We found a match
Your institution may have rights to this item. Sign in to continue.
- Title
DCMD modelling and experimental study using PTFE membrane.
- Authors
Nakoa, Khaled; Date, Abhijit; Akbarzadeh, Aliakbar
- Abstract
This research work aims to investigate the performance of direct contact membrane distillation (MD) unit under different conditions. A mathematical model was developed to evaluate the experimental values of the membrane water mass flux, heat transfer coefficients, the membrane/liquid interface temperatures, the temperature polarisation coefficient and the evaporation efficiency. This model was solved numerically using MATLAB®software, and its results were used to predict the actual performance of the membrane unit. The MD coefficient was evaluated from the computer model data and was subsequently used to estimate water fluxes. Experimental tests were performed using 0.0572 m2of PTFE membrane manufactured by membrane solution (85% porosity, 45 μm thickness, 0.22 μm nominal pore size). Feed solutions were aqueous NaCl solutions with 1,000–200,000 mg/L (0.1–20%) in concentration and its temperatures were 40–80°C, and feed flow rate was 2 L/min. The temperature and flow rate of permeate water was fixed at 20°C and 3 L/min, respectively. The experimental observation showed that the vapour mass flux through the membrane pores increased with feed temperature, but decreased with feed concentration. It was found that the predicted mass fluxes agreed reasonably with the experimental data, except at a high feed concentration. The temperature polarisation coefficients increased with concentration and decreased with increasing temperature. The membrane heat transfer rates and the permeate flux have been discussed in this paper.
- Subjects
MEMBRANE distillation; HEAT transfer; WATER masses; POROSITY; POLARIZATION (Nuclear physics)
- Publication
Desalination & Water Treatment, 2016, Vol 57, Issue 9, p3835
- ISSN
1944-3994
- Publication type
Article
- DOI
10.1080/19443994.2014.989272