- Article
High Temperature B2 Precipitation in Ru-Containing Refractory Multi-principal Element Alloys.
- Published in:
- Metallurgical & Materials Transactions. Part A, 2024, v. 55, n. 6, p. 1739, doi. 10.1007/s11661-024-07368-x
- By:
- Publication type:
- Article
Foreword: "Eurosuperalloys 2022".
- Published in:
- Metallurgical & Materials Transactions. Part A, 2023, v. 54, n. 5, p. 1455, doi. 10.1007/s11661-023-07021-z
- By:
- Publication type:
- Article
Minor Elements and Solidification Cracking During Laser Powder-Bed Fusion of a High γ′ CoNi-Base Superalloy.
- Published in:
- Metallurgical & Materials Transactions. Part A, 2023, v. 54, n. 5, p. 1744, doi. 10.1007/s11661-023-06957-6
- By:
- Publication type:
- Article
Microstructure Evolution and Tensile Properties of a Selectively Laser Melted CoNi-Base Superalloy.
- Published in:
- Metallurgical & Materials Transactions. Part A, 2022, v. 53, n. 8, p. 2943, doi. 10.1007/s11661-022-06716-z
- By:
- Publication type:
- Article
Microstructure-Based Estimation of Strength and Ductility Distributions for α+β Titanium Alloys.
- Published in:
- Metallurgical & Materials Transactions. Part A, 2021, v. 52, n. 6, p. 2411, doi. 10.1007/s11661-021-06233-5
- By:
- Publication type:
- Article
Editorial: 50 Years of High Impact Research.
- Published in:
- 2020
- By:
- Publication type:
- Editorial
Low Cycle Fatigue of Single Crystal γ′-containing Co-based Superalloys at 750∘C.
- Published in:
- Metallurgical & Materials Transactions. Part A, 2020, v. 51, n. 1, p. 200, doi. 10.1007/s11661-019-05508-2
- By:
- Publication type:
- Article
Oxidation Behavior Across Composition Space Relevant to Co-based γ/γ′ Alloys.
- Published in:
- Metallurgical & Materials Transactions. Part A, 2019, v. 50, n. 11, p. 5445, doi. 10.1007/s11661-019-05413-8
- By:
- Publication type:
- Article
Competing Modes for Crack Initiation from Non-metallic Inclusions and Intrinsic Microstructural Features During Fatigue in a Polycrystalline Nickel-Based Superalloy.
- Published in:
- Metallurgical & Materials Transactions. Part A, 2018, v. 49, n. 9, p. 3865, doi. 10.1007/s11661-018-4780-3
- By:
- Publication type:
- Article
Creep Behavior of Quinary γ′-Strengthened Co-Based Superalloys.
- Published in:
- Metallurgical & Materials Transactions. Part A, 2018, v. 49, n. 9, p. 4090, doi. 10.1007/s11661-018-4768-z
- By:
- Publication type:
- Article
Elastic Properties of Novel Co- and CoNi-Based Superalloys Determined through Bayesian Inference and Resonant Ultrasound Spectroscopy.
- Published in:
- Metallurgical & Materials Transactions. Part A, 2018, v. 49, n. 6, p. 2324, doi. 10.1007/s11661-018-4575-6
- By:
- Publication type:
- Article
Partitioning of Solute to the Primary α-Mg Phase in Creep-Resistant Mg-Al-Ca–Based Cast Alloys.
- Published in:
- Metallurgical & Materials Transactions. Part A, 2010, v. 41, n. 9, p. 2435, doi. 10.1007/s11661-010-0271-x
- By:
- Publication type:
- Article
Deformation and Strain Storage Mechanisms during High-Temperature Compression of a Powder Metallurgy Nickel-Base Superalloy.
- Published in:
- Metallurgical & Materials Transactions. Part A, 2010, v. 41, n. 8, p. 2002, doi. 10.1007/s11661-010-0251-1
- By:
- Publication type:
- Article
Formation of Secondary Reaction Zones in Diffusion Aluminide-Coated Ni-Base Single-Crystal Superalloys Containing Ruthenium.
- Published in:
- Metallurgical & Materials Transactions. Part A, 2008, v. 39, n. 7, p. 1647, doi. 10.1007/s11661-008-9534-1
- By:
- Publication type:
- Article
Boundary characterization using 3D mapping of geometrically necessary dislocations in AM Ta microstructure.
- Published in:
- Journal of Materials Science, 2022, v. 57, n. 21, p. 9885, doi. 10.1007/s10853-022-07074-2
- By:
- Publication type:
- Article
Enhancing Thermoelectric Properties through Control of Nickel Interstitials and Phase Separation in Heusler/Half-Heusler TiNi1.1Sn Composites.
- Published in:
- Materials (1996-1944), 2018, v. 11, n. 6, p. 903, doi. 10.3390/ma11060903
- By:
- Publication type:
- Article
Materials design for hypersonics.
- Published in:
- Nature Communications, 2024, v. 15, n. 1, p. 1, doi. 10.1038/s41467-024-46753-3
- By:
- Publication type:
- Article
Editorial: 50 Years of High Impact Research.
- Published in:
- 2020
- By:
- Publication type:
- Editorial
Materials Research at the University of California, Santa Barbara.
- Published in:
- Advanced Materials, 2011, v. 23, n. 20, p. 2256, doi. 10.1002/adma.201101196
- By:
- Publication type:
- Article
A New Femtosecond Laser-Based Tomography Technique for Multiphase Materials.
- Published in:
- Advanced Materials, 2011, v. 23, n. 20, p. 2339, doi. 10.1002/adma.201003600
- By:
- Publication type:
- Article
Observations of Damage, Defects, and Structuring in Femtosecond Laser Ablated Surfaces.
- Published in:
- 2022
- By:
- Publication type:
- Abstract
Defect Characterization using Transmission Scanning Electron Microscopy.
- Published in:
- Microscopy & Microanalysis, 2019, p. 1836, doi. 10.1017/S1431927618009662
- By:
- Publication type:
- Article
Custom Scan Control and Time Resolved Signal Acquisition for High Resolution SEM Imaging.
- Published in:
- Microscopy & Microanalysis, 2019, p. 536, doi. 10.1017/S1431927618003173
- By:
- Publication type:
- Article
Defect Characterization using Transmission Scanning Electron Microscopy.
- Published in:
- 2018
- By:
- Publication type:
- Abstract
Custom Scan Control and Time Resolved Signal Acquisition for High Resolution SEM Imaging.
- Published in:
- 2018
- By:
- Publication type:
- Abstract
Reconstruction of Laser-Induced Surface Topography from Electron Backscatter Diffraction Patterns.
- Published in:
- Microscopy & Microanalysis, 2017, v. 23, n. 4, p. 730, doi. 10.1017/S1431927617012326
- By:
- Publication type:
- Article
Sub-nanometer Resolution Chemi-STEM EDS Mapping of Superlattice Intrinsic Stacking Faults in Co-based Superalloys.
- Published in:
- Microscopy & Microanalysis, 2014, v. 20, n. S3, p. 1028, doi. 10.1017/S1431927614006862
- By:
- Publication type:
- Article
RECENT ADVANCES IN ADDITIVE MANUFACTURING OF HIGH STRENGTH 7000 SERIES ALUMINUM.
- Published in:
- Advanced Materials & Processes, 2018, v. 176, n. 1, p. 18, doi. 10.31399/asm.amp.2018-01.p018
- By:
- Publication type:
- Article
Three-dimensional texture visualization approaches: applications to nickel and titanium alloys.
- Published in:
- Journal of Applied Crystallography, 2017, v. 50, n. 5, p. 1267, doi. 10.1107/S1600576717010470
- By:
- Publication type:
- Article
Three-dimensional texture visualization approaches: theoretical analysis and examples.
- Published in:
- Journal of Applied Crystallography, 2017, v. 50, n. 2, p. 430, doi. 10.1107/S1600576717001157
- By:
- Publication type:
- Article
Quantitative voxel-to-voxel comparison of TriBeam and DCT strontium titanate three-dimensional data sets.
- Published in:
- Journal of Applied Crystallography, 2015, v. 48, n. 4, p. 1034, doi. 10.1107/S1600576715009231
- By:
- Publication type:
- Article
Role of Aluminum in Hot-Rolled Ultra-Low-Carbon Nb-lnterstitiaI-Free Steels.
- Published in:
- Metallurgical & Materials Transactions. Part A, 2006, v. 37, n. 12, p. 3737
- By:
- Publication type:
- Article
Displacement Mapping During In-Situ Straining in the SEM.
- Published in:
- Microscopy & Microanalysis, 1999, p. 334, doi. 10.1017/S1431927600014999
- By:
- Publication type:
- Article